6000000000000400 - Automatic RTDB Backup failed

The RTDB backup failed because of at least one of the following conditions:

• The mate machine is not reachable.

• Automatic RTDB Backup file transfer to the Mate failed.

• Unable to connect to Remote host IP Address for Automatic RTDB Backup.

• Automatic RTDB Backup file transfer to the Remote failed.

• The incorrect login or password configured for Automatic RTDB Backup.

• The destination path does not exist in remote machine IP Address for Automatic RTDB Backup.

To verify the exact failure condition, refer to the error string in the log file.

Note:

This alarm will clear if the Automatic PDB/RTDB backup executes successfully during the next scheduled backup time.

Recovery

To clear this alarm immediately, cancel the Automatic PDB / RTDB backup in the EPAP GUI as described in 1 through 4.

Note:

Automatic PDB/RTDB Backup will have to be rescheduled if it is cancelled.

1. Log in to the User Interface screen of the EPAP GUI (see Accessing the EPAP GUI).
2. From the menu, select Maintenance>Automatic PDB/RTDB Backup to display the Automatic PDB/RTDB Backup screen.
3. From the Automatic PDB/RTDB Backup screen, select None as the Backup Type.
4. Select the Schedule Backup button to complete the cancellation. Automatic PDB/RTDB Backup will have to be rescheduled. Refer to Administration Guide to reschedule the Automatic PDB/RTDB Backup.