| User Data Repository Diameter Common Release 12.4 E92983-01 |
|
 Previous |
 Next |
Diameter CSV File Formats
The following tables describe the CSV file content and attribute field or column positions for all Diameter configuration data supported by the Diameter Application Type.
Note:
configuration data cannot be imported and exported with the Bulk Import/Export functions in Diameter Common."Local Node Configuration Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-4 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-4 Local Node CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | LocalNode (Keyword) |
| 2 | Name (Key) |
| 3 | Fqdn |
| 4 | Realm |
| 5 | Tcp Port |
| 6 | Sctp Port |
| 7 | Dtls Port |
| 8 | TlsPort |
| 9 | RADIUS UDP Server Ports [0] |
| (repeated x 10) | |
| 19 | Enable RADIUS UDP Client Ports (Yes/No) |
| 20 | RADIUS Client UDP Port Range Start |
| 21 | RADIUS Client UDP Port Range End |
| 22 | Verification Mode ('SslVerifyNone', 'SslVerifyPeer', 'SslVerifyPeerFailIfNoPeerCert' and 'SslVerifyPeerVerifyClientOnce') |
| 23 | Certificate Type |
| 24 | Certificate Name |
| 25 | Connection Configuration Set Name |
| 26 | Cex Configuration Set Name |
| 27 | IP Address [0] |
| (repeated x 128) | |
| 153 | IP Address [127] |
| 154 | IP Type [0] (LocalIp, PeerIp, IpfeTsa) |
| (repeated x 128) | |
| 282 | IP Type [127] (LocalIp, PeerIp, IpfeTsa) |
"Peer Node Configuration Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-5 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-5 Peer Node CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | PeerNode (Keyword) |
| 2 | Name (Key) |
| 3 | AAA Protocol (RADIUS, Diameter) |
| 4 | Fqdn |
| 5 | Realm |
| 6 | Tcp Port |
| 7 | Sctp Port |
| 8 | Dtls Port |
| 9 | Tls Port |
| 10 | RADIUS Server UDP Ports[0] |
| (repeated x 10) | |
| 19 | RADIUS Server UDP Ports[9] |
| 20 | Replace Destination Host (No, Yes) |
| 21 | Replace Destination Realm (No, Yes) |
| 22 | Minimum Connection Capacity |
| 23 | Alternate Route on Connection failure (SamePeer, DifferentPeer, SameConnection) |
| 24 | Alternate Route on Answer Timeout (SamePeer, DifferentPeer, SameConnection) |
| 25 | Alternate Route on Answer Result Code (SamePeer, DifferentPeer, SameConnection) |
| 26 | Alternate Implicit Route |
| 27 | Maximum Alternate Routing Attempts |
| 28 | IP Address [0] |
| (repeated x 128) | |
| 155 | IP Address [127] |
| 156 | Dynamic (No, Yes) |
| 157 | Routing Option Set |
| 158 | Pending Answer Timer |
| 159 | Peer Route Table |
| 160 | Message Priority Setting |
| 161 | Message Priority Configuration Set |
| 162 | Application Route Table |
| 163 | Topology Hiding Status (Enabled, Disabled) |
| 164 | Peer Node Group Name |
| 165 | Transaction Configuration Set |
| 166 | AVP Removal List |
"Peer Node Group Configuration Elements" in the Diameter User Guide and Help describes the configuration data elements list in Table 5-6 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-6 Peer Node Group CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | PeerNodeGroup (Keyword) |
| 2 | Peer Node Group Name |
"Route Groups Configuration Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-7 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-7 Route Group CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | RouteGrp (Keyword) |
| 2 | Name (Key) |
| 3 | Dynamic (No, Yes) |
| 4 | Type (Peer, Connection) |
| 5 | Peer Node 1 Name |
| 6 | Peer Node 1 Weight |
| (repeated x 160) | |
| 323 | Peer Node 160 Name |
| 324 | Peer Node 160 Weight |
| 325 | Connection 1 Name |
| 326 | Connection 1 Weight |
| (repeated x 512) | |
| 1347 | Connection 512 Name |
| 1348 | Connection 512 Weight |
"Route List Configuration Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-8 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-8 Route List CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | RouteList (Keyword) |
| 2 | Name (Key) |
| 3 | Dynamic (No, Yes) |
| 4 | Minimum Route Group Availability Weight |
| 5 | Route Across Route Groups (Enabled/Disabled) |
| 6 | Route Group 1 Name |
| 7 | Route Group 1 Priority |
| (repeated x 3) | |
| 10 | Route Group 3 Name |
| 11 | Route Group 3 Priority |
