Setting Up Fees and Tuition Groups

You charge fees to students for everything from application to graduation. You define each of those fees and establish rules for how they will be applied and to whom. Tuition groups enable you to assess fees to large groups of students who share attributes.

This chapter discusses how to:

• Set up fee classes.

• Define minimum and maximum fees.

• Set up application fees.

• Set up deposit fees and deposit due dates.

• Set up term fee codes.

• Set up course fees and class fees.

• Define optional fees.

• Set up transaction fees.

• Set up course list fees.

• Set up tuition groups.

Setting Up Fee Classes

To set up fee classes, use the Fee Classes component (FEE_CLASS).

You use fee classes for reporting purposes and grouping fees. For example, you might have a variety of item types that you want to organize under the fee class of Mandatory Tuition and Fees. That way, you can produce a report that shows all mandatory fee item types. Fee class codes are required for term fee setup.

Page Used to Set Up Fee Classes

Defining Minimum and Maximum Fees

To set up minimum and maximum fees, use the Minimum / Maximum Fees component (MIN_MAX_FEE_PANEL).

This section provides an overview of minimum and maximum fees and discusses how to:

• Define minimum and maximum fees for billing careers and academic years.

• Define minimum and maximum fees for terms and sessions.

• Define minimum and maximum fees for admit terms.

Understanding Minimum and Maximum Fees

You can define a minimum and maximum range for all of your fees and charges. You can set fee ranges for sessions, terms, academic years, and billing careers so that they build off one another. Be sure to define enough minimum/maximum fee codes to meet all your needs. For example, a minimum/maximum fee code for application fees might require a career limit of 100 USD while a code for term fees might require a career limit of 60,000 USD.

Pages Used to Define Minimum and Maximum Fees

Defining Minimum and Maximum Fees for Billing Careers and Academic Years

Access the Minimum/Maximum Fees 1 page (Set Up SACR, Product Related, Student Financials, Tuition and Fees, Minimum / Maximum Fees, Minimum/Maximum Fees 1).

Billing Career Minimum/Maximum

The system, by default, sets the student's billing career to the academic career in the student's career term record. The tuition calculation process uses the student's billing career to calculate the student's tuition.

If the student is active in more than one academic career in the same term, you might want to consolidate tuition calculation and billing under a single academic career. If so, then point the billing career for all of the student's career term records to the same academic career. For example, a student might be enrolled in a term as both a graduate student and an undergraduate student. If you wanted to consolidate tuition calculation to just the undergraduate career, you would select undergraduate as the billing career for both the student's undergraduate term record and graduate term record.

If you decide to use a single billing career for all of a student's academic careers within a term, note that to perform a term or session withdrawal, the student must be enrolled in at least one class within the academic career that you select as the student's billing career. Otherwise, the term withdrawal and session withdrawal processes halt processing and instruct you to change the student's billing career to an academic career in which the student has enrollments for the term.

Academic Year Minimum/Maximum

Enter an academic year and specify its minimum and maximum fees.

See Also

Defining Tuition Residency Minimums and Maximums

Defining Minimum and Maximum Fees for Terms and Sessions

Access the Minimum/Maximum Fees 2 page (Set Up SACR, Product Related, Student Financials, Tuition and Fees, Minimum / Maximum Fees, Minimum/Maximum Fees 2).

Term Minimum/Maximum

Enter an academic term and its minimum and maximum fees.

Session Minimum/Maximum

Enter an academic session and its minimum and maximum fees.

Defining Minimum and Maximum Fees for Admit Terms

Access the Minimum/Maximum Fees 3 page (Set Up SACR, Product Related, Student Financials, Tuition and Fees, Minimum / Maximum Fees, Minimum/Maximum Fees 3).

Enter an admit term and its maximum amount.

Setting Up Application Fees

To set up application fees, use the Application Fees component (APPLICATION_FEES).

This section provides an overview of application fees and discusses how to:

• Define application fees.

• Define application fee item types.

• Define application sub fees.

Understanding Application Fees

You must define the rules that your institution uses to assess application fees. Each application fee code that you define represents one or more individual fee charges (sub fees).

A one-to-one relationship exists between an application fee and an application center. You can define only one application fee for an application center. However, an application fee can have multiple sub fees. For example, you could charge different sub fees based on a student's admit type. Then, each admit type (for example, new students, transfer students, or readmitted students) would have its own application sub fee.

Each application fee code requires the definition of one or more sub fees that make up the charge. You can set up sub fees so that they are cumulative or mutually exclusive. You can also define a combination of cumulative and mutually exclusive fees. For example, you can define an application fee code with two sub fees: one sub fee charges students a fee of 50 USD to apply over the web and another sub fee charges students a fee of 75 USD to apply through the mail. While students can apply using both methods, it is unlikely that they would do so.

See Also

Setting Up Application Processing Centers

Pages Used to Set Up Application Fees

Defining Application Fees

Access the Application Fees page (Set Up SACR, Product Related, Student Financials, Admission Fees, Application Fees).

