| Sun Storage Common Array Manager CLI Guide, Version 6.9.0 |    
|
| Sun Storage Common Array Manager CLI Guide, Version 6.9.0 |
|
| C H A P T E R 4 |
Configuration Commands for Arrays with RAID Controllers |
This chapter describes the sscs commands and their options for arrays with RAID controllers, including:
For monitoring and administration commands for all Oracle arrays, see Chapter 3.
add -a <array-name> -h <host-name[,host-name...]> hostgroup <host-group-name>
-a,--array <array-name>
Specifies the array associated with this host.
-h,--host <host-name[,host-name...]>
Specifies the host or hosts that you want to add to the host group.
hostgroup <host-group-name>
Specifies a host group name of up to 16 alphanumeric characters, underscores, dashes, and spaces.
sscs add -a array00 -h host01,host02 hostgroup hg01
Adds a license to the specified array.
add -a <array-name> -l <license-file> license
Adds a license to the specified array.
-a,--array <array-name>
Specifies the array to associate with this license.
-l,--license <license-file>
Specifies the license to associate with this array. The location specified must be a regular file path supported by the management host OS (URL paths are not supported). The license file can be in either the .xml or .key formats.
| Note - The file extension does not need to be specified. |
sscs add -a array_test -l C:\temp\licenses\snapshot-license license
Adds a license to the array_test array from the specified location.
create -a <array-name> [ -g <host-group-name> ] host <host-name> create -a <array-name> [-g <hostgroup-name>] [-w <string[,string...]>] [-d <description-text>] host <host-name>
Creates a storage host where data is initiated.
Specifies the name of the array on which you want to create a host. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
Specifies the initiator World Wide Name (WWN).
-d,--description <description-text>
Specifies the host description.
-g,--hostgroup <host-group-name>
Specifies a host group with which you associate this new host.
Specifies the name of the host that you want to create, using up to 16 alphanumeric characters, underscores, dashes, and spaces.
sscs create -a array00 host host1
create -a <array-name> hostgroup <host-group-name>
Creates a group of hosts to share storage.
-a,--array <array-name>
Specifies the array on which you want to create a host group.
hostgroup <host-group-name>
Specifies the name of the host group that you want to create, using up to 16 alphanumeric characters, underscores, dashes, and spaces.
sscs create -a array00 hostgroup hg1
create -a <array-name> -h <host-name> [-o <string>] [-i <iqn-string>] [ -u <none|CHAP>] initiator <initiator-name>
create -a <array-name> -w <initiator-WWN> [-h <host-name>] [-o <string>] initiator <initiator-name>
Creates a FC or iSCSI initiator.
-a,--array <array-name>
Specifies the array. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-h,--host <host-name>
Specifies the data storage host name.
-i,--iqn <iqn-string>
Specifies the iSCSI qualified name (IQN) for the initiator.
-o,--os-type <string>
Specifies the operating system (OS) type. Use the command sscs list -a <array-name> os-type to view all of the operating systems that are supported by the array. Then, use an applicable OS type value for <string>.
-u,--authentication <none|CHAP>
Specifies to use the Challenge Handshake Authentication Protocol (CHAP) authentication method for accessing the target. Values are CHAP or none.
-w,--wwn <initiator-WWN>
Specifies the initiator World Wide Name (WWN). For example: 210000e08b047212.
initiator <initiator-name>
Specifies an initiator name of up to 16 alphanumeric characters, underscores, dashes, and spaces.
sscs create -a IEC_iSCSI_LCA -h Myhost_19852 -o SOLARIS_MPXIO -i iqn.2001-06.com.sun:fvt3init21.sys1 -u CHAP initiator initiSCSI
sscs create -a array00 -w 210000e08b047212 -h host01 -o AIX initiator myInitiator-01
Creates an empty storage pool on the array.
create -a <array-name> -p <profile-name> [ -d <description> ] pool <pool-name>
Creates an empty storage pool on the array and assigns a profile to it.
-a,--array <array-name>
Specifies the array. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-d,--description <description>
Specifies a description of the pool. The description can be up to 256 alphanumeric characters, which can include underscores, dashes, colons, commas, parentheses, curly brackets, square brackets, ticks, tildes, bars, periods, or spaces.
-p,--profile <profile-name>
Specifies a profile to associate with the pool.
pool <pool-name>
Specifies a pool name of up to 32 characters including A-Z, a-z, 0-9, - (dash), and _ (underscore). Spaces are not allowed.
sscs create -a array00 -p Database pool SP048763
Creates a storage profile on the array.
create -a <array-name> -r <<0|1>|<3|5|6>> -s <16K|32K|64K|128K|256K|512K> -h <on|off> -n <variable|<1..224>|<1..30>> [-k <ANY|FC|SAS|SATA|SSD>] [-H <yes|no>] [-d <profile-description>] profile <profile-name>
Profiles for the most common configurations come with the software. This command creates a custom storage profile and assigns it to an array.
-a,--array <array-name>
-d,--description <profile-description>
Specifies a profile description of up to 256 alphanumeric characters, which can include underscores, dashes, colons, commas, parentheses, curly brackets, square brackets, ticks, tildes, bars, periods, or spaces.
-k,--disk-type <ANY|FC|SAS|SATA|SSD>
SATA - Serial Advanced Technology Attachment
-h,--readahead <on|off>
Specifies whether the read ahead option is on or off.
-H,--dedicated-hot-spare <yes|no>
Specifies whether you want this disk to be a dedicated hot spare.
-n,--number-of-disks <variable|<1..224>|<1..30>>
Specifies the number of disks. variable indicates that the number of disks is not fixed and can change. <1..224> is used in combination with RAID levels 0 and 1. <1..30> is used in combination with RAID levels 3, 5, and 6.
-r,--raid-level <<0|1>|<3|5|6>>
Specifies the RAID level. <0|1> is used in combination with number-of-disks 1 to 224. <3|5|6> is used in combination with number-of-disks 1 to 30.
-s,--segsize <16K|32K|64K|128K|256K|512K>
profile <profile-name>
Specifies a profile name of up to 32 characters including A-Z, a-z, 0-9, - (dash), and _ (underscore). Spaces are not allowed.
sscs create -a array00 -r 1 -s 64K -h on -n variable -D FC -d Custom-Database-Profile profile DatabaseProfile
Creates a storage replication set using a peer World Wide Name or remote array name.
Create a storage replication set linking the local volume with the remote volume via a peer World Wide Name:
create -a <array-name> -l <volume-name> -w <peer-WWN> -o <volume-name> -m <sync|async> [-G <yes|no>] [-R <lowest|low|medium|high|highest>] [-s <enable|disable>] repset
Create a replication set linking the local volume with the remote volume via a remote array name:
create -a <array-name> -l <volume-name> -A <remote-array-name> -o <volume-name> -m <sync|async> [-G <yes|no> ] [-R <lowest|low|medium|high|highest>] [-s <enable|disable>] repset
Creates a storage replication set using a peer World Wide Name or remote array name.
-a,--array <array-name>
Specifies the array. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-A,--remote-array <remote-array-name>
Specifies the remote array. Options -A and -w are mutually exclusive.
-G,--consistency-group <yes|no>
Specifies whether or not you want to add this replication set to the array consistency group. Note that the default value (no) is only allowed with the asynchronous mode option.
-l,--local-volume <volume-name>
Specifies the local volume name.
-m,--mode <sync|async>
Specifies whether the mode is synchronous or asynchronous.
-o,--remote-volume <remote-volume-name>
Specifies the remote volume name.
-R,--replication-priority <lowest|low|medium|high|highest>
Specifies the priority of this replication set. If no priority is specified, the default is medium.
-s,--auto-sync <enable|disable>
Specifies whether the auto synchronization policy is enabled. If it is not specified, the default is disabled.
-w,--peer-wwn <peer-WWN>
Specifies the peer World Wide Name.
sscs create -a europe -l euro_sales -w 17:76:18:12:18:49:18:62:19:14:19:39:19:47:19:61 -o euro_sales -m async -G no -R medium -s enable repset
Creates a replication set of the euro_sales volume that exists on the array named europe. In the process, it uses the euro_sales volume on the array whose WWN is 17:76:18:12:18:49:18:62:19:14:19:39:19:47:19:61 and sets it to synchronize asynchronously with a medium priority with the write order not preserved and resynchronization performed automatically. This repset is called euro_sales/1.
sscs create -a corp_west -l crm-sales -w 17:76:18:12:18:49:18:62:19:14:19:39:19:47:19:61 -o crm-sales -m async -G no -R medium -s enable repset
Creates a replication set of the crm-sales volume that exists on the array named corp_west. In so doing, it uses the crm-sales volume on the array whose WWN is 17:76:18:12:18:49:18:62:19:14:19:39:19:47:19:61 and sets it to synchronize asynchronously with the highest priority with the write order preserved and resynchronization performed automatically. This repset is called crm-sales/1.
sscs create -a europe -l euro_sales -A corporate -o euro_sales -m async -G no -R medium -s enable repset
Creates a replication set of the euro_sales volume that exists on the array named europe. In the process, it uses the euro_sales volume on the corporate array and sets it to synchronize asynchronously with a medium priority with the write order not preserved and resynchronization performed automatically. This repset is called euro_sales/1.
sscs create -a corp_west -l crm-sales -A corporate -o crm-sales -m async -G yes -R highest -s enable repset
Creates a replication set of the crm-sales volume that exists on the array named corp_west. In so doing, it uses the crm-sales volume on the corporate array and sets it to synchronize asynchronously with the highest priority with the write order preserved and resynchronization performed automatically. This repset is called
crm-sales/1.
Creates a snapshot for the specified volume.
create -a <array-name> -V <source-volume-name> [-f <failbasewrite|failsnapshot>] [-v <virtual-disk-name>] [-m <volume-name>] [-w <0..100>] [-n <<1..224>|<1..30>>] [-d <disk-name[,disk-name...]>] [-r <<0|1>|<3|5|6>>] [-k <ANY|FC|SAS|SATA|SSD>] [-Z <number<TB|GB|MB|KB|Bytes|BLK>>] [-C <integer>] [-L <low|verylittle|little|average|high|full>] [-l <0..100>] [-P <pool-name>] [-D <description-text>] snapshot <snapshot-name>
Creates a snapshot for the specified volume. Once the snapshot volume is created, it can be treated as any other volume, with the exception that it cannot be used to create another snapshot.
-a,--array <array-name>
Specifies the array associated with this snapshot. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-C,--snapshot-count <integer>
Specifies the number of intended snapshots for the volume.
-D,--description <description-text>
Specifies a description of the snapshot.
-d,--disk <disk-name[,disk-name...]>
Specifies the name of the disk or disks that will be used to create the snapshot volume. Options -d and -n cannot be used at the same time, and specification of either one results in a new virtual disk being created.
-f,--fail-policy <failbasewrite|failsnapshot>
The fail policy specifies what to do if and when the snapshot fills up:
failbasewrite - Stop allowing writes to the base volume.
failsnapshot - Stop allowing writes to the snapshot. This is the default.
-k,--disk-type <ANY|FC|SAS|SATA|SSD>
SATA - Serial Advanced Technology Attachment
-L,--snapshot-level <low|verylittle|little|average|high|full>
The snapshot level should be set to the percentage of the base volume that is expected to be overwritten during the snapshot's lifetime. This determines the amount of storage allocated to the snapshot (that is, the size of its reserve volume). To maintain the snapshot of the base volume's state, data in the base volume that is about to be overwritten is copied into the snapshot reserve space.
The snapshot levels equate to the following percentages:
-l,--snapshot-percentage <0..100>
Specifies what percentage of the volume is to be used for snapshot creation.
-m,--reserve-name <volume-name>
Specifies the name of the reserve volume. If no name is specified, a name is created and assigned automatically.
-n,--number-of-disks <<1..224>|<1..30>>
Specifies the number of disks in the snapshot volume. <1..224> is used in combination with RAID levels 0 and 1. <1..30> is used in combination with RAID levels 3, 5, and 6.
-P,--snapshot-pool <pool-name>
Specifies the name of the snapshot.
-r,--raid-level <<0|1>|<3|5|6>>
Specifies the RAID level. <0|1> is used in combination with number-of-disks 1 to 224. <3|5|6> is used in combination with number-of-disks 1 to 30.
-v,--reserve-vdisk <virtual-disk-name>
This option is mutually exclusive from the -d, -k, -n, and -r options.
If a reserve virtual disk is not specified:
If a reserve virtual disk is specified:
-V,--volume <source-volume-name>
Specifies the source volume from which to take a snapshot.
-w,--warning-threshold <0..100>
Specifies when to inform you that the snapshot reserve volume is near capacity. If a warning threshold is not specified, 50% is used.
-Z,--snapshot-reserve-size <number<TB|GB|MB|KB|Bytes|BLK>>
Specifies the amount of space you want to reserve for capacity of the snapshot reserve volume.
snapshot <snapshot-name>
Specifies the snapshot name of up to 16 alphanumeric using characters, underscores, dashes, and spaces.
sscs create -a array00 -V vol0 snapshot vol01_snap
create -a <array-name> -p <pool-name> -d <disk-name[,disk-name...]> [-S] vdisk <virtual-disk-name> create -a <array-name> -p <pool-name> -n <integer> [-S] vdisk <virtual-disk-name>
| Note - For the 6140 array, this command is only supported with firmware version 07.xx.xx.xx. |
-a,--array <array-name>
Specifies the array associated with this virtual disk.
-d,--disks <disk-name[,disk-name...]>
Specifies particular disks to be added to the virtual disk.
-n,--number-of-disks <integer>
Specifies the number of disks to be added to the virtual disk.
-p,--pool <pool-name>
Specifies the storage pool associated with this virtual disk.
