Index
Numbers and Symbols
- /etc/hosts.allow setting
How to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (Unified
Archives)- How to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (IPS
Repositories)
- How to Configure Oracle Solaris Cluster Software on All Nodes (XML)
- How to Configure Oracle Solaris Cluster Software on All Nodes (scinstall)
- /etc/inet/hosts file
- configuringHow to Install Oracle Solaris Software
- planningPublic-Network IP Addresses
- configuring
- /etc/inet/ntp.conf.include file
- /etc/inet/ntp.conf.sc file
- /etc/inet/ntp.conf file
- configuringConfiguring Network Time Protocol (NTP)
- configuring
- /etc/lvm/md.tab fileHow to Create an md.tab File
- /etc/vfstab file
- adding mount pointsHow to Create Cluster File Systems
- verifying the configurationHow to Create Cluster File Systems
- adding mount points
- /global directoryMount Information for Cluster File Systems
- /opt/SUNWcluster/bin/ directoryHow to Install pconsole Software on an Administrative
Console
- /opt/SUNWcluster/bin/pconsole utilityHow to Install pconsole Software on an Administrative
Console
- installing the softwareHow to Install pconsole Software on an Administrative
Console
- installing the software
- /usr/cluster/bin/ directoryHow to Set Up the Root Environment
- /usr/cluster/bin/claccess command
- adding nodes to the authorized-node listHow to Unconfigure Oracle Solaris Cluster Software to Correct Installation Problems
- removing nodes from the authorized-node listHow to Configure Oracle Solaris Cluster Software on Additional Global-Cluster Nodes
(scinstall)
- adding nodes to the authorized-node list
- /usr/cluster/bin/cldevice command
- determining device-ID namesHow to Configure Quorum Devices
- updating the global-devices namespaceHow to Create a Disk Set
- verifying command processingHow to Create a Disk Set
- determining device-ID names
- /usr/cluster/bin/clnode command
- viewing private hostnamesHow to Change Private Hostnames
- viewing private hostnames
- /usr/cluster/bin/clquorumserver command
- starting the quorum serverHow to Install and Configure Oracle Solaris Cluster Quorum Server Software
- starting the quorum server
- /usr/cluster/bin/clresource command
- disabling resourcesHow to Unconfigure a Zone Cluster
- listing resourcesHow to Unconfigure a Zone Cluster
- taking resource groups offlineHow to Unconfigure a Zone Cluster
- disabling resources
- /usr/cluster/bin/clresourcegroup command
- deleting resource groupsHow to Unconfigure a Zone Cluster
- unmanaging resource groupsHow to Unconfigure a Zone Cluster
- deleting resource groups
- /usr/cluster/bin/clsetup utility
- adding
- cluster interconnectsHow to Prepare the Cluster for Additional Global-Cluster Nodes
- file systems to a zone clusterHow to Add a Cluster File System to a Zone Cluster
(clsetup)
- global storage devices to a zone clusterHow to Add a Global Storage Device to a Zone Cluster
(clsetup)
- highly available local file systems to a zone clusterHow to Add a Highly Available Local File System to a Zone Cluster
(clsetup)
- ZFS storage pools to a zone clusterHow to Add a ZFS Storage Pool to a Zone Cluster
(clsetup)
- cluster interconnects
- changing private hostnamesHow to Change Private Hostnames
- creating a zone clusterHow to Create a Zone Cluster (clsetup)
- navigation tipHow to Create a Zone Cluster (clsetup)
- post installation setupHow to Configure Quorum Devices
- adding
- /usr/cluster/bin/cluster check command
- validating the clusterHow to Validate the Cluster
- validating the cluster
- /usr/cluster/bin/cluster command
- adding
- zone clusters to the private IP-address range
- creating new global clustersHow to Configure Oracle Solaris Cluster Software on All Nodes (XML)
- displaying private-network settingsHow to Prepare the Cluster for Additional Global-Cluster Nodes
- verifying installation modeHow to Verify the Quorum Configuration and Installation Mode
- adding
- /usr/cluster/bin/clzonecluster command
- booting the zone clusterHow to Create a Zone Cluster (clsetup)
- halting the zone clusterHow to Unconfigure a Zone Cluster
- installing the zone clusterHow to Create a Zone Cluster (clsetup)
- booting the zone cluster
- /usr/cluster/bin/scinstall command
- adding nodesConfiguring Oracle Solaris Cluster Software on Additional Global-Cluster Nodes
(scinstall)
- creating the global clusterConfiguring Oracle Solaris Cluster Software on All Nodes (scinstall)
- creating the global cluster by using Automated InstallerEstablishing a New Oracle Solaris Cluster With the Automated Installer
- unconfiguring Oracle Solaris Cluster softwareHow to Unconfigure Oracle Solaris Cluster Software to Correct Installation Problems
- adding nodes
A
- adapters
- local MAC addressPublic Network Configuration
- Oracle VM Server for SPARC guest domainsTransport Adapters
- tagged VLAN
- cluster interconnect guidelinesTransport Adapters
- public-network guidelinesPublic Network Configuration
- cluster interconnect guidelines
- VLAN
- private-network guidelinesPrivate Network Configuration
- private-network guidelines
- local MAC address
- adding
- See Alsoconfiguring
- See Alsoinstalling
- cluster-file-system mount points to new nodesHow to Install Oracle Solaris Software
- drives to a disk setAdding Drives to a Disk Set
- file systems to a zone clusterAdding File Systems to a Zone Cluster
- local file systems to a zone clusterAdding Local File Systems to a Specific Zone-Cluster Node
- mediator hostsHow to Add Mediator Hosts
- storage devices to zone clustersAdding Storage Devices to a Zone Cluster
- See Also
- address propertyHow to Create a Zone Cluster (clsetup)
- admin_low template
- Trusted ExtensionsHow to Install and Configure Trusted Extensions
- Trusted Extensions
- administrative console
- installing pconsole softwareHow to Install pconsole Software on an Administrative
Console
- installing pconsole software
- affinities
- scalable device-group resource groupsHow to Register and Configure the Scalable Device-Group Resource Group
- scalable device-group resource groups
- AI SeeAutomated Installer
- applications
- installing on a cluster file systemPlanning Cluster File Systems
- installing on a cluster file system
- archiveadm
- authentication Seeauthorized-node list
- authorized-node list
- Automated Installer
- custom manifestExample Automated Installer Cluster Installation Files
- custom system configuration profileExample Automated Installer Cluster Installation Files
- installing Oracle Solaris and Oracle Solaris Cluster softwareEstablishing a New Oracle Solaris Cluster With the Automated Installer
- manifest
- troubleshooting installationHow to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (IPS
Repositories)
- custom manifest
- automatic power-saving shutdown
- automatic reboot on disk-path failuresHow to Configure Oracle Solaris Cluster Software on All Nodes (scinstall)
- Availability Suite feature of Oracle Solaris software
B
- booting
- brand zones
- zone clustersZone-Cluster Requirements and Guidelines
- zone clusters
- brand propertyHow to Create a Zone Cluster (clsetup)
- BUI
- tasks you can perform
- add a file system to a zone clusterAdding File Systems to a Zone Cluster
- add storage a zone clusterAdding Storage Devices to a Zone Cluster
- create a zone clusterHow to Create a Zone Cluster (clsetup)
- view capped memory for a zone clusterHow to Create a Zone Cluster (clsetup)
- add a file system to a zone cluster
- tasks you can perform
C
- capped-cpu scope type
- zone clustersHow to Create a Zone Cluster (clsetup)
- zone clusters
- changing
- private hostnamesHow to Change Private Hostnames
- private IP-address rangeHow to Change the Private Network Configuration When Adding Nodes or Private Networks
- private hostnames
- cipso template
- global cluster IP addressesHow to Install and Configure Trusted Extensions
- zone cluster IP addressesHow to Configure a Zone Cluster to Use Trusted Extensions
- global cluster IP addresses
- claccess command
- adding nodes to the authorized-node listHow to Unconfigure Oracle Solaris Cluster Software to Correct Installation Problems
