Cable and Transceiver Descriptions
|
|
Transceiver options
(One transceiver required.)
|
|
Copper cable (direct attach) options
(One cable required. No transceiver required.)
|
-
QSFP to 4 SFP+ copper splitter cable: 1 meter
-
QSFP to 4 SFP+ copper splitter cable: 3 meters
-
QSFP to 4 SFP+ copper splitter cable: 5 meters
|
Optical splitter cable length options
(One cable required.)
|
-
MPO to 4 LC optical splitter cable: 10 meters
-
7110603, factory installation
-
X2127A-10M, Multimode, Xoption
-
MPO to 4 LC optical splitter cable: 20 meters
-
7110604, factory installation
-
X2127A-20M, Multimode, Xoption
-
MPO to 4 LC optical splitter cable: 50 meters
-
7110605, factory installation
-
X2127A-50M, Multimode, Xoption
|
|
|
|
Transceiver options
(Two transceivers required.)
|
|
Copper cable (direct attach) options
(No transceiver required. Two cables required.)
|
-
QSFP to QSFP passive copper cable: 1 meter
-
QSFP to QSFP copper cable, 2 meter
-
QSFP to QSFP copper cable, 3 meter
-
QSFP to QSFP copper cable, 5 meter
|
Optical splitter cable length options
(Two cables required.)
|
-
High bandwidth QSFP optical cable: 5 meters, MPO to
MPO
-
High bandwidth QSFP optical cable: 10 meters, MPO to
MPO
-
High bandwidth QSFP optical cable: 20 meters, MPO to
MPO
-
High bandwidth QSFP optical cable: 50 meters, MPO to MPO
(for factory installation)/
-
High bandwidth QSFP optical cable: 100 meters, MPO to
MPO
|
|
|
|
Transceiver options
(Two transceivers required.)
|
|
Cable length options
(Two cables required.)
|
-
Optical cable splitter: 10 meters, MPO/MTP to 2 LC on
ports 3 and 4 OM3
-
Optical cable splitter: 20 meters, MPO/MTP to 2 LC on
ports 3 and 4 OM3
-
Optical cable splitter: 50 meters, MPO/MTP to 2 LC on
ports 3 and 4 OM3
|
|
Note -
If using QSFP to QSFP cables to connect the adapter (configured in 4x10Gb mode) to
a 40GbE switch, ensure that the QSFP ports on the switch are configured
appropriately or support that configuration. Refer to the switch documentation for
any special configurations for the QSFP port to work in the 10GbE mode.
Table 1 Connector and Cable Support For the Different Modes
|
|
|
|
Dual 40GbE mode
|
2x2x10GbE mode
|
4x10GbE mode
|
Port 0 (A)
|
2x40GbE
|
2x10GbE
|
4x10GbE
|
Port 1 (B)
|
2x40GbE
|
2x10GbE
|
|
|
Note -
In the 2x2x10GbE mode, direct-attach copper cables are not supported.
Note -
For the 2x2x10GbE mode, use a Custom 2-way splitter cable which utilizes port C
and D of the MPO/MTP connector. For all other modes, standard industry cables are
supported.