A.1 Options Summarized by Function

In this section, the compiler options are grouped by function to provide a quick reference. For a detailed description of each option, refer to Appendix B, C Compiler Options Reference. Some flags serve more than one purpose and appear more than once.

The options apply to all platforms except as noted. Features that are unique to SPARC-based systems are identified as (SPARC), and the features that are unique to x86/x64–based systems are identified as (x86). Options that apply to Oracle Solaris platforms only are marked (Solaris). Options for Linux-only platforms are marked (Linux).

A.1.1 Optimization and Performance Options

Table A-1 Optimization and Performance Options

Option	Action
`-fast`	Selects the optimum combination of compilation options for speed of executable code.
`-fma`	(SPARC) Enables automatic generation of floating-point, fused, multiply-add instructions.
`-library=sunperf`	Link with the Sun Performance Library
`-p`	Prepares the object code to collect data for profiling
`-xalias_level`	Enables the compiler to perform type-based alias analysis and optimizations.
`-xannotate`	(Solaris) Instructs the compiler to create binaries that can be used by the optimization and observability tools binopt(1), code-analyzer(1), discover(1), collect(1), and uncover(1)
`-xbinopt`	Prepares the binary for later optimizations, transformations and analysis.
`-xbuiltin`	Improve the optimization of code that calls standard library functions.
`-xdepend`	Analyzes loops for inter-iteration data dependencies and does loop restructuring.
`-xF`	Enables reordering of data and functions by the linker.
`-xhwcprof`	(SPARC) Enables compiler support for hardware counter-based profiling.
`-xinline`	Tries to inline only those functions specified.
`-xinstrument`	Compiles and instruments your program for analysis by the Thread Analyzer.
`-xipo`	Performs whole-program optimizations by invoking an interprocedural analysis component.
`-xipo_archive`	Allows crossfile optimization to include archive (.a) libraries.
`-xkeepframe`	Prohibit stack related optimizations for the named functions
`-xjobs`	Sets how many processes the compiler creates.
`-xlibmil`	Inlines some library routines for faster execution.
`-xlic_lib=sunperf`	Obsolete. Use `-library=sunperf` to link to the Sun Performance Library.
`-xlinkopt`	Performs link-time optimizations on relocatable object files.
`-xlibmopt`	Enable library of optimized math routines.
`-xmaxopt`	Limits the level of `pragma` `opt` to the level specified.
`-xnolibmil`	Does not inline math library routines.
`-xnolibmopt`	Do not enable library of optimized math routines.
`-xO`	Optimizes the object code.
`-xnorunpath`	Prevents inclusion of a runtime search path for shared libraries in the executable.
`-xpagesize`	Sets the preferred page size for the stack and the heap.
`-xpagesize_stack`	Sets the preferred page size for the stack.
`-xpagesize_heap`	Sets the preferred page size for the heap.
`-xpch`	Reduces compile time for applications whose source files share a common set of include files.
`-xpec`	Generates a Portable Executable Code (PEC) binary which can be used with additional tuning and troubleshooting..
`-xpchstop`	Can be used in conjunction with `-xpch` to specify the last include file of the viable prefix.
`-xprefetch`	Enable prefetch instructions.
`-xprefetch_level`	Control the aggressiveness of automatic insertion of prefetch instructions as set by `-xprefetch=auto`
`-xprefetch_auto_type`	Controls how indirect prefetches are generated.
`-xprofile`	Collects data for a profile or uses a profile to optimize.
`-xprofile_ircache`	Improves compilation time of `-xprofile=use` phase by reusing compilation data saved from the `-xprofile=collect` phase
`-xprofile_pathmap`	Support for multiple programs or shared libraries in a single profile directory.
`-xrestrict`	Treats pointer-valued function parameters as restricted pointers.
`-xsafe`	(SPARC) Allows the compiler to assume no memory-based traps occur.
`-xspace`	Does no optimizations or parallelization of loops that increase code size.
`-xunroll`	Suggests to the optimizer to unroll loops `n` times.

A.1.2 Compile-Time and Link-Time Options

The following table lists the options that must be specified both at link-time and at compile-time.

