oracle home
在 Oracle
®
Solaris 11.2 中管理 TCP/IP 网络、IPMP 和 IP 隧道
退出打印视图
Search Term
搜索范围:
本文档
整个文档库
» ...
Documentation Home
»
Oracle Solaris 11.2 Information Library (简体中文)
»
在 Oracle
®
Solaris 11.2 中管理 ...
»
关于 IPMP 管理
»
IPMP 的新增功能
更新时间: 2014 年 7 月
在 Oracle
®
Solaris 11.2 中管理 TCP/IP 网络、IPMP 和 IP 隧道
文档信息
使用本文档
产品文档库
获得 Oracle 支持
反馈
第 1 章 管理 TCP/IP 网络
定制 TCP/IP 属性
全局启用包转发
管理缺省地址选择
/etc/inet/ipaddrsel.conf 配置文件说明
ipaddrsel 命令说明
修改 IPv6 地址选择策略表的原因
如何管理 IPv6 地址选择策略表
如何仅修改当前会话的 IPv6 地址选择表
管理传输层服务
设置特权端口
实施通信拥塞控制
记录所有传入 TCP 连接的 IP 地址
添加使用 SCTP 协议的服务
如何添加使用 SCTP 协议的服务
配置 TCP 包装器
如何使用 TCP 包装器控制对 TCP 服务的访问
更改 TCP 接收缓冲区大小
使用 netstat 命令监视网络状态
按地址类型筛选 netstat 输出
显示套接字的状态
按协议显示统计信息
显示网络接口状态
显示用户和进程信息
显示已知路由的状态
使用 netstat 命令显示其他网络状态
使用 netcat 实用程序执行 TCP 和 UDP 管理
管理和记录网络状态显示
如何控制与 IP 相关的命令的显示输出
记录 IPv4 路由选择守护进程的操作
如何跟踪 IPv6 相邻节点搜索守护进程的活动
使用 ping 命令探测远程主机
为支持 IPv6 而对 ping 命令进行的修改
确定远程主机是否可访问
确定是否丢弃了您的主机与远程主机之间的包
使用 traceroute 命令显示路由信息
为支持 IPv6 而对 traceroute 命令进行的修改
搜索通向远程主机的路由
跟踪所有路由
使用 TShark 和 Wireshark 分析器分析网络通信
使用 snoop 命令监视包传送
为支持 IPv6 而对 snoop 命令进行的修改
如何检查来自所有接口的包
如何检查 IPMP 组中的包
如何将 snoop 输出捕获到文件
如何检查 IPv4 服务器和客户机之间的包
监视 IPv6 网络通信
使用 IP 层设备监视包
如何检查 IP 层上的包
用于检查包的方法
使用 ipstat 和 tcpstat 命令观察网络通信流量
第 2 章 关于 IPMP 管理
IPMP 的新增功能
IPMP 配置更改
Oracle Solaris 中的 IPMP 支持
使用 IPMP 的益处
用于使用 IPMP 的规则
IPMP 组件
IPMP 接口配置的类型
IPMP 的工作原理
IPMP 寻址
数据地址
测试地址
IPMP 中的故障检测
基于探测器的故障检测
使用测试地址的基于探测器的故障检测
不使用测试地址的基于探测器的故障检测
组故障
基于链路的故障检测
故障检测和匿名组功能
检测物理接口修复
FAILBACK=no 模式
IPMP 和动态重新配置
第 3 章 管理 IPMP
配置 IPMP 组
如何规划 IPMP 组
如何配置使用 DHCP 的 IPMP 组
如何配置活动/活动 IPMP 组
如何配置活动/备用 IPMP 组
部署 IPMP 时维护路由
如何在使用 IPMP 时保留缺省路由
管理 IPMP
如何将接口添加到 IPMP 组
如何从 IPMP 组中删除接口
如何将 IP 地址添加到 IPMP 组
如何从 IPMP 接口中删除 IP 地址
如何将接口从一个 IPMP 组移至另一个 IPMP 组
如何删除 IPMP 组
配置基于探测器的故障检测
关于基于探测器的故障检测
为基于探测器的故障检测选择目标的要求
选择故障检测方法
如何为基于探测器的故障检测手动指定目标系统
如何配置 IPMP 守护进程的行为
监视 IPMP 信息
定制 ipmpstat 命令的输出
在脚本中使用 ipmpstat 命令
第 4 章 关于 IP 隧道管理
IP 隧道管理中的新增功能
IP 隧道功能摘要
隧道类型
IPv6 和 IPv4 的组合网络环境中的隧道
6to4 隧道
6to4 隧道的拓扑
6to4relay 命令
通过 6to4 隧道的包流
启用 6to4 中继路由器隧道的注意事项
6to4 站点和本地 IPv6 站点之间的包流
关于部署 IP 隧道
创建 IP 隧道的要求
IP 隧道和 IP 接口的要求
第 5 章 管理 IP 隧道
Oracle Solaris 中的 IP 隧道管理
管理 IP 隧道
如何创建和配置 IP 隧道
如何配置 6to4 隧道
如何启用通往 6to4 中继路由器的 6to4 隧道
修改 IP 隧道配置
显示 IP 隧道的配置
显示 IP 隧道的属性
如何删除 IP 隧道
索引
索引 数字和符号
索引 C
索引 D
索引 E
索引 F
索引 I
索引 M
索引 N
索引 P
索引 R
索引 S
索引 T
索引 U
语言:
简体中文
IPMP 的新增功能
以下是本发行版中新增或已更改的功能。
上一页
下一页