Go to main content

Sun Datacenter InfiniBand Switch 36 Product Notes for Firmware Version 2.2

Exit Print View

» ...Documentation Home » Sun Datacenter InfiniBand Switch 36 Firmware ... » Sun Datacenter InfiniBand Switch 36 Product ... » Late-Breaking Information » Software Information and Issues » Infiniband Switch Power Supplies With Part ...

Updated: October 2019

Sun Datacenter InfiniBand Switch 36 Product Notes for Firmware Version 2.2

Document Information

Using This Documentation

Late-Breaking Information

Features and Functionality Documented

General Information and Issues

Snapshot Dataset Information

Software Information and Issues

Partition Configuration Consistency Checking

Infiniband Switch Power Supplies With Part Number 7351491 Require Firmware 2.2.9-3 or Later

IPMI 2.0 is Reenabled After Upgrading From Firmware 2.1 to 2.2

New ifconfig Command

Management Ethernet Port Numbers Used in Firmware Version 2.2

Inactive FIPS Target

Main Board, Management Controller, and Chassis Serial Numbers

High Availability in Partitions

Email Alert Rules

Hardware Information and Issues

Reset Undervoltage Condition

Documentation Information and Issues

Correct Description of the create_ipoib Command

Correct Description of the smsubnetprotection Command

autodisable Command

Upgrade and Downgrade Paths Supported

Firmware Update Guidelines

Determine Management Controller Type

Replace a Switch

Multiple Subnet Managers in a Single Fabric

Upgrading the Switch Firmware

Language:

Infiniband Switch Power Supplies With Part Number 7351491 Require Firmware 2.2.9-3 or Later

Due to a newer FRU format, IB switches produced after March 2018 with power supplies with part number 7351491 must use firmware version 2.2.9 or later.

Copyright © 2019, Oracle and/or its affiliates. All rights reserved.