This section describes the Oracle Hardware Management Pack server management option.
Oracle Hardware Management Pack provides command-line tools that help you manage and configure your Oracle servers from the operating system.
Hardware Management Pack enables you to do the following:
Enable in-band monitoring of your Oracle hardware over Simple Network Management Protocol (SNMP). You can use this information to integrate your Oracle servers into your data center management infrastructure.
Configure BIOS, UEFI BIOS, RAID volumes, and Oracle Integrated Lights Out Manager (ILOM).
Upgrade server component firmware.
View hardware configuration information and the status of your Oracle servers.
Set up an ILOM trap proxy that forwards SNMP traps from your Oracle ILOM service processor over the Host-to-ILOM Interconnect.
Configure zoning on supported servers running the Oracle Solaris operating system.
Access server service processors and perform management tasks using IPMItool.
Use Oracle LInux Fault Management Architecture (FMA) host-based command-line interface to view and act on faults using fault management commands similar to those available from the Oracle ILOM Fault Management shell.
Additional Oracle Hardware Management Pack information:
For server version information, refer to the Oracle Server X5-4 Product Notes
For functionality, refer to the Oracle X5 Series Servers Administration Guide (http://www.oracle.com/goto/x86AdminDiag/docs).
For more details on Oracle Hardware Management Pack, refer to:http://www.oracle.com/goto/ohmp/docs.
For information about system management tools, see: http://www.oracle.com/goto/system-management.