Table A-2 Compile-Time and Link-Time Options

Option	Action
`-fast`	Selects the optimum combination of compilation options for speed of executable code.
`-m32` \| `-m64`	Specifies the memory model for the compiled binary object.
`-mt`	Macro option that expands to `-D_REENTRANT` `-lthread`.
`-p`	Prepares the object code to collect data for profiling with `prof`(1)
`-xarch`	Specify instruction set architecture.
`-xautopar`	Enables automatic parallelization for multiple processors.
`-xhwcprof`	(SPARC) Enables compiler support for hardware counter-based profiling.
`-xipo`	Performs whole-program optimizations by invoking an interprocedural analysis component.
`-xlinkopt`	Performs link-time optimizations on relocatable object files.
`-xmemalign`	(SPARC) Specify maximum assumed memory alignment and behavior of misaligned data accesses.
`-xopenmp`	Supports the OpenMP interface for explicit parallelization including a set of source code directives, run-time library routines, and environment variables
`-xpagesize`	Sets the preferred page size for the stack and the heap.
`-xpagesize_stack`	Sets the preferred page size for the stack.
`-xpagesize_heap`	Sets the preferred page size for the heap.
`-xpg`	Prepares the object code to collect data for profiling with `gprof`(1).
`-xprofile`	Collects data for a profile or uses a profile to optimize.
`-xvector=lib`	Enable automatic generation of calls to the vector library functions.

A.1.3 Data-Alignment Options

Table A-3 Data-Alignment Options

Option	Action
`-xchar_byte_order`	Produce an integer constant by placing the characters of a multi-character character-constant in the specified byte order.
`-xdepend`	Analyzes loops for inter-iteration data dependencies and does loop restructuring.
`-xmemalign`	(SPARC) Specify maximum assumed memory alignment and behavior of misaligned data accesses.
`-xopenmp`	Supports the OpenMP interface for explicit parallelization including a set of source code directives, run-time library routines, and environment variables

A.1.4 Numerics and Floating-Point Options

Table A-4 Numerics and Floating-Point Options

Option	Action
`-flteval`	(x86) Controls floating point evaluation.
`-fma`	(SPARC) Enables automatic generation of floating-point, fused, multiply-add instructions.
`-fnonstd`	Causes nonstandard initialization of floating-point arithmetic hardware.
`-fns`	Turns on nonstandard floating-point mode.
`-fprecision`	(x86) Initializes the rounding-precision mode bits in the Floating-point Control Word
`-fround`	Sets the IEEE 754 rounding mode that is established at runtime during the program initialization.
`-fsimple`	Allows the optimizer to make simplifying assumptions concerning floating-point arithmetic.
`-fsingle`	Causes the compiler to evaluate `float` expressions as single precision rather than double precision.
`-fstore`	(x86) Causes the compiler to convert the value of a floating-point expression or function to the type on the left-hand side of an assignment
`-ftrap`	Sets the IEEE 754 trapping mode in effect at startup.
`-nofstore`	(x86) Does not convert the value of a floating-point expression or function to the type on the left-hand side of an assignment
`-xdepend`	Analyzes loops for inter-iteration data dependencies and does loop restructuring.
`-xlibmieee`	Forces IEEE 754 style return values for math routines in exceptional cases.
`-xsfpconst`	Represents unsuffixed floating-point constants as single precision
`-xvector`	Enable automatic generation of calls to the vector library functions.

A.1.5 Parallelization Options

Table A-5 Parallelization Options

Option	Action
`-mt`	Macro option that expands to `-D_REENTRANT` `-lthread`.
`-xautopar`	Enablesautomatic parallelization for multiple processors.
`-xcheck`	Adds runtime checks for stack overflow and initializes local variables.
`-xdepend`	Analyzes loops for inter-iteration data dependencies and does loop restructuring.
`-xloopinfo`	Shows which loops are parallelized and which are not.
`-xopenmp`	Supports the OpenMP interface for explicit parallelization including a set of source code directives, run-time library routines, and environment variables
`-xreduction`	Enablesreduction recognition during automatic parallelization.
`-xrestrict`	Treats pointer-valued function parameters as restricted pointers.
`-xvpara`	Warns about loops that have `#pragma` `MP` directives specified but might not be properly specified for parallelization.
`-xthreadvar`	Controls the implementation of thread local variables.
`-Zll`	Creates the program database for `lock_lint`, but does not generate executable code.