-S,--secure
Specifies to create a secure virtual disk.
vdisk <virtual-disk-name>
Specifies the virtual disk that you want to modify.
sscs create -a array00 vdisk vdisk1
Creates a volume within a specified pool.
create -a <array-name> -p <pool-name> -F [-c <A|B>] volume <volume-name> create -a <array-name> -p <pool-name> -s <number<TB|GB|MB|KB|Bytes|BLK>> [-n <1..30>] [-d <disk-name[,disk-name...]>] [-c <A|B>] volume <volume-name> create -a <array-name> -p <pool-name> -s <number<TB|GB|MB|KB|Bytes|BLK>> -C <integer> [-n <1..224>] [-d <disk-name[,disk-name...]>] [-f <volume|snapshot>] [-w <0..100>] [-V <virtual-disk-name>] [-c <A|B>] volume <volume-name> create -a <array-name> -p <pool-name> -s <number<TB|GB|MB|KB|Bytes|BLK>> -C <integer> [-n <1..30>] [-d <disk-name[,disk-name...]>] [-f <volume|snapshot>] [-w <0..100>] [-V <virtual-disk-name>] [-c <A|B>] volume <volume-name> create -a <array-name> -p <pool-name> -s <number<TB|GB|MB|KB|Bytes|BLK>> [-v <virtual-disk-name>] volume <volume-name> create -a <array-name> -p <pool-name> -s <number<TB|GB|MB|KB|Bytes|BLK>|max> [-v <virtual-disk-name>] [-c <A|B>] volume <volume-name> create -a <array-name> -p <pool-name> -s <number<TB|GB|MB|KB|Bytes|BLK>> [-n <1..224>] [-d <disk-name[,disk-name...]>] [-c <A|B>] volume <volume-name> create -a <array-name> -p <pool-name> -F [-v <virtual-disk-name>] [-d <disk-name[,disk-name...]>] [-c <A|B>] volume <volume-name> create -a <array-name> -p <pool-name> -s <number<TB|GB|MB|KB|Bytes|BLK>|max> [-v <virtual-disk-name>] [-d <disk-name[,disk-name...]>] [-c <A|B>] volume <volume-name> create -a <array-name> -p <pool-name> -C <integer> -Z <number<TB|GB|MB|KB|Bytes|BLK>> [-v <virtual-disk-name>] [-d <disk-name[,disk-name...]>] [-f <volume|snapshot>] [-w <0..100>] [-V <virtual-disk-name>] [-c <A|B>] volume <volume-name> create -a <array-name> -p <pool-name> -s <number<TB|GB|MB|KB|Bytes|BLK>> -C <integer> -F [-d <disk-name[,disk-name...]>] [-f <volume|snapshot>] [-w <0..100>] [-V <virtual-disk-name>] [-c <A|B>] volume <volume-name> create -a <array-name> -p <pool-name> -F [-c <A|B>] [-S] volume <volume-name> create -a <array-name> -p <pool-name> -s <number<TB|GB|MB|KB|Bytes|BLK>> [-n <1..224>] [-d <disk-name[,disk-name...]>] [-c <A|B>] [-S] volume <volume-name> create -a <array-name> -p <pool-name> -s <number<TB|GB|MB|KB|Bytes|BLK>> -C <integer> [-n <1..224>] [-d <disk-name[,disk-name...]>] [-f <volume|snapshot>] [-w <0..100>] [-V <virtual-disk-name>] [-c <A|B>] [-S] volume <volume-name>
Creates a volume within a specified pool. You can have up to 2048 volumes per array.
-a,--array <array-name>
Specifies the array. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-C,--snapshot-count <integer>
Specifies the number of intended snapshots for the volume.
-c,--controller <A|B>
-d,--disk <disk-name[,disk-name...]>
Specifies the name of the disk. You can use this option with either the -n option or the -v option, but not with both -n and -v at the same time.
-F,--fill-vdisk
Specifies to use all available space on a virtual disk when creating a new volume and virtual disk simultaneously. This creates the largest possible virtual disk that matches the attributes of the specified pool. NOTE: See the -s,--size option (with max value) to use all available space on an existing virtual disk.
-f,--favor <volume|snapshot>
Favors the volume or snapshot.
-L,--snapshot-level <low|verylittle|little|average|high|full>
Specifies the level of snapshot activity. The snapshot levels equate to the following percentages:
-l,--snapshot-percentage <0..100>
Specifies what percentage of the volume is to be used for snapshot creation.
-n,--number-of-disks <1..30> or <1..224>
Specifies the number of disks in the volume. You can use this option with either the -d option or the -v option, but not with both -d and -v at the same time. Number-of-disks <1..30> is used in combination with a RAID level set at 3, 5, and 6. Number-of-disks <1..224> is used in combination with a RAID level set at 0 or 1.
-P,--snapshot-pool <pool-name>
Specifies the name of the snapshot.
-p,--pool <pool-name>
Specifies the name of the snapshot pool.
-S,--secure
Specifies to create a secure volume.
-s,--size <number<TB|GB|MB|KB|Bytes|BLK>> or <number<TB|GB|MB|KB|Bytes|BLK>|max>
Specifies the volume size. Sizes can be in terabytes, gigabytes, megabytes, kilobytes, bytes, or blocks. However, some command variants allow use of the max value to specify using all available space on an existing virtual disk. NOTE: See the -F,--fill-vdisk option to use all available space on a virtual disk when creating a new volume and vdisk simultaneously.
-V,--reserve-vdisk <virtual-disk-name>
Specifies a reserve virtual disk.
-v,--vdisk <virtual-disk-name>
Specifies the name of the virtual disk. You can use this option with either the -d option or the -n option, but not with both -d and -n at the same time.
-w,--warning-threshold <0..100>
Specifies when to inform you that the snapshot reserve volume is near capacity. If a warning-threshold is not specified, 50% is the default.
-Z,--snapshot-reserve-size <number<TB|GB|MB|KB|Bytes|BLK>>
Specifies the amount of space you want to reserve for capacity of the snapshot reserve volume.
volume <volume-name>
Specifies the volume name of up to 16 alphanumeric characters.
sscs create -a array01 -p pool1 -s 20GB volume ORACLE-1
create -a <array-name> -s <source-volume-name> -t <target-volume-name> [ -p lowest | low | medium | high | highest ] volume-copy
-a,--array <array-name>
Specifies the array associated with this volume.
-p,--priority lowest | low | medium | high | highest
Specifies the priority of this volume copy. If no priority is specified, the default is medium.
-s,--source-volume <volume-name>
Specifies the source volume name associated with this volume copy.
-t,--target-volume <volume-name>
Specifies the target volume name associated with this volume copy.
sscs create -a array00 -s vol01 -t vol02 volume-copy
delete -a <array-name> host <host-name,...>
Specifies the array associated with this host. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
host <host-name,...>
Specifies the host or hosts to delete.
sscs delete -a array00 host host01
Deletes one or more host groups.
delete -a <array-name> hostgroup <host-group-name,...>
Deletes one or more host groups.
-a,--array <array-name>
Specifies the array associated with this host group.
hostgroup <host-group-name,...>
Specifies the host group or host groups to delete.
sscs delete -a array00 hostgroup hg01
Deletes one or more initiators.
delete -a <array-name> [-T <iqn|initiator_name>] initiator <initiator-id[,initiator-id...]>
delete -a <array-name> [-T <wwn|initiator_name>] initiator <initiator-id[,initiator-id...]>
Deletes one or more initiators. The initiator or initiators must be unmapped or the command will fail.
-a,--array <array-name>
Specifies the array associated with this initiator or initiators. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-T,--name-type <<iqn|initiator_name>|<wwn|initiator_name>>
Specifies the initiator identifier type. For the iSCSI variant, specify iqn for an iSCSI qualified name (IQN) or initiator_name for a named initiator. For the FC variant, specify wwn for a World Wide Name or initiator_name for a named initiator. You can modify the WWN if the initiator is offline only.
initiator <initiator-id[,initiator-id...]>
Specifies the initiator identifier.
sscs delete -a array00 initiator myInitiator-01,myInitiator-02
delete -a <array-name> iscsi-session <session-identifier[,session-identifier...]>
Deletes iSCSI sessions associated with a specified array.
-a,--array <array-name>
Specifies the name of the array.
iscsi-session <session-identifier[,session-identifier...]>
Specifies one or more iSCSI sessions to delete.
sscs delete --array iSCSILCA2 iscsi-session 40:00:01:37:00:05:8
Deletes iSCSI session 40:00:01:37:00:05:8 for array iSCSILCA2.
delete -a <array-name> pool <pool-name[,pool-name...]>
Deletes one or more storage pools. This operation removes all associated virtual disks and volumes during the deletion of the storage pool. You can perform this action only when all volumes in the pool are unmapped.
-a,--array <array-name>
Specifies the array associated with this pool. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
pool <pool-name[,pool-name...]>
Specifies the storage pool or list of pools to delete.
sscs delete -a array00 pool SP048763
delete -a <array-name> profile <profile-name[,profile-name...]>
Deletes one or more storage profiles. You can only perform this function on a storage profile that has no storage pools associated with it.
-a,--array <array-name>
Specifies the array associated with this profile.
profile <profile-name[,profile-name...]>
Specifies the profile or profiles to delete.
sscs delete -a array00 profile MyProfile
Deletes one or more replication sets.
delete -a <array-name> repset <repset-name[,repset-name...]>
Deletes one or more replication sets.
-a,--array <array-name>
Specifies the array from which you want to delete the replication set. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
repset <repset-name[,repset-name...]>
Specifies the replication set or sets to delete.
sscs delete -a corporate repset finance/1
Deletes the replication of the finance volume on the array named corporate.
sscs delete -a corp_west repset crm-sales/1
Deletes the replication of the crm-sales volume on the array named corp_west.
Deletes one or more snapshots.
delete -a <array-name> snapshot <snapshot-name[,snapshot-name...]>
Deletes the specified snapshot.
-a,--array <array-name>
Specifies the array associated with this snapshot. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
snapshot <snapshot-name[,snapshot-name...]>
Specifies the snapshot or snapshots to delete.
sscs delete -a array00 snapshot snap1
Deletes one or more named virtual disks.
delete -a <array-name> vdisk <virtual-disk-name[,virtual-disk-name...]>
Deletes one or more specified virtual disks.
-a,--array <array-name>
Specifies the array associated with this virtual disk. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
vdisk <virtual-disk-name[,virtual-disk-name...]>
Specifies the vdisk or vdisks to delete.
sscs delete -a array00 vdisk vdisk1
Deletes one or more named volumes.
delete -a <array-name> [-k] volume <volume-name[,volume-name...]>
Deletes one or more named volumes. The volume must be unmapped or the deletion fails.
-a,--array <array-name>
Specifies the array associated with this volumes. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-k,--keep-vdisk
Specifies to keep the associated virtual disk intact. By default, if the volume targeted for deletion is the last volume on the associated virtual disk, the virtual disk is deleted.
| Note - The -k option is only supported by 2500 series arrays running firmware version 07.35.nn.nn and above, and 6000 series arrays running firmware version 07.10.nn.nn and above. |
volume <volume-name[,volume-name...]>
Specifies the volume or volumes to delete.
sscs delete -a array00 volume ORACLE-1
delete -a <array-name> -s <source-volume-name> -t <target-volume-name> volume-copy
Deletes a volume copy. This operation breaks the copy relationship between the two volumes, but it does not delete the volumes themselves. It also removes the read-only permission on the target volume.
-a,--array <array-name>
Specifies the array associated with this volume copy.
-s,--source-volume <volume-name>
Specifies the source volume associated with this volume copy.
-t,--target-volume <volume-name>
Specifies the target volume associated with this volume copy.
sscs delete -a array00 -s vol01 -t vol02 volume-copy
Disables one or more snapshots.
disable -a <array-name> snapshot <snapshot-name[,snapshot-name...]>
Disables one or more snapshots. Disabling a volume snapshot does not remove either the volume snapshot or its associated reserve volume.
When you disable a volume snapshot, only the specified snapshots are disabled. All other snapshots remain functional.
-a,--array <array-name>
Specifies the array associated with this snapshot.
snapshot <snapshot-name,...>
Specifies the names of the snapshots that you want to resnap.
sscs disable -a array00 snapshot snapshot1, snapshot2
Disables snapshot1 and snapshot2 on array00.
Prints the array configuration to standard output.
export [-L] array <array-name>
Prints the array configuration to standard output (XML format). To save the output to a file, the output must be redirected to a specified file name. That file can then be used for the import array command. See example usage below for proper redirect syntax.
-L,--lock-key
Specifies to retrieve the current encryption key from the specified array. The command will prompt you for the encryption key pass phrase. To ensure accuracy, you will be prompted to enter the pass phrase twice. For security, the supplied pass phrase will not be echoed back to you. If the -L option is not supplied, the array configuration is exported.
array <array-name>
Specifies the array that you want to export.
Export array information to the screen:
sscs export array array01
Export array information to an XML file saved to the sscs working directory:
sscs export array array01 > array01-config.xml
Export array information to an XML file saved to a specified location:
sscs export array array02 > D:\temp\array02-config.xml sscs export array array02 > /var/tmp/array02-config.xml
Exports one or more profiles into an XML representation.
export -a <array-name> profile [profile-name[,profile-name...]]
Exports one or more profiles into an XML representation. This outputs to standard output, and then you redirect it to a file or another mechanism.
-a,--array <array-name>
Specifies the array from which you want to export the profile.
profile [profile-name[,profile-name...]]
Specifies the profile or profiles to export. If no profiles are specified, all profiles are exported.
sscs export - a array00 profile > /tmp/all_profiles.xml
Sets a disk to the failed state.
fail -a <array-name> [ -t <tray-name> ] disk <disk-name>
Sets a disk to the failed state. This can create complications. Do not initiate this command without first consulting Sun Customer Service personnel.
-a,--array <array-name>
Specifies the array on which you want to fail the disk.
-t,--tray <tray-name>
Identifies the tray where the disk resides.
disk
Specifies the name of the disk.
sscs fail -a Array01 -t Tray20 disk t20d16 sscs fail -a Array01 disk t20d16
Applies an array configuration file to the specified array.
import -x <XML-location> [-L] [-n] array <array-name>
Applies an array configuration file to the specified array. This enables you to import the configuration file from one array to overwrite the configuration for this array.
-x,--xml <XML-location>
Specifies the location of the XML file to be imported. The XML location can be in the form of a url (http://... or file:///...) or a file name.
-L,--list
Specifies that no import take place. Instead, the array is checked against the XML file to ensure that it is compatible.
-n,--noclear
Specifies that the current array configuration will not be cleared. This preserves the current array configuration, including the mapping between the access LUN (LUN 31) and the management host. This mapping is required for in-band management of the array.
array <array-name>
Specifies the array to which the configuration file is applied.
sscs import -x array01-config.xml array array01 sscs import -x file:///tmp/array00_configuration.xml array array00 sscs import -x /tmp/array00_configuration.xml array array00
Imports one or more profiles from a specified XML file.
import -a <array-name> -x <XML-location> [-f] profile [profile-name[,profile-name...]] import -a <array-name> -x <XML-location> -L profile [profile-name[,profile-name...]]
Imports one or more profiles from a specified XML file. This allows you to import the configuration profile from one array to overwrite the configuration profile for this array.
array <array-name>
Specifies the array to which you want to import the profile.
-x,--xml <XML-location>
Specifies the location of an XML file containing the profiles to be imported. The XML location can be in the form of a URL (http://... or file:///...) or a file name.