Fee Class	Select a fee class. Fee Class is a descriptive field that is used for reporting purposes only.
Copy Application Fee	Click to copy an application fee and its sub fees from one term to the next.
Effective Term	Select a term for the application fee. You must define an application fee for each term.
Maximum Amount	Enter the maximum fee amount, including all sub fees, for a single application.
Minimum/Maximum Fee Code	Select an optional minimum/maximum fee code. Maximum fee code does not apply to AAWS application fee calculation.
Post to SF from App (post to Student Financials from application)	Select to post the application fee to Student Financials as it is created. Do not post the application fee to the student's account when the payment is recorded. When you select this option, the Application Fee Item Types link appears. Click it to open the Application Fee Item Types page. The first time that you select the check box, the page opens automatically. If you select only this check box and do not select the Post to GL from AAWS App check box, the application fee item types that you set up cannot be used for AAWS fee processing.
Post to GL from AAWS App (post to General Ledger from Admissions Application Web Services application)	Although application fees and payments are not posted to the student account for AAWS, but instead are sent directly to the general ledger, you must set up item types on the Application Fee component. These item types are used by Student Financials to derive the GL ChartFields. When you select this check box, the Application Fee Item Types link appears. Click the link to access the Application Fee Item Types page where you define the item types associated with the AAWS fees and payment. The Waiver Item Type is not valid for AAWS. If you select only this check box and do not select the Post to SF from App check box, the application fee item types that you set up can be used only for AAWS fee processing. To ensure that both AAWS and non-AAWS application fee payments are sent correctly to the general ledger, select both the Post to GL from AAWS App check box and the Post to SF from App check box.
Update App from SF (update application from Student Financials)	Select this option to automatically update the student's application status from Student Financials. When you select this option, the Update Application Fee Status from and to fields appear. This field does not apply to AAWS application fee processing.
Update Application Fee Status from and to	Select the status that you want the system to change from and to. The options for both fields are Pending, Received, and Waived. Note. If the student's original status is different than the option you select, the system does not change it. Consult with your admissions staff to determine the correct settings. This field does not apply to AAWS application fee processing—for information about how the application fee status is updated for AAWS, refer to the Recruiting and Admissions PeopleBook.

See Generating Direct to GL Entries.

See Setting Up Application Processing Centers.

See Entering Application Data.

See Managing PeopleSoft Admission Transactions chapter. At the time of publication of this PeopleBook (March 2012), the latest version of this chapter is available on My Oracle Support as part of the Bundle 23 Recruiting and Admissions doc package (CS_Bundle_23_Recruiting_and_Admissions _9_0.pdf)-Doc ID 1371376.1.

See Using Admission Applications Web Services chapter. At the time of publication of this PeopleBook (March 2012), the latest version of this chapter is available on My Oracle Support as part of the Bundle 23 Recruiting and Admissions doc package (CS_Bundle_23_Recruiting_and_Admissions _9_0.pdf)-Doc ID 1371376.1.

See Also

Defining Minimum and Maximum Fees

Defining Application Fee Item Types

Access the Application Fee Item Types page (click the Application Fee Item Types link on the Application Fees page).

This page has a dual purpose:

• To identify item types used for posting to the student account. Use the page for this purpose if application fees are not calculated in AAWS.

• To identify item types used for posting direct to the general ledger. Use the page for this purpose for AAWS application fees only.

Note. The fields outside of the Tender Category group box—which are required for posting to a student's account—do not apply to AAWS application fee processing.

Defining Application Sub Fees

Access the Application Sub Fees page (Set Up SACR, Product Related, Student Financials, Admission Fees, Application Fees, Application Sub Fees).

Sub Fee Code	Enter a code for the sub fee.
Calculation Option	Select a calculation option. Values are: All Matching Rows: Select to sum multiple sub fees that match the student's characteristics. For example, if you defined a sub fee of 60 USD for undergraduate students that submitted applications using the web and a sub fee of 40 USD for international undergraduate student applications, the system would charge 100 USD to students who meet both of these conditions. Most Descriptive Row: Select to charge students the sub fee that most closely matches the application that they submitted. For example, if you charge a sub fee of 55 USD for undergraduate applications that were submitted by a service, and a 60 USD sub fee for undergraduate applications that were submitted using the internet, an undergraduate student that submitted an application using the internet would be charged 60 USD. The most descriptive row option works best for sub fees, such as the one in this example, that are mutually exclusive, as in this example. The system charges the first application sub fee that it recognizes. No way is available to prioritize which fee is charged.
Maximum Amount	Enter the maximum amount for this sub fee. Note. The maximum amount of the sub fee cannot exceed the maximum amount of the application fee. Maximum Amount does not apply to the AAWS application fee calculation.

Sub Fees

Use the check boxes on this page to select the criteria for the system to use when calculating the sub fee. When you select a check box, a corresponding field becomes available in the lower part of the page. Use this field to select a specific value for the calculation criterion. The fewer criteria that you select, the more broadly the system applies the fee.

Setting Up Deposit Fees and Deposit Due Dates

To set up deposit fees and deposit due dates, use the Deposit Fees component (DEPOSIT_FEES).

Some institutions require a deposit fee from accepted applicants to reserve space in an academic program.

This section discusses how to:

• Define deposit fees.

• Define deposit fee due dates.

• Define status changes resulting from deposits.

Pages Used to Set Up Deposit Fees and Deposit Due Dates

Defining Deposit Fees

Access the Deposit Fees page (Set Up SACR, Product Related, Student Financials, Admission Fees, Deposit Fees, Deposit Due Dates).

Delete Deposit Fee	Click to delete the deposit fee code.
Copy Deposit Fee	Click to copy the deposit fee to a new term.
Multiple Deposits	Specify how to calculate deposits for students who are enrolled in more than one program. All Programs Deposit: Select to charge students a deposit fee for each program into which they are admitted. First Program In: Select to calculate a deposit fee for the First Program perapplication number. If one application exists, and the student is admitted to multiple programs on that application, one deposit is calculated (as long as the admit rows are processed sequentially) for the first program to which the student is admitted. If more than one application exists, and the student is admitted to multiple programs on those applications, then a deposit is calculated for the first program admitted on each application.
Admit Term	Enter the admit term to which the deposit fee applies.