| 12 | Site Name[0] |
| 13 | Traffic Throttle Group[0] |
| 14 | Maximum Loss Percent Threshold[0] |
| 15 | Route Group Name[0] |
| (repeated x 10) | |
| 48 | Site Name[10] |
| 49 | Traffic Throttle Group[10] |
| 50 | Maximum Loss Percent Threshold[10] |
| 51 | Route Group Name[10] |
| (12-51 repeated x 3) | |
| 92 | Site Name[0] |
| 93 | Traffic Throttle Group[0] |
| 94 | Maximum Loss Percent Threshold[0] |
| 95 | Route Group Name[0] |
| (repeated x 10) | |
| 128 | Site Name[0] |
| 129 | Traffic Throttle Group[0] |
| 130 | Maximum Loss Percent Threshold[0] |
| 131 | Route Group Name[0] |
"Peer Routing Rules Configuration Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-9 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-9 Peer Routing Rule CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | PeerRouteRule (Keyword) |
| 2 | Name (Key) |
| 3 | Priority |
| 4 | param (DestHost, DestRealm, OrigHost, OrigRealm, CmdCode, AppID) |
| 5 | condOperator (Present, Absent, Equal, Not Equal, StartsWith, EndsWith, DontCare, Always True) |
| 6 | Value |
| 7 | param (DestHost, DestRealm, OrigHost,OrigRealm, CmdCode, AppID) |
| 8 | condOperator (Present, Absent, Equal, Not Equal, StartsWith, EndsWith, DontCare, Always True) |
| 9 | Value |
| 10 | param (DestHost, DestRealm, OrigHost, OrigRealm, CmdCode, AppID) |
| 11 | condOperator (Present, Absent, Equal, Not Equal, StartsWith, EndsWith, DontCare, Always True) |
| 12 | Value |
| 13 | param (DestHost, DestRealm, OrigHost, OrigRealm, CmdCode, AppID) |
| 14 | condOperator (Present, Absent, Equal, Not Equal, StartsWith, EndsWith, DontCare, Always True) |
| 15 | Value |
| 16 | param (DestHost, DestRealm, OrigHost, OrigRealm, CmdCode, AppID) |
| 17 | condOperator (Present, Absent, Equal, Not Equal, StartsWith, EndsWith, DontCare, Always True) |
| 18 | value |
| 19 | param (DestHost, DestRealm, OrigHost, OrigRealm, CmdCode, AppID) |
| 20 | condOperator (Present, Absent, Equal, Not Equal, StartsWith, EndsWith, DontCare, Always True) |
| 21 | Value |
| 22 | Action (RouteToPeer, Forward To Peer Route Table, SendAnswer, Abandon With No Answer) |
| 23 | Target Peer Route Table Name |
| 24 | Route List Name |
| 25 | Diameter Answer Code |
| 26 | Answer Error Message |
| 27 | Message Priority (NC, PR0, PR1, PR2) |
| 28 | Message Copy Configuration Set |
| 29 | Vendor Id |
| 30 | Peer Route Table |
"Connections Configuration Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-10 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-10 Connection CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | Conn (Keyword) |
| 2 | Connection Name (Key) |
| 3 | AAA Protocol (RADIUS, Diameter) |
| 4 | Type (FullySpecified, LocalMpInitiator, LocalMpResponder, RadiusServer, RadiusClient) |
| 5 | Local Node Name |
| 6 | Dynamic (No, Yes) |
| 7 | Peer Node Name |
| 8 | IPFE Initiator DAMP IP Address |
| 9 | Protocol Type (Tcp, Sctp, Dtls, Tls, Udp) |
| 10 | Connection Configuration Set Name |
| 11 | Cex Configuration Set Name |
| 12 | Cap Configuration Set Name |
| 13 | Primary Local IP Address |
| 14 | Secondary Local IP Address |
| 15 | Primary Peer IP Address |
| 16 | Secondary Peer IP Address |
| 17 | Transport Fqdn |
| 18 | Peer Identification (Ip, TransportFqdn, PeerFqdn) |
| 19 | Local Initiate Port |
| 20 | UDP Port |
| 21 | Transport Congestion Abatement Timeout |
| 22 | Remote Busy Usage (Enabled, Disabled) |
| 23 | Remote Busy Timeout |
| 24 | Message Priority Setting (None, RequestMessage, UserConfigured) |
| 25 | Message Priority Configuration Set |
| 26 | Egress Message Throttling Configuration Set |
| 27 | Shared Secret Configuration Set |
| 28 | Message Authenticator Configuration Set |
| 29 | Message Conversion Configuration Set |
| 30 | Ingress Status-Server Configuration Set |
| 31 | Suppress Connection Unavailable Alarm (Yes, No) |
| 32 | Suppress Connections Attempts (Yes, No) |
| 33 | Test Mode (Yes, No) |
"Connection Configuration Set Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-11 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-11 Connection Configuration Set CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | ConnCfgSet (Keyword) |
| 2 | ConnCfgSet Name (Key) |