-f,--force
Specifies the following actions when conflicts occur with the profiles:
Exists - Profiles are not imported.
Duplicate Settings - Profiles are imported, creating a new profile.
Conflicting - Profiles are imported, replacing the current profile of the same name.
In Use - Profiles are not imported.
If the force option is not specified, the following occurs:
Exists - Profiles are not imported.
Duplicate Settings - Profiles are not imported.
Conflicting - Profiles are not imported.
In Use - Profiles are not imported.
In all cases, both successful and failed imports are reported.
-L,--list
Lists all profiles. If the list option is specified, no import takes place. All profiles in the XML file (or all those specified by way of the <profile-name>) are listed, and each is identified as follows:
Exists - The profile already exists with all of the same parameter values.
Duplicate Settings - A profile with exactly the same parameters (the description and version can be different), but a different name exists, and no profile with the given name is in use by the system.
Conflicting - A profile with the same name exists, has different parameters, and is not currently in use by the system.
In Use - A profile with the same name exists, has different parameters, and is currently in use by the system.
New - None of the above labels apply.
profile [profile-name[,profile-name...]]
Specifies the profile or profiles to import. If no profile names are specified, all profiles in the given XML location are used.
sscs import -a array00 -f -x file:///tmp/all_profiles.xml profile
profile_name: Exists profile_name: Duplicate Settings profile_name: New profile_name: Conflicting
initialize -a <array-name> [-t <tray-name>] disk <disk-name>
Initializes a disk. If a disk from another array is inserted, and you want to use it in a different array, you might need to initialize it to remove any latent virtual disk information. All data on the disk will be lost. This can create complications. Do not initiate this command without first consulting Sun Customer Service personnel.
-a,--array <array-name>
Specifies the array on which you want to initialize the disk.
-t,--tray <tray-name>
Identifies the tray where the disk resides.
disk <disk-name>
Specifies the name of the disk.
sscs initialize -a Array01 -t Tray2 disk Disk6
Lists configuration information for the specified controller.
list -a <array-name> controller [ A | B ]
Lists configuration information for the specified controller.
-a,--array <array-name>
Specifies the array for which you want to view controller information.
controller A | B
Specifies the controller for which you want to view information. If no controller is specified, summary information for both controllers is displayed.
sscs list -a array01 controller
Controller: A | B
Mode: Active | Inactive
Quiesced: True | False
Status: Removed | Optimal | RPA Par Error | Failed | Service Mode
Drive Interface: FC | SATA | SAS | SSD
Cache Memory Size: n MB
Manufacturer: manufacturer
Serial Number: serial-number
Ethernet Port: 1
Use DHCP/BOOTP: On | Off
IP Address: IP-address
Gateway: IP-address
Net Mask: net-mask
Lists Fibre Channel port information for the controller of the specified array.
list -a <array-name> [-c <A|B>] fcport [fcport-id[,fcport-id...]]
Lists Fibre Channel (FC) port information for the controller of the specified array.
-a,--array <array-name>
Specifies the name of the array where the controller resides.
-c,--controller <A|B>
Specifies the controller for which you want Fibre Channel port information.
fcport [fcport-id[,fcport-id...]]
Specifies the Fibre Channel port or ports for which you want information. Ports are specified as A/1 to A/4 and B/1 to B/4. If no FC port is specified, details for all ports are displayed.
sscs list -a array00 fcport A/1
Topology: ARB Loop | Fabric | PTP | FAB Loop | Unknown
Speed: current-speed Gb/s (Gigabits per second)
Maximum Speed: maximum-speed Gb/s
Preferred Loop ID: 0..127 | N/A | Any
Channel Number: channel-number
Channel Joined With Another: True | False
Lists the host names and details for an individual host.
list -a <array-name> host [host-name[,host-name...]]
Lists the host names and details for an individual host.
-a,--array <array-name>
Specifies the array associated with this host. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
host [host-name[,host-name...]]
Specifies the host or hosts that you want to view in detail. When no host is specified, the names of all the hosts in the array are listed.
sscs list -a array00 host
Response Format (when no <host-name> value is specified)
Response Format (host detail when <host-name> value is specified)
Volume: volume-name LUN:LUN-ID
Volume: volume-name LUN:LUN-ID
Lists host group name and hosts for an individual host group.
list -a <array-name> hostgroup [hostgroup-name[,hostgroup-name...]]
Lists host group name and hosts for an individual host group.
-a,--array <array-name>
Specifies the array associated with this host group.
hostgroup [hostgroup-name[,hostgroup-name...]]
Specifies the host group that you want to view. When no host group is specified, the names of all the host groups in the array are listed.
sscs list -a array00 hostgroup
Response Format (when no <host-group-name> value is specified)
Response Format (host detail when the <host-group-name> value is specified)
Volume: volume-name LUN:LUN-ID
Volume: volume-name LUN:LUN-ID
Lists the initiators and provides a description of each.
list -a <array-name> [-T <iqn|initiator_name>] initiator [initiator-id[,initiator-id...]]
list -a <array-name> [-T <wwn|initiator_name>] initiator [initiator-id[,initiator-id...]]
Lists the initiators and provides a description of each.
-a,--array <array-name>
Specifies the array associated with this initiator. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-T,--name-type <<iqn|initiator_name>|<wwn|initiator_name>>
Specifies the initiator identifier type. For the iSCSI variant, specify iqn for an iSCSI qualified name (IQN) or initiator_name for a named initiator. For the FC variant, specify wwn for a World Wide Name or initiator_name for a named initiator.
initiator [initiator-id[,initiator-id...]]
Specifies the initiator identifier.
sscs list -a array01 -T initiator_name initiator myInitiator-01 sscs list -a array01 initiator myInitiator-01 sscs list -a iSCSILCA_2 -T iqn initiator
(list of initiators when no <initiator-ID> value is specified)
Initiator: initiator-ID ... Initiator: initiator-ID
(detail about the initiator when an <initiator-ID> value is specified)
Initiator: initiator-ID WWN: initiator-WWN Host: host-name OS Type: host-type
Displays iSCSI performance statistics for the StorageTek 2510 array and enables you to define the type of iSCSI performance statistics to monitor.
To display the performance statistics:
list -a <array-name[,array-name...]> -T [-b <true|false>] iperformance
To define the type of iSCSI performance statistics to monitor and the sort order of the output:
list -a <array-name[,array-name...]> -t <array_stats|controller_stats|volume_stats> [-c <A|B>] [-h <host-name[,host-name...]>] [-g <hostgroup-name[,hostgroup-name...]>] [-v <volume-name[,volume-name...]>] [-s <name|total_iops|read_percent|write_percent|total_data|avg_read_size|avg_read_rate|peak_read_rate|avg_write_size|avg_write_rate|peak_write_rate|cache_hit_percent>] [-b <true|false>] iperformance
Displays iSCSI performance statistics for the 2510 array and enables you to define the type of iSCSI performance statistics to monitor and the sort order of the output.
| Note - Only valid for 2510 arrays running firmware version 07.35.nn.nn or higher. |
-a,--array <array-name>
Specifies the name of the array associated with this iSCSI performance request.
-b,--baseline <true|false>
Sets the baseline time for the iSCSI array. If true, the current array time is used as the baseline time.
-t,--type <array_stats|controller_stats|volume_stats>
Specifies the type of statistics to list: array, controller, or volume.
-c,--controller <A|B>
Specifies controller A or controller B.
-h,--host <host-name[,host-name...]>
Specifies the host name of one or more hosts.
-g,--hostgroup <hostgroup-name[,hostgroup-name...]>
Specifies the name of one or more host groups.
-v,--volume <volume-name[,volume-name...]>
Specifies one or more volumes.
-s,--sort <name|total_iops|read_percent|write_percent|total_data|avg_read_size|avg_read_rate|peak_read_rate|avg_write_size|avg_write_rate|peak_write_rate|cache_hit_percent>
Specifies the value for sorting the performance output.
sscs list -a iSCSILCA_2 -T iperformance
Array: iSCSILCA_2 State: Off Polling Interval: 1 minute Data Retention Period: 1 hour BASELINE STATISTICS Controller A Baseline Time: date at time Controller B Baseline Time: date at time MAC Transmit Statistics MAC Receive Statistics TCP Statistics IPv4 Statistics IPv6 Statistics Target (Protocol) Statistics
sscs list --array iSCSILCA_2 --type array_stats --sort total_iops iperformance
List array statistics for iSCSILCA_2 and sort by total I/O operations per second.
list -a <array-name> [-c <A|B>] iscsi-port [display.name.iscsiport-id[,display.name.iscsiport-id...]]
Lists information for one or more iSCSI ports configured for a specified array.
-a,--array <array-name>
Specifies the name of the array.
-c,--controller <A|B>
Specifies controller A or B for which you want information.
iscsi-port [display.name.iscsiport-id[,display.name.iscsiport-id...]]
Specifies one or more iSCSI port IDs. For a detailed listing, specify controller/port.
sscs list --array iSCSILCA_2 iscsi-port B/1
Lists detail for iSCSI port 1 on controller B for array iSCSILCA_2.
Array: iSCSILCA_2
Controller: A
iSCSI Port: B/1
Port MAC: 00:A0:B8:20:34:69
Speed: 100 Mbps
Maximum Speed: 1 Gbps
Link Status: Up
Listening Port: 3260
MTU: 1500
ICMP Ping Responses: Enabled
IPv4: Enabled
DHCP: Off
IP Address: 10.8.88.167
Gateway: 10.8.88.1
Netmask: 255.255.255.0
VLAN: Disabled
VLAN ID: 0
Ethernet Priority: Disabled
Priority: 3
list -a <array-name> iscsi-session [session-identifier[,session-identifier...]]
Lists iSCSI sessions associated with a specified array. To list details of a specific iSCSI session, include the iSCSI session ID.
-a,--array <array-name>
Specifies the name of the array.
iscsi-session [session-identifier[,session-identifier...]]
Specifies the iSCSI session ID.
sscs list -a iSCSILCA_2 iscsi-session 40:00:01:37:00:00:8003
iSCSI Session iSCSI Target: iqn.1992-01.com.lsi:1535.600a0b80003487c10000000046cc4a1d iSCSI Session Identifier (SSID): 40:00:01:37:00:00:8003 Initiator Session Identifier (ISID): 40:00:01:37:00:00 Target Portal Group Tag: 2 Initiator iSCSI Name: iqn.1991-05.com.microsoft:funk.sun.com Initiator iSCSI Label: i1193868006 Initiator iSCSI Alias: fi1193868006 Host: fh1193262432 iSCSI Session Connection ID(s) Connection ID (CID): 0x1 Ethernet Port: Controller B, Port 2 Initiator IP Address: 10.8.88.103 Negotiated Login Parameters Authentication Method: None Header Digest Method: None Data Digest Method: None Maximum Connections: 4 Target Alias: iSCSI_LCA2 Initiator Alias: fi1193868006 Target IP Address: 10.8.88.175 Target Portal Group Tag: 2 Initial R2T: Yes Maximum Burst Length: 262144 Bytes First Burst Length: 8192 Bytes Default Time to Wait: 0 Seconds Default Time to Retain: 60 Seconds Maximum Outstanding R2T: 16 Error Recovery Level: 0 Maximum Receive Data Segment Length: 65536 Bytes
list -a <array-name> iscsi-target [target-name]
Lists iSCSI target name configured for the specified array. To list details, specify the iSCSI target name. Target name is the iSCSI qualified name (IQN), for example: iqn.199201.com.sun:1535.600a0b80002f9da000000000461255f9.
-a,--array <array-name>
Specifies the name of the array.
iscsi-target [target-name]
Specifies the iSCSI qualified name of the iSCSI target.
sscs list --array iSCSILCA_2 iscsi-target
iSCSI Target Name: iqn.1992-01.com.sun:1535.600a0b80003487c10000000046cc4a1d sscs list --array iSCSILCA_2 iscsi-target iqn.1992-01.com.sun:1535.600a0b80003487c10000000046cc4a1d
iSCSI Target Name: iqn.1992-01.com.lsi:1535.600a0b80003487c10000000046cc4a1d Alias: iSCSI_LCA2 Authentication: NONE CHAP Secret: ***** Unnamed Discovery: Enabled Sessions: 1 iSNS: Enabled IPv4: 10.8.88.56 DHCP: Off Port: 3205 Initiators server1: iqn.1991-05.com.microsoft:sun-pojdhrbx7tt server2: iqn.1991-05.com.sun.microsoft.jcz server3: iqn.1991-05.com.microsoft:sun-pojdhrbx7rr server4: iqn.1986-03.com.sun:01:0003ba3145ed.47032ecf server5: iqn.1986-03.com.sun:01:00144f010116.46fa5d9a server6: iqn.1986-03.com.sun:01:0003ba0442dd.47062a0f server7: iqn.1991-05.com.microsoft:sun-pojdhrbx7qq server8: iqn.2001-04.com.example.storage.tape:sys1.xyz server9: iqn.1991-05.com.microsoft:funk.sun.com server10: iqn.1991-05.com.microsoft:jim.bur.sun.com server11: iqn.1991-05.com.microsoft:parash.india.sun.com server12: iqn.1991-05.com.microsoft:pookawinxp server13: iqn.1991-05.com.microsoft:nms-lab8
Shows all licenses that are associated with the array, and related licensing details.
list -a <array-name> license [license-name[,license-name...]]
Shows all licenses that are associated with the array, along with related licensing details (serial number, controller serial number, and further details).
-a,--array <array-name>
Specifies the array associated with this license.
license [license-name[,license-name...]]
Specifies the name of a license or licenses. If you list specific licenses, then only the details of those licenses are shown.
sscs list -a corporate license
Lists all of the licenses on the corporate array.
sscs list -a corp_west license ReplicationSet
Lists the details of the replication set license on the corp_west array.
(when no <license-name> values are specified)
Array: array-name WWN: World-Wide-name Serial Number: serial-number Featured Enable Identifier: identifier License: license-name Description: description Status: Enabled | Disabled Quantity Licensed: quantity Quantity Used: quantity
(when <license-name> values are specified)
Array: array-name
WWN: World-Wide-name
Serial Number: serial-number
Featured Enable Identifier: identifier
License: license-name
Description: description
Status: enabled | disabled
Quantity Licensed: quantity
Quantity Used: quantity
Replication License Status: Activated | Deactivated
Repository Volume: replication-repository-name Size: number-of-megabytes Vdisk: virtual-disk-identifier
Licensed Items Sample Formats:
Snapshot:
Licensed Items:
Base Volume:vol_b13 Snapshot Volume:new-snap
Base Volume:dk_rep3 Snapshot Volume:dk_snap1
StorageDomain:
Licensed Items:
Host Group: t_hostgroup_2
Host: MIG-1
VolumeCopy
Licensed Items:
Source Volume:dk_rep1 Target Volume:dk_rep2
Source Volume:dk_vol3 Target Volume:dk_rep4
list -a <array-name> mapping [DefaultStorageDomain|host-name|hostgroup-name[,DefaultStorageDomain|host-name|hostgroup-name...]]
