1. Programmer's Guide
  2. OCI Any Type and Data Functions
  3. OCI Any Data Interface Functions

OCI Any Data Interface Functions

Lists and describes OCI Any Data interface functions.

Table 30-3 lists the Any Data Interface functions that are described in this section.

Table 30-3 Any Data Functions  

Function Purpose

OCIAnyDataAccess()

Retrieve the data value of an OCIAnyData

OCIAnyDataAttrGet()

Get the value of the attribute at the current position in the OCIAnyData

OCIAnyDataAttrSet()

Set the attribute at the current position with a given value

OCIAnyDataBeginCreate()

Allocate an OCIAnyData for the given duration and initialize it with the type information

OCIAnyDataCollAddElem()

Add the next collection element to the collection attribute of the OCIAnyData at the current attribute position

OCIAnyDataCollGetElem()

Access sequentially the elements in the collection attribute at the current position in the OCIAnyData

OCIAnyDataConvert()

Construct an OCIAnyData with the given data value of the given type

OCIAnyDataDestroy()

Free an AnyData

OCIAnyDataEndCreate()

Mark the end of OCIAnyData creation

OCIAnyDataGetCurrAttrNum()

Return the current attribute number of the OCIAnyData

OCIAnyDataGetType()

Get the type corresponding to an AnyData value

OCIAnyDataIsNull()

Check if OCIAnyData is NULL

OCIAnyDataTypeCodeToSqlt()

Convert the OCITypeCode for an AnyData value to the SQLT code that corresponds to the representation of the value as returned by the OCIAnyData API

OCIAnyDataAccess()

Retrieve the data value of an OCIAnyData.

Purpose

The data value should be of the type with which the OCIAnyData was initialized. You can use this call to access an entire OCIAnyData, which can be of type OCI_TYPECODE_OBJECT, any of the collection types, or any of the built-in types.

Syntax

sword OCIAnyDataAccess ( OCISvcCtx    *svchp, 
                         OCIError     *errhp,
                         OCIAnyData   *sdata, 
                         OCITypeCode   tc, 
                         OCIType      *inst_type, 
                         void         *null_ind, 
                         void         *data_value, 
                         ub4          *length );

Parameters

svchp (IN)

The OCI service context.

errhp (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

sdata (IN)

Initialized pointer to an OCIAnyData.

tc (IN)

Typecode of the data value. This is used for type checking (with the initialization type of the OCIAnyData).

inst_type (IN)

The OCIType of the data value (if it is not a primitive one). If the tc parameter is any of the following types, then this parameter should be not NULL.

  • OCI_TYPECODE_OBJECT

  • OCI_TYPECODE_REF

  • OCI_TYPECODE_VARRAY

  • OCI_TYPECODE_TABLE

Otherwise, it could be NULL.

null_ind (OUT)

Indicates if the data_value is NULL. Pass an (OCIInd *) for all typecodes except OCI_TYPECODE_OBJECT. The value returned is OCI_IND_NOTNULL if the value is not NULL, and it is OCI_IND_NULL for a NULL value. If the typecode is OCI_TYPECODE_OBJECT, pass a pointer to the indicator struct of the data_value as the argument here. See OCIAnyDataAttrGet() for details.

data_value (OUT)

The data value (is of the type with which the OCIAnyData was initialized). See OCIAnyDataAttrGet() for the appropriate C type corresponding to each allowed typecode and for a description of how memory allocation behavior depends on the value passed for this parameter.

length (OUT)

Currently, this parameter is ignored. In the future, this may be used for certain typecodes where the data representation itself does not give the length, in bytes, implicitly.

Related Topics

OCIAnyDataAttrGet()

Gets the value of the attribute at the current position in the OCIAnyData.

Purpose

Attribute values can be accessed sequentially.

Syntax

sword OCIAnyDataAttrGet ( OCISvcCtx    *svchp, 
                          OCIError     *errhp, 
                          OCIAnyData   *sdata, 
                          OCITypeCode   tc, 
                          OCIType      *attr_type, 
                          void         *null_ind, 
                          void         *attr_value, 
                          ub4          *length, 
                          boolean       is_any );

Parameters

svchp (IN)

The OCI service context.

errhp (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

sdata (IN/OUT)

Pointer to initialized type OCIAnyData.

tc (IN)

Typecode of the attribute. Type checking happens based on tc, attr_type, and the type information in the OCIAnyData.

attr_type (IN) [optional]

The attr_type parameter should give the type description of the referenced type (for OCI_TYPECODE_REF) or the type description of the collection type (for OCI_TYPECODE_VARRAY, OCI_TYPECODE_TABLE), or the type description of the object (for OCI_TYPECODE_OBJECT). This parameter is not required for built-in typecodes.

null_ind (OUT)

Indicates if the attr_value is NULL. Pass (OCIInd *) in null_ind for all typecodes except OCI_TYPECODE_OBJECT.

