Go to main content

SPARC and Netra SPARC S7-2 Series Servers Administration Guide

Exit Print View

» ...Documentation Home » SPARC S7-2L Server Documentation Library » SPARC and Netra SPARC S7-2 Series Servers ... » Configuring SP and Host Network Addresses » Disable or Enable Network Access to the SP

Updated: June 2017

SPARC and Netra SPARC S7-2 Series Servers Administration Guide

Document Information

Using This Documentation

Understanding System Administration Resources

Accessing the Server

Controlling the Server

Booting and Shutting Down the OS

Configuring Boot and Restart Behavior

Changing Server Identification Information

Configuring Policy Settings

Configuring SP and Host Network Addresses

SP Network Address Options

Disable or Enable Network Access to the SP

Display the SP Network Parameters

Display the Host MAC Address

Connecting to the SP (In-Band)

Matching Devices to Device Names

Managing Server Drives

Monitoring the Server

Updating the Firmware

Language:

Disable or Enable Network Access to the SP

By default, network access to the SP is enabled and DHCP is used to obtain an IP address for the SP. You can disable or enable network access.

At the Oracle ILOM prompt, type:
```
-> set /SP/network state=value
```
where value can be:

enabled

(Default) The SP can be accessed from the network.

disabled

The SP cannot be accessed from the network. You can only use the SER MGT serial connection.

Related Information

Copyright © 2016, 2017, Oracle and/or its affiliates. All rights reserved.