Lists mappings for the array. You can filter the output by specifying DefaultStorageDomain, a host name, or a host group name.
-a,--array <array-name>
Specifies the array for which to list mappings.
mapping [DefaultStorageDomain|host-name|hostgroup-name[,DefaultStorageDomain|host-name|hostgroup-name...]]
Lists all mappings for the specified array. Optionally, filters the output based on DefaultStorageDomain, a host name, or host group name.
List all mappings for a specified array:
sscs list -a array1 mapping Volume:PIVol1 LUN: 0 Mapped To: cam-oel Target Type: Host Permission: Read/Write Volume:PIVol2 LUN: 0 Mapped To: qlhosts Target Type: Host Group Permission: Read/Write Volume:PIVol3 LUN: 0 Mapped To: Default Storage Domain Target Type: Default Storage Domain Permission: Read/Write
List mappings filtered by host or hostgroup name:
sscs list -a array1 mapping cam-oel Volume:PIVol1 LUN: 0 Mapped To: cam-oel Target Type: Host Permission: Read/Write
List mapping to the default domain:
sscs list -a array1 mapping DefaultStorageDomain Volume:PIVol3 LUN: 0 Mapped To: Default Storage Domain Target Type: Default Storage Domain Permission: Read/Write
Shows the operating system types on this array.
Shows all of the operating systems that are supported by the array. The values returned can be used in subsequent requests to create or modify initiators, or to modify the default host type of the array.
-a,--array <array-name>
os-type
Shows all of the operating systems that are supported by the array.
sscs list -a testarray os-type SOLARIS_MPXIO - Solaris (with Traffic Manager) SOLAVT - Solaris (with Veritas DMP or other) SOLTPGS - Solaris Target Port Group Support W2KNETNCL - Windows 2000/Server 2003 non-clustered W2KNETCL - Windows 2000/Server 2003 clustered W2KNETNCLDMP - Windows 2000/Server 2003 non-clustered (with Veritas DMP) W2KNETCLDMP - Windows 2000/Server 2003 clustered (with Veritas DMP) AIX - AIX AIXAVT - AIX (with Veritas DMP) AIX_FO - AIX failover (6xxx) IBM_TS_SAN_VCE HPX - HPUX IRX - Irix LNX - Linux LNXAVT - Linux (with Veritas DMP) NWRFO - Netware failover VMWARE - VMware HPXTPGS - HPUX Target Port Group Support
Shows detailed performance statistics.
list -a <array-name[,array-name...]> -T performance list -a <array-name[,array-name...]> -t <array_stats|controller_stats|volume_stats> [-c <A|B>] [-h <host-name[,host-name...]>] [-g <hostgroup-name[,hostgroup-name...]>] [-v <volume-name[,volume-name...]>] [-s <name|total_iops|read_percent|write_percent|total_data|avg_read_size|avg_read_rate|peak_read_rate|avg_write_size|avg_write_rate|peak_write_rate|cache_hit_percent>] performance
Shows detailed performance statistics. You can use the following options only if a single array is specified:
--controller, --volume, --host, and --hostgroup
| Note - When using the local CLI sscs command, performance monitoring must be enabled before executing the list performance subcommand. Performance monitoring is turned on via the modify performance subcommand. See modify performance for further information. |
-a,--array <array-name>
Specifies the array or arrays associated with this performance request.
-T,--settings
Shows the current settings for the array, including state, polling interval, and data retention period. If this option is specified, all other options (except array) are ignored.
-t,--type <array_stats|controller_stats|volume_stats>
Specifies the type of statistics to list: array, controller, or volume.
-c,--controller <A|B>
Specifies the controller name.
-v,--volume <volume-name[,volume-name...]>
Specifies the volume name or volume names associated with this performance request.
-h,--host <host-name[,host-name...]>
Specifies the host name or host names associated with this volume.
-g,--hostgroup <hostgroup-name[,hostgroup-name...]>
Specifies the host group or host groups associated with this volume.
-s,--sort <name|total_iops|read_percent|write_percent|total_data|avg_read_size|avg_read_rate|peak_read_rate|avg_write_size|avg_write_rate|peak_write_rate|cache_hit_percent>
Specifies the sorting mechanism.
performance
Specifies the performance subcommand.
Array: array-name State: on | off Polling Interval: 1 minute | 5 minutes | 15 minutes Data Retention Period: forever | 1 hour | 2 hours | 4 hours | 1 day
NAME TOT IOPS READ % WRITE% TOT DATA AVG R SIZE AVG R /s PEAK R /s .... ==== ======== ====== ====== ======== ========== ======== ========= vol1 0.0 0.00 0.00 0.0 0.0 0.0 0.0 ... vol2 3.6 7.32 34.77 1030.3 32.7 4.5 10.4
Lists storage pool information.
list -a <array-name> pool [pool-name[,pool-name...]]
Lists storage pool information.
-a,--array <array-name>
Specifies the array associated with this pool. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
pool [pool-name[,pool-name...]]
Specifies the pool or pools for which you want detailed information. If no pools are specified, this subcommand lists summary information for all pools.
sscs list -a array01 pool SP048763
(summary of all pools when no <pool-name> value is specified)
Pool: pool-name Profile: profile-name Configured Capacity: capacity .... Pool: pool-name Profile: profile-name Configured Capacity: capacity
(detail of a pool when a <pool-name> value is specified)
Pool: pool-name Description: description Profile: profile-name Total Capacity: capacity MB | GB | TB Configured Capacity: capacity MB | GB | TB Available Capacity: capacity MB | GB | TB Volume: volume-name1 Volume: volume-name2
Lists the named storage profiles.
list -a <array-name> profile [profile-name[,profile-name...]]
Lists the named storage profiles.
-a,--array <array-name>
Specifies the array associated with this profile.
profile [profile-name[,profile-name...]]
Specifies the profile or profiles for which you want detailed information. If no profiles are specified, this subcommand lists summary information for all profiles.
sscs list -a array00 profile MyProfile
(summary of all profiles when no <profile-name> value is specified)
Profile: profile-name ... Profile: profile-name
(detail of a profile when a <profile-name> value is specified)
Profile: profile-name Profile in Use: yes | no Factory Profile: yes | no Description: profile-description RAID Level: 0 | 1 | 3 | 5 | 6 Segment Size: 8 KB | 16 KB | 32 KB | 64KB | 256KB Read Ahead: on | off Optimal Number of Drives: variable | 2..30 Disk Type: ANY | FC | SATA | SAS | SSD Pool: pool-name .... Pool: pool-name
Lists replication set information.
list -a <array-name> repset [repset-name[,repset-name...]]
Lists replication set information.
-a,--array <array-name>
Specifies the array from which you want to obtain replication set information. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
repset [repset-name[,repset-name...]]
Specifies the replication set or sets. If you do not specify a replication set, then a summary of all the replication sets on the array is listed.
sscs list -a corporate repset
Lists all of the repsets on the array named corporate.
sscs list -a corporate repset mail/1
Lists the details of the replication set mail/1 on the array named corporate.
(summary of all replication sets when no replication set name is specified)
Replication set: local-volume-name/1 Consistency Group: yes | no Remote volume: remote-vol Replication Peer: replication-peer-name ... Replication set: local-volume-name/1 Consistency Group: yes | no Remote volume: remote-vol Replication Peer: replication-peer-name
(details when a replication set name is specified)
Replication set: repset-name Local volume: volume-name Synchronization progress: Replicating | Unsynchronized | Synchronization in progress | Suspended | Failed | Not Ready | Failed Suspended Role: Primary | Secondary Size: size-in-megabytes Replication Peer: remote-array-name Replication Peer WWN: remote-array-WWN Remote Volume: remote-volume-name Remote Volume WWN: remote-volume-WWN Mode: Synchronous | Asynchronous Consistency group: yes | no Replication priority: lowest | low | medium | high | highest Auto synchronize: Enabled | Disabled
list -a <array-name> [-c <A|B>] sasport [sasport-id[,sasport-id...]]
Lists pertinent SAS port information.
-a,--array <array-name>
Specifies the array for which you want to obtain SAS port information.
-c,--controller <A|B>
Specifies the controller for which you want to view SAS port information. If no controller is specified, summary information for both controllers is displayed.
sasport [sasport-id[,sasport-id...]]
Specifies the SAS port or ports for which you want information. Ports are specified as A/1 to A/4 and B/1 to B/4. If no SAS port is specified, details for all ports are displayed.
sscs list -a Quartz sasport Array: Quartz Controller: B SAS Port: B/1 Port WWN: 50:0A:0B:81:D2:BA:60:04 Speed: 1 Gb/s Maximum Speed: 7 Gb/s Channel Number: 1 Link Status: Up Array: Quartz Controller: B SAS Port: B/2 Port WWN: 50:0A:0B:81:D2:BA:60:0C Speed: 1 Gb/s Maximum Speed: 7 Gb/s Channel Number: 2 Link Status: Up Array: Quartz Controller: B SAS Port: B/3 Port WWN: 50:0A:0B:81:D2:BA:60:08 Speed: 1 Gb/s Maximum Speed: 7 Gb/s Channel Number: 3 Link Status: Up Array: Quartz Controller: A SAS Port: A/1 Port WWN: 50:0A:0B:81:D2:BB:10:04 Speed: 1 Gb/s Maximum Speed: 7 Gb/s Channel Number: 1 Link Status: Up Array: Quartz Controller: A SAS Port: A/2 Port WWN: 50:0A:0B:81:D2:BB:10:0C Speed: 1 Gb/s Maximum Speed: 7 Gb/s Channel Number: 2 Link Status: Up Array: Quartz Controller: A SAS Port: A/3 Port WWN: 50:0A:0B:81:D2:BB:10:08 Speed: 1 Gb/s Maximum Speed: 7 Gb/s Channel Number: 3 Link Status: Up
Lists the specified snapshot or snapshots associated with this array.
list -a <array-name> snapshot [snapshot-name[,snapshot-name...]]
Lists the specified snapshot or snapshots associated with this array.
-a,--array <array-name>
Specifies the array associated with this snapshot.
snapshot [snapshot-name[,snapshot-name...]]
Specifies the snapshot or snapshots you want to view. If you do not specify a snapshot, the names of all the snapshots in the array are listed.
sscs list -a array00 snapshot snap1
(when no <snapshot-name> value is specified)
Snapshot: snapshot-name ... Snapshot: snapshot-name
(detailed output if one or more <snapshot-name> values are specified)
Volume: snapshot-volume-name Type: snapshot WWN: WWN Virtual Disk: virtual-disk-name-of-parent-volume Size: size-of-parent MB State: state Status: status Action: action Condition: Optimal | Degraded | Failed | Impaired Controller: A | B Preferred Controller: A | B Modification Priority: lowest | low | medium | high | highest Write Cache: Enabled | Disabled Write Cache With Replication: Enabled | Disabled Write Cache Without Batteries: Enabled | Disabled Flush Cache After: time Disk Scrubbing: Enabled | Disabled Disk Scrubbing With Redundancy: Enabled | Disabled Percent Full: 0..100% Failure Policy: failbasewrite | failsnapshot Warning Threshold: 0..100 Creation Date: date Base Volume: base-volume-name Reserve Volume: reserve-volume-name Reserve Status: online | offline Reserve Size: n Rollback Status: rollback-status Rollback Percent Completion: percent-completion Rollback Time to Completion: time-to-completion
Pools and profiles may be empty, and represented by the symbol '-' (dash).
For a standard volume, this indicates that the current configuration for the volume does not fall into any pool’s defined parameters. For snapshot volumes these values will always be empty.
Lists information about one or more storage trays in the array.
list -a <array-name> tray [tray-name[,tray-name...]]
Lists information about one or more storage trays in the array.
-a,--array <array-name>
Specifies the array associated with this tray.
tray [tray-name[,tray-name...]]
Specifies the tray ID or tray IDs you want to display. If no tray ID is specified, then the names of all the trays in the array are listed.
sscs list -a array01 tray 1
(summary of all trays when no <tray-ID> value is specified)
Tray: tray-ID .... Tray: tray-ID
(detail of a tray when a <tray-ID> value is specified)
Tray: tray-ID Array Type: 6140 Role: Drive Module | Controller Module | Unknown State: Enabled | Disabled Status: OK | ID mismatch | ID conflict | ESM firmware mismatch ESM miswire | minihub speed mismatch | unsupported Disk Type: FC | SATA | SAS | SSD Number of Disks: n
Lists virtual disk (vdisk) or virtual disks information associated with this array.
list -a <array-name> vdisk [virtual-disk-name[,virtual-disk-name...]]
Lists virtual disk (vdisk) or virtual disks information associated with this array.
-a,--array <array-name>
Specifies the array or arrays associated with this virtual disk.
vdisk [virtual-disk-name[,virtual-disk-name...]]
Specifies the virtual disk or disks you want to show. If no virtual disk names are specified, all virtual disk names are listed.
sscs list -a array01 vdisk 1
Response Format (summary of all vdisks when no <virtual-disk-name> value is specified)
Response Format (detail of a vdisk when a <virtual-disk-name> value is specified)
Virtual Disk: virtual-disk-name
Status: Optimal | Degraded | Failed | Impaired
State: State (Ready, Degraded, etc.)
Number of Disks: number-of-disks
Disk Type: FC | SATA | SAS | SSD
list -a <array-name> [-p <pool-name>] [-v <virtual-disk-name>] volume [volume-name[,volume-name...]]
-a,--array <array-name>
Specifies the array associated with this volume. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-p,--pool <pool-name>
Specifies the pool name associated with this volume. If a pool is specified, all volumes in that pool are listed.
-v,--vdisk <virtual-disk-name>
Specifies the virtual-disk associated with this volume.
volume [volume-name[,volume-name...]]