- removing nodes from the authorized-node listHow to Configure Oracle Solaris Cluster Software on Additional Global-Cluster Nodes
(scinstall)
- adding nodes to the authorized-node list
- cldevice command
- determining device-ID namesHow to Configure Quorum Devices
- updating the global-devices namespaceHow to Create a Disk Set
- verifying command processingHow to Create a Disk Set
- determining device-ID names
- clnode command
- viewing private hostnamesHow to Change Private Hostnames
- viewing private hostnames
- clquorumserver command
- starting the quorum serverHow to Install and Configure Oracle Solaris Cluster Quorum Server Software
- starting the quorum server
- clresource command
- disabling resourcesHow to Unconfigure a Zone Cluster
- listing resourcesHow to Unconfigure a Zone Cluster
- taking resource groups offlineHow to Unconfigure a Zone Cluster
- disabling resources
- clresourcegroup command
- bringing online resource groupsHow to Register and Configure the Framework Resource Groups
- creating
- multiple-owner volume-manager framework resource groupHow to Register and Configure the Framework Resource Groups
- Oracle ACFS resource groupHow to Register and Configure the Oracle ACFS Proxy Resource Group
- Oracle RAC framework resource groupHow to Register and Configure the Framework Resource Groups
- scalable resource groupHow to Register and Configure the Scalable Device-Group Resource Group
- SUNW.wait_zc_boot resource groupHow to Register and Configure the Oracle ASM Resource Group
- multiple-owner volume-manager framework resource group
- deleting resource groupsHow to Unconfigure a Zone Cluster
- unmanaging resource groupsHow to Unconfigure a Zone Cluster
- bringing online resource groups
- clsetup utility
- adding
- cluster interconnectsHow to Prepare the Cluster for Additional Global-Cluster Nodes
- file systems to a zone clusterHow to Add a Cluster File System to a Zone Cluster
(clsetup)
- global storage devices to a zone clusterHow to Add a Global Storage Device to a Zone Cluster
(clsetup)
- highly available local file systems to a zone clusterHow to Add a Highly Available Local File System to a Zone Cluster
(clsetup)
- ZFS storage pools to a zone clusterHow to Add a ZFS Storage Pool to a Zone Cluster
(clsetup)
- cluster interconnects
- changing private hostnamesHow to Change Private Hostnames
- creating a zone clusterHow to Create a Zone Cluster (clsetup)
- navigation tipHow to Create a Zone Cluster (clsetup)
- post installation setupHow to Configure Quorum Devices
- adding
- cluster check command
- validating the clusterHow to Validate the Cluster
- vfstab file checkHow to Create Cluster File Systems
- validating the cluster
- cluster file systems
- adding to a new nodeHow to Install Oracle Solaris Software
- adding to a zone clusterHow to Add a UFS Cluster File System to a Zone Cluster (CLI)
- adding to a zone cluster with clsetupHow to Add a Cluster File System to a Zone Cluster
(clsetup)
- configuringHow to Create Cluster File Systems
- installing applicationsPlanning Cluster File Systems
- LOFS restrictionPlanning Cluster File Systems
- mount optionsHow to Create Cluster File Systems
- planning
- restrictions
- communication end pointsPlanning Cluster File Systems
- fattach commandPlanning Cluster File Systems
- forcedirectioMount Information for Cluster File Systems
- zone clustersPlanning Cluster File Systems
- communication end points
- verifying the configurationHow to Create Cluster File Systems
- adding to a new node
- cluster interconnects
- changing the private IP-address rangeHow to Change the Private Network Configuration When Adding Nodes or Private Networks
- configuring on a single-host clusterHow to Prepare the Cluster for Additional Global-Cluster Nodes
- planningCluster Interconnect
- changing the private IP-address range
- cluster nameGlobal-Cluster Name
- cluster nodes
- cluster command
- adding
- zone clusters to the private IP-address range
- creating new global clustersHow to Configure Oracle Solaris Cluster Software on All Nodes (XML)
- displaying private-network settingsHow to Prepare the Cluster for Additional Global-Cluster Nodes
- verifying installation modeHow to Verify the Quorum Configuration and Installation Mode
- adding
- clzonecluster command
- booting the zone clusterHow to Create a Zone Cluster (clsetup)
- halting the zone clusterHow to Unconfigure a Zone Cluster
- installing the zone clusterHow to Create a Zone Cluster (clsetup)
- booting the zone cluster
- cold migration
- restriction for Oracle VM Server for SPARC softwareSPARC: Guidelines for Oracle VM Server for SPARC Logical Domains as Cluster Nodes
- restriction for Oracle VM Server for SPARC software
- communication end points
- restriction on cluster file systemsPlanning Cluster File Systems
- restriction on cluster file systems
- Compatibility GuideHow to Prepare for Cluster Software Installation
- config/enable_tcpwrappersdisabling
- How to Configure Oracle Solaris Cluster Software on Additional Global-Cluster Nodes (XML File)
- How to Configure Oracle Solaris Cluster Software on Additional Global-Cluster Nodes
(scinstall)
- How to Configure Oracle Solaris Cluster Software on All Nodes (XML)
- How to Configure Oracle Solaris Cluster Software on All Nodes (scinstall)
- config/enable_tcpwrappersenabling
- configuration guideHow to Prepare for Cluster Software Installation
- configuring
- additional global-cluster nodes
- cluster file systemsHow to Create Cluster File Systems
- cluster interconnects on a single-host clusterHow to Prepare the Cluster for Additional Global-Cluster Nodes
- disk setsHow to Create a Disk Set
- IP Filter feature of Oracle SolarisHow to Configure IP Filter
- IPMP groupsHow to Install Oracle Solaris Software
- md.tab fileHow to Create an md.tab File
- Network Time Protocol (NTP)Configuring Network Time Protocol (NTP)
- new global clusters
- by using an XML fileHow to Configure Oracle Solaris Cluster Software on All Nodes (XML)
- by using Automated InstallerEstablishing a New Oracle Solaris Cluster With the Automated Installer
- by using scinstallConfiguring Oracle Solaris Cluster Software on All Nodes (scinstall)
- by using an XML file
- Oracle ACFS file systemsCreating Oracle ACFS File Systems
- quorum devicesHow to Configure Quorum Devices
- quorum server softwareHow to Install and Configure Oracle Solaris Cluster Quorum Server Software
- Solaris Volume ManagerConfiguring Solaris Volume Manager Software
- state database replicasHow to Create State Database Replicas
- troubleshooting
- Trusted Extensions for use with zone clusters
- Trusted Extensions softwareHow to Install and Configure Trusted Extensions
- user work environmentHow to Set Up the Root Environment
- zone clustersCreating and Configuring a Zone Cluster
- console-access devices
- planningConsole-Access Devices
- planning
- cpu-shares propertyHow to Create a Zone Cluster (clsetup)
- create
- creating
- solaris10 brand zone clustersHow to Create a solaris10 Brand Zone Cluster
(CLI)
- zone clustersHow to Create a Zone Cluster (clsetup)
- solaris10 brand zone clusters
D
- data services
- support in solaris10 brand zone clustersHow to Create a Zone Cluster (clsetup)
- support in solaris10 brand zone clusters
- data-services installation
- by using the pkg commandHow to Install Oracle Solaris Cluster Software Packages
- by using the pkg command
- dedicated-cpu scope type
- zone clustersHow to Create a Zone Cluster (clsetup)
- zone clusters
- default routerHow to Create a Zone Cluster (clsetup)
- defrouter propertyHow to Create a Zone Cluster (clsetup)
- dependencies
- ScalDeviceGroup resource typeHow to Register and Configure the Scalable Device-Group Resource Group
- SUNW.ScalDeviceGroup resource typeHow to Register and Configure the Scalable Device-Group Resource Group
- SUNW.vucmm_svm resource typeHow to Register and Configure the Framework Resource Groups
- vucmm_svm resource typeHow to Register and Configure the Framework Resource Groups
- ScalDeviceGroup resource type
- device groups
- planningPlanning Device Groups