If the typecode is OCI_TYPECODE_OBJECT, pass a pointer (void **) in null_ind.

The indicator returned is OCI_IND_NOTNULL if the value is not NULL, and it is OCI_IND_NULL for a NULL value.

attr_value (IN/OUT)

Value for the attribute.

length (IN/OUT)

Currently, this parameter is ignored. Pass 0 here. In the future, this may be used for certain typecodes where the data representation itself does not give the length, in bytes, implicitly.

is_any (IN)

Is attribute to be returned in the form of OCIAnyData?

Comments

You can use this call with an OCIAnyData of typecode OCI_TYPECODE_OBJECT only.

  • This call gets the value of the attribute at the current position in the OCIAnyData.

  • The tc parameter must match the type of the attribute at the current position; otherwise, an error is returned.

  • The is_any parameter is applicable only when the typecode of the attribute is one of these values:

    • OCI_TYPECODE_OBJECT

    • OCI_TYPECODE_VARRAY

    • OCI_TYPECODE_TABLE

    If is_any is TRUE, then attr_value is returned in the form of OCIAnyData*.

  • You must allocate the memory for the attribute before calling the function. You can allocate memory through OCIObjectNew(). For built-in types such as NUMBER and VARCHAR, the attribute can be just a pointer to a stack variable. Table 30-4 lists the available Oracle data types that can be used as object attribute types and the corresponding types of the attribute value that should be passed.

Table 30-4 Data Types and Attribute Values

Data Types attr_value

VARCHAR2, VARCHAR, CHAR

OCIString **

NUMBER, REAL, INT, FLOAT, DECIMAL

OCINumber **

DATE

OCIDate **

TIMESTAMP

OCIDateTime **

TIMESTAMP WITH TIME ZONE

OCIDateTime **

TIMESTAMP WITH LOCAL TIME ZONE

OCIDateTime **

INTERVAL YEAR TO MONTH

OCIInterval **

INTERVAL DAY TO SECOND

OCIInterval **

BLOB

OCILobLocator ** or OCIBlobLocator **

CLOB

OCILobLocator ** or OCIClobLocator *

BFILE

OCILobLocator **

REF

OCIRef **

RAW

OCIRaw **

VARRAY

OCIArray ** (or OCIAnyData * if is_any is TRUE)

TABLE

OCITable ** (or OCIAnyData * if is_any is TRUE)

OBJECT

void ** (or OCIAnyData * if is_any is TRUE)

Related Topics

OCIAnyDataAttrSet()

Sets the attribute at the current position with a given value.

Purpose

Sets the attribute at the current position with a given value.

Syntax

sword OCIAnyDataAttrSet ( OCISvcCtx    *svchp, 
                          OCIError     *errhp, 
                          OCIAnyData   *sdata, 
                          OCITypeCode   tc, 
                          OCIType      *attr_type, 
                          void         *null_ind, 
                          void         *attr_value, 
                          ub4           length, 
                          boolean       is_any );

Parameters

svchp (IN)

The OCI service context.

errhp (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

sdata (IN/OUT)

Initialized OCIAnyData.

tc (IN)

Typecode of the attribute. Type checking happens based on tc, attr_type, and the type information in the OCIAnyData.

attr_type (IN) [optional]

The attr_type parameter gives the type description of the referenced type (for OCI_TYPECODE_REF), the type description of the collection type (for OCI_TYPECODE_VARRAY, OCI_TYPECODE_TABLE), and the type description of the object (for OCI_TYPECODE_OBJECT). This parameter is not required for built-in typecodes or if OCI_TYPECODE_NONE is specified.

null_ind (IN)

Indicates if the attr_value is NULL. Pass (OCIInd *) for all typecodes except OCI_TYPECODE_OBJECT. The indicator should be OCI_IND_NOTNULL if the value is not NULL, and it should be OCI_IND_NULL for a NULL value.

