Edits an IP address object on a network related object.
Syntax
embeddedEdit {
BondPort
|
Port
|
VlanInterface
}
instanceipAddressConfig
id=valueipAddressConfigType=
{
STATIC
|
DYNAMIC
}
[
ipAddress=
] [
valueipNetmask=
]value
Where is:
instance
{
id=
|
valuename=
}value
Description
This command edits the attributes of an IP address and its
associated configuration (ipAddressConfig object) on a bond port,
port, or VLAN interface. Note that if the
ipAddressConfigType is set to
DYNAMIC, then any values specified for
ipAddress or ipNetmask are
ignored.
Options
The following table shows the available options for this command.
Option | Description |
|---|---|
{
| The network related object on which to edit the IP address (ipAddressConfig object). |
| The index value of the ipAddressConfig object. To find the index value, use the show command and look for the embedded object's IP address information. For example, to find the index value for an IP address object on a port: OVM> show Port id=0004fb00002000003ea1bffb91ece960 ... Ip Address Config 1 - Address Type = Ipv4 Ip Address Config 1 - Config Type = Static Ip Address Config 1 - Address = 10.172.76.100 Ip Address Config 1 - Netmask = 255.255.254.0 Interface Name = eth2 ...
The index value in this case is |
| The IP addressing configuration type. |
[
|
The IP address. Note that this value is ignored if the
|
[
|
The netmask. Note that this value is ignored if the
|
{
|
The instance of the object using either the
|
Examples
Example A.131 Editing an IP address on a port
OVM> embeddedEdit Port id=0004fb00002000003ea1bffb91ece960 ipAddressConfig \ id=1 ipAddressConfigType=STATIC ipAddress=10.172.76.100 ipNetmask=255.255.254.0
Example A.132 Editing an IP address on a bond port
OVM> embeddedEdit BondPort id=0004fb00002000000a5389824228bdf1 ipAddressConfig \ id=1 ipAddressConfigType=STATIC ipAddress=10.172.76.100 ipNetmask=255.255.254.0