- replicated disksPlanning Device Groups
- resource group affinitiesHow to Register and Configure the Scalable Device-Group Resource Group
- setting the replication propertyHow to Create a Disk Set
- planning
- device-ID names
- determiningHow to Configure Quorum Devices
- determining
- DID devices
- adding to a zone clusterHow to Add a DID Device to a Zone Cluster (CLI)
- listing mappingsHow to Add Drives to a Disk Set
- adding to a zone cluster
- disabling
- fencing protocolsHow to Configure Quorum Devices
- installation modeHow to Configure Quorum Devices
- fencing protocols
- disk drives Seedrives
- disk sets
- adding drivesAdding Drives to a Disk Set
- adding to a zone clusterHow to Add a Disk Set to a Zone Cluster (CLI)
- configuringHow to Create a Disk Set
- repartitioning drivesHow to Repartition Drives in a Disk Set
- reserved namesGuidelines for Solaris Volume Manager Software
- adding drives
- disk strings
- dual-string mediator requirementsRequirements for Dual-String Mediators
- dual-string mediator requirements
- disk-path failures
- enabling automatic rebootHow to Configure Oracle Solaris Cluster Software on All Nodes (scinstall)
- enabling automatic reboot
- disk-path monitoring
- disks Seedrives
- disksets Seedisk sets
- domain console network interfaces
- drives
- adding to disk setsAdding Drives to a Disk Set
- mirroring differing device sizesGuidelines for Mirroring Multihost Disks
- repartitioningHow to Repartition Drives in a Disk Set
- adding to disk sets
- dual-string mediators
- adding hostsHow to Add Mediator Hosts
- repairing dataHow to Check For and Fix Bad Mediator Data
- adding hosts
E
- enable_priv_net propertyHow to Create a Zone Cluster (clsetup)
- enabling
- automatic reboot on disk-path failuresHow to Configure Oracle Solaris Cluster Software on All Nodes (scinstall)
- LOFS requirementsOracle Solaris OS Feature Requirements and Restrictions
- Oracle Solaris I/O multipathingHow to Install Oracle Solaris Software
- remote loginHow to Install and Configure Trusted Extensions
- automatic reboot on disk-path failures
- examples
- activating volumes in the md.tab fileActivating Volumes in the md.tab File
- adding
- drives to a disk setAdding Drives to a Disk Set
- local file systems to a zone-cluster nodeAdding a Local File System to a Zone-Cluster Node (CLI)
- local ZFS pools to a zone-cluster nodeAdding a Local ZFS Pool to a Zone-Cluster Node (CLI)
- mediator hostsAdding Mediator Hosts
- raw-disk devices to a zone-cluster nodeAdding a Raw-Disk Device to a Specific Zone-Cluster Node (CLI)
- drives to a disk set
- adding devices to a zone cluster
- DID devicesAdding a DID Device to a Zone Cluster (CLI)
- DID devices
- adding file systems to a zone cluster
- cluster file systemsAdding a UFS Cluster File System to a Zone Cluster (CLI)
- highly available local file systemsAdding a Highly Available Local File System to a Zone Cluster
(CLI)
- StorageTek QFS shared file systemsAdding a StorageTek QFS Shared File System as a Direct Mount to a
Zone Cluster (CLI)
- ZFS storage poolsAdding a ZFS Storage Pool to a Zone Cluster (CLI)
- cluster file systems
- configuring Oracle Solaris Cluster software
- on additional nodes by using scinstallConfiguring Oracle Solaris Cluster Software on an Additional Node
- on all nodes by using an XML fileConfiguring Oracle Solaris Cluster Software on All Nodes By Using an XML File
- on all nodes by using scinstallConfiguring Oracle Solaris Cluster Software on All Nodes
- on additional nodes by using scinstall
- creating a cluster file systemCreating a UFS Cluster File System
- creating a disk setCreating a Disk Set
- creating state database replicasCreating State Database Replicas
- md.tab fileSample md.tab File
- updating SCSI quorum devices after adding a nodeUpdating SCSI Quorum Devices After Adding a Node to a Two-Node Cluster
- activating volumes in the md.tab file
- exclusive IP type
- restriction for zone clustersZone-Cluster Requirements and Guidelines
- restriction for zone clusters
- explorer commandHow to Record Diagnostic Data of the Cluster Configuration
F
- failover file systems Seehighly available local file systems
- Fair Share Scheduler sharesHow to Create a Zone Cluster (clsetup)
- fattach command restrictionPlanning Cluster File Systems
- fencing protocolsGlobal Fencing
- disablingHow to Configure Quorum Devices
- NAS devicesNFS Guidelines
- SCSI quorum devicesQuorum Devices
- software quorumQuorum Devices
- disabling
- file system logging
- planningUFS Cluster File System Logging
- planning
- file systems
- adding to a zone clusterAdding File Systems to a Zone Cluster
- highly available local file systemsHow to Add a Highly Available Local File System to a Zone Cluster
(clsetup)
- ZFS storage poolsHow to Add a ZFS Storage Pool to a Zone Cluster
(clsetup)
- highly available local file systems
- adding to a zone cluster
- file-mac-profile property restrictionZone-Cluster Requirements and Guidelines
- forcedirectio command
- restrictionMount Information for Cluster File Systems
- restriction
G
- global devices
- file system limitation to UFSSystem Disk Partitions
- namespace
- updatingHow to Create a Disk Set
- updating
- restrictions on lofi deviceSystem Disk Partitions
- space requirement for lofi deviceSystem Disk Partitions
- file system limitation to UFS
- global fencingGlobal Fencing
- global file systems
- global storage devices
- adding to a zone clusterHow to Add a Global Storage Device to a Zone Cluster
(clsetup)
- adding to a zone cluster
- global-cluster nodes
- adding nodes
- by using an XML fileHow to Configure Oracle Solaris Cluster Software on Additional Global-Cluster Nodes (XML File)
- by using scinstallConfiguring Oracle Solaris Cluster Software on Additional Global-Cluster Nodes
(scinstall)
- updating quorum devices afterHow to Update Quorum Devices After Adding a Node to a Global Cluster
- by using an XML file
- creating the global cluster
- by using an XML fileHow to Configure Oracle Solaris Cluster Software on All Nodes (XML)
- by using Automated InstallerEstablishing a New Oracle Solaris Cluster With the Automated Installer
- by using scinstallConfiguring Oracle Solaris Cluster Software on All Nodes (scinstall)
- by using an XML file
- node ID number assignmentGlobal-Cluster Node Names and Node IDs
- Oracle VM Server for SPARC domainsHow to Prepare for Cluster Software Installation
- planning for zone clustersGlobal-Cluster Requirements and Guidelines
- verifying
- installation modeHow to Verify the Quorum Configuration and Installation Mode
- status
- How to Configure Oracle Solaris Cluster Software on Additional Global-Cluster Nodes
(scinstall)
- How to Replicate a Cluster from the Unified Archives
- How to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (Unified
Archives)
- How to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (IPS
Repositories)
- How to Configure Oracle Solaris Cluster Software on All Nodes (XML)
- How to Configure Oracle Solaris Cluster Software on All Nodes (scinstall)
- installation mode
- adding nodes
- Global_zone resource-type propertyZone-Cluster Requirements and Guidelines
H
- HA for NFS
- coexistence with highly available local file systems
- How to Configure Oracle Solaris Cluster Software on Additional Global-Cluster Nodes
(scinstall)
- How to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (Unified
Archives)
- How to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (IPS
Repositories)
- How to Configure Oracle Solaris Cluster Software on All Nodes (XML)
- How to Configure Oracle Solaris Cluster Software on All Nodes (scinstall)
- restriction with LOFS
- coexistence with highly available local file systems
- hardware RAID
- internal disk mirroringHow to Configure Internal Disk Mirroring
- internal disk mirroring
- HAStoragePlus See Alsohighly available local file systems
- mounting file systems in zone clustersZone-Cluster Requirements and Guidelines
- mounting file systems in zone clusters
- high-priority processes
- restrictionService Restrictions
- restriction