| 3 | retransInitialTimeout |
| 4 | retransMinTimeout |
| 5 | retransMaxTimeout |
| 6 | retransMaxTimeoutInit |
| 7 | retransPathFailure |
| 8 | retransAssocFailure |
| 9 | retransInitFailure |
| 10 | sackDelay |
| 11 | heartbeatInterval |
| 12 | sctpSockSendSize |
| 13 | sctpSockRecvSize |
| 14 | burstMax |
| 15 | sctpNumInboundStreams |
| 16 | sctpNumOutboundStreams |
| 17 | sctpDatagramBundlingEnabled (Yes, No) |
| 18 | sctpMaxSegmentSize |
| 19 | sctpFragmentationEnabled (Yes, No) |
| 20 | sctpDataChunkDeliveryOrdered (Yes, No) |
| 21 | tcTimer |
| 22 | twinitTimer |
| 23 | tcexTimer |
| 24 | tdpxTimer |
| 25 | provingMode (Always, Suspect, Never) |
| 26 | provingTimeout |
| 27 | provingDwrsToSend |
| 28 | pendTransPerConn |
| 29 | cexHostIpValidationEnabled(Yes, No) |
| 30 | nagleEnabled (Yes, No) |
| 31 | tcpSockSendSize |
| 32 | tcpSockRecvSize |
| 33 | tcpMaxSegmentSize |
| 34 | tcpKeepAliveEnabled (Yes, No) |
| 35 | tcpKeepAliveIdleTime |
| 36 | tcpKeepAliveProbeInterval |
| 37 | tcpKeepAliveMaxCount |
| 38 | radiusPendTransPerConn |
| 39 | preventDupEgressRetrans |
| 40 | preventDupIngressRetrans |
| 41 | cachedResponseDur |
"Reroute On Answer Configuration Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-12 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-12 Reroute on Answer CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | RerouteOnAns (Keyword) |
| 2 | Answer Result-Code AVP Value |
| 3 | Application ID |
"System Options Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-13 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-13 System Options CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | Options (Keyword) |
| 2 | Fixed Connection Failure Major Aggregation Alarm Threshold |
| 3 | Fixed Connection Failure Critical Aggregation Alarm Threshold |
| 4 | IPFE Connection Failure Major Aggregation Alarm Threshold |
| 5 | IPFE Connection Failure Critical Aggregation Alarm Threshold |
| 6 | Peer Node Failure Critical Aggregation Alarm Threshold |
| 7 | Route List Failure Critical Aggregation Alarm Threshold |
| 8 | Excessive Reroute Onset Threshold |
| 9 | Excessive Reroute Abatement Threshold |
| 10 | Message Copy Feature Enabled (Enabled, Disabled) |
| 11 | Message Copy Disable Congestion Level (CL1, CL2) |
| 12 | Redirect Answer Processing Enabled (Yes, No) |
| 13 | Redirect Application Route Table |
| 14 | Redirect Peer Route Table |
| 15 | Client Socket Send Buffer Size |
| 16 | Client Socket Receive Buffer Size |
| 17 | Server Socket Send Buffer Size |
| 18 | Server Socket Receive Buffer Size |
| 19 | Encode FQDN In Lower Case (Yes, No) |
| 20 | Realm Expiration Minor Alarm Set Time |
| 21 | Realm Expiration Major Alarm Set Time |
| 22 | NGN-PS Admin State (Enabled, Disabled) |
| 23 | Minimum Answer Priority |
| 24 | Minimum Inviolable Priority |
| 25 | NGN-PS Maximum Message Rate Percent |
| 26 | NGN-PS Gx Admin State (Enabled, Disabled) |
| 27 | NGN-PS Gx ARP1 |
| 28 | NGN-PS Gx ARP2 |
| 29 | NGN-PS Gx ARP3 |
| 30 | NGN-PS Gx ARP4 |
| 31 | NGN-PS Gx ARP5 |
| 32 | NGN-PS Gx Advance Priority Type (None, Spr, Hss) |
| 33 | NGN-PS Rx Admin State (Enabled, Disabled) |
| 34 | NGN-PS Rx MPS AVP Value |
| 35 | NGN-PS Cx/Dx Admin State (Enabled, Disabled) |
| 36 | NGN-PS Dh/Sh Admin State (Enabled, Disabled) |
"DNS Options Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-14 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-14 DNS Options CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | DnsOption (Keyword) |
| 2 | Primary IP |
| 3 | Secondary IP |
| 4 | Query Duration Timer |
"CEX Configuration Sets Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-15 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-15 CEX Configuration Set CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | CexCfgSet (Keyword) |
| 2 | Name (Key) |
| 3 | Dynamic (Yes, No) |
| 4 | Selected Application ID [1] |
| 5 | Selected Type [1] |
| 6 | Selected Vendor ID [1] |
| (repeated x 10) | |
| 31 | Selected Application ID [10] |
| 32 | Selected Type [10] |
| 33 | Selected Vendor ID [10] |
| 34 | Must Application ID [1] |
| 35 | Must Type [1] |
| 36 | Must Vendor ID [1] |
| (repeated x 10) | |
