sg_reset_wp - send SCSI RESET WRITE POINTER command
sg_reset_wp [--all] [--count=ZC] [--help] [--verbose] [--version] [--zone=ID] DEVICE
SG_RESET_WP(8) SG3_UTILS SG_RESET_WP(8)
NAME
sg_reset_wp - send SCSI RESET WRITE POINTER command
SYNOPSIS
sg_reset_wp [--all] [--count=ZC] [--help] [--verbose] [--version]
[--zone=ID] DEVICE
DESCRIPTION
Sends a SCSI RESET WRITE POINTER command to the DEVICE. This command is
found in the soon to be released ZBC standard (draft prior to standard:
zbc-r05.pdf).
OPTIONS
Arguments to long options are mandatory for short options as well.
-a, --all
sets the ALL field in the cdb. This causes a reset write pointer
operation of all open zones and full zones. When this option is
given then the --zone=ID option is ignored. Either this option
or the --zone=ID option is required.
-C, --count=ZC
ZC is placed in the Zone Count field in the cdb of the RESET
WRITE POINTER command supported by this utility. ZC should be a
value from 0 to 65535 (0xffff) inclusive.
-h, --help
output the usage message then exit.
-v, --verbose
increase the level of verbosity, (i.e. debug output).
-V, --version
print the version string and then exit.
-z, --zone=ID
where ID is placed in the cdb's ZONE ID field. A zone id is a
zone start logical block address (LBA). This causes a reset
write pointer operation on the zone identified by the ZONE ID
field. The default value is 0. Either this option or the --all
option is required. ID is assumed to be in decimal unless pre-
fixed with '0x' or has a trailing 'h' which indicate hexadeci-
mal.
EXIT STATUS
The exit status of sg_reset_wp is 0 when it is successful. Otherwise
see the sg3_utils(8) man page.
AUTHORS
Written by Douglas Gilbert.
REPORTING BUGS
Report bugs to <dgilbert at interlog dot com>.
COPYRIGHT
Copyright (C) 2014-2018 Douglas Gilbert
This software is distributed under a FreeBSD license. There is NO war-
ranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
POSE.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
+---------------+--------------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+--------------------------+
|Availability | system/storage/sg3_utils |
+---------------+--------------------------+
|Stability | Pass-through uncommitted |
+---------------+--------------------------+
SEE ALSO
sg_rep_zones,sg_zone(sg3_utils)
NOTES
Source code for open source software components in Oracle Solaris can
be found at https://www.oracle.com/downloads/opensource/solaris-source-
code-downloads.html.
This software was built from source available at
https://github.com/oracle/solaris-userland. The original community
source was downloaded from http://sg.danny.cz/sg/p/sg3_utils-1.46.tgz.
Further information about this software can be found on the open source
community website at http://sg.danny.cz/sg/sg3_utils.html.
sg3_utils-1.43 May 2018 SG_RESET_WP(8)