A Handle and Descriptor Attributes
This appendix describes the attributes for OCI handles and descriptors.
OCI handles and descriptors can be read with OCIAttrGet()
, and modified with OCIAttrSet()
.
This appendix contains these topics:
A.1 Conventions
For each handle type, the attributes that can be read or changed are listed.
Each attribute listing includes the following information:
- Mode
-
The following modes are valid:
READ - The attribute can be read using
OCIAttrGet()
.WRITE - The attribute can be modified using
OCIAttrSet()
.READ/WRITE - The attribute can be read using
OCIAttrGet()
, and it can be modified usingOCIAttrSet()
. - Description
-
This is a description of the purpose of the attribute.
- Attribute Data Type
-
This is the data type of the attribute. If necessary, a distinction is made between the data type for READ and WRITE modes.
- Valid Values
-
In some cases, only certain values are allowed, and they are listed here.
- Example
-
In some cases an example is included.
A.2 Environment Handle Attributes
Lists and describes environment handle attributes.
The following attributes are used for the environment handle.
OCI_ATTR_ALLOC_DURATION
OCI_ATTR_BIND_DN
OCI_ATTR_CACHE_ARRAYFLUSH
- Mode
-
READ/WRITE
- Description
-
When this attribute is set to
TRUE
, duringOCICacheFlush()
the objects that belong to the same table are flushed, which can considerably improve performance. An attribute value ofTRUE
should only be used when the order in which the objects are flushed is not important. When the attribute value is set toTRUE
, it is not guaranteed that the order in which the objects are marked dirty is preserved.See Also:
Object Cache Parameters and About Flushing Changes to the Server
- Attribute Data Type
-
boolean */boolean
OCI_ATTR_CACHE_MAX_SIZE
- Mode
-
READ/WRITE
- Description
-
Sets the maximum size (high watermark) for the client-side object cache as a percentage of the optimal size. Usually you can set the value at 10%, the default, of the optimal size,
OCI_ATTR_CACHE_OPT_SIZE
. Setting this attribute to 0 results in a value of 10 being used. The object cache uses the maximum and optimal values for freeing unused memory in the object cache.See Also:
- Attribute Data Type
-
ub4 */ub4
OCI_ATTR_CACHE_OPT_SIZE
OCI_ATTR_ENV_CHARSET_ID
- Mode
-
READ
- Description
-
Local (client-side) character set ID. Users can update this setting only after creating the environment handle but before calling any other OCI functions. This restriction ensures the consistency among data and metadata in the same environment handle. When character set ID is UTF-16, an attempt to get this attribute is invalid.
- Attribute Data Type
-
ub2 *
OCI_ATTR_ENV_NCHARSET_ID
- Mode
-
READ
- Description
-
Local (client-side) national character set ID. Users can update this setting only after creating the environment handle but before calling any other OCI functions. This restriction ensures the consistency among data and metadata in the same environment handle. When character set ID is UTF-16, an attempt to get this attribute is invalid.
- Attribute Data Type
-
ub2 *
OCI_ATTR_ENV_NLS_LANGUAGE
OCI_ATTR_ENV_NLS_TERRITORY
OCI_ATTR_ENV_UTF16
OCI_ATTR_EVTCBK
OCI_ATTR_EVTCTX
OCI_ATTR_HEAPALLOC
OCI_ATTR_LDAP_AUTH
- Mode
-
READ/WRITE
- Description
-
The authentication mode. The following are the valid values:
0x0: No authentication; anonymous bind.
0x1: Simple authentication; user name and password authentication.
0x5: SSL connection with no authentication.
0x6: SSL: only server authentication required.
0x7: SSL: both server authentication and client authentication are required.
0x8: Authentication method is determined at run time.