If the typecode is OCI_TYPECODE_OBJECT, pass a pointer to the indicator struct of the attr_value as the argument here.

attr_value (IN)

Value for the attribute.

length (IN)

Currently, this parameter is ignored. Pass 0 here. In the future, this may be used for certain typecodes where the data representation itself does not give the length implicitly.

is_any (IN)

Is attribute in the form of OCIAnyData?

Comments

OCIAnyDataBeginCreate() creates an OCIAnyData with an empty skeleton instance. To fill the attribute values, use OCIAnyDataAttrSet() (for OCI_TYPECODE_OBJECT) or OCIAnyDataCollAddElem() (for the collection typecodes).

Attribute values must be set in order, from the first attribute to the last. The current attribute number is remembered as the state maintained inside the OCIAnyData. Piece-wise construction of embedded attributes and collection elements is not yet supported.

This call sets the attribute at the current position with attr_value. Once piece-wise construction has started for an OCIAnyData instance, the OCIAnyDataConstruct() calls can no longer be used.

The tc parameter must match the type of the attribute at the current position. Otherwise, an error is returned.

If is_any is TRUE, then the attribute must be in the form of OCIAnyData*, and it is copied into the enclosing OCIAnyData (data) without any conversion.

Table 30-5 lists the available data types that can be used as object attribute types and the corresponding types of the attribute value that should be passed.

Table 30-5 Data Types and Attribute Values

Data Types attr_value

VARCHAR2, VARCHAR, CHAR

OCIString *

NUMBER, REAL, INT, FLOAT, DECIMAL

OCINumber *

DATE

OCIDate *

TIMESTAMP

OCIDateTime *

TIMESTAMP WITH TIME ZONE

OCIDateTime *

TIMESTAMP WITH LOCAL TIME ZONE

OCIDateTime *

INTERVAL YEAR TO MONTH

OCIInterval *

INTERVAL DAY TO SECOND

OCIInterval *

BLOB

OCILobLocator * or OCIBlobLocator *

CLOB

OCILobLocator * or OCIClobLocator *

BFILE

OCILobLocator *

REF

OCIRef *

RAW

OCIRaw *

VARRAY

OCIArray * (or OCIAnyData * if is_any is TRUE)

TABLE

OCITable * (or OCIAnyData * if is_any is TRUE)

OBJECT

void * (or OCIAnyData * if is_any is TRUE)

Related Topics

OCIAnyDataBeginCreate()

Allocates an OCIAnyData for the given duration and initializes it with the type information.

Purpose

Allocates an OCIAnyData for the given duration and initializes it with the type information.

Syntax

sword OCIAnyDataBeginCreate ( OCISvcCtx       *svchp, 
                              OCIError        *errhp, 
                              OCITypeCode      tc, 
                              OCIType         *type,
                              OCIDuration      dur,
                              OCIAnyData     **sdata );

Parameters

svchp (IN)

The OCI service context.

errhp (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

tc (IN)

Typecode corresponding to OCIAnyData. Can be a built-in typecode or a user-defined type's typecode such as:

  • OCI_TYPECODE_OBJECT

  • OCI_TYPECODE_REF

  • OCI_TYPECODE_VARRAY

type (IN)

The type corresponding to OCIAnyData. If the typecode corresponds to a built-in type (OCI_TYPECODE_NUMBER, and so on), this parameter can be NULL. It should be non-NULL for user-defined types (OCI_TYPECODE_OBJECT, OCI_TYPECODE_REF, collection types, and so on).

dur (IN)

Duration for which OCIAnyData is allocated. It is one of these:

  • A user duration that was previously created. It can be created by using .

  • A predefined duration, such as OCI_DURATION_SESSION.

sdata (OUT)

Initialized OCIAnyData. If (*sdata) is not NULL at the beginning of the call, the memory could be reused instead of reallocating space for OCIAnyData.

Therefore, do not pass an uninitialized pointer here.

Comments

OCIAnyDataBeginCreate() creates an OCIAnyData with an empty skeleton instance. To fill in the attribute values, use OCIAnyDataAttrSet() for OCI_TYPECODE_OBJECT or OCIAnyDataCollAddElem() for the collection typecodes.

Attribute values must be set in order. They must be set from the first attribute to the last. The current attribute number is remembered as state maintained inside the OCIAnyData. Piece-wise construction of embedded attributes and collection elements is not yet supported.