Specifying Deposit Fees by Institution, Career, and Program

Select the institution, academic career, and academic program to which the deposit fee applies along with the deposit amount.

Defining Deposit Fee Due Dates

Access the Deposit Due Dates page (Set Up SACR, Product Related, Student Financials, Admission Fees, Deposit Fees, Deposit Due Dates).

Pivot Date	Select either Admit Date or Application Date as the pivot date that determines the starting point for calculating the deposit fee due date.
From Date and To Date	Enter the range of admission dates to which the deposit fee due date applies.
Use	Select either Due Days or Due Date for calculating the due date. The corresponding field becomes available.
Due Days	Enter the number of days after the pivot date that a deposit fee is due.
Due Date	Enter the specific deposit fee due date.
Due % (due percentage)	Enter the percentage of the deposit that is due. You must define enough rows to total 100 percent.
Update Application from SF (update application from Student Financials)	Select to automatically update the student's academic program status when you post the deposit fee.
Status Update	If you select the Update Application from SF option, you must specify how students' program statuses are updated. Click this link to access the Status Update page.

Defining Status Changes Resulting from Deposits

Access the Status Update page (click the Status Update link on the Deposit Due Dates page).

Previous Status

Enter the academic program status of the students prior to posting a deposit fee.

New

Setting Up Term Fee Codes

To set up term fee codes, use the Term Fees component (TERM_FEE_PANEL) and the Copy Term Fees component (RUN_SFCPTMFE).

This section provides an overview of term fee codes and discusses how to:

• Define term fee codes.

• Define term and session fees.

• Define term sub fee codes.

• Define term sub fees.

• Define tuition residency minimums and maximums.

• Copy term fees to subsequent terms.

Understanding Term Fee Codes

Term fee codes are the most generalized method of establishing rates for tuition and fees. Each term fee code comprises one or more term fee definitions. Each term fee definition comprises one or more term sub fee codes. And each term sub fee code comprises one or more term sub fees. This multilevel structure provides flexibility and convenience.

By using different fee triggers and calculation methods at the lower levels, one term fee code can control how tuition is calculated for a wide range of unique student situations. Another term fee code can do the same for room and board combinations. Take the time to learn how term fee codes work and how you can use them to solve your most complex tuition calculation needs.

Term Sub Fee Codes

You can define one or more sub fee codes for a given term fee. Sub fee codes provide flexibility in how you show charges on an account, how you calculate charges, and how you print charges on a bill. For example, if your institution prefers to show just the bottom line charge for tuition and fees rather than the detail of these fees, you can use sub fees to define all the fees that compose a tuition and fees charge, and one charge appears on an account. If your institution prefers to show the detail of each charge that composes tuition and fees, you can create individual term fees for each of these charges and break down tuition and fees into detail on an account.

Term Fee Copying

After you define your term fees for one term, you can copy those same fees forward to subsequent terms. This enables you to set term fees at the start of each term; you do not have to redefine your term fee schedule with each new term, which reduces data entry time.

Pages Used to Set Up Term Fee Codes

Defining Term Fee Codes

Access the Term Fee Codes page (Set Up SACR, Product Related, Student Financials, Tuition and Fees, Term Fees, Term Fee Codes).

Delete Term Fee	Click to delete the term fee. Note. You cannot delete a term fee that is in use by an active tuition group.
Charge By	Specify how the fee code calculates fees. Values are: Class: Select to reflect charges for the particular term fee that is relative to each class in the student's account information. The system automatically makes available the information that is necessary to use course lists with third-party contracts. Session: Select to sum charges for all classes that are taken within a particular session in the student's account information. If you select this option and want to use course lists with third-party contracts, you must also enable Track Class Pricing (on the Term Fees page). Term: Select to sum charges for all classes that are taken with a particular term in the student's account information. If you select this option and want to use course lists with third-party contracts, you must also enable Track Class Pricing (on the Term Fees page).
Use	Select the basis for calculating the fee. Values are: Anti Units (anticipated units): Select to calculate fees based on the number of units in which students typically enroll within a certain academic program. For example, if Fine Arts freshmen are expected to enroll in 15 units, the system calculates the fee on that basis for all freshmen. Bill Units: Select to charge fees based on the actual number of units in which the student is enrolled versus anticipated units.
Use Anticipated Units if enrollment exists	Select to calculate fees based on anticipated units even if actual enrollment information is available. If you do not select this check box and you are calculating fees using anticipated units, the system uses actual enrollment information when it is available.
Fee Class	Select a fee class to use for reporting purposes.

See Also

Setting Up Course List Fees

Administering Third-Party Contracts

Defining Term and Session Fees

Access the Term Fees page (Set Up SACR, Product Related, Student Financials, Tuition and Fees, Term Fees).

