Configuring Discounts

  1. In the EMC, select the Enterprise, property, or zone, click Configuration and Discounts.
  2. Insert a record for a discount or double-click a record to select it.
  3. On the General tab, select the type of discount from the Activation Type drop-down list:
    • 0 - Manual (Manually entered and applied) from the Activation Type

    • 1 - Automatic (Automatically applied, operator cannot enter)

    • 2 - Coupon (Automatically applied, operator must enter)

  4. If you are configuring a manual discount, enter the following information. Otherwise, skip this step.
    1. If you want to use a percent discount, enter the percentage in the Percent field.
    2. If you want to use an amount discount, enter the maximum amount allowed for the discount in the Max Amount field.
  5. Select Enabled to make the discount available to the workstation operator. (If you configure a temporary discount, you can quickly turn it off.)
  6. Select the Tax Class to be discounted.
  7. Select a Privilege Group to restrict the discount to only employees who are linked to the same privilege group. Set the Privilege Group to 0 to allow all employees to use the discount.
  8. Select the method to determine how condiment menu items are discounted in the Condiment Discountability drop-down list.
  9. Select the Report Group to associate with the discount.
  10. Select the appropriate options for the discount. The following table describes the options and indicates the Activation Types (Manual, Automatic, Coupon) that are available for each option.

    Table 7-8 Discount Options

    Option Description Manual Automatic Coupon

    1 - ON = Open; OFF = Preset

    Select this option if you want to make the discount open.

    The workstation prompts the workstation operator to enter the amount or percentage.

    Yes

    No

    Yes

    2 - ON = Amount; OFF = Percentage

    Select this option if you want to make the discount an amount. Deselect this option if you want the discount to be a percentage.

    Yes

    No

    No

    3 - This is an Item Discount

    Select this option if you want the application to calculate the discount based on the price of the last menu item entered. Deselect this option to calculate the discount based on the discountable transaction subtotal.

    Yes

    Yes

    Yes

    4 - Employee Meal

    Select this option to set the discount as an Employee Discount. The workstation prompts the workstation operator to enter the employee number of the employee receiving the discount.

    Yes

    No

    Yes

    5 - Reference Entry Required

    Select this option to have the workstation operator enter a name or number when using the discount.

    Yes

    No

    Yes

    6 - Validation Required

    Select this option to cause a validation chit to print when the discount is applied.

    Yes

    No

    Yes

    7 - Limit Discount to Value in Amount Field

    Select this option to limit the amount of a discount. Enter an amount in the Amount field, which represents the highest discount possible when setting this option.

    Yes

    No

    Yes

    8 - If No Amount is Entered, Use the Full Discountable Amount

    Select this option to control the open amount discount calculation if the workstation operator does not enter an amount before pressing the discount button. In essence, this option allows you to set a discount as:
    • A 100% discount (if the workstation operator does not enter an amount before selecting the Discount key)

    • An open amount discount (if the workstation operator enters an amount before selecting the Discount key)

    You must select option 2 - ON = Amount; OFF = Percentage to activate this option.

    Yes

    No

    No

    9 - Simple Item Exclusivity

    Select this option to have the discount apply to a menu item. This setting prevents individual items from receiving a discount more than once.

    Yes

    Yes

    Yes

    17 - Item is Shareable

    Select this option to allowing sharing of the discount between two or more seats or checks through TouchEdit or TouchSplit.

    Yes

    No

    No

    18 - Employee Meal Discount Applies to Scheduled Employees Only

    Select this option for properties using timekeeping and only when setting discount option 4 - Employee Meal.

    The discount can be used as an employee meal discount only for employees who are scheduled to work.

    Yes

    No

    Yes

    22 - Employee Meal Discount Applies to Employees On Break Only

    Select this option for properties using timekeeping and only when setting discount option 4 - Employee Meal.

    The discount can be used as an employee meal discount only for employees who are on break.

    Yes

    No

    Yes

    23 - Simple Transaction Exclusivity

    Select this option to have the discount apply to a single check. This setting prevents the check from receiving a discount more than once.

    Yes

    Yes

    Yes

    24 - Discount is Final

    Select this option if you do not want workstation operators to apply additional discounts to the transaction after the discount is posted.

    Yes

    Yes

    Yes

    25 - Discount Combo Meal Group Items

    Select this option to discount combo group menu items when the Allow Discounts option is set for the combo group.

    Yes

    Yes

    No

    28 - Apply to Returned or Direct-Voided Menu Items

    Select this option to allow the discount to be applied to returned and voided items.

    No

    Yes

    Yes

    29 - Menu item to use check open time

    Select this option if you want a menu item to use the check’s open time (instead of using the current time) to determine effectivity of the discount.

    Yes

    Yes

    Yes

    30 - Selected menu item to include parent menu item in discount

    Select this option to include a parent menu item in the discount when the workstation operator selects a child menu item for the discount.

    Yes

    Yes

    Yes

    31 - Net Automatic Service Charge Itemizer

    Select this option if you want the net value of the menu item to post to the Automatic Service Charge Itemizer, reducing the Automatic Service Charge after the discount is applied.

    This option is available when you set option 3 - This is an Item Discount (above) and option 12 - Add to Automatic Service Charge Itemizer in the Menu Item Classes module.

    No

    Yes

    Yes

    32 - Limit Discount value to value of Discountable Item

    Select this option to limit the discountable amount to the item or award when the Amount Off exceeds the item or award. For example, if the Amount Off is $5.00 and the item or award is $4.00, the discount is limited to $4.00.

    Yes

    Yes

    No

    33 - Cash Management Transaction Item

    Select this option to include the discount in Enterprise Cash Management (ECM) tracking and reports.

    Yes

    No

    Yes

  11. Click the RVC Type tab.
  12. Select the revenue centers that can have the discount available.
  13. Click the Effectivity tab.
  14. Select the dates, days and times you want the discount to be in effect.
  15. Click the Effectivity Groups tab.

    The effectivity group configuration allows you to configure and package promotions so that the menu items and their discounts are only available for a fixed period of time.

  16. Click Add Effectivity Record.
  17. Assign discounts, menu item prices, and other configuration elements to the effectivity group.
  18. Click Save.
  19. If you want to set an automatic discount to apply to a revenue center:
    1. Select the revenue center, click Setup and RVC Parameters.
    2. Click the Options tab and select 48 - Enable Automatic Discounts by Default. If you do not select this option, workstation operators must activate automatic discounts per transaction using one of the following function keys:
      • 655 - Auto Discount Toggle – Toggle the automatic discounts for the transaction

      • 656 - Auto Discount Apply – Apply all discounts possible

      • 657 - Auto Discount Remove – Remove all discounts from the transaction

    3. Click Save.

Related Topics