For performance reasons, OCIAnyData ends up pointing to the OCIType parameter passed in. You must ensure that the OCIType lives longer (has an allocation duration >= the duration of OCIAnyData, if the OCIType is a transient one, or has an allocation or pin duration >= the duration of OCIAnyData, if the OCIType is a persistent one).

Related Topics

OCIAnyDataCollAddElem()

Adds the next collection element to the collection attribute of the OCIAnyData at the current attribute position.

Purpose

If the OCIAnyData is of a collection type, then there is no notion of attribute position and this call adds the next collection element.

Syntax

sword OCIAnyDataCollAddElem ( OCISvcCtx    *svchp, 
                              OCIError     *errhp, 
                              OCIAnyData   *sdata, 
                              OCITypeCode   collelem_tc, 
                              OCIType      *collelem_type, 
                              void         *null_ind, 
                              void         *elem_value, 
                              ub4           length, 
                              boolean       is_any, 
                              boolean       last_elem );

Parameters

svchp (IN)

The OCI service context.

errhp (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

sdata (IN/OUT)

Initialized OCIAnyData.

collelem_tc (IN)

The typecode of the collection element to be added. Type checking happens based on collelem_tc, collelem_type and the type information in the OCIAnyData.

collelem_type (IN) [optional]

The collelem_type parameter gives the type description of the referenced type (for OCI_TYPECODE_REF), the type description of the collection type (for OCI_TYPECODE_NAMEDCOLLECTION), and the type description of the object (for OCI_TYPECODE_OBJECT).

This parameter is not required for built-in typecodes.

null_ind (IN)

Indicates if the elem_value is NULL. Pass an (OCIInd *) for all typecodes except OCI_TYPECODE_OBJECT. The indicator should be OCI_IND_NOTNULL if the value is not NULL, and it should be OCI_IND_NULL for a NULL value.

If the typecode is OCI_TYPECODE_OBJECT, pass a pointer to the indicator struct of the elem_value as the argument here.

elem_value (IN)

Value for the collection element.

length (IN)

Length of the collection element.

is_any (IN)

Is the attribute in the form of OCIAnyData?

last_elem (IN)

Is the element being added the last in the collection?

Comments

This call can be invoked for an OCIAnyData of type OCI_TYPECODE_OBJECT or of any of the collection types. Once piece-wise construction has started for an OCIAnyData instance, the OCIAnyDataConstruct() calls can no longer be used.

As in OCIAnyDataAttrSet(), is_any is applicable only if the collelem_tc is that of typecode OCI_TYPECODE_OBJECT or a collection typecode. If is_any is TRUE, the attribute should be in the form of OCIAnyData *.

If the element being added is the last element in the collection, last_elem should be set to TRUE.

To add a NULL element, the NULL indicator (null_ind) should be set to OCI_IND_NULL, in which case all other arguments are ignored. Otherwise, null_ind must be set to OCI_IND_NOTNULL.

See OCIAnyDataAttrSet() for the type of attribute to be passed in for all the possible types of the collection elements.

Related Topics

OCIAnyDataCollGetElem()

Accesses sequentially the elements in the collection attribute at the current position in the OCIAnyData.

Purpose

Accesses sequentially the elements in the collection attribute at the current position in the OCIAnyData.

Syntax

sword OCIAnyDataCollGetElem ( OCISvcCtx    *svchp, 
                              OCIError     *errhp, 
                              OCIAnyData   *sdata, 
                              OCITypeCode   collelem_tc, 
                              OCIType      *collelem_type, 
                              void         *null_ind, 
                              void         *collelem_value, 
                              ub4          *length, 
                              boolean       is_any );

Parameters

svchp (IN)

The OCI service context.

errhp (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

sdata (IN/OUT)

Initialized OCIAnyData.

collelem_tc (IN)

The typecode of the collection element to be retrieved. Type checking happens based on collelem_tc, collelem_type and the type information in the OCIAnyData.

collelem_type (IN) [optional]

The collelem_type parameter gives the type description of the referenced type (for OCI_TYPECODE_REF), the type description of the collection type (for OCI_TYPECODE_NAMEDCOLLECTION), and the type description of the object (for OCI_TYPECODE_OBJECT).

This parameter is not required for built-in typecodes.

null_ind (OUT)

Indicates if the collelem_value is NULL. Pass an (OCIInd *) for all typecodes except OCI_TYPECODE_OBJECT. The indicator should be OCI_IND_NOTNULL if the value is not NULL, and it should be OCI_IND_NULL for a NULL value.