Copy Term Fee	Click to copy the term fee to a new term.
Term	Select the term to which the term fee applies.
Session	If you defined the term fee code to charge by session on the Term Fee Codes page, select the session to which the term fee applies.
Account Type and Item Type	Select an account type and item type for the term fee.
Anticipated Item Type	If the system calculates the term fee code using anticipated units, this field is required. Select a different item type from the one you selected in the Item Type field to distinguish between charges that are based on anticipated enrollment and charges that are based on actual enrollment. Note. If you set up multiple terms, ensure that you specify an anticipated item type for each term.
Fee Trigger	To select an optional fee trigger that limits the application of the term fee to specific students, click either the Use Criteria option or the Use Equation option, and then select the predefined criteria or equation from the lookup. See Working with Equation Engine.
Adjustment Code	Enter the adjustment code (calendar) that governs this fee. This code determines the refund amount for students who drop classes. Note. This adjustment code is used only for class drops. The adjustment code for withdrawal is attached to the tuition group.
Due Date Code	Select a due date code (calendar) to define when the fee is due and payable.
Minimum/Maximum Fee Code	Enter an optional minimum/maximum fee code to assign predefined limits to the term fee.
Minimum Amount	Enter a minimum charge amount that is unique to this term fee.
Maximum Amount	Enter a maximum charge amount that is unique to this term fee.
Anticipated Stop Date	This field becomes available when the system calculates fees using anticipated units. Enter a date after which the system no longer uses anticipated units. At this point, the system calculates the term fee using actual enrollment (billing) units. If the student has not enrolled in classes by the date specified, the system calculates fees using zero units. If so defined, minimum charges could still apply.
Charge for Wait Listed Class	Select to charge the term fee for students who are on a waiting list for a class.
Track Class Pricing	Select to track revenue on a class-specific basis, thereby allocating revenue to specific departments. For example, a student pays a term fee of 2,000.00 USD and is enrolled in four classes of equal units: Physics 150, Calculus 31, Art 111, and Philosophy 101. Breaking down the fee by class yields revenue of 500.00 USD per class. Using revenue tracking by class, you can allocate the revenue from Physics 150 to the Physics Department, the revenue from Calculus 31 to the Math Department, the revenue from Art 111 to the Art Department, and the revenue from Philosophy 101 to the College of Liberal Arts. Note. To accurately track revenue by class, you must set up your item types and classes appropriately in addition to selecting this check box. See Managing the Schedule of Classes.
Exclude Classes w/HECS Status (exclude classes with Higher Education Contribution Scheme status) (AUS)	Select this option so that students are not charged twice for the same class if they are under multiple loan programs.

See Also

Establishing Criteria for Tuition Groups and Fee Triggers

Defining Minimum and Maximum Fees

Defining Term Sub Fee Codes

Access the Term Sub Fee Codes page (Set Up SACR, Product Related, Student Financials, Tuition and Fees, Term Fees, Term Sub Fee Codes).

Track Sub Fees	Select to break down charges by the individual sub fees within the sub fee code . When the check box is cleared, the system sums all sub fee charges.
Sub Fee Code	Enter the sub fee code that you are defining.

Calculation Option 1 and Calculation Option 2

To charge students the maximum fees, set the Calculation Option 1 field to All Matching Rows and the Calculation Option 2 field to Against All Enrollment Units. To charge students the minimum fees, set the Calculation Option 1 field to Most Descriptive Row and the Calculation Option 2 field to Against Meet Criteria Units.

Warning! Values for these fields are delivered with your system as translate values. Do not modify these values in any way. Any modifications to these values will require a substantial programming effort.

Matching Criteria

If you select Most Descriptive Row for Calc Option 1, or Against Meet Criteria Units in Calc Option 2, or both, you must define the specific criteria that the courses must match. The following check boxes enable you to control the application of term sub fees by specifying class characteristics. For example, you might have a class for which you charge 350.00 USD per unit if it is taught in a classroom by a professor, and 275.00 USD per unit if the class is an independent study using videotaped lectures. By selecting the Instruction Mode Specific check box, you can define two term sub fees under a single sub fee code. For students taking the class with a professor, the system charges 350.00 USD per unit. For students taking the class as an independent study, the system charges 275.00 USD.

Defining Term Sub Fees

Access the Term Sub Fees page (Set Up SACR, Product Related, Student Financials, Tuition and Fees, Term Fees, Term Sub Fees).

Audit Rate Specified and Audit Calculated Separately

Two options determine how the system assesses charges for audited classes: Audit Rate Specified and Audit Calculated Separately.

Term Sub Fee Calculation Specifications

Use the following fields to more narrowly target the application of the fee. The fewer fields that you define, the more broadly the system applies the fee. These fields are available only if the corresponding options are selected on the Term Sub Fee Codes page.

Fee Specifications

Using the following fields, you can control exactly how much to charge for the term sub fee. Fees can be based on academic units, a flat fee, a per-unit surcharge, a flat fee surcharge, or a combination of all four. The amounts that you enter are not independent of each other. Rather, they are summed. For example, if you establish an amount per unit of 250 USD and a flat amount of 300 USD, the system charges a student taking 15 units 4,050 USD (3,750 + 300 USD). If you specify an audit rate, the system also adds fees for audited to the total.

Setting Up a Multitiered Tuition Term Sub Fee

Setting up a multitiered tuition fee schedule is easy using additional term sub fee definitions. In the following example, three term sub fees are defined to charge tuition for three different ranges of academic units:

• Students who take up to 12 units are charged a flat amount of 1,200 USD, plus 250 USD per unit (12 units = 4,200 USD).

• Students who take up to 15 units are charged a flat amount of 1,200 USD, plus 250 USD for the first 12 units, plus 225 USD per unit for the additional units (15 units = 4,875 USD).

• Students who take over 15 units are charged a flat amount of 1,200 USD plus 250 USD per unit for the first 12 units, plus 225 USD per unit for the next 3 units, plus 200 USD for each unit over 15.

Defining Tuition Residency Minimums and Maximums

Access the Term Fee Residency page (Set Up SACR, Product Related, Student Financials, Tuition and Fees, Term Fees, Term Fee Residency).

Minimum Amount and Maximum Amount

Enter the minimum and maximum amounts that a student pays to reach each level of tuition residency.