- highly available local file systems See AlsoHAStoragePlus
- adding to a zone clusterHow to Add a Highly Available Local File System to a Zone Cluster
(clsetup)
- alternative to cluster file systemsPlanning Cluster File Systems
- coexistence with HA for NFS
- How to Configure Oracle Solaris Cluster Software on Additional Global-Cluster Nodes
(scinstall)
- How to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (Unified
Archives)
- How to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (IPS
Repositories)
- How to Configure Oracle Solaris Cluster Software on All Nodes (XML)
- How to Configure Oracle Solaris Cluster Software on All Nodes (scinstall)
- LOFS restriction with HA for NFSOracle Solaris OS Feature Requirements and Restrictions
- quotas supportPlanning Cluster File Systems
- adding to a zone cluster
- highly available ZFS storage pools
- adding to a zone clusterHow to Add a ZFS Storage Pool to a Zone Cluster
(clsetup)
- adding to a zone cluster
- hostmodel propertyHow to Configure a Zone Cluster to Use Trusted Extensions
- hostname propertyHow to Create a Zone Cluster (clsetup)
- hosts file
- configuringHow to Install Oracle Solaris Software
- planningPublic-Network IP Addresses
- configuring
- hot-spare disks
I
- I/O multipathing software
- Oracle VM Server for SPARC restrictionSPARC: Guidelines for Oracle VM Server for SPARC Logical Domains as Cluster Nodes
- Oracle VM Server for SPARC restriction
- Immutable Zones
- restriction for zone clustersZone-Cluster Requirements and Guidelines
- restriction for zone clusters
- importing
- zones into zone clustersImporting Zones into Zone Clusters
- zones into zone clusters
- initialization filesHow to Set Up the Root Environment
- installation mode
- disablingHow to Configure Quorum Devices
- disabling
- installing
- See Alsoconfiguring
- See Alsoadding
- Availability Suite feature of Oracle Solaris softwareHow to Install the Availability Suite Feature of the Oracle Solaris
Software
- data services
- by using the pkg commandHow to Install Oracle Solaris Cluster Software Packages
- by using the pkg command
- Oracle Solaris Cluster softwareHow to Install Oracle Solaris Cluster Software Packages
- Oracle Solaris software
- with Oracle Solaris Cluster softwareEstablishing a New Oracle Solaris Cluster With the Automated Installer
- with Oracle Solaris Cluster software
- Oracle VM Server for SPARC softwareHow to Install Oracle VM Server for SPARC Software and Create Domains
- pconsole softwareHow to Install pconsole Software on an Administrative
Console
- quorum server softwareHow to Install and Configure Oracle Solaris Cluster Quorum Server Software
- Solaris Volume Manager softwareHow to Install Solaris Volume Manager
- StorageTek QFS softwareHow to Install StorageTek QFS Software
- Trusted Extensions softwareHow to Install and Configure Trusted Extensions
- See Also
- installing and configuring
- Oracle Solaris and Oracle Solaris Cluster
- integrated mirroringHow to Configure Internal Disk Mirroring
- internal hardware disk mirroringHow to Configure Internal Disk Mirroring
- IP addresses
- adding to a naming serviceHow to Install Oracle Solaris Software
- changing the private IP-address rangeHow to Change the Private Network Configuration When Adding Nodes or Private Networks
- guidelines for zone clustersGlobal-Cluster Requirements and Guidelines
- planning the private networkPrivate Network Configuration
- planning the public networkPublic-Network IP Addresses
- adding to a naming service
- IP Filter
- configuringHow to Configure IP Filter
- restriction on scalable data servicesHow to Configure IP Filter
- configuring
- IP network multipathing (IPMP) SeePNM object
- IP strict multihomingHow to Configure a Zone Cluster to Use Trusted Extensions
- IP type
- zone clustersZone-Cluster Requirements and Guidelines
- zone clusters
- ip-type propertyHow to Create a Zone Cluster (clsetup)
- ipadm listing private IP addresses
- How to Configure Oracle Solaris Cluster Software on Additional Global-Cluster Nodes (XML File)
- How to Configure Oracle Solaris Cluster Software on Additional Global-Cluster Nodes
(scinstall)
- How to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (Unified
Archives)
- How to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (IPS
Repositories)
- How to Configure Oracle Solaris Cluster Software on All Nodes (XML)
- How to Configure Oracle Solaris Cluster Software on All Nodes (scinstall)
- IPMP
- configuring groupsHow to Install Oracle Solaris Software
- planning the public networkPublic Network Configuration
- restriction on use with private networkPrivate Network Configuration
- configuring groups
- IPv6 addresses
- private network restriction
- public-network usePublic Network Configuration
J
- java
- minimum versionOracle Solaris OS Feature Requirements and Restrictions
- minimum version
L
- labeled brand zone clusters
- configuring with Trusted ExtensionsHow to Configure a Zone Cluster to Use Trusted Extensions
- planningZone Clusters
- configuring with Trusted Extensions
- LDAP configuration for Trusted ExtensionsHow to Install and Configure Trusted Extensions
- licenses
- planningLicensing
- planning
- lightweight processes
- zone clustersHow to Create a Zone Cluster (clsetup)
- zone clusters
- link-based IPMP groupsPublic Network Configuration
- live migration
- restriction for Oracle VM Server for SPARC softwareSPARC: Guidelines for Oracle VM Server for SPARC Logical Domains as Cluster Nodes
- restriction for Oracle VM Server for SPARC software
- local
- file systems
- adding to a zone clusterHow to Add a Highly Available Local File System to a Zone Cluster
(CLI)
- adding to a zone cluster
- MAC addressPublic Network Configuration
- file systems
- local file systems
- adding to a specific zone-cluster nodeHow to Add a Local File System to a Specific Zone-Cluster Node
(CLI)
- adding to a zone cluster
- adding to a specific zone-cluster node
- local ZFS storage pools
- adding to a specific zone-cluster nodeHow to Add a Local ZFS Storage Pool to a Specific Zone-Cluster Node
(CLI)
- adding to a specific zone-cluster node
- locked memoryHow to Create a Zone Cluster (clsetup)
- locked propertyHow to Create a Zone Cluster (clsetup)
- lofi device
- space requirementSystem Disk Partitions
- use restrictionsSystem Disk Partitions
- space requirement
- log files
- Oracle Solaris Cluster installationHow to Configure Oracle Solaris Cluster Software on All Nodes (scinstall)
- Oracle Solaris Cluster installation
- logging for cluster file systems
- planningUFS Cluster File System Logging
- planning
- logical addresses
- planningPublic Network Configuration
- planning
- logical network interfaces
- restrictionTransport Adapters
- restriction
- loopback file system (LOFS)
- LWPs
- zone clustersHow to Create a Zone Cluster (clsetup)
- zone clusters
M
- man pages
- manifest
- Automated Installer
- Automated Installer custom fileExample Automated Installer Cluster Installation Files
- max-lwps propertyHow to Create a Zone Cluster (clsetup)
- max-msg-ids propertyHow to Create a Zone Cluster (clsetup)
- max-sem-ids
- max-shm-ids propertyHow to Create a Zone Cluster (clsetup)
- max-shm-memory propertyHow to Create a Zone Cluster (clsetup)
- md.tab file
- configuringHow to Create an md.tab File
- configuring
- mediators Seedual-string mediators
- message queue IDs
- zone clustersHow to Create a Zone Cluster (clsetup)
- zone clusters
- mirroring
- differing device sizesGuidelines for Mirroring Multihost Disks
- internal disksHow to Configure Internal Disk Mirroring
- multihost disksGuidelines for Mirroring Multihost Disks
- planningMirroring Guidelines
- root pool planningGuidelines for Mirroring the ZFS Root Pool
- differing device sizes
- mount options for cluster file systems
- requirementsHow to Create Cluster File Systems
- StorageTek QFS softwareHow to Add a Cluster File System to a Zone Cluster
(clsetup)
- requirements
- mount points
- adding to new nodesHow to Install Oracle Solaris Software
- cluster file systemsMount Information for Cluster File Systems