Specifies the volume name or names associated with this array. If no volumes are specified, a summary of all volumes is listed. Use pool and virtual-disk to display listed volumes.
sscs list -a array01 -p pool1 volume ORACLE-1
Response Format (summary of all volumes when no <volume-name> value is specified)
Volume: volume-name Type: type Pool: pool-name Profile profile-name
Volume: volume-name Type: type Pool: pool-name Profile profile-name
Response Format (detailed output if specified volume is a standard, source, or target volume)
Type: Standard | Source | Target | Replicated
Virtual Disk: virtual-disk-name
Condition: Optimal | Degraded | Failed | Impaired
Modification Priority: Lowest | Low | Medium | High | Highest
Write Cache: Enabled | Disabled
Write Cache With Replication: Enabled | Disabled
Write Cache Without Batteries: Enabled | Disabled
Disk Scrubbing: Enabled | Disabled
Disk Scrubbing With Redundancy: Enabled | Disabled
Snapshot: snapshot-name Creation Time: time Reserve: reserve
Snapshot: snapshot-name Creation Time: time Reserve: reserve
Host: host-name LUN: LUN-ID Initiator: initiator WWN: WWN Permission: permission
Host Group: hostgroup-name LUN: LUN-ID Initiator: initiator WWN: WWN Permission: permission
Pools and profiles can be empty, in which case they are represented by the symbol '-' (dash).
For a standard volume, this indicates that the current configuration for the volume does not fall into any pool’s defined parameters.
Lists volume-copy information.
list -a <array-name> [-s <volume-name[,volume-name...]>] [-t <volume-name[,volume-name...]>] volume-copy
Lists volume copy information. If neither the source volume nor the target volume is specified, a summary of all volume copies is listed. If the source volume or the target volume is specified, a detailed listing of each is generated.
-a,--array <array-name>
Specifies the array associated with the volumes that you want to list.
-s,--source-volume <volume-name[,volume-name...]>
Specifies the source volume or volumes that you want to list.
-t,--target-volume <volume-name[,volume-name...]>
Specifies the target volume or volumes that you want to list.
sscs list -a array00 -s vol1,vol3 volume-copy
(summary of all volume copies when no volume copy name is specified)
Source Volume: source-volume-name Target Volume: target-volume-name ... Source Volume: source-volume-name Target Volume: target-volume-name
(detailed output if a <volume-copy> value is specified)
Volume Copy: Source Volume: source-volume-name Target Volume: target-volume-name Target Read Only: Enabled | Disabled Status: In Progress | Completed | Stopped Percent Complete: 0...100 Priority: lowest | low | medium | high | highest Copy Start Timestamp: timestamp Copy Completion Timestamp: timestamp
Maps one or more volumes to a host.
map -a <array-name> -s <snapshot-name[,snapshot-name...]> [-l <0..255>] host <host-name> map -a <array-name> -v <volume-name[,volume-name...]> [-l <0..255>] host <host-name>
Maps one or more volumes and snapshots to a host. Any previous mappings for the given volumes and snapshots are removed.
-a,--array <array-name>
Specifies the array associated with this host. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-l,--lun-id <0..255>
Specifies a logical unit number (LUN). A LUN can be specified only when mapping a single volume. If no LUN is specified, as many successive unused LUNs as needed are used, starting with the first available LUN. You can have up to 256 LUNs per host or hostgroup.
-s,--snapshot <snapshot-name[,snapshot-name...]>
Specifies the snapshot volume name or names associated with this host.
-v,--volume <volume-name[,volume-name...]>
Specifies the volume associated with this host.
host <host-name>
Specifies the host that you want to map to the volume.
sscs map -a array00 -v vol01,vol02 host host01
Maps one or more volumes to a host group.
map -a <array-name> [-s <snapshot-name[,snapshot-name...]>] [-v <volume-name[,volume-name...]>] [-l <0..255>] hostgroup <hostgroup-name>
Maps one or more volumes and snapshots to a host group. Any previous mappings for the given volumes or snapshots are removed.
-a,--array <array-name>
Specifies the array associated with this host group.
-v,--volume <volume-name[,volume-name...]>
Specifies the volumes to be mapped to this host group.
-s,--snapshot <snapshot-name[,snapshot-name...]>
Specifies the snapshot volumes to be mapped to this host group.
-l,--lun-id <0..255>
Specifies the LUN ID of the initiator that you want to map to this host group. A LUN can be specified only when mapping a single volume. If no LUN is specified, as many successive unused LUNs as necessary are used, starting with the first available unused LUN. You can have up to 256 LUNs per host or hostgroup.
hostgroup <hostgroup-name>
Specifies the host group name.
sscs map -a array00 -v vol01,vol02 hostgroup hg01
Maps one or more initiators to a volume or snapshot.
map -a <array-name> [-v <volume-name[,volume-name...]>] [-s <snapshot-name[,snapshot-name...]>] [-l <0..255>] initiator <initiator-name>
Maps an initiator to a volume or snapshot. Any previous mappings for the given volumes or snapshots are removed.
-a,--array <array-name>
Specifies the array associated with the initiator. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-l,--lun-id <0..255>
Specifies the logical unit number of this initiator. A LUN can be specified only when mapping a single initiator. If no LUN is specified, the first available LUN is used. You can have up to 256 LUNs per host or hostgroup.
-s,--snapshot <snapshot-name[,snapshot-name...]>
Specifies the snapshot volumes to be mapped to this initiator.
-v,--volume <volume-name[,volume-name...]>
Specifies the volumes to be mapped to this initiator.
initiator <initiator-name>
Specifies the initiator name to which the array is being mapped. If no volume or snapshot is specified, the initiator is mapped into the default partition.
sscs map -a array00 -v v01 initiator init01
Maps one or more snapshots to a host or host group.
map -a <array-name> [-i <initiator-name>] [-h <host-name>] [-g <hostgroup-name>] [-l <0..255>] snapshot <snapshot-name[,snapshot-name...]>
Maps one or more snapshots to a host or host group. If no host or host group is specified, the snapshot or snapshots are mapped into the Default partition.
-a,--array <array-name>
Specifies the array associated with this snapshot. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-g,--hostgroup <hostgroup-name>
Specifies the host group that you want to map to the snapshots.
-h,--hostname <host-name>
Specifies the host that you want to map to the snapshot.
-i,--initiator <initiator-name>
Specifies the initiator that you want to map to the snapshot.
-l,--lun-id <0..255>
Specifies the logical unit number of this initiator. A LUN can be specified only when mapping a single volume. If no LUN is specified, the first available LUN is used. You can have up to 256 LUNs per host or hostgroup.
snapshot <snapshot-name[,snapshot-name...]>
Specifies the name or names of the snapshot you want to map. Any previous mappings for the snapshots will be removed.
sscs map -a array00 -g hg01 snapshot snap1, snap2
Maps one or more volumes to a host or host group.
map -a <array-name> [-i <host-name>] [-h <host-name>] [-g <hostgroup-name>] [-l <0..255>] volume <volume-name[,volume-name...]>
Maps one or more volumes to a host or host group. Any previous mappings for the given volume or volumes are removed.
-a,--array <array-name>
Specifies the array associated with this volume. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-g,--hostgroup <hostgroup-name>
Specifies the host group name associated with this volume.
-h,--host <host-name>
Specifies the host that you want to map to the volume.
-i,--initiator <host-name>
Specifies the initiator that you want to map to the volume.
-l,--lun-id <0..255>
Specifies the logical unit number of this initiator. A LUN can be specified only when mapping a single volume. If no LUN is specified, the first available LUN is used. You can have up to 256 LUNs per host or hostgroup.
volume <volume-name[,volume-name...]>
Specifies the volume name to which the array is being mapped.
If no host or host group is specified, the volume or volumes are mapped into the default partition.
sscs map -a array00 -g hg01 volume vol01,vol02
Modifies the configuration of the specified array.
modify -N <array-name> array <array-id> modify [-o <string>] [-s <0..100>] [-S <0..100>] [-k <disable|1..30>] [-f <0..60>] [-h <0..max-supported>] [-T <wwn|array_name>] [-b <4K|8K|16K|32K>] [-N <array-name>] [-p] array <array-id> modify -R [-T <wwn|array_name>] array <array-id> modify -c <HHMM|mmddHHMM|mmddHHMM.SS|mmddHHMMyy|mmddHHMMccyy|mmddHHMMccyy.SS> array <array-id> modify [-L [prefix]] array <array-id>
Modifies the configuration of the specified array.
-b,--cache-block-size <4K|8K|16K|32K>
Specifies the cache block size.
-c,--learn-cycle <HHMM|mmddHHMM|mmddHHMM.SS|mmddHHMMyy|mmddHHMMccyy|mmddHHMMccyy.SS>
Specifies when the next array battery learn cycle will occur:
mmdd
Specifies the month and day. For example, 0331 is March 31.
HHMM
Specifies the hour and minute. The hour is based on a 24-hour clock. For example, 1:30 p.m. is 1330.
cc
Specifies the century part of the year.
yy
.SS
Specifies the seconds of the hour.
During a learn cycle, the battery is discharged and recharged so the controller can determine the current battery capacity. The default learn cycle interval for StorageTek 2500 series arrays is 13 weeks. The default learn cycle interval for Sun Storage 2500-M2, 6180, 6580, and 6780 arrays is 8 weeks.
-f,--failover-alert <0..60>
Specifies the number of minutes that the management software is to wait after an alert before enacting failover procedures.
-h,--hot-spare <0..max-supported>
Specifies the hot-spare count for the array. When a hot-spare drive count is specified, an algorithm distributes hot-spare drives across the trays of the array. To set a specific drive as a hot spare, use the subcommand modify disk. The hot-spare count limit is dependent on the array:
-k,--disk-scrubbing <disable|1..30>
Specifies the period of days after which the system scrubs the disk. Disk scrubbing is disabled by default.
-L,--lock-key [<prefix>]
Specifies for the array to generate a new array lock key using the specified lock key prefix. If no prefix value is specified, the array name is used as the prefix. The command will prompt you for a new pass phrase. To ensure accuracy, you will be prompted to enter the pass phrase twice. If the new pass phrase is accepted, all existing unlocked secure drives on the array will be rekeyed with the new lock key.
-N,--new-name <array-name>
Specifies the new name of the array.
-o,--os-type <string>
Specifies the operating system (OS) type. Use the command sscs list -a <array-name> os-type to view all of the operating systems that are supported by the array. Then, use an applicable OS type value for <string>.
-p,--password <password>
Specifies to update the array password.
-R,--redistribute-volumes
Specifies to redistribute volumes on the specified array naming type.
-s,--cache-start <0..100>
Specifies the percentage of unwritten data in the cache that will trigger a cache flush. The value of --cache-start must be greater than the value for --cache-stop.
-S,--cache-stop <0..100>
Specifies the array cache stop.
-T,--name-type <wwn|array_name>
Specifies the array naming type used for <array-id> when specifying the array to be modified. The default is array_name.
array <array-id>
Specifies the ID of the array to be modified. The ID can be either the array’s name or WWN, as specified for -T,--name-type.
sscs modify -f 30 -T array_name array ARRAY1
Modifies the controller settings.
modify -a <array-name> [-e <1|2>] [-d <on|off>] [-i <ip-address>] [-g <ip-address>] [-m <netMask>] controller <A|B>
Modifies the Ethernet port of a controller using the specified IP parameters.
modify -a <array-name> [-e <1|2>] -d <on|off> controller <A|B>
Modifies the IP parameters of a controller’s Ethernet port using the Dynamic Host Control Protocol (DHCP).
modify -a <array-name> -E controller <A|B>
Verifies the network connectivity between the array controller and the management software.
modify -a <array-name> -e <1|2> [-d <on|off>] [-v <enable|disable>] [-i <ip-address>] [-g <ip-address>] [-m <netMask>] controller <A|B>
Modifies controller IP parameters, including option to enable or disable IPv4.
| Note - Not supported by all array models. |
modify -a <array-name> -e <1|2> [-V <enable|disable>] [-I <v6-ip-address>] [-r <v6-ip-address>] [-S <enable|disable>] [-s <PORT_AUTO_NEGOTIATED|PORT_10MBPS_HALF_DUPLEX|PORT_10MBPS_FULL_DUPLEX|PORT_100MBPS_HALF_DUPLEX|PORT_100MBPS_FULL_DUPLEX|PORT_1000MBPS_FULL_DUPLEX>] controller <A|B>
Modifies controller Ethernet port and IP parameters, including IPv6 options and port speed.
| Note - IPv6 and port speed are not supported by all array models and firmware versions. |
-a,--array <array-name>
Specifies the array associated with this controller.
-d,--dhcp <on|off>
Specifies whether the dynamic host control protocol (DHCP) is active.
-e,--ethernet-port <1|2>
Specifies the Ethernet port number.
-E,--test-communication
Verifies the network connectivity between the array controller and the management software.
-g,--gateway <gateway-address>
Specifies the gateway IP address. IP addresses can be either Domain Name System (DNS) names or dotted decimal addresses.
-i,--ipaddress <IP-address>
Specifies the controller’s IP address. IP addresses can be either Domain Name System (DNS) names or dotted decimal addresses.
-I,--v6-address <v6-ip-address>
| Note - This option cannot be used in conjunction with the -S,--stateless option. |
-m,--netmask <netmask>
Specifies the controller’s network mask.
-r,--router <v6-ip-address>
-s,--speed <PORT_AUTO_NEGOTIATED|PORT_10MBPS_HALF_DUPLEX|PORT_10MBPS_FULL_DUPLEX|PORT_100MBPS_HALF_DUPLEX|PORT_100MBPS_FULL_DUPLEX|PORT_1000MBPS_FULL_DUPLEX>
Specifies the port speed. The port speed option is not supported by all array models.
-S,--stateless <enable|disable>
Specifies to enable or disable the capability of the device to auto-generate its address using portions of the router's subnet and the device's interface identifier.
| Note - This option cannot be used in conjunction with the -I,--v6-address option. The -I option is considered stateful and indicates an exact desired address. |
-V,--ip-v6 <enable|disable>
Enables or disables IPv6. IPv6 is not supported by all array models and firmware versions.
-v,--ip-v4 <enable|disable>
controller <A|B>
Specifies the controller to modify.
sscs modify -a array00 -g 10.0.5.2 controller A sscs modify -a array00 -e 2 -d on controller A sscs modify -a array00 -E controller B
Modifies the date on the array.
modify -a <array-name> [-G <true|false>] [-s] date <HHMM|mmddHHMM|mmddHHMM.SS|mmddHHMMyy|mmddHHMMccyy|mmddHHMMccyy.SS>
Modifies the date on the array, allowing you to set the time on the array, or to synchronize the time with the management host (that is, setting the array's time to the management host's time.)
-a,--array <array-name>
Specifies the array for which you want to specify date information.
-G,--GMT <true|false>
Specifies whether to set Greenwich Mean Time (GMT) to true or false. If GMT is set to true, the date is GMT time. If GMT is set to false, the local time zone on the host system is assumed.
