JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
Oracle Dual Port QDR InfiniBand Adapter M3

User's Guide

search filter icon
search icon

Document Information

Using This Documentation

Product Notes

Related Documentation

Feedback

Access to Oracle Support

Installing the Adapter

Hardware and Software Requirements

Install the Adapter

Adapter Features

Adapter Specifications

InfiniBand Interface

PCIe Interface

LEDs and Ports

I2C Compatible Interface

Node GUID

Installing InfiniBand on Oracle Solaris OS

InfiniBand for Oracle Solaris OS

Verify the Installation (Oracle Solaris)

Update the Firmware (Oracle Solaris)

InfiniBand Devices (Oracle Solaris)

Installing InfiniBand on Oracle Linux OS

InfiniBand for Oracle Linux OS

Enable Ethernet Over Oracle IB Gateway

Verify the Installation (Oracle Linux)

Replacing a Short Bracket With a Tall Bracket

Remove the Short Bracket From the Adapter

Assemble and Install a Tall Bracket

Glossary

Index

Adapter Specifications

The adapter receives power from the PCI Express edge connector. All other required power voltages are generated by on-board switch mode regulators.

Physical
Size

Connector

2.71in. x5.6 in. (68.90mm x 142.25 mm)

QSFP+ InfiniBand (copper and optical)

Protocol Support
InfiniBand
IBTA v1.2.1, autonegotiation

SDR, DDR, and QDR:

  • Links: 1x/4x

  • Speeds per lane: 2.5 Gb/s, 5 Gb/s, and 10 Gb/s

QoS
8 InfiniBand virtual lanes for each port
RDMA support
All ports
PCIe
PCIe 3.0 compliant: SERDES @ 8.0GT/s, 8 lanes (2.0 and 1.1 compatible)
Power and Environmental
Voltage
12V, 3.3V
Typical power
Passive Cables 7.94W
Maximum power
Passive Cables 9.35W
Temperature
Operational 0 to 55°C

Non-operational 0 to 70°C

Humidity
90% relative humidity
Regulatory
Safety
IEC/EN 60950-1:2006, ETSI EN 300 019-2-2
Environmental
IEC 60068-2- 64, 29, 32
RoHS
RoHS-R6
Related Information