Configure Switch 2

1. Shut down the spanning tree.

   SEFOS# configure terminal
   SEFOS(config)# shutdown spanning-tree

2. Disable GVRP and GMRP.

   SEFOS(config)# set gvrp disable
   SEFOS(config)# set gmrp disable

3. Create the interface for VLAN 2, and enable IPv6.

   SEFOS(config)# interface vlan 2
   SEFOS(config-if)# shutdown
   SEFOS(config-if)# ipv6 enable
   SEFOS(config-if)# ipv6 address fec0::2222:0:2 96 unicast
   SEFOS(config-if)# no shutdown
   SEFOS(config-if)# exit

4. Create the P15 interface in VLAN 2.

   SEFOS(config)# vlan 2
   SEFOS(config-vlan)# ports extreme-ethernet 0/15 untagged extreme-ethernet 0/15
   SEFOS(config-vlan)# exit

5. Configure the extreme-ethernet interface.

   SEFOS(config)# interface extreme-ethernet 0/15
   SEFOS(config-if)# switchport pvid 2
   SEFOS(config-if)# no shutdown
   SEFOS(config-if)# exit

6. Enable IPv6 in VLAN 3.

   SEFOS(config)# interface vlan 3
   SEFOS(config-if)# shutdown
   SEFOS(config-if)# ipv6 enable
   SEFOS(config-if)# ipv6 address fec0::3333:0:2 96 unicast
   SEFOS(config-if)# no shutdown
   SEFOS(config-if)# exit

7. Create the P3 interface in VLAN 3.

   SEFOS(config)# vlan 3
   SEFOS(config-vlan)# ports extreme-ethernet 0/3 untagged extreme-ethernet 0/3
   SEFOS(config-vlan)# exit

8. Configure the extreme-ethernet interface.

   SEFOS(config)# interface extreme-ethernet 0/3
   SEFOS(config-if)# switchport pvid 3
   SEFOS(config-if)# no shutdown
   SEFOS(config-if)# end

9. Configure the IPv6 routing on switch 2.

   SEFOS# configure terminal
   SEFOS(config)# ipv6 route fec0::1111:0:0 96 fec0::3333:0:1
   SEFOS(config)# exit

10. Review the IPv6 information on switch 1.

    SEFOS# show ipv6 interface
     
    vlan1 is up, line protocol is up
        Link local address:
            fe80::201:2ff:fe03:501
        Global unicast address(es):
            fec0::1111:0:1/96
        Joined group address(es):
            ff02::1
            ff02::2
            ff02::1:ff00:1
            ff02::1:ff03:501
        MTU is 9216
        ICMP redirects are enabled
        ND DAD is enabled, Number of DAD attempts: 1
        ND router advertisement is disabled
    vlan3 is up, line protocol is up
        Link local address:
            fe80::201:2ff:fe03:501
        Global unicast address(es):
            fec0::2222:0:1/96
        Joined group address(es):
            ff02::1
            ff02::2
            ff02::1:ff00:1
            ff02::1:ff03:501
        MTU is 1500
        ICMP redirects are enabled
        ND DAD is enabled, Number of DAD attempts: 1
        ND router advertisement is disabled

11. Review the IPv6 routing table on switch 1.

    SEFOS# show ipv6 route
     
    IPv6 Routing Table:
    Codes : C - Connected, S - Static
            O - OSPF, R - RIP, B - BGP
    C   fec0::1111:0:0/96   [1/1]
            via ::, vlan1
     
    C   fec0::2222:0:0/96   [1/1]
            via ::, vlan3
     
    S   fec0::3333:0:0/96   [1/20]
            via fec0::2222:0:10, vlan3

12. Review the IPv6 information on switch 2.

    SEFOS# show ipv6 interface
    vlan1 is up, line protocol is up
        Link local address:
            fe80::202:2ff:fe03:401
        Global unicast address(es):
            Not Configured.
        Joined group address(es):
            ff02::1
            ff02::2
            ff02::1:ff03:401
        MTU is 1500
        ICMP redirects are enabled
        ND DAD is enabled, Number of DAD attempts: 1
        ND router advertisement is disabled
    vlan2 is up, line protocol is up
        Link local address:
            fe80::202:2ff:fe03:401
        Global unicast address(es):
            fec0::3333:0:1/96
        Joined group address(es):
            ff02::1
            ff02::2
            ff02::1:ff00:1
            ff02::1:ff03:401
        MTU is 1500
        ICMP redirects are enabled
        ND DAD is enabled, Number of DAD attempts: 1
        ND router advertisement is disabled
    vlan3 is up, line protocol is up
        Link local address:
            fe80::202:2ff:fe03:401
        Global unicast address(es):
            fec0::2222:0:10/96
        Joined group address(es):
            ff02::1
            ff02::2
            ff02::1:ff00:10
            ff02::1:ff03:401
        MTU is 1500
        ICMP redirects are enabled
        ND DAD is enabled, Number of DAD attempts: 1
        ND router advertisement is disabled

13. Review the routing table information in switch 2.

    SEFOS# show ipv6 route
     
    IPv6 Routing Table:
    Codes : C - Connected, S - Static
            O - OSPF, R - RIP, B - BGP
    S   fec0::1111:0:0/96   [1/20]
            via fec0::2222:0:1, vlan3
     
    C   fec0::2222:0:0/96   [1/1]
            via ::, vlan3
     
     
    C   fec0::3333:0:0/96   [1/1]
            via ::, vlan2