Install VMware ESXi 5 (Local or Remote Interactive Installation)

Before You Begin

Complete all of the preparation procedures in Preparing for ESXi 5 Installation.

1. Connect to your server console using one of the methods described in your server's installation guide. See the instructions in one of the following procedures:

   • Set Up the Local Console

   • Set Up the Remote Console

2. Power on or reset the server.

   BIOS messages appear on the console.

3. Insert the distribution media in the local or remote server.

   Additional BIOS messages appear on the console.

4. When you see a message offering a series of selections, press F8.

   Initializing USB Controllers .. Done.
   Press F2 to run Setup (CTRL+E on Remote Keyboard)
   Press F8 for BBS POPUP (CTRL+P on Remote Keyboard)
   Press F12 to boot from the network (CTRL+N on Remote Keyboard)

   After a delay, a menu appears with a list of boot devices.

       Please select boot device:
   --------------------------------
   USB CD/DVD
   PXE:IBA GE Slot 1000 v1331
   PXE:IBA GE Slot 1001 v1331
   PXE:IBA GE Slot 4100 v1331
   PXE:IBA GE Slot 4101 v1331
   PXE:IBA GE Slot 8100 v1331
   PXE:IBA GE Slot 8101 v1331
   PXE:IBA GE Slot C100 v1331
   PXE:IBA GE Slot C101 v1331
   
   --------------------------------

5. Select USB CD/DVD from the boot device list.

   Control passes to the OS installation program on the media.

6. Follow the steps in the VMware vSphere 5 documentation to complete the installation.

   See VMware ESXi 5 and Server Module Documentation.

Next Steps

• Install VMware ESXi 5 Drivers

• Update VMware ESXi 5