Go to main content

Oracle® Server X8-2L Service Manual

Exit Print View

Updated: October 2019
 
 

Remove a PCIe Card


Note -  PCIe slots 1 through 5 are nonfunctional in single-processor systems.

Note -  Prior to replacing or installing a PCIe card, refer to the card documentation for specific installation and cabling instructions.
  1. Prepare the server for service.
    1. Power off the server and disconnect the power cords from the power supplies.

      See Powering Down the Server.

    2. Extend the server to the maintenance position.

      See Extend the Server to the Maintenance Position.

    3. Attach an antistatic wrist strap.

      See Take Antistatic Measures.

    4. Remove the server top cover.

      See Remove the Server Top Cover.

  2. Locate the PCIe card that you want to remove.

    See PCIe Slot Locations.

  3. If necessary, record where the PCIe cards are installed.
  4. Unplug all data cables from the PCIe card [1].

    Note the cable connections in order to ease proper reconnection of the cables.

  5. Rotate the PCIe card locking mechanism in to an upright position [1], and then lift up on the PCIe card to disengage it from the motherboard connectors [2].
    image:Figure showing a PCIe card being removed from the server.
  6. Place the PCIe card on an antistatic mat.

    Caution

    Caution  -  If you are not immediately inserting a replacement PCIe card into the empty slot, insert a PCIe filler panel in the slot to reduce the possibility of radiated electromagnetic interference (EMI). See Remove and Install Filler Panels.


Related Information