ACLI Configuration

To configure a session timer profile object:

1. In Superuser mode, type configure terminal and press Enter.

   ORACLE# configure terminal
   ORACLE(configure)#

2. Type session-router and press Enter.

   ORACLE(configure)# session-router
   ORACLE(session-router)#

3. Type session-timer-profile and press Enter. The system prompt changes to let you know that you can begin configuring individual parameters.

   ORACLE(session-router)# session-timer-profile
   ORACLE(session-timer-profile)#

4. name—Enter a name for this session timer profile.
5. session-expires—Enter the session timer value in seconds you wish this object to use natively.
6. min-se—Enter the minimum session timer value in seconds for this object.
7. force-reinvite—Leave the default of enabled for the Oracle Communications Session Border Controller to always use reINVITEs for session refreshes. Set this parameter to disabled for the Oracle Communications Session Border Controller to try using UPDATEs for session refreshes.
8. request-refresher—Set this to the value to insert in the refresher parameter in the Session-Expires: header on the originating call leg that the Oracle Communications Session Border Controller includes in the 200 OK response message. Valid values are uac and uas.
9. response-refresher—Set this to the value to insert in the refresher parameter in the Session-Expires: header on the terminating call leg that the Oracle Communications Session Border Controller includes in the INVITE message. Valid values are uac, uas, none.
10. Type done to save your work and continue.

    To apply a session timer profile to a SIP interface:

11. In Superuser mode, type configure terminal and press Enter.

    ORACLE# configure terminal
    ORACLE(configure)#

12. Type session-router and press Enter.

    ORACLE(configure)# session-router
    ORACLE(session-router)#

13. Type sip-interface and press Enter.

    ORACLE(session-router)# sip-interface
    ORACLE(sip-interface)#

    If you are adding this feature to an existing configuration, then you will need to select the configuration you want to edit.

14. session-timer-profile—Enter the name of a session timer profile object you have configured and want applied to this SIP interface.
15. Type done to save your work and continue.