Hardware and Software Requirements
Installing InfiniBand on Oracle Solaris OS
InfiniBand for Oracle Solaris OS
Verify the Installation (Oracle Solaris)
Update the Firmware (Oracle Solaris)
InfiniBand Devices (Oracle Solaris)
Installing InfiniBand on Oracle Linux OS
InfiniBand for Oracle Linux OS
Enable Ethernet Over Oracle IB Gateway
Verify the Installation (Oracle Linux)
Replacing a Short Bracket With a Tall Bracket
Remove the Short Bracket From the Adapter
The adapter is compliant with the InfiniBand Architecture Specification, Release 1.2. The adapter has two compliant 4x InfiniBand ports, 1 and 2. The adapter provides access to these ports by means of two 4x InfiniBand QSFP+ connectors for external InfiniBand cables. These cables must be compliant with the InfiniBand Architecture Specification, Release 1.2. Connector 1 connects to Port 1 of the device, while connector 2 connects to Port 2.
The adapter is embedded with a media-detect circuit, which supports external InfiniBand fiber solutions. These external devices are connected to the InfiniBand port connectors using active media converters, such as the Oracle QSFP+ parallel short wave transceiver (X2124a-N).