- modifying the /etc/vfstab fileHow to Create Cluster File Systems
- adding to new nodes
- MPxIO SeeOracle Solaris I/O multipathing
- multihost disks
- multiple-owner volume-manager framework resource group
- multiported disks Seemultihost disks
- multiuser services
N
- naming conventions
- clusterGlobal-Cluster Name
- global-cluster nodesGlobal-Cluster Node Names and Node IDs
- private hostnamesPrivate Hostnames
- raw-disk devicesHow to Create Cluster File Systems
- tagged VLAN adaptersTransport Adapters
- zone clustersZone-Cluster Requirements and Guidelines
- cluster
- naming service
- adding IP-address mappingsHow to Install Oracle Solaris Software
- adding IP-address mappings
- NAS devices
- configuring as quorum devicesHow to Configure Quorum Devices
- fencingNFS Guidelines
- troubleshooting in a zone cluster installationHow to Create a Zone Cluster (clsetup)
- configuring as quorum devices
- NAT and IP Filter feature of Oracle Solaris softwareOracle Solaris OS Feature Requirements and Restrictions
- ncpus propertyHow to Create a Zone Cluster (clsetup)
- netmasks
- changing the private netmaskHow to Change the Private Network Configuration When Adding Nodes or Private Networks
- displaying the private netmaskHow to Prepare the Cluster for Additional Global-Cluster Nodes
- planning the private networkPrivate Network Configuration
- quorum server requirementsHow to Configure Quorum Devices
- changing the private netmask
- Network Auto-Magic (NWAM)
- Network File System (NFS)
- guidelines for cluster nodesNFS Guidelines
- HA for NFS restriction with LOFSNFS Guidelines
- guidelines for cluster nodes
- network interface card (NIC) support for local MAC addressesPublic Network Configuration
- Network Time Protocol (NTP)
- configuringConfiguring Network Time Protocol (NTP)
- guidelinesNetwork Time Protocol (NTP)
- configuring
- network-attached storage SeeNAS
- NFS SeeNetwork File System (NFS)
- NIC support for local MAC addressesPublic Network Configuration
- NIS servers
- restriction for cluster nodesService Restrictions
- restriction for cluster nodes
- node IDsGlobal-Cluster Node Names and Node IDs
- number assignmentGlobal-Cluster Node Names and Node IDs
- number assignment
- node lists
- device groupsGuidelines for Volume Manager Software
- device groups
- nodes See global-cluster nodes
- noncluster mode
- NTP
- configuringConfiguring Network Time Protocol (NTP)
- guidelinesNetwork Time Protocol (NTP)
- configuring
- ntp.conf.include file
- ntp.conf.sc file
- ntp.conf file
- configuringConfiguring Network Time Protocol (NTP)
- configuring
- num_xip_zoneclusters propertyHow to Create a Zone Cluster (clsetup)
O
- Oracle ACFS file systems
- adding to a zone clusterHow to Add an Oracle ACFS File System to a Zone Cluster (CLI)
- configuration diagramsSample Configurations of an Oracle ACFS File System
- framework resource groupsHow to Register and Configure the Framework Resource Groups
- adding to a zone cluster
- Oracle Explorer softwareHow to Record Diagnostic Data of the Cluster Configuration
- Oracle RAC framework resource group
- configuring for Oracle ACFSHow to Register and Configure the Framework Resource Groups
- configuring for Oracle ACFS
- Oracle Solaris
- minimum packageOracle Solaris OS Feature Requirements and Restrictions
- minimum package
- Oracle Solaris Cluster Manager SeeBUI
- adding
- ZFS storage to a zone clusterHow to Add a ZFS Storage Pool to a Zone Cluster
(clsetup)
- ZFS storage to a zone cluster
- tasks you can perform
- adding cluster file system to a zone clusterHow to Add a Cluster File System to a Zone Cluster
(clsetup)
- adding highly available local file systems to a zone clusterHow to Add a Highly Available Local File System to a Zone Cluster
(clsetup)
- adding shared storage to a zone clusterHow to Add a Global Storage Device to a Zone Cluster
(clsetup)
- adding cluster file system to a zone cluster
- adding
- Oracle Solaris Cluster software
- group packages
- publisher
- How to Install Solaris Volume Manager
- How to Install the Availability Suite Feature of the Oracle Solaris
Software
- How to Install Oracle Solaris Cluster Software Packages
- How to Install Oracle Solaris Cluster Software Packages
- How to Install and Configure Oracle Solaris Cluster Quorum Server Software
- How to Install and Configure Oracle Solaris Cluster Quorum Server Software
- How to Install pconsole Software on an Administrative
Console
- How to Install pconsole Software on an Administrative
Console
- How to Install Oracle Solaris Software
- uninstalling softwareUninstalling Software From the Cluster
- Oracle Solaris I/O multipathing software
- Oracle VM Server for SPARC restrictionSPARC: Guidelines for Oracle VM Server for SPARC Logical Domains as Cluster Nodes
- Oracle VM Server for SPARC restriction
- Oracle Solaris software
- installing
- Availability Suite featureHow to Install the Availability Suite Feature of the Oracle Solaris
Software
- Trusted Extensions featureHow to Install and Configure Trusted Extensions
- with Oracle Solaris Cluster softwareEstablishing a New Oracle Solaris Cluster With the Automated Installer
- Availability Suite feature
- planningPlanning the Oracle Solaris OS
- /varfile systemSystem Disk Partitions
- partitionsSystem Disk Partitions
- root (/) file systemSystem Disk Partitions
- volume managersSystem Disk Partitions
- /varfile system
- publisher
- restrictions
- automatic power-saving shutdownOracle Solaris OS Feature Requirements and Restrictions
- IP Filter featureOracle Solaris OS Feature Requirements and Restrictions
- Network Auto-Magic (NWAM)Oracle Solaris OS Feature Requirements and Restrictions
- automatic power-saving shutdown
- SMF
- Trusted Extensions feature SeeTrusted Extensions
- uninstalling
- Availability Suite featureHow to Uninstall the Availability Suite Feature of the Oracle Solaris Software
- Availability Suite feature
- installing
- Oracle Solaris Unified Archive
- installing Oracle Solaris and Oracle Solaris Cluster softwareEstablishing a New Oracle Solaris Cluster With the Automated Installer
- installing Oracle Solaris and Oracle Solaris Cluster software
- Oracle Solaris unified archive
- installing and configuring Oracle Solaris and Oracle Solaris Cluster softwareHow to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (Unified
Archives)
- installing and configuring Oracle Solaris and Oracle Solaris Cluster software
- Oracle Solaris zones
- fencing for NAS devicesNFS Guidelines
- quorum serversQuorum Server Configuration
- fencing for NAS devices
- Oracle VM Server for SPARC software
- cold migration restrictionSPARC: Guidelines for Oracle VM Server for SPARC Logical Domains as Cluster Nodes
- domains as cluster nodesHow to Prepare for Cluster Software Installation
- guest domains
- planning the address rangePrivate Network Configuration
- virtual adapter namesTransport Adapters
- planning the address range
- guidelines for cluster nodesSPARC: Guidelines for Oracle VM Server for SPARC Logical Domains as Cluster Nodes
- I/O multipathing software restrictionSPARC: Guidelines for Oracle VM Server for SPARC Logical Domains as Cluster Nodes
- live migration restrictionSPARC: Guidelines for Oracle VM Server for SPARC Logical Domains as Cluster Nodes
- virtual disk multipathing restrictionSPARC: Guidelines for Oracle VM Server for SPARC Logical Domains as Cluster Nodes
- cold migration restriction
P
- package installation
- Oracle Solaris Cluster man pagesHow to Install pconsole Software on an Administrative
Console
- Oracle Solaris Cluster softwareHow to Install Oracle Solaris Cluster Software Packages
- pconsole softwareHow to Install pconsole Software on an Administrative
Console
- Oracle Solaris Cluster man pages
- Parallel Console Access (pconsole) software
- partitions
- /var file systemSystem Disk Partitions
- repartitioning drivesHow to Repartition Drives in a Disk Set
- root (/) file systemSystem Disk Partitions
- volume managerSystem Disk Partitions
- /var file system
- patches Seesoftware updates
- PATH
- administrative consoleHow to Install pconsole Software on an Administrative
Console