| 61 | Must Application ID [10] |
| 62 | Must Type [10] |
| 63 | Must Vendor ID [10] |
| 64 | Vendor ID [1] |
| (repeated x 10) | |
| 73 | Vendor ID [10] |
| 74 | DSR Feature Status AVP (Yes, No) |
"Capacity Configuration Sets Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-16 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-16 Capacity Configuration Set CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | CapCfgSet (Keyword) |
| 2 | Capacity Configuration Set Name (Key) |
| 3 | Reserved Ingress MPS |
| 4 | Maximum Ingress MPS |
| 5 | Ingress MPS Minor Alarm Threshold |
| 6 | Ingress MPS Major Alarm Threshold |
| 7 | Ingress MPS Abatement Time |
| 8 | Convergence Time |
"Application Routing Rules Configuration Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-17 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-17 AppRouteRule CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | AppRouteRule (Keyword) |
| 2 | Name (Key) |
| 3 | Priority |
| 4 | param (DestHost, DestRealm, OrigHost,OrigRealm, CmdCode AppID) |
| 5 | condOperator (Present, Absent, Equal, Not Equal, StartsWith, EndsWith, DontCare, Always True) |
| 6 | Value |
| 7 | param (DestHost, DestRealm, OrigHost,OrigRealm, CmdCode AppID) |
| 8 | condOperator (Present, Absent, Equal, Not Equal, StartsWith, EndsWith, DontCare, Always True) |
| 9 | Value |
| 10 | param (DestHost, DestRealm, OrigHost,OrigRealm, CmdCode AppID) |
| 11 | condOperator (Present, Absent, Equal, Not Equal, StartsWith, EndsWith, DontCare, Always True) |
| 12 | Value |
| 13 | param (DestHost, DestRealm, OrigHost,OrigRealm, CmdCode AppID) |
| 14 | condOperator (Present, Absent, Equal, Not Equal, StartsWith, EndsWith, DontCare, Always True) |
| 15 | Value |
| 16 | param (DestHost, DestRealm, OrigHost,OrigRealm, CmdCode AppID) |
| 17 | condOperator (Present, Absent, Equal, Not Equal, StartsWith, EndsWith, DontCare, Always True) |
| 18 | Value |
| 19 | param (DestHost, DestRealm, OrigHost,OrigRealm, CmdCode AppID) |
| 20 | condOperator (Present, Absent, Equal, Not Equal, StartsWith, EndsWith, DontCare, Always True) |
| 21 | Value |
| 22 | Application Name |
| 23 | Action (Route to Application, Forward To Egress Routing, Send Answer, Abandon With No Answer, Forward To Application Route Table, Forward To Peer Route Table) |
| 24 | Target Route Table Name (Application Route Table Name/Peer Route Table Name) |
| 25 | Answer Result-Code Value |
| 26 | Vendor Id |
| 27 | Answer Error Message |
| 28 | Gx-Prime (No, Yes) |
| 29 | Application Route Table |
"Application Ids Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-18 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-18 Application ID CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | Appids (Keyword) |
| 2 | Application ID |
| 3 | Name |
"CEX Parameters elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-19 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-19 CEX Parameters CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | CexParameters (Keyword) |
| 2 | Application ID |
| 3 | Application ID Type (Authentication, Accounting) |
| 4 | Vendor ID |
"Pending Answer Timers Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-20 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-20 Pending Answer Timer CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | PendingAnswerTimer (Keyword) |
| 2 | Name (Key) |
| 3 | Timer |
"Routing Option Set Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-21 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-21 Routing Option Set CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | RoutingOptionSet (Keyword) |
| 2 | Name (Key) |
| 3 | Maximum Per Message Forwarding Allowed |
| 4 | Transaction Lifetime |
| 5 | Pending Answer Timer |
| 6 | Resource Exhausted Action |
| 7 | Resource Exhaustion Result Code |
| 8 | Resource Exhausted Error Message |
| 9 | Resource Exhausted Vendor Id |
| 10 | No Peer Response Action |
| 11 | No Peer Response Result Code |
| 12 | No Peer Response Error Message |
| 13 | No Peer Response Vendor Id |
| 14 | Connection Failure Action |
| 15 | Connection Failure Result Code |
| 16 | Connection Failure Error Message |
| 17 | Connection Failure Vendor Id |