- Attribute Data Type
-
ub2 */ub2
OCI_ATTR_LDAP_CRED
OCI_ATTR_LDAP_CTX
OCI_ATTR_LDAP_HOST
OCI_ATTR_LDAP_PORT
OCI_ATTR_SODA_METADATA_CACHE
OCI_ATTR_OBJECT
OCI_ATTR_PINOPTION
- Mode
-
READ/WRITE
- Description
-
This attribute sets the value of
OCI_PIN_DEFAULT
for the application associated with the environment handle.For example, if
OCI_ATTR_PINOPTION
is set toOCI_PIN_RECENT
, andOCIObjectPin()
is called with thepin_option
parameter set toOCI_PIN_DEFAULT
, the object is pinned inOCI_PIN_RECENT
mode. - Attribute Data Type
-
OCIPinOpt */OCIPinOpt
OCI_ATTR_OBJECT_NEWNOTNULL
OCI_ATTR_OBJECT_DETECTCHANGE
OCI_ATTR_PIN_DURATION
OCI_ATTR_SHARED_HEAPALLOC
- Mode
-
READ
- Description
-
Returns the size of the memory currently allocated from the shared pool. This attribute works on any environment handle, but the process must be initialized in shared mode to return a meaningful value. This attribute is read as follows:
ub4 heapsz = 0; OCIAttrGet((void *)envhp, (ub4)OCI_HTYPE_ENV, (void *) &heapsz, (ub4 *) 0, (ub4)OCI_ATTR_SHARED_HEAPALLOC, errhp);
- Attribute Data Type
-
ub4 *
OCI_ATTR_SUBSCR_PORTNO
OCI_ATTR_WALL_LOC
A.3 Error Handle Attributes
Lists and describes error handle attributes.
The following attributes are used for the error handle.
OCI_ATTR_DML_ROW_OFFSET
OCI_ATTR_ERROR_IS_RECOVERABLE
A.4 Service Context Handle Attributes
Lists and describes service context handle attributes.
The following attributes are used for service context handle.
OCI_ATTR_CALL_TIMEOUT
- Mode
-
READ/WRITE
- Description
-
A database round-trip call using the service context times out within the specified time in milli-seconds, if not completed. When the call times out, a network timeout error is returned. This attribute can be set dynamically. Setting this value stays effective for all subsequent round-trip calls executed using the same service context until a different value is set. To remove the timeout, the value must be set to 0.
This is a client-only change. So, for using this feature, you must use a release 18c client. This feature is database version agnostic, that is, you can use this feature with any supported version of the database.
Timeout values set in different places are effective according to the following order of precedence (where 1 is the highest precedence):-
Call timeout set on the OCI handle using
OCIAttrSet()
. -
Timeout set with the OCI attributes,
OCI_ATTR_SEND_TIMEOUT
andOCI_ATTR_RECEIVE_TIMEOUT
. -
Timeout set in the
sqlnet.ora
file with the parameters,SQLNET.RECV_TIMEOUT
andSQLNET.SEND_TIMEOUT
.
Error returned to the application:ORA-03156 "OCI call timed out"
The Call timeout is on each individual round-trip between OCI and Oracle Database. Each OCI method or operation may require zero or more round-trips to Oracle Database. The timeout value applies to each round-trip individually, not to the sum of all round-trips. Time spent processing in OCI before or after the completion of each round-trip is not counted.-
If the time from the start of any round-trip to the completion of the same round-trip exceeds the timeout value, then the operation is halted and an Oracle error is returned.
-
In the case where an OCI operation requires more than one round-trip and each round-trip takes less than the timeout value, then no timeout occurs, even if the sum of all round-trip calls exceeds the timeout value.
-
If no round-trip is required, the operation will never be interrupted.
After a timeout occurs, OCI attempts to clean up the internal connection state. The cleanup is allowed to take another timeout value. If the cleanup was successful, an
ORA-3156
will be returned and the application can continue to use the connection.For small values of the timeout value, the connection cleanup may not complete successfully within the additional timeout period. In this case an
ORA-3113