- cluster nodesHow to Set Up the Root Environment
- administrative console
- pconsole utility
- installing the softwareHow to Install pconsole Software on an Administrative
Console
- using
- How to Replicate a Cluster from the Unified Archives
- How to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (Unified
Archives)
- How to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (IPS
Repositories)
- How to Install Oracle Solaris Cluster Software Packages
- installing the software
- physical memory
- zone clustersHow to Create a Zone Cluster (clsetup)
- zone clusters
- pkg program
- installing software packagesHow to Install Oracle Solaris Cluster Software Packages
- installing software packages
- PNM object
- automatic group creation during installationPublic Network Configuration
- automatic group creation during installation
- PNM objects
- restriction on use with private networkPrivate Network Configuration
- restriction on use with private network
- private hostnames
- changingHow to Change Private Hostnames
- planningPrivate Hostnames
- verifyingHow to Change Private Hostnames
- zone clustersZone-Cluster Requirements and Guidelines
- changing
- private IP addresses
- listing with ipadm
- How to Configure Oracle Solaris Cluster Software on Additional Global-Cluster Nodes (XML File)
- How to Configure Oracle Solaris Cluster Software on Additional Global-Cluster Nodes
(scinstall)
- How to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (Unified
Archives)
- How to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (IPS
Repositories)
- How to Configure Oracle Solaris Cluster Software on All Nodes (XML)
- How to Configure Oracle Solaris Cluster Software on All Nodes (scinstall)
- listing with ipadm
- private network
- adding zone clusters to the IP-address range
- changing the IP-address rangeHow to Change the Private Network Configuration When Adding Nodes or Private Networks
- displaying settingsHow to Prepare the Cluster for Additional Global-Cluster Nodes
- IPv6 address restrictionTransport Adapters
- Oracle VM Server for SPARC guest domainsPrivate Network Configuration
- planningPrivate Network Configuration
- restriction on PNM objectsPrivate Network Configuration
- use in zone clustersGlobal-Cluster Requirements and Guidelines
- probe-based IPMP groupsPublic Network Configuration
- public network
- adding IP addresses to a naming serviceHow to Install Oracle Solaris Software
- IPv6 supportPublic Network Configuration
- planningPublic Network Configuration
- adding IP addresses to a naming service
- publisher
- Oracle Solaris Cluster software
- How to Install Solaris Volume Manager
- How to Install the Availability Suite Feature of the Oracle Solaris
Software
- How to Install Oracle Solaris Cluster Software Packages
- How to Install Oracle Solaris Cluster Software Packages
- How to Install and Configure Oracle Solaris Cluster Quorum Server Software
- How to Install and Configure Oracle Solaris Cluster Quorum Server Software
- How to Install pconsole Software on an Administrative
Console
- How to Install pconsole Software on an Administrative
Console
- How to Install Oracle Solaris Software
- Oracle Solaris Cluster software
Q
- QFS SeeStorageTek QFS software
- quorum devices See Alsoquorum servers
- and mirroringGuidelines for Mirroring the ZFS Root Pool
- initial configurationHow to Configure Quorum Devices
- NAS devicesHow to Configure Quorum Devices
- planningQuorum Devices
- quorum serversHow to Configure Quorum Devices
- restriction for replicated devicesQuorum Devices
- SATA disksQuorum Devices
- SCSI protocol settingQuorum Devices
- software quorum protocolQuorum Devices
- troubleshooting
- clsetup failureHow to Configure Quorum Devices
- scinstall failureHow to Configure Quorum Devices
- vote countHow to Configure Quorum Devices
- clsetup failure
- updating after adding a nodeHow to Update Quorum Devices After Adding a Node to a Global Cluster
- ZFS restrictionQuorum Devices
- and mirroring
- quorum servers See Alsoquorum devices
- /etc/scqsd/scqsd.conf fileHow to Install and Configure Oracle Solaris Cluster Quorum Server Software
- configuring as quorum devicesHow to Configure Quorum Devices
- guidelinesQuorum Server Configuration
- installation directoryHow to Install and Configure Oracle Solaris Cluster Quorum Server Software
- installing quorum server softwareHow to Install and Configure Oracle Solaris Cluster Quorum Server Software
- non-global zonesQuorum Server Configuration
- requirements as a quorum deviceHow to Configure Quorum Devices
- /etc/scqsd/scqsd.conf file
- quotas
- restriction on cluster file systemsPlanning Cluster File Systems
- restriction on cluster file systems
R
- rac_framework resource type
- RAID
- restrictionGuidelines for Volume Manager Software
- restriction
- raidctl commandHow to Configure Internal Disk Mirroring
- rarpd service
- restriction for cluster nodesService Restrictions
- restriction for cluster nodes
- raw-disk devices
- adding to a zone clusterHow to Add a Raw-Disk Device to a Specific Zone-Cluster Node
(CLI)
- naming conventionsHow to Create Cluster File Systems
- adding to a zone cluster
- rebooting
- recovering
- unsuccessful cluster node creation
- registering
- ScalDeviceGroup resource typeHow to Register and Configure the Scalable Device-Group Resource Group
- SUNW.rac_framework resource typeHow to Register and Configure the Framework Resource Groups
- SUNW.ScalDeviceGroup resource typeHow to Register and Configure the Scalable Device-Group Resource Group
- SUNW.vucmm_framework resource typeHow to Register and Configure the Framework Resource Groups
- SUNW.vucmm_svm resource typeHow to Register and Configure the Framework Resource Groups
- ScalDeviceGroup resource type
- remote login
- Trusted ExtensionsHow to Install and Configure Trusted Extensions
- Trusted Extensions
- removing
- See Alsounconfiguring
- See Alsouninstalling
- Oracle Solaris Cluster softwareUninstalling Software From the Cluster
- partially configured nodeHow to Unconfigure Oracle Solaris Cluster Software to Correct Installation Problems
- zone clustersHow to Unconfigure a Zone Cluster
- See Also
- repairing
- mediator dataHow to Check For and Fix Bad Mediator Data
- mediator data
- replicated devices
- disk requirementPlanning Device Groups
- restriction as quorum devicesQuorum Devices
- setting the replication propertyHow to Create a Disk Set
- disk requirement
- replicating
- a zone cluster
- from unified archivesHow to Replicate a Cluster from the Unified Archives
- from unified archives
- a zone cluster node
- from unified archivesHow to Replicate a Cluster from the Unified Archives
- from unified archives
- a zone cluster
- resource groups
- making unmanagedHow to Unconfigure a Zone Cluster
- multiple-owner volume-manager frameworkHow to Register and Configure the Framework Resource Groups
- scalable device group
- making unmanaged
- resource types
- ScalDeviceGroup
- SUNW.crs_frameworkHow to Register and Configure the Framework Resource Groups
- SUNW.rac_framework
- SUNW.ScalDeviceGroup
- SUNW.vucmm_framework
- resources
- restarting
- restrictions
- file-mac-profile property for zone clustersZone-Cluster Requirements and Guidelines
- Immutable Zones property for zone clustersZone-Cluster Requirements and Guidelines
- lofi deviceSystem Disk Partitions
- PNM objects on private-network adaptersPrivate Network Configuration
- virtual disk multipathingSPARC: Guidelines for Oracle VM Server for SPARC Logical Domains as Cluster Nodes
- file-mac-profile property for zone clusters
- root environment
- configuringHow to Set Up the Root Environment
- configuring
- root pool mirroring
- routers
- restriction for cluster nodesService Restrictions
- restriction for cluster nodes
- RPC service
- disabling TCP wrappers
- How to Configure Oracle Solaris Cluster Software on Additional Global-Cluster Nodes (XML File)
- How to Configure Oracle Solaris Cluster Software on Additional Global-Cluster Nodes
(scinstall)
- How to Configure Oracle Solaris Cluster Software on All Nodes (XML)