| 18 | Connection Congestion Action |
| 19 | Connection Congestion Result Code |
| 20 | Connection Congestion Error Message |
| 21 | Connection Congestion Vendor Id |
| 22 | Peer Node Reported Congestion Action |
| 23 | Peer Node Reported Congestion Result Code |
| 24 | Peer Node Reported Congestion Error Message |
| 25 | Peer Node Reported Congestion Vendor Id |
| 26 | Destination Realm Not Served Action |
| 27 | Destination Realm Not Served Result Code |
| 28 | Destination Realm Not Served Error Message |
| 29 | Destination Realm Not Served Vendor Id |
| 30 | Nested ART/PRT Error Action |
| 31 | Nested ART/PRT Error Result Code |
| 32 | Nested ART/PRT Error Message |
| 33 | Nested ART/PRT Error Vendor Id |
"Peer Route Tables Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-22 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-22 Peer Route Table CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | PeerRouteTable (Keyword) |
| 2 | Name (Key) |
"Message Priority Configuration Set Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-23 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-23 Message Priority Configuration Set CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | MsgPriorityCfgSet (Keyword) |
| 2 | Name |
| 3 | applId[1] |
| 4 | cmdCode[1] |
| 5 | msgPriority[1] |
| (repeated x 50) | |
| 151 | applId[50] |
| 152 | cmdCode[50] |
| 153 | msgPriority[50] |
"Message Throttling Configuration Set Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-24 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-24 Message Throttling Configuration Set CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | MsgThrottlingCfgSet (Keyword) |
| 2 | Name (Key) |
| 3 | maxEMR |
| 4 | smoothFactor |
| 5 | abateTime |
| 6 | TT1 |
| 7 | AT1 |
| 8 | TT2 |
| 9 | AT2 |
| 10 | TT3 |
| 11 | AT3 |
"Message Copy Configuration Set Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-25 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-25 MessagecopyCfgSet CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | MessagecopyCfgSet (Keyword) |
| 2 | Message Copy Configuration Set Name |
| 3 | Message Copy Request Type |
| 4 | Original Answer Result Code for Message Copy |
| 5 | Route List of the DAS node |
| 6 | Ingress Answer Included (No, Yes) |
| 7 | DAS Answer Result Code |
| 8 | Max DAS Retransmission Attempts |
"Application Route Tables elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-26 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-26 Application Route Table CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | ApplicationRouteTable (Keyword) |
| 2 | Name (Key) |
"Command Codes elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-27 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-27 Command Code CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | CmdCodes (Keyword) |
| 2 | cmdCode |
| 3 | name |
Troubleshooting with IDIH "Traces elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-28 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-28 Trace CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | Trace (Keyword) |
| 2 | Trace Name (Key) |
| 3 | Trace Location |
| 4 | Scope Type |
| 5 | Scope Value |
| 6 | Number of Matches |
| 7 | Time of Duration |
| 8 | Content Type |
| 9 | Condition 1 Name |
| 10 | Condition 1 AVP |
| 11 | Condition 1 Operator |
| 12 | Condition 1 Value |
| (repeated x 13) | |
| 57 | Condition 13 Name |
| 58 | Condition 13 AVP |
| 59 | Condition 13 Operator |
| 60 | Condition 13 Value |
| 61 | Notes |
Troubleshooting with IDIH "Options elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-29 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-29 Trace Options CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | TraceOptions (Keyword) |
| 2 | Max Bandwidth |
| 3 | IDIH IP Address |
| 4 | IDIH Visualization IP address |
Troubleshooting with IDIH "Global Options elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-30 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-30 Trace Global Options CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | TraceGlobalOptions (Keyword) |
| 2 | Max Active Network Traces |