-s,--synchronize
Specifies whether to synchronize the date with the date on the element manager host. If this option is already set, you will not be able to specify a date.
date
mmdd
Specifies the month and day. For example, 0331 is March 31.
HHMM
Specifies the hour and minute. The hour is based on a 24-hour clock. For example, 1:30 p.m. is 1330.
cc
Specifies the century part of the year.
yy
.SS
Specifies the seconds of the hour.
sscs modify -G false date 010112002003.00
Specifies a disk’s role or prepares a secure disk (or disks) for use in non-secure volumes through erasure.
modify -a <array-name> -h <true|false> disk <disk-name[,disk-name...]> modify -a <array-name> -e [-t <tray-name>] disk <disk-name[,disk-name...]>
This command either specifies a disk’s role or prepares a secure disk (or disks) for use in non-secure volumes through erasure.
-a,--array <array-name>
Specifies the array associated with the specified disk(s).
-e,--erase
Specifies to erase all data from specified security-enabled disk(s) not currently used in any volume group. This will prepare the specified disk(s) for use in non-secure volume groups.
|
Caution - This command will destroy all data on the specified disk(s) and is an irreversible operation. |
-h,--hot-spare <true|false>
Specifies whether you want this disk to be a designated hot-spare.
-t,--tray <tray-name>
Specifies the tray name associated with the specified disk(s).
disk <disk-name[,disk-name...]>
Specifies the disk that you want to modify.
sscs modify -a array00 -h true disk t0d01
Modifies the Fibre Channel port settings on the specified array.
modify -a <array-name> [-c <A|B>] -l <0..125|n/a|any> fcport <fcport-id>
Modifies the Fibre Channel port settings on the specified array.
-a,--array <array-name>
Specifies the array associated with this controller.
-c,--controller <A|B>
-l,--loop-id <0..125|n/a|any>
Specifies the preferred loop ID.
fcport <fcport-id>
Specifies the Fibre Channel port number that you want to modify. Ports are specified as A/1 to A/4 and B/1 to B/4. If no FC port is specified, details for all ports are displayed.
sscs modify -a array00 -c B -l 125 fcport 1
modify -a <array-name> [-N <host-name>] [-g <hostgroup-name>] host <host-name>
-a,--array <array-name>
Specifies the array associated with this host. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-N,--new-name <host-name>
Specifies the new name for the host.
-g,--hostgroup <hostgroup-name>
Specifies the host group into which to include this host.
host <host-name>
Specifies the current host name.
sscs modify -a array00 -N host02 host host01
modify -a <array-name> -N <hostgroup-name> hostgroup <hostgroup-name>
-a,--array <array-name>
Specifies the array associated with this host group.
-N,--new-name <hostgroup-name>
Specifies the new name for the host group.
hostgroup <hostgroup-name>
Specifies the current name of the host group that you want to rename.
sscs modify -a array00 -N hg02 hostgroup hg01
modify -a <array-name> [-h <host-name>] [-N <initiator-name>] [-T <iqn|initiator_name>] [-o <string>] [-u <none|CHAP>] initiator <initiator-id>
modify -a <array-name> [-h <host-name>] [-N <initiator-name>] [-T <wwn|initiator_name>] [-o <string>] initiator <initiator-id>
-a,--array-name <array-name>
Specifies the array for which you want to modify the initiator. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-h,--host <host-name>
Specifies the new host to be associated with this initiator.
-N,--new-name <initiator-name>
Specifies the new initiator name.
-T,--name-type <<iqn|initiator_name>|<wwn|initiator_name>>
Specifies the initiator identifier type. For the iSCSI variant, specify iqn for an iSCSI qualified name (IQN) or initiator_name for a named initiator. For the FC variant, specify wwn for a World Wide Name or initiator_name for a named initiator. You can modify the WWN if the initiator is offline only.
-o,--os-type <string>
Specifies the operating system (OS) type. Use the command sscs list -a <array-name> os-type to view all of the operating systems that are supported by the array. Then, use an applicable OS type value for <string>.
-u,--authentication <none|CHAP>
Specifies to use the Challenge Handshake Authentication Protocol (CHAP) authentication method for accessing the target. Values are CHAP or none.
initiator <initiator-id>
Specifies the initiator identifier.
sscs modify -a array00 -N Lexington_01 initiator myInitiator_01
Modifies the settings for iSCSI performance data.
modify -a <array-name> [-S <on|off>] [-p <1|5|15>] [-r <forever|1HR|2HR|4HR|1DAY>] [-b <true|false>] iperformance
Modifies the settings for iSCSI performance data.
-a,--array <array-name>
Specifies the name of the array for which you want to modify.
-S,--status <on|off>
Enables or disables iSCSI performance monitoring.
-p,--poll <1|5|15>
Specifies the poll interval frequency as 1, 5, or 15 minutes.
-r,--retention <forever|1HR|2HR|4HR|1DAY>
Specifies the period of time you want to retain the performance data in cache.
-b,--baseline <true|false>
Sets the baseline time for the iSCSI array. If true, the current array time is used as the baseline time.
sscs modify -a iSCSILCA_2 -S on -p 5 iperformance
modify -a <array-name> [-c <A|B>] [-p <3260|49152..65535>] [-m <1500..9000>] [-P <enable|disable>] [-d <on|off>] [-i <ip-address>] [-g <ip-address>] [-n <netMask>] [-v <enable|disable>] [-V <0..4096>] [-e <enable|disable>] [-E <0..7>] iscsi-port <iscsi-port-id> modify -a <array-name> [-c <A|B>] [-p <3260|49152..65535>] [-m <1500..9000>] [-P <enable|disable>] [-i6 <enable|disable>] [-I <v6-ip-address>] [-r <router ip Address>] [-r1 <routable ip address #1>] [-r2 <routable ip address #2>] [-S <enable|disable>] [-v6 <enable|disable>] [-V6 <0..4096>] [-e6 <enable|disable>] [-E6 <0..7>] iscsi-port <iscsi-port-id>
Modifies an iSCSI port configured for a specified array.
a,--array <array-name>
Specifies the array for which you want to modify the iSCSI port.
-c,--controller <A|B>
-d,--dhcp <on|off>
-E,--ethernet-priority-value <0..7>
Specifies the ethernet priority value.
-e,--ethernet-priority <enable|disable>
Enables or disables the ethernet priority.
-E6,--ipv6-ethernet-priority-value <0..7>
Specifies the IPv6 ethernet priority value.
-e6,--ipv6-ethernet-priority <enable|disable>
Specifies to enable or disable IPv6 ethernet priority.
-g,--gateway <ip-address>
Specifies the IP address gateway.
-i,--ipaddress <ip-address>
-i6,--ip-v6 <enable|disable>
Specifies to enable or disable IPv6.
-I,--ipv6-address <v6-ip-address>
-m,--max-trans-unit <1500..9000>
-n,-netmask <netMask>
-P,--icmp-ping <enable|disable>
Enables or disables the ICMP ping feature.
-p,--port <3260|49152..65535>
Specifies the default port number, 3260, or a port number from 49152 to 65535.
-r,--router <router ip Address>
Specifies the router IP address.
-r1,--routable-ipaddress1 <routable ip address #1>
Specifies the routable IP address #1.
-r2,--routable-ipaddress2 <routable ip address #2>
Specifies the routable IP address #2.
-S,--stateless <enable|disable>
Specifies to enable or disable the capability of the device to auto-generate its address using portions of the router's subnet and the device's interface identifier. NOTE: This option cannot be used in conjunction with the -I,--ipv6-address option. The -I option is considered stateful and indicates an exact desired address.
-v,--VLAN <enable|disable>
Enables or disables the VLAN feature.
-V,--VLAN-id <0..4096>
-v6,--ipv6-VLAN <enable|disable>
Specifies to enable or disable the IPv6 VLAN feature.
-V6,--ipv6-VLAN-id <0..4096>
iscsi-port <iscsi-port-id>
modify -a <array-name> [-A <alias-name>] iscsi-target <target-name> modify -a <array-name> -p <3205|49152...65535> iscsi-target <target-name> modify -a <array-name> -u <none|CHAP|BOTH> iscsi-target <target-name> modify -a <array-name> -n <enable|disable> iscsi-target <target-name> modify -a <array-name> -i <enable|disable> -d <on|off> [-q <string>] [-p <3205|49152..65535>] iscsi-target <target-name> modify -a <array-name> -i <enable|disable> -s <enable|disable> [-h <string>] [-p <3205|49152..65535>] iscsi-target <target-name>
Modifies an iSCSI target configured for a specified array.
-a,--array <array-name>
Specifies the array for which you want to modify the iSCSI target.
-A,--alias <alias-name>
An alias defined for the array.
-p,--port <3205|49152..65535>
Specifies the default port number, 3205, or a port number from 49152 to 65535.
-u,--authentication <none|CHAP|BOTH>
Specifies authentication as none, CHAP, or both.
-n,--unnamed-discovery <enable|disable>
Specifies to enable or disable unnamed discovery.
-s,--stateless <enable|disable>
Specifies to enable or disable the capability of the device to auto-generate its address using portions of the router's subnet and the device's interface identifier.
| Note - This option cannot be used in conjunction with the -h,--ip-v6-address option. The -h option is considered stateful and indicates an exact desired address. |
-h,--ip-v6-address <string>
| Note - This option cannot be used in conjunction with the -s,--stateless option. |
-i,--isns <enable|disable>
Specifies to enable or disable iSNS.
-d,--dhcp <on|off>
Specifies to set DHCP to on or off.
-q,--ip-address <string>
Specifies to set the IP address to IPv4.
iscsi-target <target-name>
Specifies the iSCSI qualified target name. For example: iqn.1992-01.com.sun:1535.600a0b80002f9da000000000461255f9
sscs modify --alias fred iscsi-target iqn.199201.com.sun:1535.600a0b80002f9da000000000461255f9
Cancels or prioritizes a running or outstanding job.
modify -a <array-name> [-k] [-p <lowest|low|medium|high|highest>] jobs <job-ID>
Cancels or prioritizes a running or outstanding job using the job identification number.
-a,--array <array-name>
Specifies the array for which you want to modify the job or jobs.
-k,--kill
Cancels a running or outstanding job or jobs.
-p,--priority <lowest|low|medium|high|highest>
Specifies an order of priority from which to determine the action of the modification.
jobs <job-id>
Specifies the job to be cancelled or prioritized.
sscs modify -p low jobs VOL:00C1408F84C2
Activates replication set licenses (not applicable to all firmware versions).
modify -a <array-name> -A [-v <virtual-disk-name>] license ReplicationSet
Activates replication set licenses on the specified array using the designated virtual disk for replication set repository volumes. If the virtual disk is omitted, the manager chooses an appropriate virtual disk to create the repository volumes.
modify -a <array-name> -A -r 1 -n <1..224> [-k <ANY|FC|SAS|SATA|SSD>] license ReplicationSet modify -a <array-name> -A -r <3|5|6> -n <1..30> [-k <ANY|FC|SAS|SATA|SSD>] license ReplicationSet modify -a <array-name> -A -r <1|3|5> -n <1..30> [-k <ANY|FC|SAS|SATA|SSD>] license ReplicationSet
Activates replication set licenses on the specified array, creating a new virtual disk with the designated RAID level and disk type for the replication set repository volumes.
modify -a <array-name> -A -r <1|3|5|6> -d <disk-name[,disk-name...]> license ReplicationSet modify -a <array-name> -A -r <1|3|5> -d <disk-name[,disk-name...]> license ReplicationSet
Activates replication set licenses on the specified array, creating a new virtual disk with the designated RAID level and names of disks to be used for the replication set repository volumes.
modify -a <array-name> -I license ReplicationSet
Deactivates replication set licenses on the specified array and deletes the replication set repository volumes.
Activates replication set licenses (not applicable to all firmware versions).
-a,--array <array-name>
Specifies the array for which you want to activate or deactivate a replication set license. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-A,--activate
Activates a replication set license.
-I (that is, uppercase letter “i”),--deactivate
Deactivates a replication set license.
-v,--virtual-disk <virtual-disk-name>
Specifies the virtual disk that you want to select.
-r,--raid-level <1>|<3|5|6>|<1|3|5>
Specifies the RAID level in accordance with number of disks.
-n,--number-of-disks <1..224>|<1..30>
Specifies the number of disks in accordance with the RAID level.
-k,--disk-type <ANY|FC|SAS|SATA|SSD>
SATA - Serial Advanced Technology Attachment
-d,--disk <disk-name>
license
Specifies that you want to modify a license.
ReplicationSet
Specifies the license that you want to modify.
sscs modify -a europe -A -v 3 license ReplicationSet
Activates replication set licenses on the array named europe using existing virtual disk 3 for the replication set repository volumes.
sscs modify -a corporate -A -r 3 -n 3 -D FC license ReplicationSet
Activates replication set licenses on the array named corporate, creating a new virtual disk of RAID level 3 with 3 Fibre Channel disks for the replication set repository volumes.
sscs modify -a corporate -A -r 1 -d t1d01,t2d02 license ReplicationSet
Activates replication set licenses on the corporate array, creating a new virtual disk of RAID level 1 with 2 specific disks for the replication set repository volumes.
sscs modify -a europe -I license ReplicationSet
Deactivates replication set licenses on the europe array. The replication set repository volumes will be deleted.
Modifies notification options.
modify -d notification <local_email|trap> modify -e notification <local_email|trap> modify -p <string>] [-i <string>] [-k <true|false>] [-f <string>] [-u <string>] [-q] [-z <2|4|6|8|10|15|20|30|40|50>] [-o <integer>] notification <local_email>
| Note - trap is not a valid option for the above command variant. |
modify -m <string> -r <string> notification <local_email|trap>
Modifies notification options.
-d,--disable
-e,--enable
-f,--from <string>
Specifies the origin of the notification message.
-i,--ip <string>
Specifies the IP address of the device.
-k,--secure <true | false>
Specifies whether security is used.
-m,--test-message <string>
Specifies to send test message.
-o,--port <integer>
-p,--path <string>
-q,--query-for-password
Queries for the current password for the registered array.
-r,--test-address <string>
Specifies address where test message will be sent.
-u,--user <string>
Specifies the user for which notification will be modified.
-z,--max-size <2 | 4 | 6 | 8 | 10 | 15 | 20 | 30 | 40 | 50>
Specifies the maximum size of the notification message.
notification <local_email | trap> local-email
Specifies your local email address at which you want to modify the notification.
trap
Specifies the SNMP trap notification method to use to receive the notification.