- How to Configure Oracle Solaris Cluster Software on All Nodes (scinstall)
- enabling TCP wrappers
- restoring external accessHow to Install Oracle Solaris Cluster Software Packages
- restricted program numbersService Restrictions
- disabling TCP wrappers
S
- SATA disks
- configuring as quorum devicesQuorum Devices
- configuring as quorum devices
- scalable data services
- IP Filter restrictionHow to Configure IP Filter
- IP Filter restriction
- scalable device groups
- resource group affinitiesHow to Register and Configure the Scalable Device-Group Resource Group
- resource group affinities
- ScalDeviceGroup resource type
- scinstall command
- adding nodesConfiguring Oracle Solaris Cluster Software on Additional Global-Cluster Nodes
(scinstall)
- creating the global clusterConfiguring Oracle Solaris Cluster Software on All Nodes (scinstall)
- creating the global cluster by using Automated InstallerEstablishing a New Oracle Solaris Cluster With the Automated Installer
- unconfiguring Oracle Solaris Cluster softwareHow to Unconfigure Oracle Solaris Cluster Software to Correct Installation Problems
- adding nodes
- scope propertyHow to Create a Zone Cluster (clsetup)
- SCSI devices
- correcting reservations after adding a third nodeHow to Update Quorum Devices After Adding a Node to a Global Cluster
- fencing protocol setting in quorum devicesQuorum Devices
- correcting reservations after adding a third node
- semaphore IDs
- zone clustersHow to Create a Zone Cluster (clsetup)
- zone clusters
- shared devices
- installing quorum devicesHow to Configure Quorum Devices
- installing quorum devices
- shared memory
- zone clustersHow to Create a Zone Cluster (clsetup)
- zone clusters
- shared memory IDs
- zone clustersHow to Create a Zone Cluster (clsetup)
- zone clusters
- shared IP type
- zone clustersZone-Cluster Requirements and Guidelines
- zone clusters
- single-host clusters
- configuring cluster interconnectsHow to Prepare the Cluster for Additional Global-Cluster Nodes
- configuring cluster interconnects
- single-node clusters Seesingle-host clusters
- SMF
- software quorum protocolQuorum Devices
- software RAID
- restrictionGuidelines for Volume Manager Software
- restriction
- software updates
- planningSoftware Updates
- planning
- Solaris Volume Manager
- configuringConfiguring Solaris Volume Manager Software
- disk set reserved namesGuidelines for Solaris Volume Manager Software
- disk sets
- adding drivesAdding Drives to a Disk Set
- adding to a zone clusterHow to Add a Disk Set to a Zone Cluster (CLI)
- configuringHow to Create a Disk Set
- repartitioning drivesHow to Repartition Drives in a Disk Set
- adding drives
- dual-string mediators
- adding hostsHow to Add Mediator Hosts
- repairing bad dataHow to Check For and Fix Bad Mediator Data
- adding hosts
- installing the softwareHow to Install Solaris Volume Manager
- md.tab fileHow to Create an md.tab File
- mediators Seedual-string mediators
- raw-disk device namesHow to Create Cluster File Systems
- state database replicasHow to Create State Database Replicas
- unique namingGuidelines for Solaris Volume Manager Software
- volumes
- activatingHow to Activate Volumes
- activating
- configuring
- solaris10 brand zone clusters
- solaris10 brand zone clusters
- planningZone Clusters
- supported versionsHow to Create a Zone Cluster (clsetup)
- zone root passwordHow to Create a Zone Cluster (clsetup)
- planning
- solaris brand zone clusters
- planningZone Clusters
- planning
- spanning tree algorithm
- disabling for quorum serversQuorum Server Configuration
- disabling for quorum servers
- starting
- NTP
- pconsole utility
- How to Replicate a Cluster from the Unified Archives
- How to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (Unified
Archives)
- How to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (IPS
Repositories)
- How to Install Oracle Solaris Cluster Software Packages
- How to Install pconsole Software on an Administrative
Console
- state database replicas
- configuringHow to Create State Database Replicas
- configuring
- status
- dual-string mediatorsHow to Check For and Fix Bad Mediator Data
- dual-string mediators
- storage devices
- adding global storage devices to a zone clusterHow to Add a Global Storage Device to a Zone Cluster
(clsetup)
- adding raw-disk devices to a zone clusterHow to Add a Raw-Disk Device to a Specific Zone-Cluster Node
(CLI)
- adding to zone clustersAdding Storage Devices to a Zone Cluster
- adding global storage devices to a zone cluster
- StorageTek QFS
- adding shared file systems to a zone clusterHow to Add a StorageTek QFS Shared File System to a Zone Cluster
(CLI)
- adding shared file systems to a zone cluster
- StorageTek QFS software
- installing the softwareHow to Install StorageTek QFS Software
- limited usePlanning Cluster File Systems
- restrictionMount Information for Cluster File Systems
- installing the software
- Sun Explorer software SeeOracle Explorer software
- Sun StorageTek Availability Suite SeeAvailability Suite feature of Oracle Solaris software
- SUNW.crs_framework resource type
- SUNW.rac_framework resource group
- configuring for Oracle ACFSHow to Register and Configure the Framework Resource Groups
- configuring for Oracle ACFS
- SUNW.rac_framework resource type
- SUNW.ScalDeviceGroup resource type
- SUNW.vucmm_framework resource type
- SUNW.vucmm_svm resource type
- supported configurationsHow to Prepare for Cluster Software Installation
- swap
- memory for zone clustersHow to Create a Zone Cluster (clsetup)
- planningSystem Disk Partitions
- swap propertyHow to Create a Zone Cluster (clsetup)
- memory for zone clusters
- switches
- planningTransport Switches
- planning
- sysid configuration for zone clustersHow to Create a Zone Cluster (clsetup)
- system configuration profile
- Automated Installer custom fileExample Automated Installer Cluster Installation Files
- Automated Installer custom file
T
- tagged VLAN adapters
- cluster interconnect guidelinesTransport Adapters
- public-network guidelinesPublic Network Configuration
- cluster interconnect guidelines
- TCP wrappers for RPC
- disabling
- How to Configure Oracle Solaris Cluster Software on Additional Global-Cluster Nodes (XML File)
- How to Configure Oracle Solaris Cluster Software on Additional Global-Cluster Nodes
(scinstall)
- How to Configure Oracle Solaris Cluster Software on All Nodes (XML)
- How to Configure Oracle Solaris Cluster Software on All Nodes (scinstall)
- enabling
- modifying /etc/hosts.allow
- How to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (Unified
Archives)
- How to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (IPS
Repositories)
- How to Configure Oracle Solaris Cluster Software on All Nodes (XML)
- How to Configure Oracle Solaris Cluster Software on All Nodes (scinstall)
- disabling
- three-way mirroringGuidelines for Mirroring Multihost Disks
- tncfg templateHow to Install and Configure Trusted Extensions
- transport adapters Seeadapters
- transport switches
- planningTransport Switches
- planning
- troubleshooting
- Automated Installer installationHow to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (IPS
Repositories)
- configuring
- new global clusters
- explorer baseline record of the configurationHow to Record Diagnostic Data of the Cluster Configuration
- NAS devices in a zone clusterHow to Create a Zone Cluster (clsetup)
- quorum devices
- clsetup failureHow to Configure Quorum Devices
- scinstall failureHow to Configure Quorum Devices
- vote countHow to Configure Quorum Devices
- clsetup failure
- quorum server installationHow to Install and Configure Oracle Solaris Cluster Quorum Server Software
- removing partially configured nodeHow to Unconfigure Oracle Solaris Cluster Software to Correct Installation Problems
- Automated Installer installation
- Trusted Extensions
- admin_low templateHow to Install and Configure Trusted Extensions
- cipso template
- global clusterHow to Install and Configure Trusted Extensions
- global cluster
- configuring a zone clusterHow to Configure a Zone Cluster to Use Trusted Extensions