If the typecode is OCI_TYPECODE_OBJECT, pass a pointer (void **) to the indicator struct of the collelem_value as the argument here.

collelem_value (IN/OUT)

Value for the collection element.

length (IN/OUT)

Length of the collection element. Currently ignored. Set to 0 on input.

is_any (IN)

Is attr_value to be returned in the form of OCIAnyData?

Comments

The OCIAnyData data can also correspond to a top-level collection. If the OCIAnyData is of type OCI_TYPECODE_OBJECT, the attribute at the current position must be a collection of the appropriate type. Otherwise, an error is returned.

As for OCIAnyDataAttrGet(), the is_any parameter is applicable only if the collelem_tc typecode is OCI_TYPECODE_OBJECT. If is_any is TRUE, the attr_value is in the form of OCIAnyData *.

This call returns OCI_NO_DATA when the end of the collection has been reached. It returns OCI_SUCCESS upon success and OCI_ERROR upon error.

See OCIAnyDataAttrGet() for the type of attribute to be passed in for all the possible types of the collection elements.

Related Topics

OCIAnyDataConvert()

Constructs an OCIAnyData with the given data value that is of the given type.

Purpose

You can use this call to construct an entire OCIAnyData, which could be of type OCI_TYPECODE_OBJECT, any of the collection types, or any of the built-in types.

Syntax

sword OCIAnyDataConvert ( OCISvcCtx    *svchp, 
                          OCIError     *errhp, 
                          OCITypeCode   tc, 
                          OCIType      *inst_type, 
                          OCIDuration   dur, 
                          void         *null_ind, 
                          void         *data_value, 
                          ub4           length, 
                          OCIAnyData  **sdata );

Parameters

svchp (IN)

The OCI service context.

errhp (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

tc (IN)

Typecode of the data value. Can be a built-in typecode or a user-defined type's typecode (such as OCI_TYPECODE_OBJECT, OCI_TYPECODE_REF, or OCI_TYPECODE_VARRAY).

If (*sdata) is not NULL and it represents a skeleton instance returned during the OCIAnyDataSetAddInstance(), the tc and the inst_type parameters are optional here. This is because the type information for such a skeleton instance is known. If the tc and inst_type parameters are provided for this situation, they are used only for type-checking purposes.

inst_type (IN)

Type corresponding to the OCIAnyData. If the typecode corresponds to a built-in type (OCI_TYPECODE_NUMBER, and so on), this parameter can be NULL. It should not be NULL for user-defined types (OCI_TYPECODE_OBJECT, OCI_TYPECODE_REF, or collection types).

dur (IN)

Duration for which the OCIAnyData is allocated. It is one of these:

  • A user duration that was previously created. It can be created by using OCIDurationBegin().

  • A predefined duration, such as OCI_DURATION_SESSION.

null_ind

Indicates if data_value is NULL. Pass an (OCIInd *) for all typecodes except OCI_TYPECODE_OBJECT. The indicator is OCI_IND_NOTNULL if the value is not NULL, and it is OCI_IND_NULL for a NULL value.

If the typecode is OCI_TYPECODE_OBJECT, pass a pointer to the indicator struct of the data_value as the argument here.

data_value (IN)

The data value (should be of the type with which the OCIAnyData was initialized). See OCIAnyDataAttrSet() for the appropriate C type corresponding to each allowed typecode.

length (IN)

Currently, this parameter is ignored. Pass 0 here. In the future, this may be used for certain typecodes where the data representation itself does not give the length implicitly.

sdata (IN/OUT)

Initialized OCIAnyData. If (*sdata) is not NULL at the beginning of the call, the memory could be reused instead of reallocating space for OCIAnyData.

Therefore, do not pass an uninitialized pointer here.

If (*sdata) represents a skeleton instance returned during an OCIAnyDataSetAddInstance() call, the tc and inst_type parameters are used for type checking, if necessary.

Comments

For performance reasons, OCIAnyData pointer ends up pointing to the passed in OCIType parameter. You must ensure that the OCIType lives longer (has an allocation duration >= the duration of OCIAnyData, if the OCIType is a transient one, or has an allocation or pin duration >= the duration of OCIAnyData, if the OCIType is a persistent one).

Related Topics

OCIAnyDataDestroy()

Free an OCIAnyData.

Purpose

Frees an OCIAnyData.