"Trusted Network Lists elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-31 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-31 Trusted Network List CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | TrustedNetworkList (Keyword) |
| 2 | Name (Key) |
| 3 | trustedRealm [1] |
| (repeated x 100) |
"Path Topology Hiding Configuration Sets Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-32 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-32 Path Topology Hiding Configuration Set CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | PathTopologyHidingCfgSet (Keyword) |
| 2 | Name (Key) |
| 3 | hostnameSuffix |
| (repeated x 10) | |
| 13 | pseudoRouteRecord |
| 14 | pseudoProxy |
| 15 | encryptionKey |
"S6a/S6d Topology Hiding Configuration Sets Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-33 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-33 S6a/S6d HSS Topology Hiding Configuration Set CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | HssTopologyHidingCfgSet (Keyword) |
| 2 | Name (Key) |
| 3 | useSingleHssPseudoHostname |
| 4 | singleHssPseudoHostname |
| 5 | count |
| 6 | randomizeCount |
| 7 | autoGenerate |
| 8 | prefix |
| 9 | suffix |
| 10 | length |
| 11 | action (SendAnswer, Forward, Abandon) |
| 12 | resultCode |
| 13 | vendorId |
| 14 | errMsg |
| 15 | actualHostname |
| 16 | pseudoHostname1 |
| 17 | pseudoHostname2 |
| 18 | pseudoHostname3 |
| (combination of actual and pseudo hostnames repeated x 500) |
"MME/SGSN Topology Hiding Configuration Sets Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-34 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-34 MME/SGSN Topology Hiding Configuration Set CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | MmeTopologyHidingCfgSet (Keyword) |
| 2 | Name (Key) |
| 3 | count |
| 4 | randomizeCount |
| 5 | autoGenerate |
| 6 | prefix |
| 7 | suffix |
| 8 | length |
| 9 | Action (SendAnswer, Forward, Abandon) |
| 10 | resultCode |
| 11 | vendorId |
| 12 | errMsg |
| 13 | actualHostname[1] |
| 14 | pseudoHostname1 |
| 15 | pseudoHostname2 |
| 16 | pseudoHostname3 |
| (combination of actual and pseudo hostnames repeated x 300) |
"S9 PCRF Topology Hiding Configuration Sets Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-35 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-35 S9 PCRF Topology Hiding Configuration Set CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | S9PcrfTopologyHidingCfgSet (Keyword) |
| 2 | Name (Key) |
| 3 | count |
| 4 | randomizeCount |
| 5 | autoGenerate |
| 6 | prefix |
| fe7 | suffix |
| 8 | length |
| 9 | action (SendAnswer, Forward, Abandon) |
| 10 | resultCode |
| 11 | vendorId |
| 12 | errMsg |
| 13 | actualHostname |
| 14 | pseudoHostname1 |
| 15 | pseudoHostname2 |
| 16 | pseudoHostname3 |
| (combination of actual and pseudo hostnames repeated x 600) |
"S9 AF/pCSCF Topology Hiding Configuration Sets Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-36 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-36 S9 AF/pCSCF Topology Hiding Configuration Set CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | S9AfPcscfTopologyHidingCfgSet (Keyword) |
| 2 | Name (Key) |
| 3 | count |
| 4 | randomizeCount |
| 5 | autoGenerate |
| 6 | prefix |
| 7 | suffix |
| 8 | length |
| 9 | Action (SendAnswer, Forward, Abandon) |
| 10 | resultCode |
| 11 | vendorId |
| 12 | errMsg |
| 13 | actualHostname[1] |
| 14 | pseudoHostname1 |
| 15 | pseudoHostname2 |
| 16 | pseudoHostname3 |
| (combination of actual and pseudo hostnames repeated x 500) |
"Protected Network Configuration Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-37 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-37 Protected Network CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | ProtectedNetwork (Keyword) |
| 2 | protectedRealm (Key) |
| 3 | trustedNetList |
| 4 | pathTopologyHidingCfgSet |
| 5 | mmeTopologyHidingCfgSet |
| 6 | hssTopologyHidingCfgSet |
| 7 | S9PcrfTopologyHidingCfgSet |
| 8 | S9AfPcscfTopologyHidingCfgSet |
Diameter Common CSV File Formats
The following tables describe the CSV file content and attribute field or column positions for all Diameter Common configuration data supported by the Diameter Application Type.
