Perform tasks for servicing customer-replaceable units (CRUs) for the Oracle Database Appliance that require you to power off the server node.
All Oracle Database Appliance CRUs are located in the server nodes.
Note:
The servicing of hot-plug components such as the HDDs, SDDs, power supplies, and fans is described in Servicing CRUs That Do Not Require System Power Off.
This section describes how to perform CRU service tasks requiring system power off for Oracle Database Appliance X7 series system.
If you have Oracle Database Appliance X6-2 series, go to Servicing Oracle Database Appliance X6-2 Series CRUs. If you have Oracle Database Appliance X3-2/X4-2/X5-2, go to Servicing Oracle Database Appliance X3-2/X4-2/X5-2 CRUs. If you have Oracle Database Appliance Version 1, go to Servicing Oracle Database Appliance Version 1 CRUs.
Note:
When adding DIMMs to the system, refer to the "Optional Component Installation" section in the Owner's Guide for supported configurations.
This section describes how to service customer-replaceable units (CRUs) that require you to power off the server.
Note:
For the Oracle Database Appliance X7-2-HA, all of the CRUs on the storage shelf and the storage expansion shelf can be replaced while the power is on. See Oracle Database Appliance X3-2/X4-2/X5-2 and X6-2-HA/X7-2-HA Storage Shelf Hot-Pluggable Components for storage shelf component replacement procedures.
Note:
The links in the following table take you to instructions outside of the Oracle Database Appliance library to the Oracle Server X7-2 documentation library. Use your browser's Back button to return to the Oracle Database Appliance library.
| Oracle Database Appliance X7-2S/X7-2M | Oracle Database Appliance X7-2-HA |
|---|---|
Parent topic: Servicing CRUs That Require Server Node Power Off
This section describes how to perform CRU service tasks requiring system power off for Oracle Database Appliance X6 series system.
If you have Oracle Database Appliance X7-2 series, go to Servicing Oracle Database Appliance X7-2 Series CRUs. If you have Oracle Database Appliance X3-2/X4-2/X5-2, go to Servicing Oracle Database Appliance X3-2/X4-2/X5-2 CRUs. If you have Oracle Database Appliance Version 1, go to Servicing Oracle Database Appliance Version 1 CRUs.
Note:
When adding DIMMs to the system, refer to the "Optional Component Installation" section in the Owner's Guide for supported configurations.
This section describes how to service customer-replaceable units (CRUs) that require you to power off the server.
Note:
For the Oracle Database Appliance X6-2-HA, all of the CRUs on the storage shelf and the storage expansion shelf can be replaced while the power is on. See Oracle Database Appliance X3-2/X4-2/X5-2 and X6-2-HA/X7-2-HA Storage Shelf Hot-Pluggable Components for storage shelf component replacement procedures.
Note:
The links in the following table take you to instructions outside of the Oracle Database Appliance library to the Oracle Server X6-2 and Oracle Server X6-2L (including Storage Server X6-2 Extreme Flash version) documentation libraries. Use your browser's Back button to return to the Oracle Database Appliance library.
| Oracle Database Appliance X6-2S/X6-2M | Oracle Database Appliance X6-2L | Oracle Database Appliance X6-2-HA |
|---|---|---|
|
This system does not have PCIe risers. |
||
Parent topic: Servicing CRUs That Require Server Node Power Off
This section describes how to perform CRU service tasks requiring system power off for Oracle Database Appliance X3-2/X4-2/X5-2 system.
If you have Oracle Database Appliance X7-2 series, go to Servicing Oracle Database Appliance X7-2 Series CRUs. If you have Oracle Database Appliance X6-2 series, go to Servicing Oracle Database Appliance X6-2 Series CRUs. If you have Oracle Database Appliance Version 1, go to Servicing Oracle Database Appliance Version 1 CRUs.
Note:
When adding DIMMs to the system, refer to the "Optional Component Installation" section in the Owner's Guide for supported configurations.
This section describes how to service customer-replaceable units (CRUs) that require you to power off the server.
Note:
All of the CRUs on the storage shelf and the storage expansion shelf can be replaced while the power is on. See Oracle Database Appliance X3-2/X4-2/X5-2 and X6-2-HA/X7-2-HA Storage Shelf Hot-Pluggable Components for storage shelf component replacement procedures.
Note:
The links in the following table take you to instructions outside of the Oracle Database Appliance library to the Sun Server X3-2, Sun Server X4-2, and Oracle Server X5-2 documentation libraries. Use your browser's Back button to return to the Oracle Database Appliance library.
| Oracle Database Appliance X3-2 | Oracle Database Appliance X4-2 | Oracle Database Appliance X5-2 |
|---|---|---|
|
An optional DVD drive for this system is considered a FRU. See Servicing Oracle Database Appliance X3-2/X4-2/X5-2 FRUs. |
||
|
This system does not include an internal USB flash drive. |
Servicing the Internal USB Flash Drives (CRU) Note that a factory installed flash drive is reserved for future use. |
Servicing the Internal USB Flash Drives (CRU) Note that a factory installed flash drive is reserved for future use. |
Parent topic: Servicing CRUs That Require Server Node Power Off
This section describes how to perform CRU service tasks requiring system power off for Oracle Database Appliance Version 1 system.
If you have Oracle Database Appliance X7-2 series, go to Servicing Oracle Database Appliance X7-2 Series CRUs. If you have Oracle Database Appliance X6-2 series, go to Servicing Oracle Database Appliance X6-2 Series CRUs. If you have Oracle Database Appliance X3-2/X4-2/X5-2, go to Servicing Oracle Database Appliance X3-2/X4-2/X5-2 CRUs.
This section includes information on how to service the following Oracle Database Appliance Version 1 CRUs:
Parent topic: Servicing CRUs That Require Server Node Power Off