Syntax

sword OCIAnyDataDestroy ( OCISvcCtx      *svchp, 
                          OCIError       *errhp, 
                          OCIAnyData     *sdata );

Parameters

svchp (IN)

The OCI service context.

errhp (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

sdata (IN/OUT)

Pointer to a type of OCIAnyData to be freed.

Related Topics

OCIAnyDataEndCreate()

Marks the end of OCIAnyData creation.

Purpose

It should be called after initializing all attributes of its instances with suitable values. This call is valid only if OCIAnyDataBeginCreate() was called earlier for the OCIAnyData.

Syntax

sword OCIAnyDataEndCreate ( OCISvcCtx      *svchp, 
                            OCIError       *errhp, 
                            OCIAnyData     *data );

Parameters

svchp (IN)

The OCI service context.

errhp (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

data (IN/OUT)

Initialized OCIAnyData.

Related Topics

OCIAnyDataGetCurrAttrNum()

Returns the current attribute number of OCIAnyData.

Purpose

If OCIAnyData is being constructed, this function refers to the current attribute that is being set. Otherwise, if OCIAnyData is being accessed, this function refers to the attribute that is being accessed.

Syntax

sword OCIAnyDataGetCurrAttrNum( OCISvcCtx      *svchp, 
                                OCIError       *errhp, 
                                OCIAnyData     *sdata,
                                ub4            *attrnum );

Parameters

svchp (IN)

The OCI service context.

errhp (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

sdata (IN)

Initialized OCIAnyData.

attrnum (OUT)

The attribute number.

Related Topics

OCIAnyDataGetType()

Gets the type corresponding to an OCIAnyData value.

Purpose

It returns the actual pointer to the type maintained inside an OCIAnyData. No copying is done for performance reasons. Do not use this type after the OCIAnyData is freed (or its duration ends).

Syntax

sword OCIAnyDataGetType( OCISvcCtx      *svchp, 
                         OCIError       *errhp, 
                         OCIAnyData     *data,
                         OCITypeCode    *tc, 
                         OCIType       **type );

Parameters

svchp (IN)

The OCI service context.

errhp (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err, and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

data (IN)

Initialized OCIAnyData.

tc (OUT)

The typecode corresponding to the OCIAnyData.

type (OUT)

The type corresponding to the OCIAnyData. This is NULL if the OCIAnyData corresponds to a built-in type.

Related Topics

OCIAnyDataIsNull()

Checks if the content of the type within the OCIAnyData is NULL.

Purpose

Checks if the content of the type within the OCIAnyData is NULL.

Syntax

sword OCIAnyDataIsNull ( OCISvcCtx         *svchp, 
                         OCIError          *errhp,
                         const OCIAnyData  *sdata,
                         boolean           *isNull) ;

Parameters

svchp (IN)

The OCI service context.

errhp (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

sdata (IN)

OCIAnyData to be checked.

isNull (IN/OUT)

TRUE if NULL; otherwise, FALSE.

Related Topics

OCIAnyDataTypeCodeToSqlt()

Converts the OCITypeCode for an AnyData value to the SQLT code that corresponds to the representation of the value as returned by the OCIAnyData API.

Purpose

Converts the OCITypeCode for an OCIAnyData value to the SQLT code that corresponds to the representation of the value as returned by the OCIAnyData API.

Syntax

sword  OCIAnyDataTypeCodeToSqlt ( OCIError       *errhp, 
                                  OCITypeCode     tc,
                                  ub1            *sqltcode,
                                  ub1            *csfrm) ;

Parameters

errhp (IN/OUT)

The OCI error handle. If there is an error, it is recorded in errhp, and this function returns OCI_ERROR. Diagnostic information can be obtained by calling OCIErrorGet().

tc (IN)

OCITypeCode corresponding to the AnyData value.

sqltcode (OUT)

SQLT code corresponding to the user format of the typecode.

csfrm (OUT)

Charset form corresponding to the user format of the typecode. Meaningful only for character types. Returns SQLCS_IMPLICIT or SQLCS_NCHAR (for NCHAR types).

Comments

This function converts OCI_TYPECODE_CHAR and OCI_TYPECODE_VARCHAR2 to SQLT_VST (which corresponds to the OCIString mapping) with a charset form of SQLCS_IMPLICIT. OCI_TYPECODE_NVARCHAR2 also returns SQLT_VST (OCIString mapping is used by the OCIAnyData API) with a charset form of SQLCS_NCHAR.

Related Topics