is returned, and the following OCI call using the same connection gets an ORA-3114 and the connection will no longer be usable. It should be released.Alternatively, the
OCI_ATTR_BREAK_ON_NET_TIMEOUT
attribute can additionally be set toFALSE
. This setting drops the connection, eliminating calls toOCIBreak()
andOCIReset()
when a timeout occurs.Note:
When call timeout is set, then ora-12161 may be returned while reading a large amount of data. This error must be treated as ora-3136. -
- Attribute Data Type
-
ub4*/ub4
- Example
static void func1( ) { sword status = 0; OCIStmt *stmthp = (OCIStmt *)0; OraText *sqlStmt = (OraText *)"SELECT EMPNO FROM SCOTT.EMP"; ub4 set_timeout= 200; /* in milliseconds */ ub4 get_timeout = 0; Checkerr (errhp, \ OCIStmtPrepare2 ((OCISvcCtx *)svchp, (OCIStmt **)&stmthp, \ (OCIError *)errhp, (OraText *)sqlStmt, (ub4)strlen((char *)sqlStmt), \ (OraText *)NULL, (ub4) 0, (ub4)OCI_NTV_SYNTAX, (ub4)OCI_DEFAULT), \ (OraText *)"OCIStmtPrepare2"); /* Set the call Timeout (in milliseconds) */ Checkerr (errhp, OCIAttrSet(svchp, (ub4) OCI_HTYPE_SVCCTX, (dvoid *) &set_timeout, (ub4) 0, (ub4) OCI_ATTR_CALL_TIMEOUT, errhp), "OCIAttrSet OCI_ATTR_CALL_TIMEOUT"); if ((status = OCIStmtExecute ((OCISvcCtx *)svchp, \ (OCIStmt *)stmthp, (OCIError *)errhp, (ub4)1, (ub4)0, \ (OCISnapshot *)0, (OCISnapshot *)0, (ub4)OCI_DEFAULT)) \ != OCI_SUCCESS) { printf ( "OCIStmtExecute Failed with timeout: %dms\n", set_timeout); Checkerr (errhp, status,(OraText *)"OCIStmtExecute"); } /* Get the call Timeout (in milliseconds) */ Checkerr (errhp, OCIAttrGet(svchp, (ub4) OCI_HTYPE_SVCCTX, (dvoid *) &get_timeout, (ub4) 0, (ub4) OCI_ATTR_CALL_TIMEOUT, errhp), "OCIAttrGet OCI_ATTR_CALL_TIMEOUT"); Checkerr (errhp, \ OCIStmtRelease ((OCIStmt *)stmthp, (OCIError *)errhp,(dvoid *)NULL, \ 0, OCI_DEFAULT), (oratext *)"StmtRelease"); } /* End of func1 */
OCI_ATTR_ENV
OCI_ATTR_INSTNAME
See the OCI_ATTR_INSTNAME
attribute in Shard Instance Descriptor Attributes for more information about its use on the service context.
OCI_ATTR_IN_V8_MODE
- Mode
-
READ
- Description
-
Allows you to determine whether an application has switched to Oracle release 7 mode (for example, through an
OCISvcCtxToLda()
call). A nonzero (TRUE
) return value indicates that the application is currently running in Oracle release 8 mode, a zero (false) return value indicates that the application is currently running in Oracle release 7 mode. - Attribute Data Type
-
ub1 *
- Example
-
The following code sample shows how this attribute is used:
in_v8_mode = 0; OCIAttrGet ((void *)svchp, (ub4)OCI_HTYPE_SVCCTX, (ub1 *)&in_v8_mode, (ub4) 0, OCI_ATTR_IN_V8_MODE, errhp); if (in_v8_mode) fprintf (stdout, "In V8 mode\n"); else fprintf (stdout, "In V7 mode\n");
OCI_ATTR_MAX_CHARSET_RATIO
- Mode
-
READ
- Description
-
Returns the maximum character set expansion ratio from server to client character set. Using these attributes is useful in scenarios where there are different character sets between server and client. This is useful to allocate optimal memory of buffers before conversion so that when data is returned from the database, sufficient space can be allocated to hold it.
- Attribute Data Type
-
ub4 *
- Example
size_t cratio; OCIAttrGet((void *)svchp, (ub4)OCI_HTYPE_SVCCTX, (size_t *)&cratio, (ub4) 0, OCI_ATTR_MAX_CHARSET_RATIO, errhp); printf("Conversion ratio from server to client character set is %d\n", cratio);
OCI_ATTR_MAX_NCHARSET_RATIO
- Mode
-
READ
- Description
-
Returns the maximum character set expansion ratio from server to client national character set. Using these attributes is useful in scenarios where there are different national character sets between server and client. This is useful to allocate optimal memory of buffers before conversion so that when data is returned from the database, sufficient space can be allocated to hold it.