Tuition Residency

If your institution has programs in which students do not have to pay for more than a specified number of terms at full-time equivalency rates, you can use tuition residency to automatically cap the fees. For example, you might offer a professional education program that can be completed with seven terms of full-time work. To attract students, you advertise a seven-term course of study for a specified amount of money. Enrolling students are placed in cohort groups, attend a structured series of classes, and pay a flat amount per term. Over the course of seven terms, some students inevitably will have scheduling conflicts with one or more classes and they will have to take them out of sequence. To accommodate these students, you allow them to take the classes the next time that they are offered at no additional charge. By using tuition residency functionality, you can automatically ensure that the students pay the full tuition and that the system does not accidentally charge them for the delayed classes.

See Also

Defining Minimum and Maximum Fees

Setting Up Tuition Groups

Copying Term Fees to Subsequent Terms

Access the Copy Term Fees page (Set Up SACR, Product Related, Student Financials, Tuition and Fees, Copy Term Fees).

Copy Options	Select the copy options that you want to use: Warning! Values for this field are delivered with your system as translate values. Do not modify these values in any way. Any modifications to these values will require a substantial programming effort. Copy All Term Fees: Copies all the term fees in the source term to the target term. Copy One Term Fee: Enables you to copy a specific fee from one term to another or to rename a term fee definition within the same term. When you select this option, the From Fee Code and To Fee Code fields become available for use.
SetID	Select the setID to which the term fees are linked.
From Fee Code	Select the source fee code from the required From Fee Code field.
To Fee Code	Enter the name of the fee code in the To Fee Code field. To copy the fee code to a new term, you can use the same name. To rename the fee code definition, enter the new name.
From Term and To Term	Select the source term in the From Term field. Select the target term in the To Term field.
From Session and To Session	Use the From Session field to identify any session that is held in the source term whose fee schedule you are copying. Use the To Session field to identify any session target term for which you want to use the copied fee schedule. Warning! Values for these fields are delivered with your system as translate values. Do not modify these values in any way. Any modifications to these values will require a substantial programming effort.

Setting Up Course Fees and Class Fees

To set up course fees and class fees, use the Rate Tables for Course Fees component (CRSE_RATE_PANEL), the Course Fees component (CRSE_FEE_PANEL), the Course Fees Modal component (CRSE_FEE_MODAL), the Class Fees component (CLASS_FEE_PANEL), and the Class / Course Fees Rollover component (RUNCTL_FEE_RLVR).

This section provides an overview of course and class fees, and discusses how to:

• Set up rate tables for course fees.

• Define course fees.

• Define course sub fees.

• Define modal course fees.

• Define modal course sub fees.

• Define class fees.

• Define class sub fees.

• Define modal class fees.

• Define modal class sub fees.

• Roll over course and class fees to future terms.

Understanding Course Fees and Class Fees

After term fees, course fees and class fees are the most generalized method of establishing rates for fees.

Rate Tables for Course Fees

Use course rate IDs to add student characteristics to a course fee. Using a course rate ID with a course fee enables you to charge students with different characteristics at different rates. For example, you could charge an undergraduate chemistry student one fee for a lab, and an undergraduate humanities student a different fee for the same lab.

Note. Course rate IDs are not a replacement for course fees. Rather, they work in conjunction with a course fee definition.

Course Fees

Course fees provide additional flexibility in assessing fees. For example, you can define extra fees for courses with labs or studio sections. You could also override the term fees calculation rules for a particular course and charge a different fee altogether.

Note. If only one instance of the course exists, the course fee acts as the class fee. However, if a difference exists between a course fee and a class fee, the class fee overrides the course fee.

Class Fees

A class is a particular instance of a course. Courses are identified at the catalog level, and classes are identified through the class schedule. If the course fee is different from the fee charged for a class offered in that course, the class fee overrides the course fee.

Modal Course Fees and Class Fees

The Course Fees Modal component enables student records personnel to define course fees when accessing the Course Catalog component within PeopleSoft Student Records.

The Class Fees Modal component enables student records personnel to define class fees when accessing the Schedule New Course or Schedule of Classes components within PeopleSoft Student Records.

See Also

Creating Course Offerings

Managing the Schedule of Classes

Pages Used to Set Up Course Fees and Class Fees

Setting Up Rate Tables for Course Fees

Access the Rate Tables for Course Fees page (Set Up SACR, Product Related, Student Financials, Course and Class Fees, Rate Tables for Course Fees).

Career Specific	Select to match classes by academic career.
Group Specific	Select this option to match classes by academic group.
Program Specific	Select to match classes by academic program.
Plan Specific	Select to match classes by academic plan.
(AUS) Cohort Year Specific	Select to match classes by cohort year.
Audit Rate Specified	Select to define a unique rate for audited courses. If this check box is cleared, students auditing the course are charged the regular rate.
Institution	Enter the academic institution.

Student Characteristics

The following fields describe characteristics of the student, not the course. By inserting additional rows with different combinations of characteristics, you can charge a different rate for the same course. These fields are all optional. To have the fee apply to all students within an institution, leave all of the student characteristics fields blank.

Fee Calculation Parameters

Using the following fields, you can control how much the system charges for the course fee. Fees can be charged based on academic units, a flat fee, or a combination of the two. Amounts that you enter are not independent of each other. Rather, they are summed.

See Also

Working with Equation Engine

Defining Course Fees

Access the Course Fees page (Set Up SACR, Product Related, Student Financials, Course and Class Fees, Course Fees, Course Sub Fees).

Component	If more than one component of the course exists, select the component for which you want to define the fee. Otherwise, leave this field blank.
Institution	Enter the institution to which the course belongs. If the fee is assessed regardless of the institution, leave this field blank.
Campus	Enter the campus to which the course belongs. If the fee is assessed regardless of the campus, leave this field blank.
Location	Enter the location to which the course belongs. If the fee is assessed regardless of the location, you can leave this field blank.
Copy Course Fee	Select this option to copy a definition from one term to another.

