cscope [options] files...
cscope is an interactive screen-oriented tool that allows the user to browse through C source files for specified elements of code.
By default, cscope examines the C (.c and .h), lex (.l), and yacc (.y) source files in the current directory. cscope may also be invoked for source files named on the command line. In either case, cscope searches the standard directories for #include files that it does not find in the current directory. cscope uses a symbol cross-reference, cscope.out by default, to locate functions, function calls, macros, variables, and preprocessor symbols in the files.
cscope builds the symbol cross-reference the first time it is used on the source files for the program being browsed. On a subsequent invocation, cscope rebuilds the cross-reference only if a source file has changed or the list of source files is different. When the cross-reference is rebuilt, the data for the unchanged files are copied from the old cross-reference, which makes rebuilding faster than the initial build.
The following options can appear in any combination:
Build the cross-reference only.
Ignore letter case when searching.
Use only ASCII characters in the cross-reference file, that is, do not compress the data.
Do not update the cross-reference.
Suppress the ^e command prompt between files.
Use reffile as the cross-reference file name instead of the default cscope.out.
Look in incdir (before looking in the standard place for header files, normally /usr/include) for any #include files whose names do not begin with / and that are not specified on the command line or in namefile below. (The #include files may be specified with either double quotes or angle brackets.) The incdir directory is searched in addition to the current directory (which is searched first) and the standard list (which is searched last). If more than one occurrence of -I appears, the directories are searched in the order they appear on the command line.
Browse through all source files whose names are listed in namefile (file names separated by spaces, tabs, or new-lines) instead of the default (cscope.files). If this option is specified, cscope ignores any files appearing on the command line.
Do a single search with line-oriented output when used with the -num pattern option.
Line-oriented interface (see ``Line-Oriented Interface'' below).
Go to input field num (counting from 0) and find pattern.
Prepend path to relative file names in a pre-built cross-reference file so you do not have to change to the directory where the cross-reference file was built. This option is only valid with the -d option.
Display the last n file path components instead of the default (1). Use 0 to not display the file name at all.
Look in dir for additional source files. This option is ignored if source files are given on the command line.
Use only the first eight characters to match against C symbols. A regular expression containing special characters other than a period (.) will not match any symbol if its minimum length is greater than eight characters.
Do not check file time stamps (assume that no files have changed).
Unconditionally build the cross-reference file (assume that all files have changed).
Print on the first line of screen the version number of cscope.
The -I, -p, and -T options can also be in the cscope.files file.
After the cross-reference is ready, cscope will display this menu:
Find this C symbol: Find this global definition: Find functions called by this function: Find functions calling this function: Find this text string: Change this text string: Find this egrep pattern: Find this file: Find files #including this file:
Press the TAB key repeatedly to move to the desired input field, type the text to search for, and then press the RETURN key.
If the search is successful, any of these single-character commands can be used:
Edit the file referenced by the given line number.
Display next set of matching lines.
Display next set of matching lines.
Display previous set of matching lines.
Edit displayed files in order.
Append the displayed list of lines to a file.
Pipe all lines to a shell command.
At any time these single-character commands can also be used:
Move to next input field.
Move to next input field.
Move to next input field.
Move to previous input field.
Search with the last text typed.
Move to previous input field and search pattern.
Move to next input field and search pattern.
Toggle ignore/use letter case when searching. (When ignoring letter case, search for FILE will match File and file.)
Rebuild the cross-reference.
Start an interactive shell (type ^d to return to cscope).
Redraw the screen.
Give help information about cscope commands.
Exit cscope.
Note: If the first character of the text to be searched for matches one of the above commands, escape it by typing a \ (backslash) first.
After the text to be changed has been typed, cscope will prompt for the new text, and then it will display the lines containing the old text. Select the lines to be changed with these single-character commands:
Mark or unmark the line to be changed.
Mark or unmark all displayed lines to be changed.