"MCCMNC Elements" describes the configuration data elements listed in Table 5-38 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-38 MCCMNC CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | MccMnc (Keyword) |
| 2 | Mobile Country Code (MCC) |
| 3 | Mobile Network Code (MNC) |
| 4 | Country Name |
| 5 | Network Name |
"MCCMNC Mapping Elements" describes the configuration data elements listed in Table 5-39 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-39 MCCMNC Mapping CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | MccMncMapping (Keyword) |
| 2 | Mobile Country Code (MCC) |
| 3 | Mobile Network Code (MNC) |
| 4 | Prefix |
| 5 | Country Name |
| 6 | Network Name |
| 7 | CCNDC |
| 8 | Realm |
| 9 | Description |
"MCC Ranges Elements" describes the configuration data elements listed in Table 5-40 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-40 Reserved MCC Ranges CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | ReservedMccRanges (Keyword) |
| 2 | startMccRange |
| 3 | endMccRange |
"Transaction Configuration Set Elements" describes the configuration data elements list in Table 5-41 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-41 Transaction Configuration Group CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | TransactionConfigurationSet(Keyword) |
| 2 | Name(Key) |
'Transaction Configuration Rule Elements" describes the configuration data elements listed in Table 5-42 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-42 Transaction Configuration Rule CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | TransactionConfigurationRule(Keyword) |
| 2 | Name(Key) |
| 3 | appId |
| 4 | cmdCode |
| 5 | routingOptionSet |
| 6 | pendingAnswerTimer |
| 7 | applicationRouteTable |
| 8 | peerRouteTable |
| 9 | transactionCfgSet |
"MP Profiles Elements" describes the editable configuration data elements listed in Table 5-43 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-43 MP Profile Parameters CSV Record Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | MpProfileRwParm (Keyword) |
| 2 | profileName (key) |
| 3 | key (key) |
| 4 | value |
"MP Profile Assignments Elements" describes the configuration data elements listed in Table 5-44 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-44 MP Profile Assignments CSV Record Format
| Column | Data Description |
|---|---|
| 0 | Application Type (Diameter) |
| 1 | MpProfileAssigment (Keyword) |
| 2 | nodeName (key) |
| 3 | profileName |
"Rate Limiting Configuration Elements" describes the configuration data elements listed in Table 5-45 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-45 Rate Limiting Configuration CSV Record Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | RateCfgSet (Keyword) |
| 2 | Name (Key) |
| 3 | Maximum Egress Rate |
| 4 | RateConvergenceTime |
| 5 | RateAbatementTime |
| 6 | RateOnsetThres1 |
| 7 | RateAbateThres1 |
| 8 | RateOnsetThres2 |
| 9 | RateAbateThres2 |
| 10 | RateOnsetThres3 |
| 11 | RateAbateThres3 |
"Pending Transaction Limiting Configuration Elements" describes the configuration data elements listed in Table 5-46 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-46 Pending Transaction Limiting Configuration CSV Record Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | PendTransCfgSet (Keyword) |
| 2 | Name (Key) |
| 3 | Maximum Number of Pending Transactions |
| 4 | PendTransOnsetThres1 |
| 5 | PendTransAbateThres1 |
| 6 | PendTransOnsetThres2 |
| 7 | PendTransAbateThres2 |
| 8 | PendTransOnsetThres3 |
| 9 | PendTransAbateThres3 |
| 10 | PendTransAbateTime3 |
"Egress Throttle List Elements" describes the configuration data elements listed in Table 5-47 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-47 Egress Throttle List CSV Record Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | Etl (Keyword) |
| 2 | Name (Key) |
| 3 | siteName_1 |
| 4 | etgName_1 |
| 5 | connFailPctReduction_1 |
| 6 | siteName_2 |
| 7 | etgName_2 |
| 8 | connFailPctReduction_2 |
| 9 | siteName_3 |
| 10 | etgName_3 |
| 11 | connFailPctReduction_3 |
| 12 | RateCfgSet |
| 13 | PendTransCfgSet |
"Egress Throttle Group Elements" in the Diameter User Guide and Help describes the configuration data elements listed in Table 5-48 and configuration considerations for the data elements that must be observed when the elements are edited n the CSV files.
Table 5-48 Egress Throttle Group CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | Etg (Keyword) |
| 2 | Name (Key) |
| 3 | EtgControlScope |
| 4 | RateCfgSet |
| 5 | PendTransCfgSet |
| 6 | Peers |
| (repeated x 128) | |
| 133 | Conns |
| (repeated x 128) |
"Dashboard Network Elements" describes the configuration data elements listed in Table 5-49 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-49 Dashboard Network CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | DshNetwork (Keyword) |
| 2 | Network Name (always "Network" in DSR 7.1) |
| 3 | SOAM Server Group #1 Name |
| 4 | SOAM Server Group #1 Display Order |
| 5-66 | (31 additional SOAM SG pairs of rows) |
| 67 | Summary Threshold Configuration Set Name |
"Dashboard Network Element Elements" describes the configuration data elements listed in Table 5-50 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-50 Dashboard Network Element CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | DshNe (Keyword) |