Term/Session

Defining Course Sub Fees

Access the Course Sub Fees page (Set Up SACR, Product Related, Student Financials, Course and Class Fees, Course Sub Fees).

Audit Rate Specified	Select to define a unique rate for audited courses. If you clear this check box, students that audit the course are charged the regular rate.
Account Type	Select the account type to which you want to post the course fee.
Item Type	Select the item type to which you want the course fee posted.
Fee Trigger	To apply the course fee to certain students only, select either the Use Criteria option or the Use Equation option, and then select the predefined criteria or equation from the lookup. If you leave this field blank, all students who take the course are charged the fee. See Working with Equation Engine.
Course Rate ID	Enter an optional course rate ID to control the application of the course fee using student characteristics. If you enter a course rate ID, the Equation, Amount/Unit, and Flat Amount fields become unavailable.

Fee Calculation Parameters

Using the following fields, you can control how much the system charges for the course fee. Fees can be charged based on academic units, a flat fee, or a combination of the two. Amounts that you enter are not independent of each other. Rather, they are summed.

See Also

Establishing Criteria for Tuition Groups and Fee Triggers

Working with Equation Engine

Setting Up Adjustment Calendars

Creating Billing and Due Date Calendars

Defining Waivers and Waiver Groups

Defining Modal Course Fees

Access the Course Fee Modal page (Set Up SACR, Product Related, Student Financials, Course and Class Fees, Course Fees Modal).

This page is identical to the Course Fees page.

See Also

Defining Course Fees

Defining Modal Course Sub Fees

Access the Course Sub Fees Modal page (Set Up SACR, Product Related, Student Financials, Course and Class Fees, Course Sub Fees Modal).

This page is identical to the Course Sub Fees page.

See Also

Defining Course Sub Fees

Defining Class Fees

Access the Class Fees page (Set Up SACR, Product Related, Student Financials, Course and Class Fees, Class Fees).

Offer Number	Enter the offer number of the class.
Term	Enter the term for which the class is offered.
Session	If the class is offered in more than one session in the term, enter the session number.
Section	If the class is offered in more than one section, enter a section number.
Component	If more than one component is offered for the class, and the class charge should apply to a specific component, select the component.
Charge Method	Define the charge method. Values are: Always: The fee is charged in addition to term fees. For example, the lab fee would be charged in addition to the class term fee (tuition). Not included in term tuition: The class is excluded from the term fee calculation and the class fee becomes the total charge for the class.
Charge for Wait Listed Class	Select this option if the class fee is to be charged to a wait listed student.
Charge for Course Fee	Select this option if you want to charge course fees in addition to class fees. If you do not select this check box, class fee definitions override course fee definitions for the same class.
Include in Pro-rata	Select this option if this class fee is included in pro rata refund calculations.
Include in other Withdrawal	Select this option to include this fee in other withdrawal calculations. This selection is optional.

Defining Class Sub Fees

Access the Class Sub Fees page (Set Up SACR, Product Related, Student Financials, Course and Class Fees, Class Sub Fees).

Audit Rate Specified	Select to define a unique rate for audited classes. If the check box is cleared, students auditing the class are charged the regular rate.
Account Type	Select the account type to which you want the class fee posted.
Item Type	Select the item type to which you want the class fee posted.
Fee Trigger	To apply the class fee to specific students, select either the Use Criteria option or the Use Equation option, and then select the predefined criteria or equation from the lookup. If you leave the field blank, the system charges the fee to all students who take the class. See Working with Equation Engine.
Course Rate ID	Enter an optional course rate ID to control the application of the class fee using student characteristics. If you enter a course rate ID, the Equation, Amount/Unit, and Flat Amount fields become unavailable.

Fee Calculation Parameters

Using the following fields, you can control exactly how much the system charges for the class fee. Fees can be charged based on academic units, a flat fee, or a combination of the two. Amounts that you enter are not independent of each other. Rather, they are summed.

See Also

Establishing Criteria for Tuition Groups and Fee Triggers

Working with Equation Engine

Setting Up Adjustment Calendars

Creating Billing and Due Date Calendars

Defining Waivers and Waiver Groups

Defining Modal Class Fees

Access the Class Fees Modal page (Set Up SACR, Product Related, Student Financials, Course and Class Fees, Class Fees Modal).

This page is identical to the Class Fees page.

See Also

Defining Class Fees

Defining Modal Class Sub Fees

Access the Class Sub Fees Modal page (Set Up SACR, Product Related, Student Financials, Course and Class Fees, Class Sub Fees Modal).

This page is identical to the Class Sub Fees page.

See Also

Defining Class Sub Fees

Rolling Over Course and Class Fees to Future Terms

Access the Class / Course Fees Rollover page (Set Up SACR, Product Related, Student Financials, Course and Class Fees, Class / Course Fees Rollover).

From Term and To Term	Enter the term from which you are copying fee information and the term to which you are copying it.
Override Existing Setup	If the term that you specify in the To Term field has existing fee information, the process does not overwrite it unless you select this check box. If you select this check box, the process replaces the existing fee information with the fee information from the term specified in the From Term field.
Class Fees, Course Fees, and Course List Fees	Select the types of fee information that you want to roll over.

Note. Reversing this process is not possible after you run it.

Defining Optional Fees

To set up optional fees, use the Optional Fees component (OPT_FEE_TABLE).

Your institution may have several fees that apply to many, but not all, students. For example, many students might need to purchase a parking sticker. By setting up a parking sticker fee as an optional fee, students can choose to purchase a parking sticker at the time of registration.