Display next set of lines.
Display next set of lines.
Display previous set of lines.
Mark all lines to be changed.
Change the marked lines and exit.
Exit without changing the marked lines.
Start an interactive shell (type ^d to return to cscope).
Redraw the screen.
Give help information about cscope commands.
If your terminal has arrow keys that work in vi (1) , you can use them to move around the input fields. The up-arrow key is useful to move to the previous input field instead of using the TAB key repeatedly. If you have the CLEAR, NEXT, or PREV keys they will act as the ^l, +, and - commands, respectively.
The -l option lets you use cscope where a screen-oriented interface would not be useful, e.g., from another screen-oriented program. cscope will prompt with >> when it is ready for an input line starting with the field number (counting from 0) immediately followed by the search pattern, e.g., 1main finds the definition of the main function. If you just want a single search, instead of the -l option use the -L and -num pattern options, and you won't get the >> prompt. For -l, cscope outputs the number of reference lines.
cscope: 2 lines
For each reference found, cscope outputs a line consisting of the file name, function name, line number, and line text, separated by spaces, e.g.,
main.c main 161 main(argc, argv)
Note that the editor is not called to display a single reference, unlike the screen-oriented interface.
You can use the r command to rebuild the database. cscope will quit when it detects end-of-file, or when the first character of an input line is ^d or q.
Preferred editor, which defaults to vi(1).
Colon-separated list of directories to search for #include files.
Home directory, which is automatically set at login.
Preferred shell, which defaults to sh(1).
Colon-separated list of directories to search for additional source files.
Terminal type, which must be a screen terminal.
Terminal information directory full path name. If your terminal is not in the standard terminfo directory, see curses(3CURSES) and terminfo(4) for how to make your own terminal description.
Temporary file directory, which defaults to /var/tmp.
Preferred file display program [such as pg], which overrides EDITOR (see above).
A colon-separated list of directories, each of which has the same directory structure below it. If VPATH is set, cscope searches for source files in the directories specified; if it is not set, cscope searches only in the current directory.
Default files containing -I, -p, and -T options and the list of source files (overridden by the -i option).
Symbol cross-reference file, which is put in the home directory if it cannot be created in the current directory.
Temporary file containing new cross-reference before it replaces the old cross-reference.
The C User's Guide.
cscope recognizes function definitions of the form:
fname blank ( args ) white arg_decs white {
where:
is the function name
is zero or more spaces or tabs, not including newlines
is any string that does not contain a " or a newline
is zero or more spaces, tabs, or newlines
are zero or more argument declarations (arg_decs may include comments and white space)
It is not necessary for a function declaration to start at the beginning of a line. The return type may precede the function name; cscope will still recognize the declaration. Function definitions that deviate from this form will not be recognized by cscope.
The Function column of the search output for the menu option Find functions called by this function: input field will only display the first function called in the line, that is, for this function
e() { return (f() + g()); }
the display would be
Functions called by this function: e File Function Line a.c f 3 return(f() + g());
Occasionally, a function definition or call may not be recognized because of braces inside #if statements. Similarly, the use of a variable may be incorrectly recognized as a definition.
A typedef name preceding a preprocessor statement will be incorrectly recognized as a global definition, e.g.,
LDFILE * #if AR16WR
Preprocessor statements can also prevent the recognition of a global definition, e.g.,
char flag #ifdef ALLOCATE_STORAGE = -1 #endif ;
A function declaration inside a function is incorrectly recognized as a function call, e.g.,
f() { void g(); }
is incorrectly recognized as a call to g().
cscope recognizes C++ classes by looking for the class keyword, but doesn't recognize that a struct is also a class, so it doesn't recognize inline member function definitions in a structure. It also doesn't expect the class keyword in a typedef, so it incorrectly recognizes X as a definition in
typedef class X * Y;
It also doesn't recognize operator function definitions
Bool Feature::operator==(const Feature & other) { ... }