A.1.6 Source Code Options

Table A-6 Source Code Options

Option	Action
`-A`	Associates `name` as a predicate with the specified tokens as if by a `#assert` preprocessing directive.
`-C`	Prevents the preprocessor from removing comments, except those on the preprocessing directive lines.
`-D`	Associates `name` with the specified tokens as if by a `#define` preprocessing directive.
`-E`	Runs the source file through the preprocessor only and sends the output to `stdout`.
`-fd`	Reports K&R-style function definitions and declarations.
`-H`	Prints to standard error, one per line, the path name of each file included during the current compilation.
`-I`	Adds directories to the list that is searched for `#include` files with relative file names.
`-include`	Causes the compiler to treat the argument `filename` as if it appears in the first line of a primary source file as a `#include` preprocessor directive.
`-P`	Runs the source file through the C preprocessor only.
`-U`	Removes any initial definition of the preprocessor symbol `name`.
`-X`	The `-X` options specify varying degrees of compliance to the ISO C standard.
`-xCC`	Accepts the C++-style comments.
`-xc99`	Controls compiler recognition of supported C99 features.
`-xchar`	Helps with migration from systems where char is defined as unsigned.
`-xcsi`	Allows the C compiler to accept source code written in locales that do not conform to the ISO C source character code requirements
`-xM`	Runs only the preprocessor on the named C programs, requesting that it generate makefile dependencies and send the result to the standard output
`-xM1`	Collects dependencies like `-xM`, but excludes `/usr/include` files.
`-xMD`	Generates makefile dependencies like `-xM` but includes compilation.
`-xMF`	Specifies a filename which stores makefile dependency information.
`-xMMD`	Generates makefile dependencies but excludes system headers.
`-xP`	Prints prototypes for all K&R C functions defined in this module
`-xpg`	Prepares the object code to collect data for profiling with `gprof`(1).
`-xtrigraphs`	Determines recognition of trigraph sequences.
`-xustr`	Enables recognition of string literals composed of sixteen-bit characters.

A.1.7 Compiled Code Options

Table A-7 Compiled Code Options

Option	Action
`-c`	Directs the compiler to suppress linking with `ld`(1) and to produce a `.o` file in the current working directory for each source file
`-o`	Names the output file
`-S`	Directs the compiler to produce an assembly source file but not to assemble the program.

A.1.8 Compilation Mode Options

Table A-8 Compilation Mode Options

Option	Action
`-#`	Enables verbose mode, which shows how command options expand and shows each component as it is invoked.
`-###`	Shows each component as it would be invoked, but does not actually execute it. Also shows how command options expand.
`-features`	Enables or disables various C-language features.
`-keeptmp`	Retains temporary files created during compilation instead of deleting them automatically.
`-V`	Directs `cc` to print the name and version ID of each component as the compiler executes.
`-W`	Passes arguments to C compilation-system components.
`-X`	The `-X` options specify varying degrees of compliance to the ISO C standard.
`-xc99`	Controls compiler recognition of supported C99 features.
`-xchar`	Preserves the sign of a char
`-xhelp`	Displays on-line help information.
`-xjobs`	Sets how many processes the compiler creates.
`-xpch`	Reduces compile time for applications whose source files share a common set of include files.
`-xpchstop`	Can be used in conjunction with `-xpch` to specify the last include file of the viable prefix.
`-xtemp`	Sets the directory for temporary files used by `cc` to `dir`.
`-xtime`	Reports the time and resources used by each compilation component.
`-Y`	Specifies a new directory for the location of a C compilation-system component.
`-YA`	Changes the default directory searched for components.
`-YI`	Changes the default directory searched for include files.
`-YP`	Changes the default directory for finding library files.
`-YS`	Changes the default directory for startup object files.

A.1.9 Diagnostic Options

Table A-9 Diagnostic Options

Option	Action
`-errfmt`	Prefix error messages with string “error:” for ready distinction from warning messages.
`-errhdr`	Limits the warnings from header files to a specified group.
`-erroff`	Suppresses compiler warning messages.
`-errshort`	Control how much detail is in the error message produced by the compiler when it discovers a type mismatch.
`-errtags`	Displays the message tag for each warning message.
`-errwarn`	If the indicated warning message is issued, cc exits with a failure status.
`-v`	Directs the compiler to perform stricter semantic checks and to enable other `lint`-like checks.
`-w`	Suppresses compiler warning messages.
`-xe`	Performs only syntax and semantic checking on the source file, but does not produce any object or executable code.
`-xtransition`	Issues warnings for the differences between K&R C and Oracle Solaris Studio ISO C.
`-xvpara`	Warns about loops that have `#pragma` `MP` directives specified but might not be properly specified for parallelization.