Modifies settings for performance monitoring.
modify -a <array-name> [ -S on | off ] [ -p 1 | 5 | 15 ] [ -r forever | 1HR | 2HR | 4HR | 1DAY ] performance
Modifies settings for performance monitoring. To reset performance settings, toggle the status to off and back on again.
Specifies the array for which you want to modify the performance.
Enables or disables performance monitoring.
Specifies the poll interval frequency in minutes. The default is 15.
-r,--retention forever | 1HR | 2HR | 4HR | 1DAY
Specifies the amount of time to retain data in cache. The default data retention period is 1 hour.
sscs modify -a array00 -S on -p 5 performance
Modifies the name or description of the storage pool or the profile with which this pool is associated.
modify -a <array-name> [ -N <new-pool-name> ] [ -d <description> ] [ -p <new-profile-name> ] pool <pool-name>
Modifies the name or description of the storage pool or the profile with which this pool is associated.
You can change the segment size of a volume by a factor of 2 only. For example, a volume with segment size of 32K can only be changed to a segment size of 64K or 16K. To change the segment size to 256K, the volume would first need to be changed to 64K, then 128K, then 256K. Any changes made to the profile of a pool must maintain this segment size restriction for all affected volumes.
-a,--array <array-name>
Specifies the name of the array to associate with this pool. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-N,--new-name <new-pool-name>
Specifies a new name for this pool.
-d,--description <description>
Specifies a description of the pool. The description can be up to 256 alphanumeric characters, which can include underscores, dashes, colons, commas, parentheses, curly brackets, square brackets, ticks, tildes, bars, periods, or spaces.
-p,--profile <profile-name>
Specifies the name of the profile to associate with this pool.
pool <pool-name>
Specifies the pool that you want to modify.
sscs modify -a array00 -d Lexington_01 pool SP048763
Modifies a storage profile on the array.
modify -a <array-name> [-r <0|1>] [-s <8K|16K|32K|64K|128K|256K|512K>] [-N <new-profile-name>] [-d <profile-description>] [-h <on|off>] [-n <variable|1..224>] [-H <yes|no>] [-k <ANY|FC|SAS|SATA|SSD>] profile <profile-name> modify -a <array-name> [-r <3|5|6>] [-s <8K|16K|32K|64K|128K|256K|512K>] [-N <new-profile-name>] [-d <profile-description>] [-h <on|off>] [-n <variable|1..30>] [-H <yes|no>] [-k <ANY|FC|SAS|SATA|SSD>] profile <profile-name> modify -a <array-name> [-r <0|1|3|5>] [-s <8K|16K|32K|64K|128K|256K|512K>] [-N <new-profile-name>] [-d <profile-description>] [-h <on|off>] [-n <variable|1..30>] [-H <yes|no>] [-k <ANY|FC|SAS|SATA|SSD>] profile <profile-name>
Modifies a storage profile on the array. You cannot modify a profile that is in use and is associated with a storage pool.
-a,--array <array-name>
Specifies the name of the array to associate with this profile.
-r,--raid-level <0|1>|<3|5|6>|<0|1|3|5>
Specifies the RAID level, in accordance with number of disks.
-s,--segsize <8K|16K|32K|64K|128K|256K|512K>
-N,--new-name <new-profile-name>
Specifies a new name for the profile.
-d,--description <profile-description>
Specifies a profile description. The description can be up to 256 alphanumeric characters, which can include underscores, dashes, colons, commas, parentheses, curly brackets, square brackets, ticks, tildes, bars, periods, or spaces. Enclosing the description in quotation marks retains it exactly as you want it.
-h,--readahead <on|off>
Specifies if the readahead setting is on or off.
-n,--number-of-disks <variable|1..30>|<variable|1..224>
Specifies the number of disks, in accordance with the RAID level.
-H,--dedicated-hot-spare <yes|no>
Specifies whether you want this disk to be a designated hot-spare.
-k,--disk-type <ANY|FC|SAS|SATA|SSD>
SATA - Serial Advanced Technology Attachment
profile <profile-name>
Specifies the name of the profile to be modified.
sscs modify -d “my profile description” profile random_5
Change the locally stored password for a registered array.
modify -a <array-name> -q registeredarray
Modifies the locally stored password for a registered array.
-a,--array <array-name>
Specifies the name of the array.
-q,--query-for-password
Specifies to query for the current registered array password to update the management software’s registration database.
sscs modify -a array00 -q registeredarray Enter the array password: Confirm password:
Modifies the mode, consistency group, or replication priority of the specified replication set.
modify -a <array-name> [ -m sync | async ] [ -G yes | no ] [ -R lowest | low | medium | high | highest ] [ -s enable | disable ] repset <repset-name>
Modifies the role, mode, consistency group, or replication priority of the specified replication set.
modify -a <array-name> [ -r primary | secondary ] [ -f ] repset <repset-name>
Changes the role of the local volume on the specified array.
modify -a <array-name> -c repset <repset-name>
Suspends replication on the specified array.
modify -a <array-name> -z repset <repset-name>
Resumes replication on the specified array.
modify -a <array-name> -E repset <repset-name>
Tests to determine if the primary volume on the specified array is communicating correctly with its replica (primary or secondary).
-a,--array <array-name>
Specifies the array for which you want to activate or deactivate a replication set license. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-m,--mode sync | async
Specifies whether the mode is synchronous or asynchronous.
-G,--consistency-group yes | no
Specifies whether or not the replication set is part of a consistency group.
-R,--replication-priority lowest | low | medium | high | highest
Specifies the priority level for this replication set.
-s,--auto-sync enable | disable
Specifies whether or not the auto synchronization policy is enabled. If it is not specified, the default is disable.
-r,--role primary | secondary
Specifies whether the role is primary or secondary.
-f,--force
If specified, it works with the -r option to reverse roles. If communication with the replication peer is not functioning, the role change is still forced on the local volume.
-c,--suspend
Suspends temporarily the replication activity. If the replication set is part of a replication consistency group, then all of the replication sets in that group are suspended.
-z,--resume
Resumes replicating a replication set that has been suspended, or starts replicating a replication set. If the replication set is part of a replication consistency group, then it sets all of the replication sets in that group to synchronize.
-E,--test-communication
Tests communications to a replication set.
sscs modify -a corporate -r secondary repset oracle/1
Changes the role of the local volume on the oracle/1 repset to secondary on the array named corporate.
sscs modify -a corp_west -r primary -f repset mail/1
Forces the role of the local volume on the mail/1 repset to primary on the sample corp_west array, even if communications cannot be established with the current primary.
sscs modify -a corporate -c repset sap_central/1
Suspends replication on the sap_central/1 repset on the corporate array.
sscs modify -a corporate -z repset sap_central/1
Resumes replication on the sap_central/1 repset on the corporate array.
sscs modify -a corporate -E repset finance/1
Tests to determine if the primary volume finance on the corporate array is communicating correctly with its replica (primary or secondary).
Modifies the specified snapshot.
modify -a <array-name> [-N <snapshot-name>] [-f <failbasewrite|failsnapshot>] [-w <0..100>] snapshot <snapshot-name>
Modifies properties of the snapshot.
modify -a <array-name> -e <number<TB|GB|MB|KB|Bytes|BLK>> snapshot <snapshot-name>
Extends the snapshot reserve volume size by a specified amount. This option is mutually exclusive and cannot be used with any other option.
modify -a <array-name> -S snapshot <snapshot-name>
Disables the snapshot. This option is mutually exclusive and cannot be used with any other option.
modify -a <array-name> -R snapshot <snapshot-name>
Resnaps the snapshot. This option is mutually exclusive and cannot be used with any other option.
modify -a <array-name> [-m <volume-name>] [-c <A|B>] [-W <enable|disable>] [-M <enable|disable>] [-b <enable|disable>] [-F <immediate|250ms|500ms|750ms|1s|1500ms|2s|5s|10s|20s|60s|120s|300s|1200s|3600s|infinite>] [-k <enable|disable>] [-r <enable|disable>] snapshot <snapshot-name>
Modifies the volume properties of the snapshot reserve volume.
modify -a <array-name> --rollback <start|resume|cancel> snapshot <snapshot-name>
Starts, resumes, or cancels a snapshot rollback. Starting a rollback operation will generate a job, viewable using the list jobs command. While rollback is in progress, the snapshot is in a read-only state.
Modifies the specified snapshot. The arguments resnap and extend are mutually exclusive.
-a,--array <array-name>
Specifies the array associated with this snapshot. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-b,--write-cache-without-batteries <enable|disable>
Specifies whether write-cache-without-batteries is enabled.
-c,--controller <A|B>
-e,--extend <number<TB|GB|MB|KB|Bytes|BLK>>
Extends the snapshot reserve volume size by a specified amount.
-f,--fail-policy <failbasewrite|failsnapshot>
The fail-policy specifies what to do if and when the snapshot fills up:
Failbasewrite - Stop allowing writes to the base volume.
Failsnapshot - Stop allowing writes to the snapshot. This is the default.
-F,--flush-write-cache-after <immediate|250ms|500ms|750ms|1s|1500ms|2s|5s|10s|20s|60s|120s|300s|1200s|3600s|infinite>
Specifies the period of time after which to flush the write cache.
-k,--disk-scrubbing <enable|disable>
Specifies whether disk scrubbing is enabled.
-m,--reserve-name <reserve-volume-name>
Specifies the name of the reserve volume.
-M,--write-cache-with-replication <enable|disable>
Specifies whether write-cache-with-replication is enabled.
-N,--new-name <new-snapshot-name>
Specifies a new name for the snapshot.
-r,--disk-scrubbing-with-redundancy <enable|disable>
Specifies whether disk scrubbing-with-redundancy is enabled.
--rollback <start|resume|cancel>
Starts, resumes, or cancels a snapshot rollback.
-R,--resnap
-S,--disable
-w,--warning-threshold <0..100>
Specifies when to inform you that the snapshot reserve volume is near capacity. If a warning-threshold is not specified, 50% is the default.
-W,--write-cache <enable|disable>
Specifies whether the write cache is enabled.
snapshot snapshot-name
Specifies the name of the snapshot to modify.
sscs modify -a array00 -V vol0 snapshot vol01_snap sscs modify -a cam-array-1 --rollback start snapshot dbl_snap_1
Modifies information about one or more storage trays in the array.
modify -a <array-name> -N <0..99> tray <tray-name>
Modifies information about one or more storage trays in the array.
-a,--array <array-name>
Specifies the array associated with this tray.
-N,--new-name <0..99>
tray <tray-name>
Specifies the tray ID or tray IDs you want to modify. If no tray ID is specified, then the names of all the trays in the array are listed.
sscs modify -a array00 -n 99 tray 0
Specifies modifications to a virtual disk.
modify -a <array-name> [-N <virtual-disk-name>] [-d <disk-name[,diskname...]>] [-f] [-S] vdisk <virtual-disk-name>
Specifies modifications to a virtual disk.
a,--array <array-name>
Specifies the array that is associated with the virtual disk changes.
-d,--disk <disk-name,...>
Specifies particular disks to be added to the virtual disk.
-f,--defragment
Specifies whether to defragment the virtual disk or virtual disks.
-N,--new-name <virtual-disk-name>
Specifies new virtual disk name.
-S,--secure
Specifies to make the virtual disk secure.
vdisk <virtual-disk-name>
Specifies the virtual disk that you want to modify.
sscs modify -a array00 -d t0d01,t0d02 vdisk vdisk01
Modifies any of a volume’s attributes.
modify -a <array-name> [-p <pool-name>] [-e <number<TB|GB|MB|KB|Bytes|BLK>>] [-N <volume-name>] [-c <A|B>] [-m <lowest|low|medium|high|highest>] [-W <enable|disable>] [-M <enable|disable>] [-b <enable|disable>] [-F <immediate|250ms|500ms|750ms|1s|1500ms|2s|5s|10s|20s|60s|120s|300s|1200s|3600s|infinite>] [-k <enable|disable>] [-r <enable|disable>] [-Z <number<TB|GB|MB|KB|Bytes|BLK>>] [-C <integer>] [-L <low|verylittle|little|average|high|full>] [-l <0..100>] [-f <volume|snapshot>] [-w <0..100>] [-P <pool-name>] [-V <virtual-disk-name>] [-D <description-text>] volume <volume-name> modify -a <array-name> [-p <pool-name>] [-e <number<TB|GB|MB|KB|Bytes|BLK>>] [-N <volume-name>] [-c <A|B>] [-m <lowest|low|medium|high|highest>] [-W <enable|disable>] [-M <enable|disable>] [-b <enable|disable>] [-F <immediate|250ms|500ms|750ms|1s|1500ms|2s|5s|10s|20s|60s|120s|300s|1200s|3600s|infinite>] [-k <enable|disable>] [-r <enable|disable>] [-R <enable|disable>] [-Z <number<TB|GB|MB|KB|Bytes|BLK>>] [-C <integer>] [-L <low|verylittle|little|average|high|full>] [-l <0..100>] [-f <volume|snapshot>] [-w <0..100>] [-P <pool-name>] [-V <virtual-disk-name>] [-D <description-text>] volume <volume-name>
Modifies a volume’s attributes with one or more of the following arguments.
You can change the segment size of a volume by a factor of two only. For example, a volume with segment size of 32K can only be changed to a segment size of 64K or 16K. To change the segment size to 256K, the volume would first need to be changed to 64K, then 128K, then 256K. Any changes made to the profile of a pool must maintain this segment size restriction for all affected volumes.
a,--array <array-name>
Specifies the array whose volume you want to modify. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-b,--write-cache-without-batteries <enable|disable>
Specifies whether write-cache-without-batteries is enabled.
-C,--snapshot-count <integer>
Specifies the number of intended snapshots for the volume.
-c,--controller <A|B>
Changes a volume’s preferred and current controller.
-D,--description <description-text>
Specifies a description of the snapshot.
-e,--extend <number<TB|GB|MB|KB|Bytes|BLK>>
Extends the volume size by a specified amount.
-F,--flush-write-cache-after <immediate|250ms|500ms|750ms|1s|1500ms|2s|5s|10s|20s|60s|120s|300s|1200s|3600s|infinite>
Specifies the period of time after which to flush the write cache.
-f,--favor <volume|snapshot>
Favors the volume or snapshot.
-k,--disk-scrubbing <enable|disable>
Specifies whether disk scrubbing is enabled.
-L,--snapshot-level <low|verylittle|little|average|high|full>
Specifies the level of snapshot activity as either low, verylittle, little, average, high, or full. The snapshot levels equate to the following percentages:
-l,--snapshot-percentage <0..100>
Specifies what percentage of the volume is to be used for snapshot creation.
-m,--modification-priority <lowest|low|medium|high|highest>
Specifies the priority of this modification.
