Configuring the ISR for Recording a Call

You can place a call to verify that the ISR call recording functionality is working properly. Before you can place a call, you must configure the following on the ISR:

• Add a new site for the RSS server
• Add a new RSS to the site
• Add a Route

Add Site for RSS Server

To verify that the RSS and the dashboard are communicating, you must add a new site for the RSS server. Use the following procedure to add a new site.

To add a site:

1. From the Main Menu, click Admin.
2. Click Sites.
3. Click Create.
4. Name—Enter a name for the Site and click Create. The new site displays on the Sites page.

   For more information about creating Sites, see the Oracle Communications Interactive Session Recorder Administrator Guide.

Add the RSS to a Site

To enable connectivity between the RSS and the Index, you must add the new RSS to a site. Use the following procedure to add the new RSS.

To add the new RSS to the site:

1. From the Admin page, click Sites.
   The Sites page appears.

   The Sites page displays the following:

   Field	Description
   Name	The name of the site.
   Recorders	Provides information about the Site's Recorders including the number or recorders, their status, current sessions in use, and total sessions capacity.
   Locations	Provides the number of Locations associated with this Site.
   Archivers	Provides information about the Site's Archivers, including the number of Archivers and their status.

2. Select a site for which you want to add the RSS, and click Manage Site.

   The following page displays.

   

   The Recorders page displays the following about each RSS.

   Column	Description
   Name	Name of the RSS.
   VoIP IP	IP Address of the VoIP interface of the RSS.
   Status	Current status of the RSS . Status can be: Enabled (active) Disabled (inactive) Active with errors
   Uptime	Time elapsed since the last RSS process restart.
   Current Sessions in Use	Total number of licensed sessions currently being used on the RSS.
   Sessions Capacity	Total number of licensed sessions on the RSS.

3. Click Create. The Create Recorder page displays.
   
4. In the Name field, enter a name for the RSS you are adding.
5. In the VoIP IP field, enter the IP address (in dotted decimal format) on which the RSS is listening for SIP traffic.
6. In the Admin IP field, enter the IP address at which to connect to the RSS host over the Administrator network.
7. In the Data IP field, enter the IP address at which ISR components communicate with the RSS host over the Data network.
8. In the Sessions Capacity field, enter the value of the number of concurrent sessions allowed for this RSS host.

   Note:

   This number must comply with your Oracle license agreement.
9. Click Create.
   For additional information about RSS, see the Interactive Session Recorder Administrator Guide.