Table 8. Settings for Configuring a Siebel Application Interface Profile
Setting in Siebel Management Console |
Section (Under Create Profile) |
|
HTTP 1.1-Compliant Firewall / Enable Web Compression |
Basic Information |
Specify that the Siebel Application Interface compresses HTTP traffic. Compressing HTTP traffic, where it is feasible to do so, substantially reduces bandwidth consumption. This feature is supported on HTTP 1.1 and is not supported on HTTP 1.0. For more information about specifying compression, see Siebel Security Guide. |
Configure Fully Qualified Domain Name |
Basic Information |
Specify whether you are using a fully qualified domain name for your Siebel Business Applications. It is strongly recommended to use the fully qualified domain name feature. For more information, see Configuring Siebel Business Applications for Pop-Up Blocker Compatibility. |
Fully Qualified Domain Name |
Basic Information |
Specify the fully qualified domain name for your Siebel Business Applications, such as example.com. It is strongly recommended to use the fully qualified domain name feature. |
Active Session Timeout Value |
Authentication |
Specify the total number of seconds that a session can remain inactive before the user is logged out and the session is closed. Default value: 900 (in seconds) |
Login Session (guest session) Timeout Value |
Authentication |
Specify the timeout value for the login session. Default value: 300 (in seconds) |
Method to Check Server Availability |
Authentication |
Specify the method to use for checking server availability. Default value: HeartBeat |
Command to Check Server Availability |
Authentication |
Specify the command to use for checking server availability. Default value: UpdatePrefMsg |
Session Token Usage Duration |
Authentication |
Specify the usage duration for the session token. Default value: 2880 (in minutes) |
Session Token Timeout Value |
Authentication |
Specify the timeout value for the session token. Default value: 900 (in seconds) |
Configure Web Single Sign-On (Web SSO) |
Authentication |
Specify whether to use Web single sign-on. |
Anonymous User Name |
Authentication |
Specify the Siebel user ID that starts the anonymous session from which an end user is shown the login page for an application. For example: GUESTCST NOTE: Later in profile configuration, you can optionally configure a different anonymous user for individual applications, if you require settings different from the defaults. For example, you might use a different anonymous user for customer applications than for employee applications.
For more information about anonymous users, see Requirements for Configuring Anonymous Users for the Siebel Application Interface. |
Anonymous User Password |
Authentication |
Specify the password for the anonymous user. |
Trust Token |
Authentication This option appears if you select Configure Web Single Sign-On. |
Specify the trust token to use for authentication. |
User Specification |
Authentication |
Specify the user specification to use for authentication. |
Anonymous User Name |
Authentication > REST Inbound Authentication |
Specify the anonymous user to use for REST inbound authentication. For more information, see Siebel REST API Guide. For more information about anonymous users, see Requirements for Configuring Anonymous Users for the Siebel Application Interface. |
Anonymous User Password |
Authentication > REST Inbound Authentication |
Specify the password for the anonymous user for REST inbound authentication. For more information, see Siebel REST API Guide. |
Authentication Type |
Authentication > REST Inbound Authentication |
Specify the authentication type for REST inbound authentication. You can select one of the following options:
- Basic Authentication
- Single Sign-On
- OAuth
For more information, see Siebel REST API Guide. |
Authentication URL |
Authentication > REST Inbound Authentication This option appears if you select the OAuth option. |
Specify the URL to use for REST inbound authentication. For more information, see Siebel REST API Guide. |
Trust Token |
Authentication > REST Inbound Authentication This option appears if you select the Single Sign-On or OAuth option. |
Specify the trust token to use for REST inbound authentication. For more information, see Siebel REST API Guide. |
User Specification |
Authentication > REST Inbound Authentication This option appears if you select the Single Sign-On option. |
Specify the user specification to use for REST inbound authentication. For more information, see Siebel REST API Guide. |
Session Timeout (seconds) |
Authentication > REST Inbound Authentication |
Specify the session timeout, in seconds, to use for REST inbound authentication. For more information, see Siebel REST API Guide. |
Secure Channel |
Authentication > REST Inbound Authentication |
Specify whether to use a secure channel. For more information, see Siebel REST API Guide. |
User Interface Log Level |
Logging |
Specify the user interface logging level. Select one of the following options: Fatal, Error (default), Warning, Debug, Trace, Information, All |
EAI Log Level |
Logging |
Specify the EAI logging level. Select one of the following options: Fatal, Error, Warning, Debug, Trace, Information, All |
DAV Log Level |
Logging |
Specify the DAV logging level. Select one of the following options: Fatal, Error (default), Warning, Debug, Trace, Information, All |
REST Outbound Log Level |
Logging |
Specify the REST outbound logging level. Select one of the following options: Fatal, Error (default), Warning, Debug, Trace, Information, All |
REST Inbound Log Level |
Logging |
Specify the REST inbound logging level. Select one of the following options: Fatal, Error (default), Warning, Debug, Trace, Information, All |
SOAP Outbound Log Level |
Logging |
Specify the SOAP outbound logging level. Select one of the following options: Fatal, Error (default), Warning, Debug, Trace, Information, All |
Object Manager |
REST Inbound Defaults |
Select the Object Manager component to use for REST inbound communications, such as EAI Object Manager. For more information, see Siebel REST API Guide. |
REST Response Base URL |
REST Inbound Defaults |
Specify the base URL for a REST response. For more information, see Siebel REST API Guide. |
Maximum Possible Connections |
REST Inbound Defaults |