-M,--write-cache-with-replication <enable|disable>
Specifies whether write-cache-with-replication is enabled.
-N,--new-name <new-volume-name>
Specifies a new name for the volume that is being modified.
-P,--snapshot-pool <pool-name>
Specifies the name of the snapshot.
-p,--pool <pool-name>
Specifies the pool in which the volume resides.
-R,--pre-read-redundancy-check <enable|disable>
Specifies whether the pre-read redundancy check is enabled.
-r,--disk-scrubbing-with-redundancy <enable|disable>
Specifies whether disk scrubbing-with-redundancy is enabled.
-V,--reserve-vdisk <virtual-disk-name>
Specifies a reserve virtual disk.
volume <volume-name>
-w,--warning-threshold <0..100>
Specifies when to inform you that the snapshot reserve volume is near capacity. If a warning-threshold is not specified, 50% is the default.
-W,--write-cache <enable|disable>
Specifies whether the write cache is enabled.
-Z,--snapshot-reserve-size <number<TB|GB|MB|KB|Bytes|BLK>>
Specifies the amount of space you want to reserve for capacity of the snapshot reserve volume.
sscs modify -a array01 -p pool1 -e 10GB volume V1
modify -a <array-name> -s [ <source-volume-name> ] -t [ <target-volume-name> ] [ -p lowest|low|medium|high|highest ] [ -r enable | disable ] [ -R ] [ -S ] volume-copy modify -a <array-name> -s <volume-name> -t <volume-name> [-p <lowest|low|medium|high|highest>] [-r <enable|disable>] volume-copy modify -a <array-name> -s <volume-name> -t <volume-name> -R volume-copy modify -a <array-name> -s <volume-name> -t <volume-name> -S volume-copy
-a,--array <array-name>
Specifies the array associated with this volume copy.
-s,--source-volume <source-volume-name>
Specifies the source volume name associated with this volume copy.
-t,--target-volume <target-volume-name>
Specifies the target volume name associated with this volume copy.
-p,--priority lowest | low | medium | high | highest
Specifies the priority level for this volume copy.
-r,--readonly enable | disable
Specifies whether this volume copy is read only or modifiable.
-R,--recopy
Specifies that you want to recopy this volume copy.
-S,--stop
Specifies that you want to stop this volume copy while in progress.
volume-copy <volume-copy-name>
Specifies the name of the volume copy that you want to modify.
sscs modify -a array00 -s vol1 -t vol2 -S volume-copy
offline -a <array-name> vdisk [ <virtual-disk-name> ]
Sets a virtual disk offline. This can create complications. Do not initiate this command without first consulting Sun Customer Service personnel.
| Note - This command does not apply to all arrays or firmware versions. Use the --help command to check proper syntax for your array. For further information on how to use the --help command, see Getting Help with Commands and Their Syntax. |
-a,--array <array-name>
Specifies the array on which you want to set the virtual disk offline.
vdisk
Specifies the name of the virtual disk.
sscs offline -a Array01 vdisk VirtualDisk33
online -a <array-name> vdisk [ <virtual-disk-name> ]
Sets a virtual disk online. This can create complications. Do not initiate this command without first consulting Sun Customer Service personnel.
-a,--array <array-name>
Specifies the array on which you want to set the vdisk online.
vdisk
Specifies the name of the virtual disk.
sscs online -a Array01 vdisk
Initiates a disk reconstruction.
reconstruct -a <array-name> [ -t <tray-name>] disk [ <disk-name> ]
Reconstructs a disk. This can create complications. Do not initiate this command without first consulting Sun Customer Service personnel.
-a,--array <array-name>
Specifies the array on which you want to reconstruct the disk.
-t,--tray <tray-name>
Identifies the tray where the physical disk resides.
disk
Specifies the name of the disk.
sscs reconstruct -a Array01 -t Tray2
Removes one or more hosts from a host group.
remove -a <array-name> -h <host-name,...> hostgroup <host-group-name>
Removes one or more hosts from a host group.
-a,--array <array-name>
Specifies the array associated with this host group.
-h,--host <host-name,...>
Specifies the host or hosts that you want to remove from this host group.
hostgroup <host-group-name>
Specifies the host group from which you want to remove hosts.
sscs remove -a array00 -h host01,host02 hostgroup hg01
Removes the replication set feature license from the specified array.
remove -a <array-name> license <license-name>
Removes the specified feature license from the array.
-a,--array <array-name>
Specifies the array associated with this license.
license <license-name>
Specifies the license that you want to remove from the array. The license name is one of the well-known license names. Use the command sscs list license to see these names.
sscs remove -a corp_west license ReplicationSet
Removes a replication set feature license from the array named corp_west.
|
|
Caution - Resetting the array destroys all user data, including volumes, hosts, initiators, and so forth. |
reset -l <array|volume> array <array-name> reset array <array-name>
-l,--level <array | volume>
Specifies either array or volume to reset. If volume option is used, only volume information is erased, while array configuration is retained.
| Note - This option is only supported by firmware version 07.10.nn.nn and higher. |
Resets the specified controller.
reset -a <array-name> controller A| B reset -a <array-name> controller <controller-name>
Resets the specified controller.
-a,--array <array-name>
Specifies the array whose controller you want to reset.
controller A | B
Specifies the name of the controller to reset, A or B.
controller
Specifies the name of the controller to reset.
sscs reset -a array00 controller A
Resnaps one or more existing snapshots.
resnap -a <array-name> snapshot <snapshot-name[,snapshot-name...]>
Resnaps one or more existing snapshots. When you resnap a group of snapshots, an array job is created.
When resnapping a group of snapshots, if the resnap operation fails for one snapshot, then the entire resnap operation is cancelled.
-a,--array <array-name>
Specifies the array associated with this snapshot.
snapshot <snapshot-name,...>
Specifies the names of the snapshots that you want to resnap.
sscs resnap -a array00 snapshot snapshot1, snapshot2
Resnaps snapshot1 and snapshot2 on array00.
Attempts to bring a disk to the optimal state.
revive -a <array-name> [ -t <tray-id> ] disk [ <disk-name> ]
Attempts to bring a disk to the optimal state. This can create complications. Do not initiate this command without first consulting Sun Customer Service personnel.
-a,--array <array-name>
Specifies the array on which you want to revive the disk.
-t,--tray <tray-ID>
Identifies the tray where the disk resides.
disk
Specifies the name of the disk.
sscs revive -a Array01 -t Tray1 disk Disk7
revive -a <array-name> vdisk [ <virtual-disk-name> ]
Revives a virtual disk. This can create complications. Do not initiate this command without first consulting Sun Customer Service personnel. A virtual disk must be put offline before attempting revival.
| Note - This command does not apply to all arrays or firmware versions. Use the --help command to check proper syntax for your array. For further information on how to use the --help command, see Getting Help with Commands and Their Syntax. |
-a,--array <array-name>
Specifies the array on which you want to revive the virtual disk.
vdisk
Specifies the name of the virtual disk.
sscs revive -a Array01 vdisk VirtualDisk33
Places a field-replaceable unit of an array into a failed state.
service -a <array-name> -t <target-fru-name> fail
Places the specified field-replaceable unit of the array into a failed state.
|
|
Caution - Do not initiate this command without first consulting Sun Customer Service personnel. |
-a,--array <array-name>
Specifies the array to be placed into a failed state.
-t,--target <target-fru-name>
Specifies the name of the field-replaceable unit to be placed into a failed state. This parameter needs to be set to either the FRU name or the FRU ID, both of which can be obtained using variations of the list fru command. See list fru for further details.
service -a myarray -t t0drive12 fail
Redistributes volumes back to their preferred owners.
service -a <array-name> redistribute
Redistributes volumes back to their preferred owners.
-a,--array <array-name>
Specifies the array on which volumes will be redistributed.
service -a Myarray redistribute
Attempts to place the array controller or disk drive into the optimal state. This can create complications. Do not initiate this command without first consulting Sun Customer Service personnel.
service -a <array-name> -t <target-fru-name> [ -w ] revive
Attempts to place the controller or disk drive of the specified array into the optimal state.
-a,--array <array-name>
Specifies the array to be placed into the optimal state.
-t,--target <target-fru-name>
Specifies the name of the field-replaceable unit to be placed into the optimal state. This parameter needs to be set to either the FRU name or the FRU ID, both of which can be obtained using variations of the list fru command. See list fru for further details.
-w,--no warn
sscs service -a myarray -t t0drive12 -w revive
Creates and manages snapshots. This command provides cross-compatibility with scripts that are written for the StorageTek 6920 System. The preferred snapshot commands are Create Snapshot and Modify Snapshot.
snapshoot -a <array-name> -v <source-volume-name> [-C <integer>] [-L <low|verylittle|little|average|high|full>] [-l <0..100>] [-Z <number<TB|GB|MB|KB|Bytes|BLK>>] [-f <volume|snapshot>] [-w <0..100>] [-P <reserve-volume-name>] [-V <virtual-disk-name>] volume <string> snapshoot -a <array-name> -R volume <string> snapshoot -a <array-name> -r volume <string>
Creates and manages snapshots. This command provides cross-compatibility with scripts that are written for the StorageTek 6920 System. The preferred snapshot commands are Create Snapshot and Modify Snapshot.
-a,--array <array-name>
-v,--volume <source-volume-name>
Specifies the volume for which to take a snapshot.
-C,--snapshot-count <integer>
Specifies the number of intended snapshots for the volume.
-l,--snapshot-percentage <0..100>
Specifies what percentage of the volume is to be used for snapshot creation.
-L,--snapshot-level <low|verylittle|little|average|high|full>
Specifies the level of snapshot activity as either low, verylittle, little, average, high, or full. The snapshot levels equate to the following percentages:
-Z,--snapshot-reserve-size <number<TB|GB|MB|KB|Bytes|BLK>>
Specifies the amount of space you want to reserve for capacity of the snapshot reserve volume.
-f,--favor <volume|snapshot>
Favors the volume or snapshot.
-w,--warning-threshold <0..100>
Specifies the threshold, as a percentage, at which the management software will generate messages to indicate the level of space left in the reserve volume. By default, the software generates a warning notification when data in the reserve volume reaches 50 percent of the available capacity. Possible values for the warning threshold are 1 to 100 percent.
-P,--snapshot-pool <reserve-volume-name>
Specifies the name to give to the reserve volume.
-V,--reserve-vdisk <virtual-disk-name>
Specifies the name to give to the reserve virtual disk.
-R,--resnap
-r,--remove-pool
Removes a snapshot from a storage pool.
volume <<snapshot-volume-name>|<new-snapshot-name>>
Specifies the volume or volumes for the snapshot argument. Once the snapshot volume is created, you can treat it the same as any other volume, except that it cannot be used to create another snapshot.
To create a snapshot named vol01 from the source volume vol0, type:
sscs snapshoot -a array01 -v vol0 volume vol01
Unmaps one or more snapshots or volumes from a host.
unmap -a <array-name> [-s <snapshot-name,...> ] [ -v <volume-name,...>] host <host-name>
Unmaps one or more snapshots or volumes from a host.
-a,--array <array-name>
Specifies the array on which this volume resides. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-s,--snapshot <snapshot-name,...>
Specifies the snapshot or snapshots to unmap from the host.
-v,--volume <volume-name,...>
Specifies the volume or volumes to unmap from the host.
host <host-name>
Specifies the host that you want to unmap from the snapshot or volume.
sscs unmap -a array00 -v vol01,vol02 host host01
Unmaps one or more snapshots or volumes from a host group.
unmap -a <array-name> [ -s <snapshot-name,...> ] -v <volume-name,...> hostgroup <host-group-name>
Unmaps one or more snapshots or volumes from a host group.
-a,--array <array-name>
Specifies the array containing the volume that you want to unmap from the host group.
-s,--snapshot <snapshot-name,...>
Specifies the snapshot or snapshots to unmap from the host group.
-v,--volume <volume-name,...>
Specifies the volume or volumes that you want to unmap from the host group.
hostgroup <host-group-name>
Specifies the host group that you want to unmap from the snapshot or volume.
sscs unmap -a array00 -v vol01,vol02 hostgroup hg01
Removes the mapping from one or more initiators to a volume or snapshot.
unmap -a <array-name> [ -s <snapshot-volume-name,...> ] [ -v <volume-name,...> ] initiator <initiator-name,...>
Removes the mapping from an initiator to a snapshot or volume.
-a,--array <array-name>
Specifies the array associated with the volume or snapshot to be unmapped. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-s,--snapshot <snapshot-volume-name,...>
Specifies the snapshot volumes to be unmapped from this initiator.
-v,--volume <volume-name,...>
Specifies the volumes to be unmapped from this initiator.
initiator <initiator-name,...>
Specifies the initiator name to be unmapped.
sscs unmap -a array00 -v vol01 initiator init1
Removes the mapping from one or more snapshots to a host or hostgroup.
unmap -a <array-name> [-i <initiator-name>] [-h <host-name>] [-g <hostgroup-name>] snapshot <snapshot-name[,snapshot-name...]>
Removes the mapping from one or more snapshots to a host or hostgroup.
-a,--array <array-name>
-i,--initiator <initiator-name>
Specifies the initiator that you want to unmap from the snapshot.
-h,--host <host-name>
Specifies the host that you want to unmap from the snapshot.
-g,--hostgroup <hostgroup-name>
Specifies the hostgroup that you want to unmap from the snapshot.
snapshot <snapshot-name[,snapshot-name...]>
Specifies the snapshot or snapshots to be unmapped.
Unmaps one or more volumes from a host or host group.
unmap -a <array-name> [ -h <host-name> | -g <host-group-name> ] volume <volume-name,...> unmap -a <array-name> [-i <initiator-name>] [-h <host-name>] [-g <hostgroup-name>] volume <volume-name[,volume-name...]>
Unmaps one or more volumes from a host or host group.
-a,--array <array-name>
Specifies the array containing the volume that you want to unmap from the host or host group. For cross-platform compatibility, you can substitute -X,--storage-device in place of the -a,--array option.
-i,--initiator <initiator-name>
Specifies the initiator that you want to unmap from the volume.
-h,--host <host-name>
Specifies the host that you want to unmap from the volume.
-g,--hostgroup <host-group-name>
Specifies the host group that you want to unmap from the volume.
volume <volume-name,...>
Specifies the volume or volumes to unmap from the host.
sscs unmap -a array00 -g hg01 volume vol01,vol02
| Sun Storage Common Array Manager CLI Guide, Version 6.9.0 | E24015-01 |
|
Copyright © 2011, Oracle and/or its affiliates. All rights reserved.