Configuring ComAgent for UDR Machines

This section explains the procedure to configure ComAgent for UDR machines.

To configure ComAgent for UDR machines:

1. Configure UDR1 as a high availability service provider for each NO in UDR2.
   
   
2. From Main Menu, click Communication Agent.
3. Click Configuration.
4. Click Remote Servers.
5. Click Insert.
   1. In the Remote Server Name field, enter unique identifier used to label a Remote Server.
      Note: You can enter a maximum of 32 character string. The valid characters are alphanumeric, minus sign, period and underscore. The string must start with an alphanumeric or an underscore and end with an alphanumeric.
   2. In the Remote Server IPv4 IP Address field, enter the IPv4 IP address of the Remote Server. If IPv6 IP is specified then IPv4 IP address is optional.
   3. From the Remote Server Mode list, select the server mode. The available options are Client and Server.
   4. From the IP Address Preference list, select IP address preference for connection establishment. The available options are:
   5. In the assigned Local Server Groups field, add the server groups which can be associated with the Remote Server. The Servers in these server groups establish connections with this Remote Server. Server Groups which are available in the Available Local Server Groups list and the servers associated with the remote server are in the Assigned Local Server Groups list.
   6. Click OK to insert the remote server.
   7. Click Apply to configure the remote server.
   • ComAgent Network Preference
   • IPv4 Preferred
   • IPv6 Preferred

   The Insert window opens.
   
   
6. Configure the remaining NOs in UDR2 as HA remote server in UDR1.
   
   
   UDR2 sends the Pool Spanning events to UDR1.
7. Repeat step 4 and step 5 for UDR1.
   
   
   
   

Now, UDR1 can send Pool Spanning events to UDR2.