ZS3-2 Standalone to DE2-24 Disk Shelves

The following figures show a subset of the supported configurations for Oracle ZFS Storage ZS3-2 standalone controllers with one HBA. To cable the controller to the disk shelves, use the Cabling Guidelines, which include the Maximum Number of Disk Shelves per Controller Configuration.

Note - For hardware port locations, see the PCIe Options section in the Hardware Maintenance Overview for your controller model.

Figure 3-49 ZS3-2 standalone controller with one HBA connected to one DE2-24 disk shelf in a single chain

Figure 3-50 ZS3-2 standalone controller with one HBA connected to two DE2-24 disk shelves in two chains

Figure 3-51 ZS3-2 standalone controller with one HBA connected to six DE2-24 disk shelves in two chains

The following figures show a subset of the supported configurations for Oracle ZFS Storage ZS3-2 standalone controllers with two HBAs. To cable the controller to the disk shelves, use the Cabling Guidelines, which include the Maximum Number of Disk Shelves per Controller Configuration.

Note - For hardware port locations, see the PCIe Options section in the Hardware Maintenance Overview for your controller model.

Figure 3-52 ZS3-2 standalone controller with two HBAs connected to one DE2-24 disk shelf in one chain

Figure 3-53 ZS3-2 standalone controller with two HBAs connected to two DE2-24 disk shelves in two chains

Figure 3-54 ZS3-2 standalone controller with two HBAs connected to three DE2-24 disk shelves in three chains

Figure 3-55 ZS3-2 standalone controller with two HBAs connected to four DE2-24 disk shelves in four chains

Figure 3-56 ZS3-2 standalone controller with two HBAs connected to eight DE2-24 disk shelves in four chains

Figure 3-57 ZS3-2 standalone controller with two HBAs connected to sixteen DE2-24 disk shelves in four chains

Skip Navigation Links
Exit Print View
	Oracle^® ZFS Storage Appliance Cabling Guide For ZS3-x, 7x20 Controllers, and DE2-24, Sun Disk Shelves