| 2 | Network Element Name |
| 3 | Server Threshold Configuration Set Name (empty or "ServerThresholds" in DSR 7.1) |
| 4 | Summary Threshold Configuration Set Name |
| 5 | Display Administratively Disabled Servers ("Yes"/"No") |
"Dashboard Metric Group Elements" describes the configuration data elements listed in Table 5-51 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-51 Dashboard Metric Group CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | DshMetricGroup (Keyword) |
| 2 | Metric Group Name |
| 3 | Metric #1 Name |
| 4 | Metric #1 Display on Dashboard ("Yes"/"No") |
| 5-30 | (13 additional SOAM SG pairs of rows) |
"Dashboard Metric Threshold Configuration Set Elements" describes the configuration data elements listed in Table 5-52 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-52 Dashboard Metric Threshold Configuration Set CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | DshMetricThresholdCfgSet (Keyword) |
| 2 | MTCfgSet Name |
| 3 | MTCfgSet Type ("Server"/"Summary") |
| 4 | Metric #1 Name |
| 5 | Metric #1 Threshold 1 |
| 6 | Metric #1 Threshold 2 |
| 7 | Metric #1 Threshold 3 |
| 8 | Metric #2 Name |
| 9 | Metric #2 Threshold 1 |
| 10 | Metric #2 Threshold 2 |
| 11 | Metric #2 Threshold 3 |
| 12-239 | (57 additional groups of 4 rows per engineering-configured Metric) |
"AVP Removal List Elements" describes the configuration data elements listed in Table 5-53 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-53 AvpRemovalList CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | AvpRemovalList (Keyword) |
| 2 | Name (Key) |
| 3 | Direction |
| 4 | Message Type |
| 5 | AVP Code_1 |
| 6 | AVP Name_1 |
| 7 | Vendor Id_1 |
| 8 | Vendor Name_1 |
| (repeated x 10) | |
| 41 | AVP Code_10 |
| 42 | AVP Name_10 |
| 43 | Vendor Id_10 |
| 44 | Vendor Name_10 |
"Discovery Attributes Elements" describes the configuration data elements listed in Table 5-54 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-54 DpdAttribute CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | DpdAttributeSet (Keyword) |
| 2 | Realm Name |
| 3 | DNS Set |
| 4 | Local Node |
| 5 | Connection Mode |
| 6 | Local Protocol Preference Override (No, Yes) |
| 7 | Application Id[1] |
| 8 | Application Type[1] |
| 9 | Vendor Id[1] |
| 10 | TCP Preference[1] |
| 11 | SCTP Preference[1] |
| 12 | TLS Preference[1] |
| 13 | DTLS Preference[1] |
| 14 | Max Num Peers[1] |
| 15 | Max Num Connections[1] |
| (repeated x 10) | |
| 88 | Application Id[10] |
| 89 | Application Type[10] |
| 90 | Vendor Id[10] |
| 91 | TCP Preference[10] |
| 92 | SCTP Preference[10] |
| 93 | TLS Preference[10] |
| 94 | DTLS Preference[10] |
| 95 | Max Num Peers[10] |
| 96 | Max Num Connections[10] |
| 97 | Local IP Address |
| 98 | IPFE Initiator DAMP |
| 99 | Connection Configuration Set |
| 100 | Capacity Configuration Set |
| 101 | Realm Prefix |
"DNS Set Elements" describes the configuration data elements listed in Table 5-55 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-55 DpdDnsSet CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | DpdDnsSet (Keyword) |
| 2 | DNS Set Name (Key) |
| 3 | Primary DNS Server IP Address |
| 4 | Secondary DNS Server IP Address |
| 5 | DNS Query Timeout |
| 6 | Number Of Retries |
"Dynamic Peer Discovery Realms Elements" describes the configuration data elements listed in Table 5-56 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-56 DpdRealm CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | DpdRealm (Keyword) |
| 2 | Realm Name |
"Traffic Throttle Group Elements" describes the configuration data elements listed in Table 5-57 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-57 TrafficThrottleGroup CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | TrafficThrottleGroup (Keyword) |
| 2 | Name (Key) |
| 3 | Traffic Throttle Point [1] |
| (repeated x 20) | |
| 22 | Traffic Throttle Point [20] |
| 23 | Application ID |
| 24 | Shared (No, Yes) |
"Traffic Throttle Point Elements" describes the configuration data elements listed in Table 5-58 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-58 TrafficThrottlePoint CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | TrafficThrottlePoint (Keyword) |
| 2 | Name (Key) |
| 3 | TTP Configuration Set |
| 4 | Max Loss Percent Threshold |
| 5 | Alternate Implicit Route |
| 6 | Peer Node |
| 7 | Application Id |
| 8 | Max ETR |
"Traffic Throttle Point Configuration Elements" describes the configuration data elements listed in Table 5-59 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-59 TrafficThrPointCfgSet CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | TrafficThrPointCfgSet (Keyword) |
| 2 | Name (Key) |
| 3 | Diversion Policy |
| 4 | Abatement Recovery Rate |
| 5 | Override Message Priority Threshold |
| 6 | Default Reduction Percentage |
| 7 | Default Validity Duration |
| 8 | Rate Convergence Time |
Diameter Signaling Firewall Elements describes the configuration data elements listed in Table 5-60 and configuration considerations for the data elements that must be observed when the elements are edited in the CSV files.
Table 5-60 Signaling Firewall CSV Format
| Column | Data Description |
|---|---|
| 0 | Application Type |
| 1 | Signaling Firewall (Keyword) |
| 2 | Signaling Node Name |
| 3 | Signaling Firewall Administrative State |
