SPARC T7 Series Servers Administration Guide

Display Server Components (Oracle ILOM)

The Oracle ILOM show components command displays real-time information about the components installed in the server. This information includes the target name for each component.

• At the Oracle ILOM prompt, type:

  ---

  Note -  This document applies to several server products. The following example is based on the SPARC T7-1 server. Your output might vary from the examples based on your product.

  ---

  -> show components
  Target             | Property              | Value                            
  -------------------+-----------------------+-----------------------------------
  /SYS/MB/CM/CMP     | current_config_state  | Enabled
  /SYS/MB/CM/CMP/    | current_config_state  | Enabled
   BOB01             |                       |
  /SYS/MB/CM/CMP/    | current_config_state  | Enabled
   BOB01/CH0         |                       |
  ...
  /SYS/MB/IOH        | current_config_state  | Enabled
  /SYS/MB/IOH/       | current_config_state  | Enabled
   ILINK0            |                       |
  /SYS/MB/IOH/       | current_config_state  | Enabled
   ILINK1            |                       |
  /SYS/MB/IOH/       | current_config_state  | Enabled
   ILINK2            |                       |
  /SYS/MB/IOH/       | current_config_state  | Enabled
   ILINK3            |                       |
  /SYS/MB/IOH/IOS0   | current_config_state  | Enabled
  /SYS/MB/IOH/IOS1   | current_config_state  | Enabled
  /SYS/MB/IOH/IOS2   | current_config_state  | Enabled
  /SYS/MB/IOH/IOS3   | current_config_state  | Enabled
  /SYS/MB/IOH/IOS4   | current_config_state  | Enabled
  /SYS/MB/PCIE1      | current_config_state  | Enabled
  /SYS/MB/PCIE2      | current_config_state  | Enabled
  /SYS/MB/PCIE3      | current_config_state  | Enabled
  /SYS/MB/PCIE4      | current_config_state  | Enabled
  /SYS/MB/PCIE5      | current_config_state  | Enabled
  /SYS/MB/PCIE6      | current_config_state  | Enabled
  /SYS/MB/SASHBA     | current_config_state  | Enabled
  /SYS/MB/USB_CTRL   | current_config_state  | Enabled
  /SYS/MB/XGBE0      | current_config_state  | Enabled
  /SYS/MB/XGBE1      | current_config_state  | Enabled
  /SYS/RIO/VIDEO     | current_config_state  | Enabled
  
  ->
  

Related Information

• Locate Device Paths (OpenBoot)