4 Oracle Database Applianceベアメタル・システムのプロビジョニング
Oracle Database Applianceベアメタル・システムを構成するプロセスを理解します。
Webコンソールは、ベアメタル・プラットフォーム構成をデプロイするために優先されるメソッドです。 Webコンソールでは、システム、ネットワーク、データベースおよびOracle Auto Service Request (Oracle ASR)の構成など、Oracle Database Applianceのプロビジョニングに必要なフィールドがすべて提供されます。 コマンドライン・インタフェースを使用する場合は、JSONファイルを作成してデプロイメント・オプションを構成する必要があります。
- 「ネットワークの配線」
ノードにパブリック・インターネット・プロトコル(IP)情報が割り当てられたOracle Database Applianceネットワークをプラムして、Oracle Database Applianceソフトウェアのアップロードを可能にします。 - 「配線とネットワーク接続の確認」
Oracle Database Applianceの電源を入れたあと、ネットワーク接続が正しく設定されていることを確認します。 - 「Oracle Database Applianceソフトウェアのダウンロード」
アプライアンスに更新を適用する前に、Oracle Database Applianceソフトウェアをダウンロードして一時的なロケーションにコピーします。 - 「Oracle Database Applianceソフトウェアのインストール」
アプライアンスを作成する前に、Oracle Database Applianceソフトウェアをインストールします。 - 「アプライアンスの作成」
Webコンソールを使用してアプライアンスを作成します。
ネットワークの配線
ノードにパブリック・インターネット・プロトコル(IP)情報が割り当てられたOracle Database Applianceネットワークをプラムして、Oracle Database Applianceソフトウェアのアップロードを可能にします。
例4-1 結合構成の例
結合された構成の場合は、結合パブリック・インタフェースを使用してyesに応答し、DHCPを構成しないでbtbond1
インタフェースを使用するように最初のネットワークを構成します。
# /opt/oracle/dcs/bin/odacli configure-firstnet
Using bonding public interface (yes/no) [yes]: yes
Select the Interface to configure the network on (btbond1): btbond1
Configure DHCP on btbond1 (yes/no): no
INFO: You have chosen Static configuration
Enter the IP address to configure: 10.1.10.2
Enter the Netmask address to configure: 255.255.255.0
Enter the Gateway address to configure: 10.1.10.1
INFO: Plumbing the IPs now
INFO: Restarting the network
Shutting down interface btbond1: bonding: btbond1: Removing slave em2.
bonding: btbond1: releasing active interface em2
bonding: btbond1: making interface em3 the new active one.
bonding: btbond1: Removing slave em3.
bonding: btbond1: releasing active interface em3
::::::::::
例4-2 非結合構成の例
非結合構成を作成してVLAN機能を無効にするには、no
と回答して結合パブリック・インタフェースを使用します。
# /opt/oracle/dcs/bin/odacli configure-firstnet
Using bonding public interface (yes/no) [yes]: no
INFO: Breaking the bonding on btbond1
INFO: remove bonding module: rmmod bonding
INFO: remove slave setup in /etc/sysconfig/network-scripts/ifcfg-em2
INFO: remove slave setup in /etc/sysconfig/network-scripts/ifcfg-em3
INFO: Restarting the network
Shutting down interface em1: [ OK ]
Shutting down interface p1p1: [ OK ]
Shutting down interface p1p2: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface em1: [ OK ]
Bringing up interface em2: [ OK ]
Bringing up interface em3: [ OK ]
Bringing up interface p1p1:
Determining if ip address 192.168.16.24 is already in use for device p1p1...
[ OK ]
Bringing up interface p1p2:
Determining if ip address 192.168.17.24 is already in use for device p1p2...
[ OK ]
INFO: Restarting the network
Select the Interface to configure the network on (em2 em3) [em2]:
Configure DHCP on em2 (yes/no) [no]:
INFO: You have chosen Static configuration
Enter the IP address to configure : 10.1.10.2
Enter the Netmask address to configure : 255.255.255.0
Enter the Gateway address to configure[10.1.10.1] :
INFO: Plumbing the IPs now
/usr/share/system-config-network/netconfpkg/NCHostsList.py:100:
DeprecationWarning: BaseException.message has been deprecated as of Python 2.6
badlines.append((num, value_exception.message))
/usr/share/system-config-network/netconfpkg/NCHostsList.py:105:
DeprecationWarning: BaseException.message has been deprecated as of Python 2.6
""" % (value_exception.message, num)
/usr/share/system-config-network/netconfpkg/NCProfileList.py:142:
DeprecationWarning: BaseException.message has been deprecated as of Python 2.6
self.error = e.message
INFO: Restarting the network
Shutting down interface em1: [ OK ]
Shutting down interface em2: [ OK ]
Shutting down interface em3: [ OK ]
Shutting down interface p1p1: [ OK ]
Shutting down interface p1p2: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface em1: [ OK ]
Bringing up interface em2:
Determining if ip address 10.1.10.2 is already in use for device em2...
[ OK ]
Bringing up interface em3: [ OK ]
Bringing up interface p1p1:
Determining if ip address 192.0.2.24 is already in use for device p1p1...
[ OK ]
Bringing up interface p1p2:
Determining if ip address 192.0.2.25 is already in use for device p1p2...
[ OK ]
例4-3 VLANの構成の例
# /opt/oracle/dcs/bin/odacli configure-firstnet
Using bonding public interface (yes/no) [yes]:
Select the Interface to configure the network on (btbond1) [btbond1]:
Configure DHCP on btbond1 (yes/no) [no]:
INFO: You have chosen Static configuration
Use VLAN on btbond1 (yes/no) [no]:yes
Configure VLAN on btbond1, input VLAN ID [2 - 4094] 122
INFO: using network interface btbond1.122
Enter the IP address to configure : 192.0.2.24
Enter the Netmask address to configure : 192.0.2.24
Enter the Gateway address to configure[192.0.2.24] :
INFO: Restarting the network
Shutting down interface btbond1: [ OK ]
Shutting down interface em1: [ OK ]
Shutting down interface p1p1: [ OK ]
Shutting down interface p1p2: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface btbond1:
Determining if ip address 192.0.2.24 is already in use for device btbond1...
[ OK ]
Bringing up interface em1: [ OK ]
Bringing up interface p1p1:
Determining if ip address 192.0.2.24 is already in use for device p1p1... [ OK ]
Bringing up interface p1p2:
Determining if ip address 192.0.2.24 is already in use for device p1p2...
[ OK ]
Bringing up interface btbond1.122:
Determining if ip address 192.0.2.24 is already in use for device btbond1.122...
[ OK
INFO: Restarting the DCS agent
initdcsagent stop/waiting
initdcsagent start/running, process 32104
配線とネットワーク接続の確認
Oracle Database Applianceの電源を入れたあと、ネットワーク接続が正しく設定されていることを確認します。
Oracle Database Applianceソフトウェアのダウンロード
アプライアンスに更新を適用する前に、Oracle Database Applianceソフトウェアをダウンロードして一時的なロケーションにコピーします。
Oracle Database Applianceソフトウェアのインストール
アプライアンスを作成する前に、Oracle Database Applianceソフトウェアをインストールします。
アプライアンスの作成
Webコンソールを使用してアプライアンスを作成します。
デプロイメント後、root
とデータベース・ユーザーSYS
、SYSTEM
およびPDBADMIN
はシステム・パスワードに設定されます。 oracle
とgrid
のパスワードはデフォルトのパスワードに設定されています。 これらのパスワードをユーザー・セキュリティ・プロトコルに従うように変更します。