This output is a sample from the OpenBoot command printenv on a SPARC S7-2 server. The output for each server might be different.
{0} ok printenv
Variable Name Value Default Value
ttya-rts-dtr-off false false
ttya-ignore-cd true true
keyboard-layout
reboot-command
security-mode none No default
security-password No default
security-#badlogins 0 No default
verbosity min min
diag-switch? false false
local-mac-address? true true
fcode-debug? false false
scsi-initiator-id 7 7
oem-logo No default
oem-logo? false false
oem-banner No default
oem-banner? false false
ansi-terminal? true true
screen-#columns 80 80
screen-#rows 34 34
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
output-device virtual-console virtual-console
input-device virtual-console virtual-console
auto-boot-on-error? false false
load-base 16384 16384
auto-boot? false true
os-root-device
network-boot-arguments
boot-command boot boot
boot-file
boot-device /pci@300/pci@2/pci@0/pci ... disk net
multipath-boot? false false
boot-device-index 0 0
use-nvramrc? false false
nvramrc
error-reset-recovery boot boot
If any value in the printenv output is truncated, you can see the full entry by typing printenv followed by the variable name. For example:
{0} ok printenv boot-device
boot-device = /pci@302/pci@2/pci@0/pci@17/LSI,sas@0/disk@p2 disk net