SPARC 또는 x86 기반 시스템의 모든 다중 경로 지원 장치에서 다중 경로를 사용 안함으로 설정하려면 다음 단계를 수행하십시오. 특정 FC 또는 SAS HBA 포트에서만 다중 경로를 사용 안함으로 설정하려면 포트별로 다중 경로를 사용 또는 사용 안함으로 설정을 참조하십시오.
# stmsboot -d WARNING: stmsboot operates on each supported multipath-capable controller detected in a host. In your system, these controllers are /devices/pci@780/pci@0/pci@8/SUNW,qlc@0/fp@0,0 /devices/pci@780/pci@0/pci@8/SUNW,qlc@0,1/fp@0,0 /devices/pci@7c0/pci@0/pci@1/pci@0,2/LSILogic,sas@1 /devices/pci@7c0/pci@0/pci@1/pci@0,2/LSILogic,sas@1 /devices/pci@7c0/pci@0/pci@1/pci@0,2/LSILogic,sas@2 /devices/pci@7c0/pci@0/pci@9/LSILogic,sas@0 /devices/pci@7c0/pci@0/pci@9/LSILogic,sas@0 If you do NOT wish to operate on these controllers, please quit stmsboot and re-invoke with -D { fp | mpt } to specify which controllers you wish to modify your multipathing configuration for. Do you wish to continue? [y/n] (default: y) y Checking mpxio status for driver fp Checking mpxio status for driver mpt WARNING: This operation will require a reboot. Do you want to continue ? [y/n] (default: y) y The changes will come into effect after rebooting the system. Reboot the system now ? [y/n] (default: y) y