해당 NET MGT 포트를 통해 SP에 연결하려면 SP에 유효한 IP 주소가 포함되어야 합니다.
기본적으로 서버는 네트워크의 DHCP에서 IP 주소를 얻도록 구성되어 있습니다. 서버가 연결된 네트워크에서 IP 주소 지정에 DHCP를 지원하지 않는 경우 이 절차를 수행합니다.
-> set /SP/network pendingipdiscovery=static Set 'pendingipdiscovery' to 'static'
->set /SP/network pendingipaddress=service-processor-IPaddr Set 'pendingipaddress' to 'service-processor-IPaddr'
기본 IPv6 DHCP 등록 정보를 변경하고 정적 IPv6 주소에 대한 등록 정보 값을 설정하려면 Oracle ILOM 구성 및 유지 관리를 위한 관리자 설명서의 기본 연결 구성 등록 정보 수정 절을 참조하십시오.
-> set /SP/network pendingipgateway=gateway-IPaddr Set 'pendingipgateway' to 'gateway-IPaddr'
-> set /SP/network pendingipnetmask=255.255.255.0 Set 'pendingipnetmask' to '255.255.255.0'
이 예에서는 255.255.255.0을 사용하여 넷마스크를 설정합니다. 사용 중인 네트워크 환경 서브넷에서는 다른 넷마스크가 필요할 수도 있습니다. 사용자 환경에 가장 적합한 넷마스크 번호를 사용합니다.
-> show /SP/network /SP/network Targets: Properties: commitpending = (Cannot show property) dhcp_clientid = xxx.xxx.xxx.xxx dhcp_server_ip = xxx.xxx.xxx.xxx ipaddress = xxx.xxx.xxx.xxx ipdiscovery = dhcp ipgateway = xxx.xxx.xxx.xxx ipnetmask = 255.255.255.0 macaddress = xx:xx:xx:xx:xx:xx managementport = MGMT outofbandmacaddress = xx:xx:xx:xx:xx:xx pendingipaddress = service-processor-IPaddr pendingipdiscovery = static pendingipgateway = gateway-IPaddr pendingipnetmask = 255.255.255.0 pendingmanagementport = MGMT sidebandmacaddress = xx:xx:xx:xx:xx:xx state = enabled
-> set /SP/network commitpending=true Set 'commitpending' to 'true'