对《Sun Server X3-2 Service Manual》的更正

需要对《Sun Server X3-2 Service Manual》进行如下更正：

• TLI 存储在以下组件的 FRUID（field-replaceable unit identifier，现场可更换单元标识符）中：配电板 (power distribution board, PDB)、主板 (motherboard, MB) 和磁盘底板 (disk backplane, DBP)。该叙述是错误的。TLI 实际上存储在电源 0 (PSU 0)、主板 (motherboard, MB) 和磁盘底板 (disk backplane, DBP) 中。

• 默认情况下禁用 BIOS 设置实用程序中 "IO" 菜单的 "PCI Subsystem Settings" 选项。该叙述是错误的。该 BIOS 选项的默认设置为 "enabled"。有关启用此选项所造成的影响的更多信息，请参见“Oracle Solaris 10 1/13 不支持在 BIOS 设置实用程序 "IO" 菜单中启用 "PCI Subsystem Settings" 选项”。

• 以下说明应添加到 "Install Power Supply" 过程中：

  ---

  注 -  After you have replaced Power Supply 0, you must reset the Oracle ILOM service processor (SP) to propagate the FRU top-level indicator (TLI) data to the new power supply.For instructions on resetting the SP, see the Oracle ILOM Administrator's Guide for Configuration and Maintenance at http://www.oracle.com/goto/ILOM/docs.Power Supply 1 does not contain FRU TLI data, and therefore does not require an SP reset after replacement.

  ---

  《Sun Server X3-2 Service Manual》显示的有关在服务器中安装处理器的过程和示例不正确。使用以下内容替换 "Install a Processor" 下步骤 16b 的过程和示例：

  b. To clear the fault identified in Step 16a, type the following command:

  -> set /SYS/MB/P0 clear_fault_action=true

  For example:

  -> set /SYS/MB/P0 clear_fault_action=true
  Are you sure you want to clear /SYS/MB/P0 (y/n)? y
  Set ‘clear_fault_action' to 'true'