Institutions can use Self Service Miscellaneous Purchases to allow students to select in self service.

For setup information:

See Setting Up Miscellaneous Fees.

This section discusses how to:

• Define optional fee codes.

• Define optional fee values.

• Link optional fees to terms.

• Define optional fee amounts.

Pages Used to Define Optional Fees

Defining Optional Fee Codes

Access the Optional Fees page (Set Up SACR, Product Related, Student Financials, Optional Fees, Optional Fees).

Add all Careers	Click to apply the optional fee to all active academic careers in the institution. If you add all careers, the Academic Career field becomes unavailable.
Academic Career	Enter the specific careers to which the system applies the optional fee.

Defining Optional Fee Values

Access the Values page (Set Up SACR, Product Related, Student Financials, Optional Fees, Optional Fees, Values).

Valid Value	Define the valid value for the optional fee. This is the value that is attached to an optional fee per term definition.
Description	Provide a description for the optional fee.
Short Desc (short description)	Provide a short description for the optional fee.
Initial Value	Select to make a valid value the default value. Select the Init Value (initial value) check box as the default fee to be charged. In this example, the default value NOPARK means that the system does not charge an optional parking sticker fee to a student unless PRKING is manually selected during tuition calculation.

Linking Optional Fees to Terms

Access the Optional Fees - Term page (Set Up SACR, Product Related, Student Financials, Optional Fees, Optional Fees - Terms).

Term	Select the term in which the fee is charged.
Account Type	Enter the account type for the fee.
Item Type	Select the item type to which the system posts the optional term fee.
Due Date Code	Select the due date code (billing and due calendar).
Start Date	Enter an optional start date to specify the first day that the optional fee can be selected.
Stop Date	Enter an optional stop date to specify the last day that the optional fee can be selected. The Optional Fees for a Student page functionality cannot be used to calculate or link students to an optional fee after this date. However, if changes are necessary, you can use the Optional Fees Override page.
No Change Date	Enter an optional no change date after which enrollment changes do not affect the amount of optional fees charged.
One Fee for All Careers	Select to charge students one fee regardless of the number of billing careers to which they are associated. If you clear this check box, the system charges students who are associated with more than one billing career once for each career.

Defining Optional Fee Amounts

Access the Optional Fees per Term page (Set Up SACR, Product Related, Student Financials, Optional Fees, Optional Fees per Term).

Academic Load

Select an academic load as a criterion for the optional fee.

Optional Fee Parameters

Setting Up Transaction Fees

To set up transaction fees, use the Transaction Fees component (TRANSACTION_FEES).

Transaction fees are additional fees that are charged to students in the event of an enrollment transaction such as the addition or dropping of a class. You set up transaction fees by term with an effective date for each term.

Page Used to Set Up Transaction Fees

Defining Transaction Fees

Access the Transaction Fees page (Set Up SACR, Product Related, Student Financials, Tuition and Fees, Transaction Fees).

Copy Transaction Fee	Click to copy a transaction fee definition from one term to another. You will likely need to change the effective date when you use this button so that the transaction fee definition becomes active on the appropriate day of the additional term for which you are copying the fee.
Term	Enter the term for which you want the transaction fee to apply.
Session	To apply the transaction fee to more than one session within the term, specify the session.

Transaction Fee Definitions

Setting Up Course List Fees

To set up course list fees, use the Course List Fees component (CLST_FEE_PANEL).

Establish fees for all courses within a given course list.

Page Used to Set Up Course List Fees

Defining Course List Fees

Access the Course List Fees page (Set Up SACR, Product Related, Student Financials, Course and Class Fees, Course List Fees).

Copy Course List Fee	Click to copy a course list fee definition from one term to another.
Term	Enter the term in which the fee is charged.
Session	Select the session in which the fee is charged.
Charge Method	Select the charge method. Values are: Always: The fee is charged in addition to term fees. Not included in term tuition: The course is excluded from the term fee calculation and the course fee becomes the total cost of the class.
Charge for Wait Listed Class	Select to charge the course fee to a wait listed student.
Audit Rate Specified	Select to define a unique rate for audited courses. If you clear this check box, the system charges the regular rate to students auditing the course.
Include in Pro-rata	Select to include the course fee in pro rata refund calculations.
Include in Other Withdrawal	Select to include this fee in other withdrawal calculations. This selection is optional.

Course List Sub Fees

Fee Calculation Parameters

Using the following fields, you can control exactly how much the system charges for the course fee. Fees can be charged based on academic units, a flat fee, or a combination of the two. Amounts that you enter are not independent of each other. Rather, they are summed.

See Also

Establishing Criteria for Tuition Groups and Fee Triggers

Setting Up Adjustment Calendars

Setting Up Course Fees and Class Fees

Working with Equation Engine

Defining Waivers and Waiver Groups

Creating Billing and Due Date Calendars

Setting Up Tuition Groups

To set up tuition groups, use the Tuition Groups component (SEL_GROUP_PANEL).

This section provides an overview of tuition groups and discusses how to:

• Define tuition groups.

• Link adjustment codes to tuition groups.

• Link criteria to tuition groups.

• Link term fee codes to tuition groups.

• Link a waiver code to a single term fee within a tuition group.

• Link course lists to tuition groups.

• Link waiver codes to tuition groups.

• Review established tuition group priorities.