Specify the maximum number of possible connections. Default value: 20 For more information, see Siebel REST API Guide. |
Minimum Possible Connections |
REST Inbound Defaults |
Specify the minimum number of connections in the pool, as a percentage of the maximum. Default value: 25 For more information, see Siebel REST API Guide. |
Method Name |
REST Inbound Defaults > REST Resource Parameter List > Query |
Specify the method name to use for queries. For more information, see Siebel REST API Guide. |
Name |
REST Inbound Defaults > REST Resource Parameter List > Query > Parameter List |
Specify the name for each query parameter. For more information, see Siebel REST API Guide. |
Alias |
REST Inbound Defaults > REST Resource Parameter List > Query > Parameter List |
Specify the alias for each query parameter. For more information, see Siebel REST API Guide. |
Application Name |
Applications > Language > Basic Information |
Specify an application to configure for this instance of Siebel Application Interface, for each specified language. |
Object Manager |
Applications > Language > Basic Information |
Specify the Object Manager component for the selected application. |
Language |
Applications > Language > Basic Information |
Displays the language for the selected application. |
Request Start Command |
Applications > Language > Basic Information |
Specify the request start command for the selected application. |
Configure EAI HTTP Inbound Transport |
Applications > Language > Basic Information |
Specify whether to configure the EAI HTTP Inbound Transport. Choose this option for EAI applications only, and not for any other applications. |
Configure Anonymous Pool |
Applications > Language > Basic Information This option appears if you select Configure EAI HTTP Inbound Transport. |
Specify whether to configure the anonymous pool for EAI requests. |
Anonymous Pool Size |
Applications > Language > Basic Information This option appears if you select Configure EAI HTTP Inbound Transport and Configure Anonymous Pool. |
Specify the size of the anonymous pool for EAI requests. |
Maximum Retry for Processing EAI-SOAP Request |
Applications > Language > Basic Information This option appears if you select Configure EAI HTTP Inbound Transport. |
Specify the maximum number of retries for processing SOAP requests for EAI. |
No Session Preference in EAI-SOAP |
Applications > Language > Basic Information This option appears if you select Configure EAI HTTP Inbound Transport. |
Specify whether the session preference is required in EAI-SOAP. |
Configure Siebel Mobile |
Applications > Language > Mobile |
Specify whether to configure Siebel Mobile applications. |
Application Display Name |
Applications > Language > Mobile This option appears if you select Configure Siebel Mobile. |
Specify the display name of the Siebel Mobile application. |
Application Display Order |
Applications > Language > Mobile This option appears if you select Configure Siebel Mobile. |
Specify the display order of the Siebel Mobile application. |
Application Icon Name |
Applications > Language > Mobile This option appears if you select Configure Siebel Mobile. |
Specify the icon name of the Siebel Mobile application. |
Active Session Timeout Value |
Applications > Language > Enhanced Authentication NOTE: Use the Enhanced Authentication settings to optionally configure authentication for individual applications, if you require override settings different from the defaults specified under Basic Information and Authentication.
|
Specify the total number of seconds that a session can remain inactive before the user is logged out and the session is closed. Default value: 900 (in seconds) |
Login Session (guest session) Timeout Value |
Applications > Language > Enhanced Authentication |
Specify the timeout value for the login session. Default value: 300 (in seconds) |
Method to Check Server Availability |
Applications > Language > Enhanced Authentication |
Specify the method to use for checking server availability. Default value: HeartBeat |
Command to Check Server Availability |
Applications > Language > Enhanced Authentication |
Specify the command to use for checking server availability. Default value: UpdatePrefMsg |
Session Token Usage Duration |
Applications > Language > Enhanced Authentication |
Specify the usage duration for the session token. Default value: 2880 (in minutes) |
Session Token Timeout Value |
Applications > Language > Enhanced Authentication |
Specify the timeout value for the session token. Default value: 900 (in seconds) |
Configure Web Single Sign-On (Web SSO) |
Applications > Language > Enhanced Authentication |
Specify whether to use Web single sign-on. |
Anonymous User Name |
Applications > Language > Enhanced Authentication |
Specify the Siebel user name that starts the anonymous session for the specified application. For example: GUESTCST For more information about anonymous users, see Requirements for Configuring Anonymous Users for the Siebel Application Interface. |
Anonymous User Password |
Applications > Language > Enhanced Authentication |
Specify the password for the anonymous user. |
Language |
Other Information > SWE |
Provide the default language of Siebel Business Applications. |
HTTP-POST Request Size |
Other Information > SWE |
Specify the maximum size, in bytes, of HTTP POST requests from the Siebel Application Interface. |
Seed File Location |
Other Information > SWE |
Specify the location of the seed file. (This setting is available for future use.) |
Monitor Sessions |
Other Information > SWE |
Specify whether to determine whether to gather statistics on all of the current sessions and report them in the Siebel Application Interface statistics page. |
Collect Application-Specific Statistics |
Other Information > SWE |
Specify whether to enable the collection of application-specific statistics. |
Siebel Application Interface Profile Name |
Not applicable |
By default, this location is the admin/Webserver directory under the home directory of the installed Siebel Enterprise Server component (such as Siebel Gateway). For example, for Siebel CRM version 17.0 on UNIX, the default Siebel Application Interface profile location is /siebel/17.0.0.0.0/ses/gtwysrvr/admin/Webserver . You specify this location later when you configure the Siebel Application Interface, as described in Deploying the Siebel Application Interface. |