A.1.10 Debugging Options

Table A-10 Debugging Options

Option	Action
`-xcheck`	Adds runtime checks for stack overflow and initializes local variables.
`-g`	Produces additional symbol table information for the debugger.
`-g3`	Produces addition debugging information.
`-s`	Removes all symbolic debugging information from the output object file.
`-xdebugformat`	Generates debugging information in dwarf format instead of stabs format.
`-xpagesize`	Sets the preferred page size for the stack and the heap.
`-xpagesize_stack`	Sets the preferred page size for the stack.
`-xpagesize_heap`	Sets the preferred page size for the heap.
`-xs`	Disables Auto-Read of object files for `dbx`.
`-xvis`	(SPARC) Enables compiler recognition of the assembly-language templates defined in the VIS instruction set

A.1.11 Linking and Libraries Options

Table A-11 Linking and Libraries Options Table

Option	Action
`-B`	Specifies whether bindings of libraries for linking are `static` or `dynamic`.
`-d`	Specifies dynamic or static linking in the link editor.
`-G`	Passes the option to the link editor to produce a shared object rather than a dynamically linked executable.
`-h`	Assigns a name to a shared dynamic library as a way to have different versions of a library.
`-i`	Passes the option to the linker to ignore any `LD_LIBRARY_PATH` setting.
`-L`	Adds directories to the list that the linker searches for libraries.
`-l`	Links with object library `libname.so`, or `libname.a`.
`-mc`	Removes duplicate strings from the `.comment` section of the object file.
`-mr`	Removes all strings from the `.comment` section. Can also insert a `string` in that section of the object file.
`-Q`	Determines whether to emit identification information to the output file.
`-R`	Passes a colon-separated list of directories used to specify library search directories to the runtime linker.
`-xMerge`	Merges data segments into text segments.
`-xcode`	Specify code address space.
`-xldscope`	Controls the default scope of variable and function definitions to create faster and safer shared libraries.
`-xnolib`	Does not link any libraries by default
`-xnolibmil`	Does not inline math library routines.
`-xstrconst`	This option may be deprecated in a future release. Use `-features=[no%]conststrings` instead. Inserts string literals into the read-only data section of the text segment instead of the default data segment.

A.1.12 Target Platform Options

Table A-12 Target Platform Options

Option	Action
`-m32` \|`-m64`	Specifies the memory model for the compiled binary object.
`-xarch`	Specify instruction set architecture.
`-xcache`	Defines the cache properties for use by the optimizer.
`-xchip`	Specifies the target processor for use by the optimizer.
`-xregs`	Specifies the usage of registers for the generated code.
`-xtarget`	Specifies the target system for instruction set and optimization.

A.1.13 x86-Specific Options

Table A-13 x86-Specific Options

Option	Action
`-flteval`	Controls floating point evaluation.
`-fprecision`	Initializes the rounding-precision mode bits in the Floating-point Control Word
`-fstore`	Causes the compiler to convert the value of a floating-point expression or function to the type on the left-hand side of an assignment
`-nofstore`	Does not convert the value of a floating-point expression or function to the type on the left-hand side of an assignment
`-xmodel`	Modifies the form of 64-bit objects for the Oracle Solaris x86 platforms

A.1.14 Obsolete Options

The following table lists the options that have been deprecated. Note that the compiler might still accept these options, but might not do so in future releases. Begin using the suggested alternative option as soon as possible.

Table A-14 Obsolete Options Table

Option	Action
`-dalign`	Use `-xmemalign=8s` instead.
`-KPIC` (SPARC)	Use `-xcode=pic32` instead.
`-Kpic` (SPARC)	Use `-xcode=pic13` instead.
`-misalign`	Use `-xmemalign=1i` instead.
`-misalign2`	Use `-xmemalign=2i` instead.
`-x386`	Use `-xchip=generic` instead.
`-x486`	Use `-xchip=generic` instead.
`-xa`	Use `-xprofile=tcov` instead.
`-xarch=v7,v8,v8a`	Obsolete.
`-xcg`	Use `-O` instead to take advantage of the default values for `-xarch`, `-xchip`, and `-xcache`.
`--xcrossfile`	Obsolete. Use `-xipo` instead.
`-xlicinfo`	Obsolete; there is no alternative option.
`-xnativeconnect`	Obsolete, there is no alternative option.
`-xprefetch=yes`	Use `-xprefetch=auto,explicit` instead.
`-xprefetch=no`	Use `-xprefetch=no%auto,no%explicit` instead.
`-xsb`	Obsolete, there is no alternative option.
`-xsbfast`	Obsolete, there is no alternative option.
`-xtarget=386`	Use `-xtarget=generic` instead.
`-xtarget=486`	Use `-xtarget=generic` instead.
`-xvector=yes`	Use `-xvector=lib` instead.
`-xvector=no`	Use `-xvector=none` instead.

Skip Navigation Links
Exit Print View
	Oracle Solaris Studio 12.3: C User's Guide Oracle Solaris Studio 12.3 Information Library