Understanding Tuition Groups

Tuition groups enable you to combine large groups of students who are charged, generally, the same set of fees under the same rules. Within the tuition group definition, you use adjustment codes, term fee, course list, and waiver definitions to fine-tune charges and adjustments (refund rules) so that students receive the correct charges for their unique situations. Because so much flexibility is in the components that compose the tuition group, you can define relatively few tuition groups to control all tuition calculations. Students might be assigned to a tuition group as they are activated for a term or be automatically assigned to the correct group using criteria that you have defined when tuition is calculated. You can also override the system-assigned tuition group on an individual student basis.

Pages Used to Set Up Tuition Groups

Defining Tuition Groups

Access the Tuition Groups - Definition page (Set Up SACR, Product Related, Student Financials, Tuition and Fees, Tuition Groups, Definition).

Priority	If a group of students cannot be categorized into one tuition group, you must define the preferred tuition group with a higher priority. For example, if your institution offers a combined JD/MBA program, students could be assigned to one of three tuition groups (JD, MBA, or JD/MBA). By setting a higher priority (lower number) for the JD/MBA group, you ensure that students are charged appropriately.
Transaction Fee Code	Select an optional transaction fee code.
Tuition Calculation Group	Clear this check box if you do not want to use this tuition group for actual tuition calculation.
Fin Aid Calculation Group (financial aid calculation group)	Select to enable this definition to be used for calculating projected fees for financial aid budgets.
Lock In Flag	Select to lock in a minimum amount of tuition for the group at a specified point in the term.

See Also

Setting Up Transaction Fees

Linking Adjustment Codes to Tuition Groups

Access the Tuition Groups - Adjustment Codes page (Set Up SACR, Product Related, Student Financials, Tuition and Fees, Tuition Groups, Adjustment Codes).

Select adjustment codes to determine the refund schedules for members of a tuition group. Some refund schedules are mandated by a state government or agency, or by the federal government. Your institution can also devise and apply its own refund schedule. Federal regulations require that refunds for students that receive federal financial aid be calculated using the refund table most advantageous to the student.

See Also

Setting Up Adjustment Calendars

Linking Criteria to Tuition Groups

Access the Tuition Groups - Criteria page (Set Up SACR, Product Related, Student Financials, Tuition and Fees, Tuition Groups, Criteria).

Criteria	Select the criteria to select students for inclusion in the tuition group. You must attach at least one criteria code.
Priority	When you use more than one criteria code, connect them with an OR operator and provide a priority rating.

Linking Term Fees to Tuition Groups

Access the Tuition Groups - Term Fees page (Set Up SACR, Product Related, Student Financials, Tuition and Fees, Tuition Groups, Term Fees).

Fee Code	Enter the term fee code that you want to link to this tuition group. You must link at least one term fee code, but you can add as many term fee codes as necessary to cover fees for all members of the tuition group.
Description	The term fee description appears in this field.
Include in Pro-rata Calc (include in pro rata calculation)	Select to include the term fee in a pro rata refund calculation in the event that the student withdraws.
Include in Withdrawal Calc (include in withdrawal calculation)	Select to include the term fee in a withdrawal calculation if that the student withdraws. Select this check box when tuition calculation adjustments for a withdrawal require different calendars and calculations for specific term fees. If you select this check box, the tuition calculation adjustment process for withdrawals uses the applicable adjustment calendar that is designated on the Tuition Groups - Adjustment Codes page. If you clear this check box, the tuition calculation adjustment process for withdrawals uses the adjustment calendar that is defined on the Term Fees - Term Fees page for this specific term fee. Selecting this check box does not override an adjustment reason in PeopleSoft Student Records. Nor does it exempt a fee from the withdrawal adjustment calculation. To use the adjustment calendar that is associated with the term fee when you are adjusting tuition on a withdrawal, be sure to create a row for withdrawal in the setup of the adjustment calendar that you have specified on your term fee. See Defining Term and Session Fees.
Lock In Calc (lock in calculation)	Select to lock in charges for this term fee at a specified point in the term. This option is available only if the Lock in Calc check box has been selected on the Definition page.
Residency Calc (residency calculation)	Select to include the term fee in tuition residency calculation.
Waivers	Click to define waivers that are specific to one term fee.

See Also

Setting Up Term Fee Codes

Linking a Waiver Code to a Single Term Fee Within a Tuition Group

Access the Term Fee Waivers page (click the Waivers link on the Tuition Groups - Term Fees page).

Waiver Code

Select the waiver code to apply to the term fee to waive charges. Waivers that are attached at this level apply only to the specific term fee and not to the tuition group as a whole.

Linking Course Lists to Tuition Groups

Access the Tuition Groups - Course Lists page (Set Up SACR, Product Related, Student Financials, Tuition and Fees, Tuition Groups, Course Lists).

Course List	Enter the course list that you are linking to the tuition group.
Include in Pro-rata Calc (include in pro rata calculation)	Select if you want the course list fees included in any pro-rata calculation.
Include In Withdrawal Calc (include in withdrawal calculation)	Select if you want the course list fees included in any withdrawal calculations for this tuition group.

See Also

Setting Up Course List Fees

Linking Waiver Codes to Tuition Groups

Access the Tuition Groups - Waivers page (Set Up SACR, Product Related, Student Financials, Tuition and Fees, Tuition Groups, Waivers).

Waiver Code

Select the waiver code to link to the tuition group. Waiver codes that are linked at this level apply to all term fees that are attached to the tuition group.

See Also

Defining Waivers and Waiver Groups

Reviewing Established Tuition Group Priorities

Access the Tuition Group Priority page (Set Up SACR, Product Related, Student Financials, Tuition and Fees, Tuition Group Priority).

The Tuition Group Priority page lists all tuition groups that are defined for your institution, provides a description of the tuition groups, and displays their priority. Use this page to confirm that potentially competing tuition group definitions have the correct priority ratings.