- Attribute Data Type
-
ub4 *
- Example
size_t cratio; OCIAttrGet((void *)svchp, (ub4)OCI_HTYPE_SVCCTX, (size_t *)&cratio, (ub4) 0, OCI_ATTR_MAX_NCHARSET_RATIO, errhp); printf("Conversion ratio from server to client ncharset is %d\n", cratio);
OCI_ATTR_SERVER
OCI_ATTR_SESSION
OCI_ATTR_STMTCACHE_CBK
- Mode
-
READ/WRITE
- Description
-
Used to get and set the application's callback function on the
OCISvcCtx
handle. This function, if registered onOCISvcCtx
, is called when a statement in the statement cache belonging to this service context is purged or when the session is ended.The callback function must be of this prototype:
sword (*OCICallbackStmtCache)(void *ctx, OCIStmt *stmt, ub4 mode)
ctx
: IN argument. This is the same as the context the application has set on the current statement handle.stmt
: IN argument. This is the statement handle that is being purged from the cache.mode
: IN argument. This is the mode in which the callback function is being called. Currently only one value is supported,OCI_CBK_STMTCACHE_STMTPURGE
, which means the callback is being called during purging of the current statement. - Attribute Data Type
sword (*OCICallbackStmtCache)(void *ctx, OCIStmt *stmt, ub4 mode)
OCI_ATTR_STMTCACHESIZE
- Mode
-
READ/WRITE
- Description
-
The default value of the statement cache size is 20 statements, for a statement cache-enabled session. The user can increase or decrease this value by setting this attribute on the service context handle. This attribute can also be used to enable or disable statement caching for the session, pooled or nonpooled. Statement caching can be enabled by setting the attribute to a nonzero size and disabled by setting it to zero.
- Attribute Data Type
-
ub4 *
/ub4
OCI_ATTR_TRANS
OCI_ATTR_VARTYPE_MAXLEN_COMPAT
OCI_ATTR_SESSGET_FLAGS
- Example
-
ub4 sessgetFlags = 0; if (!(lstat = OCISessionGet(envhp, errhp2, &svchp, authp,(OraText *)poolName, (ub4)poolNameLen, NULL, 0, NULL, NULL, NULL, OCI_SESSGET_SPOOL))) { checkerr(errhp2, OCIAttrGet(svchp, OCI_HTYPE_SVCCTX, (dvoid *) &sessgetFlags, NULL, OCI_ATTR_SESSGET_FLAGS, errhp2)); if (sessgetFlags & OCI_SESSGET_FLAGS_NEW) { printf("Yes, it's new connection\n"); } }
- Valid Flags
- Following flags are set:
OCI_SESSGET_FLAGS_NEW
: A new connection is created and this is not an existing connection from the pool.OCI_SESSGET_FLAGS_POOLED_SERVER
: Connection is to a Database Resident Connection Pool.OCI_SESSGET_FLAGS_RAC_DATA_AFFN
: Connection is to a RAC Affinity Enabled Database.OCI_SESSGET_FLAGS_SHARD
: Connection is to a sharded database.
A.5 Server Handle Attributes
Lists and describes server handle attributes.
The following attributes are used for the server handle.
See Also:
The following event handle attributes are also available for the server handle:
OCIXStreamOutLCRReceive() for more information about using the following attributes
OCI_ATTR_ACCESS_BANNER
OCI_ATTR_BREAK_ON_NET_TIMEOUT
OCI_ATTR_ENV
OCI_ATTR_EXTERNAL_NAME
- Mode
-
READ/WRITE
- Description
-
The external name is the user-friendly global name stored in
sys.props$.value$,
wherename = 'GLOBAL_DB_NAME'
. It is not guaranteed to be unique unless all databases register their names with a network directory service.Database names can be exchanged with the server for distributed transaction coordination. Server database names can only be accessed only if the database is open at the time the
OCISessionBegin()
call is issued. - Attribute Data Type
-
oratext **
/oratext *
OCI_ATTR_FOCBK
OCI_ATTR_INTERNAL_NAME
OCI_ATTR_INSTNAME
See the OCI_ATTR_INSTNAME
attribute in Shard Instance Descriptor Attributes for more information about its use as a server handle attribute.
OCI_ATTR_IN_V8_MODE
- Mode
-
READ
- Description
-
Allows you to determine whether an application has switched to Oracle release 7 mode (for example, through an
OCISvcCtxToLda()
call). A nonzero (TRUE
) return value indicates that the application is currently running in Oracle release 8 mode, a zero (FALSE
) return value indicates that the application is currently running in Oracle release 7 mode. - Attribute Data Type
-
ub1 *
OCI_ATTR_NONBLOCKING_MODE
- Mode
-
READ/WRITE
- Description
-
This attribute determines the blocking mode. When read, the attribute value returns
TRUE
if the server context is in nonblocking mode. When set, it toggles the nonblocking mode attribute. You must set this attribute only afterOCISessionBegin()
orOCILogon2()
has been called. Otherwise, an error is returned. - Attribute Data Type
-
ub1 */ub1
See Also:
OCI_ATTR_RECEIVE_TIMEOUT
- Mode
-
READ/WRITE
- Description
-
Time specified in milliseconds that a client waits for response data from the database server. When set to a value of zero, the timeout functionality is disabled and the client may wait a long period of time for a response from a database server.
