Communication Name: Enter the name to use when communicating with the interface.
Interface Type: Select 0 - PMS/SIM.
Communication Type: Select the communication type that the interface uses.
Timeout: Enter 30.
Ping Frequency: Set to 0 (zero) to avoid double posting.
Figure 55-8 Interface Module
Do not enable option 8, as it causes double posting.
Figure 55-9 Interface Module’s Options Tab
TCP Host Name: Enter the OPERA PMS application server’s IP address or server name (if DNS is enabled).
Port Number: Enter the port number for the OPERA PMS server.
Figure 55-10 Interface Module’s Properties Tab
You can assign any workstation that has enough power to handle the incoming queries as the service host.
This configuration typically occurs at the property level when the PMS interface is on-premises.
Figure 55-11 Extension Application PMS Interface Assignment