Search for a Report Record

The Search button at the top of the report page allows you to find a specific record within a Monitor and Trace report. It also allows you to specify criteria on which to perform the search.

You can specify a value for any or all of the fields in the Search box. The search process searches for records with all of the values you specify and displays only the records with these values. If you perform a Global Search and specify values in other fields, the search process searches the other specified fields first and then filters on the Global Search field.

If you specify a “*” in a search string, the search is performed on that exact string. For example, if you search for “123*45”, the search shows results for all strings containing “123*45”.
You can use quotes (“ “) to specify a search. For example, you can enter Smith and the search finds all of the records that match Smith, such as: John Smithfield<sip:sipp@192.168.1.70:5070>;tag=12260SIPpTag001.
If you enter a space before or after a quotation mark, (for example, “Smith “), the search returns no data.

On any reports page, click Search and do the following in the Search Filter dialog.

Global Search—Search all parameters in all records.

Enter the URI formatted string of the call source information you are searching. Valid values are alpha-numeric characters. For example, sipp<sip:sipp@172.16.34.10:5060;tag=24.

From URI—Search on the From-URI header.

Enter the URI formatted string that contains a protocol, name, location, or any other applicable characteristic, that is sent by the E-SBC in the REQUEST header. Valid values are alpha-numeric characters. For example, sip:service@172.16.34.226:5060.

Request URI—Search on the Request-URI header.

To URI—Search on the To-URI header.

Enter URI formatted string of the call destination information you are searching. Valid values are alpha-numeric characters. For example, sut<sip:service@172.16.34.226:5060;tag=99.

Start Date— Search from messages that start at the specified date and time.

Enter a starting date to search on in the first text box in the format YYYY-MM-DD (where Y =year, M=month, and D=day). For example, 2012-04-15 would search for all records starting on April 15, 2012. Valid values are numeric characters only.
Enter a start time to search on in the last three text boxes in the format HH mm ss (where H=hour, m=minutes, and s=seconds). For example, 01 30 45 would search for all records starting at 1:30 and 45 seconds. Valid value are numeric characters only.

End Date—Search from messages that end at the specified date and time.

Enter an end date to search on in the first text box in the format YYYY-MM-DD (where Y =year, M=month, and D=day). For example, 2012-04-15 would search for all records starting on April 15, 2012. Valid values are numeric characters only.
Enter an end time to search on in the last three text boxes in the format HH mm ss (where H=hour, m=minutes, and s=seconds). For example, 01 30 45 would search for all records starting at 1:30 and 45 seconds. Valid value are numeric characters only.

Session ID—Search on the monitored SIP session ID, as shown in the Summary table.

Enter the ID of the call session you want to search. Valid values are alpha-numeric characters. For example, 22-3412@172.16.34.1.

In Call ID—Search on the SIP call ID of the initial received request.

Enter the ID of the incoming call (phone number and source IP address). Valid values are alpha-numeric characters. For example, 25-3412@172.16.34.10.

Out Call ID—Search on the SIP call ID of the first routed request.

Enter the ID of the outgoing call (phone number and IP address). Valid values are alpha-numeric characters. For example, 14-3412@172.14.54.6.

State (with result code)—Search on the state of the call, as shown in the Summary table.

Enter the status of the call session with the result code for which you want to search. Result codes can range from 1xx to 5xx. For example, terminated-200, or failed-400. Case-sensitive. Valid values include:

INITIAL-<result code>
EARLY-<result code>
ESTABLISHED-<result code>
TERMINATED-<result code>
FAILED-<result code>

Notable Event—Search on a notable event type that you select from the drop-down list.

Select the notable event for which you want to search. Valid values include:

any-event - search displays any notable event that was stored in memory.
hort-session - search displays only records that indicate a short-session duration has occurred.
local-rejection - search displays only records that indicate a local-rejection has occurred.

In Realm—Search the realm from which the initial request was received.

Enter the name of the realm for which the incoming call belongs. Valid values are alpha-numeric characters. For example, access.

Out realm—Search the realm to which the first routed request was sent.

Enter the name of the realm for which the outgoing call belongs. Valid values are alpha-numeric characters. For example, backbone.

In SA—Search on the name of the session agent from which the initial request was received.

Enter the name of the session agent (SA) on the incoming call session. Valid values are alpha-numeric characters. For example, SA1.

Out SA—Search on the realm to which the first routed request was sent.

Enter the name of the session agent (SA) on the outgoing call session. Valid values are alpha-numeric characters. For example, SA2.

In Source Addr—Search on the IP address from which the initial request was received.

Enter the source IP address of the SA that accepted the incoming call session. IP Address must be entered in dotted decimal format (0.0.0.0). For example, 172.45.6.7.

Out Dest Addr—Search on the IP address to which the initial request was sent.

Enter the destination IP address of the SA that accepted the outgoing call session. IP Address must be entered in dotted decimal format (0.0.0.0). For example, 172.64.56.7.

In Network Interface—Search on the IP address on which the initialƒ request was received.

Enter the incoming core network interface that connects the Net-Net ECB to your network. IP Address must be entered in dotted decimal format (0.0.0.0). For example, 192.45.6.7.

Out Network Interface—Search on the IP address that was the source for the routed request.

Enter the outgoing network interface that connects your Net-Net ECB to the outside network. IP Address must be entered in dotted decimal format (0.0.0.0). For example, 192.45.6.8.

Click Search.