- installationHow to Install and Configure Trusted Extensions
- IP strict multihomingHow to Configure a Zone Cluster to Use Trusted Extensions
- labeled brandZone Clusters
- password filesHow to Create a Zone Cluster (clsetup)
- remote loginHow to Install and Configure Trusted Extensions
- tncfg templateHow to Install and Configure Trusted Extensions
- txzonemgr BUIHow to Create a Zone Cluster (clsetup)
- zoneshare scriptHow to Install and Configure Trusted Extensions
- admin_low template
U
- UFS logging
- planningUFS Cluster File System Logging
- planning
- unconfiguring
- See Alsouninstalling
- See Alsoremoving
- Oracle Solaris Cluster softwareHow to Unconfigure Oracle Solaris Cluster Software to Correct Installation Problems
- zone clustersHow to Unconfigure a Zone Cluster
- See Also
- unified archives
- archiveadmHow to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (Unified
Archives)
- replicating a zone clusterHow to Replicate a Cluster from the Unified Archives
- archiveadm
- uninstalling
- See Alsounconfiguring
- See Alsoremoving
- Availability Suite feature of Oracle Solaris softwareHow to Uninstall the Availability Suite Feature of the Oracle Solaris Software
- Oracle Solaris Cluster softwareUninstalling Software From the Cluster
- See Also
- unique naming
- Solaris Volume ManagerGuidelines for Solaris Volume Manager Software
- Solaris Volume Manager
- user-initialization files
- modifyingHow to Set Up the Root Environment
- modifying
V
- validating the clusterHow to Validate the Cluster
- verifying
- automatic reboot on disk-path failuresHow to Configure Oracle Solaris Cluster Software on All Nodes (scinstall)
- cldevice command processingHow to Create a Disk Set
- cluster configurationHow to Validate the Cluster
- cluster node status
- How to Configure Oracle Solaris Cluster Software on Additional Global-Cluster Nodes
(scinstall)
- How to Replicate a Cluster from the Unified Archives
- How to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (Unified
Archives)
- How to Install and Configure Oracle Solaris and Oracle Solaris Cluster Software (IPS
Repositories)
- How to Configure Oracle Solaris Cluster Software on All Nodes (XML)
- How to Configure Oracle Solaris Cluster Software on All Nodes (scinstall)
- installation modeHow to Verify the Quorum Configuration and Installation Mode
- Oracle Solaris Cluster software installationHow to Verify the Quorum Configuration and Installation Mode
- private hostnamesHow to Change Private Hostnames
- quorum configurationsHow to Verify the Quorum Configuration and Installation Mode
- SMF
- vfstab configurationHow to Create Cluster File Systems
- automatic reboot on disk-path failures
- vfstab file
- adding mount pointsHow to Create Cluster File Systems
- verifying the configurationHow to Create Cluster File Systems
- adding mount points
- virtual disk multipathing
- VLAN adapters
- cluster interconnect guidelinesTransport Adapters
- private-network guidelinesPrivate Network Configuration
- public-network guidelinesPublic Network Configuration
- cluster interconnect guidelines
- volume managers See AlsoSolaris Volume Manager
- partitions forSystem Disk Partitions
- planning
- generalPlanning Volume Management
- Solaris Volume ManagerGuidelines for Solaris Volume Manager Software
- general
- partitions for
- volumes
- Solaris Volume Manager
- activatingHow to Activate Volumes
- activating
- Solaris Volume Manager
- vucmm_framework resource type
- vucmm_svm resource type
Z
- ZFS root pools
- internal disk mirroringHow to Configure Internal Disk Mirroring
- planning mirroringGuidelines for Mirroring the ZFS Root Pool
- internal disk mirroring
- ZFS storage pools
- adding a local pool to a zone-cluster nodeHow to Add a Local ZFS Storage Pool to a Specific Zone-Cluster Node
(CLI)
- adding to a zone cluster
- restrictionsQuorum Devices
- adding a local pool to a zone-cluster node
- zone clusters
- adding an Oracle ACFS file systemHow to Add an Oracle ACFS File System to a Zone Cluster (CLI)
- adding devices
- global storage devicesHow to Add a Global Storage Device to a Zone Cluster
(clsetup)
- global storage devices
- adding file systemsAdding File Systems to a Zone Cluster
- cluster file systems
- highly available local file systemsHow to Add a Highly Available Local File System to a Zone Cluster
(clsetup)
- highly available ZFS storage poolsHow to Add a ZFS Storage Pool to a Zone Cluster
(clsetup)
- local file systemsHow to Add a Highly Available Local File System to a Zone Cluster
(CLI)
- local file systems for a specific zone-cluster nodeHow to Add a Local File System to a Specific Zone-Cluster Node
(CLI)
- local ZFS storage poolsHow to Add a Local ZFS Storage Pool to a Specific Zone-Cluster Node
(CLI)
- adding local file systemsAdding Local File Systems to a Specific Zone-Cluster Node
- adding storage devicesAdding Storage Devices to a Zone Cluster
- adding to the private IP-address rangePrivate Network Configuration
- address propertyHow to Create a Zone Cluster (clsetup)
- brand propertyHow to Create a Zone Cluster (clsetup)
- brandsZone Clusters
- capped-cpuHow to Create a Zone Cluster (clsetup)
- configuring to use Trusted ExtensionsHow to Configure a Zone Cluster to Use Trusted Extensions
- dedicated-cpuHow to Create a Zone Cluster (clsetup)
- default IP typeZone-Cluster Requirements and Guidelines
- default routerHow to Create a Zone Cluster (clsetup)
- defrouter propertyHow to Create a Zone Cluster (clsetup)
- enable_priv_net propertyHow to Create a Zone Cluster (clsetup)
- Fair Share Scheduler sharesHow to Create a Zone Cluster (clsetup)
- hostmodel propertyHow to Configure a Zone Cluster to Use Trusted Extensions
- hostname propertyHow to Create a Zone Cluster (clsetup)
- importing zonesImporting Zones into Zone Clusters
- IP strict multihomingHow to Configure a Zone Cluster to Use Trusted Extensions
- ip-type propertyHow to Create a Zone Cluster (clsetup)
- labeled brand optionsHow to Create a Zone Cluster (clsetup)
- lightweight processesHow to Create a Zone Cluster (clsetup)
- locked memoryHow to Create a Zone Cluster (clsetup)
- locked propertyHow to Create a Zone Cluster (clsetup)
- message queue IDsHow to Create a Zone Cluster (clsetup)
- mounting file systems with HAStoragePlusZone-Cluster Requirements and Guidelines
- ncpus propertyHow to Create a Zone Cluster (clsetup)
- num_xip_zoneclusters propertyHow to Create a Zone Cluster (clsetup)
- Oracle ACFS file systemsHow to Create an Oracle ACFS File System
- physical memoryHow to Create a Zone Cluster (clsetup)
- planningZone Clusters
- restrictions
- file-mac-profile propertyZone-Cluster Requirements and Guidelines
- Immutable ZonesZone-Cluster Requirements and Guidelines
- file-mac-profile property
- scope propertyHow to Create a Zone Cluster (clsetup)
- semaphore IDsHow to Create a Zone Cluster (clsetup)
- setting the Global_zone resource-type propertyZone-Cluster Requirements and Guidelines
- shared memoryHow to Create a Zone Cluster (clsetup)
- shared memory IDsHow to Create a Zone Cluster (clsetup)
- software updatesHow to Configure a Zone Cluster to Use Trusted Extensions
- solaris10 brand
- supported versionsHow to Create a Zone Cluster (clsetup)
- zone root passwordHow to Create a Zone Cluster (clsetup)
- supported versions
- solaris10 brand optionsHow to Create a Zone Cluster (clsetup)
- solaris brand optionsHow to Create a Zone Cluster (clsetup)
- swap memoryHow to Create a Zone Cluster (clsetup)
- swap propertyHow to Create a Zone Cluster (clsetup)
- sysid configurationHow to Create a Zone Cluster (clsetup)
- unconfiguringHow to Unconfigure a Zone Cluster
- zonepath propertyHow to Create a Zone Cluster (clsetup)
- adding an Oracle ACFS file system
- zone root password
- solaris10 brand zone clustersHow to Create a Zone Cluster (clsetup)
- solaris10 brand zone clusters
- zonepath propertyHow to Create a Zone Cluster (clsetup)
- zones
- importing into zone clustersImporting Zones into Zone Clusters
- importing into zone clusters
- zoneshare Trusted Extension scriptHow to Install and Configure Trusted Extensions