JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
Oracle Ethernet Switches

L2 and L3 Deployment Best Practices

search filter icon
search icon

Document Information

Using This Documention

Product Notes

Related Documentation

CLI Command Modes

Feedback

Support and Accessibility

Switches Overview

Oracle Switch ES1-24

Sun Network 10GbE Switch 72p

Sun Blade 6000 Ethernet Switched NEM 24p 10GbE

Understanding L2 and L3 Implementations

L2 and L3 Configuration Task Overview

L2 and L3 Topology

L2 and L3 VLAN Best Practices

Adding VLANs

Add an Untagged VLAN

Add a Tagged VLAN

L2 Based Configuration Example Using PVRST Protocol

L2 PVRST Example Overview

L2 PVRST Configuration Task Overview

Configuring a Basic L2 PVRST Based Topology

Configure Switch ToR72p-1 for L2 PVRST

Configure Switch ToR72p-2 for L2 PVRST

Configure Switch ES1-24p-1 for L2 PVRST

Configure Switch ES1-24p-2 for L2 PVRST

Verify the L2 PVRST Configuration

Configuring an L2 PVRST Based Topology With Active/Standby Bond on the Servers

Prepare Switch ToR72p-1 for L2 PVRST Active/Standby on the Servers

Prepare Switch ToR72p-2 for L2 PVRST Active/Standby on the Servers

Configure Switch ES1-24p-1 for L2 PVRST Active/Standby on the Servers

Configure Switch ES1-24p-2 for L2 PVRST Active/Standby on the Servers

Verify the L2 PVRST Active/Standby Configuration on the Servers

Configuring an L2 PVRST and LLA Based Topology With Active/Active Bond on the Servers

Configure Switch ES1-24p-1 for L2 PVRST LLA Active/Active on the Servers

Configure Switch ES1-24p-2 for L2 PVRST LLA Active/Active on the Servers

Configure Switch ToR72p-1 for L2 PVRST LLA Active/Active on the Servers

Configure Switch ToR72p-2 for L2 PVRST LLA Active/Active on the Servers

Verify the L2 PVRST LLA Active/Active Configuration on the Servers

L3 RIP and OSPF Configuration Overview

L3 Implementations Overview

L3 RIP and OSPF Configuration Task Overview

Configuring L3 Routing Based Topology Using RIP

Configure Switch TOR72p-1 for L3 Routing Using RIP

Configure Switch TOR72p-2 for L3 Routing Using RIP

Configure Switch ES1-24p-1 for L3 Routing Using RIP

Configure Switch ES1-24p-2 for L3 Routing Using RIP

Verify the L3 RIP Configuration

Configuring L3 Routing Based Topology Using OSPF

Configure Switch TOR72p-1 for L3 Routing Using OSPF

Configure Switch TOR72p-2 for L3 Routing Using OSPF

Configure Switch ES1-24p-1 for L3 Routing Using OSPF

Configure Switch ES1-24p-2 for L3 Routing Using OSPF

Verify the L3 OSPF Configuration

Glossary

Index

Using This Documention

This guide describes how to configure common usage topologies.

These instructions are for enterprise network and system administrators.

Product Notes

For late-breaking information and known issues about Oracle Ethernet switches used in this guide, refer to the product notes.

For Oracle Switch ES1-24:

http://www.oracle.com/goto/ES1-24/docs

For Sun Network 10GbE Switch 72p:

http://www.oracle.com/goto/SN-10GbE-72p/docs

For Sun Blade 6000 Ethernet Switched NEM 24p 10GbE:

http://www.oracle.com/goto/SB6K-24p-10GbE/docs

Related Documentation

Documentation
Links
All Oracle products
Oracle Switch ES1-24
Sun Network 10GbE Switch 72p
Sun Blade 6000 Ethernet Switched NEM 24p 10GbE
Oracle Integrated Lights Out Manager (Oracle ILOM) 3.0

For detailed information about the commands and options described in this document, refer to the Sun Ethernet Fabric Operating System CLI Base Reference Manual and the Sun Ethernet Fabric Operating System CLI Enterprise Reference Manual.

CLI Command Modes

The following table lists the configuration modes used in this document with their access and exit methods.

Command Mode
Access Method
Prompt
Exit Method
User EXEC
Access SEFOS from Oracle ILOM with read-only rights (privilege level 1).
SEFOS>
Use the logout or exit command to return to the Oracle ILOM prompt.
Privileged EXEC
Access SEFOS from Oracle ILOM with full administrative rights (privilege level 15).
SEFOS#
Use the logout or exit command to return to the Oracle ILOM prompt.
Global Configuration
From User EXEC mode, use the configure terminal command.
SEFOS(config)#
Use the end command to return to Privileged EXEC mode.
Interface Configuration
From Global Configuration mode, use the interface interface-type interface-id command.
SEFOS(config-if)#
Use the exit command to return to Global Configuration mode, or use the end command to return to Privileged EXEC mode.

Feedback

Provide feedback on this documentation at:

http://www.oracle.com/goto/docfeedback

Support and Accessibility

Oracle customers have access to electronic support through My Oracle Support. For information visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.