The semantics of this attribute is the same as that of
SQLNET.RECV_TIMEOUT
that can be specified in thesqlnet.ora
file. When set on the server handle, the value overrides the one specified in thesqlnet.ora
file. - Attribute Data Type
-
ub4*/ub4
OCI_ATTR_SEND_TIMEOUT
- Mode
-
READ/WRITE
- Description
-
Time specified in milliseconds that a client waits to complete send operations to the database server. When set to a value of zero, the timeout functionality is disabled and the client may wait a long period of time to complete sending the data to the database server.
The semantics of this attribute is the same as that of
SQLNET.SEND_TIMEOUT
that can be specified in thesqlnet.ora
file. When set on the server handle, the value overrides the one specified in thesqlnet.ora
file. - Attribute Data Type
-
ub4*/ub4
OCI_ATTR_SERVER_GROUP
OCI_ATTR_SERVER_STATUS
- Mode
-
READ
- Description
-
Returns the current status of the connection by doing a light weight connection health check. Values are:
-
OCI_SERVER_NORMAL
- The connection is alive. -
OCI_SERVER_NOT_CONNECTED
- The connection has been terminated.
-
- Attribute Data Type
-
ub4 *
- Example
-
The following code sample shows how this parameter is used:
ub4 serverStatus = 0 OCIAttrGet((void *)srvhp, OCI_HTYPE_SERVER, (void *)&serverStatus, (ub4 *)0, OCI_ATTR_SERVER_STATUS, errhp); if (serverStatus == OCI_SERVER_NORMAL) printf("Connection is up.\n"); else if (serverStatus == OCI_SERVER_NOT_CONNECTED) printf("Connection is down.\n");
OCI_ATTR_TAF_ENABLED
OCI_ATTR_USER_MEMORY
A.5.1 Authentication Information Handle Attributes
Lists and describes authentication information handle attributes.
These attributes also apply to the user session handle.
See Also:
OCI_ATTR_IAM_PRIVKEY
- Mode
-
WRITE
- Description
-
This attribute specifies the private key value to be used for the connection creation when using IAM-based token authentication. It can be set on both authentication handles (
OCIAuthInfo
) and user session handles (OCISession
). - Attribute Data type
oratext *
- Example Usage
-
1` OCIAttrSet((dvoid *) usrhp, (ub4) OCI_HTYPE_SESSION, (dvoid *) privKeyBuf, (ub4) privKeyLength, OCI_ATTR_IAM_PRIVKEY, errhp);
OCIAttrSet((dvoid *) authp, (ub4) OCI_HTYPE_AUTHINFO, (dvoid *) privKeyBuf, (ub4) privKeyLength, OCI_ATTR_IAM_PRIVKEY, errhp);
OCI_ATTR_TOKEN
- Mode
-
WRITE
- Description
-
This attribute specifies the DB token value to be used for the connection creation. It can be set on both authentication (
OCIAuthInfo
) and user session (OCISession
) handles.OCI_ATTR_IAM_TOKEN
attribute is deprecated.Through this attriute, IAM token or Azure AD Access token type can be provided.
Note:
Two types of DB tokens are supported:
- IAM Token: Both
OCI_ATTR_TOKEN
andOCI_ATTR_IAM_PRIVKEY
attributes must to be provided. - Azure OAuth2 Token: Both
OCI_ATTR_TOKEN
andOCI_ATTR_TOKEN_ISBEARER = TRUE
must be provided.Maximum size of the token supported is 16k.
- IAM Token: Both
See Also:
OCI_ATTR_TOKEN_CBK
- Mode
-
WRITE
- Description
-
This OCIAuthInfo handle attribute enables an application to register a callback function that can renew an expired token. The callback function must be implemented by the application. During session pool expansion, if the token provided by the application during pool creation has expired, then the OCI driver invokes this application registered callback to renew the expired token (and private key for IAM token). The callback function needs to use the
OCIAttrSet()
function on the supplied authentication handle to set the renewed DB token (and private key for IAM token). This enables the session pool to continue creating new sessions successfully. Before the pool is created, the application must set the callback function pointer as an attribute on theOCIAuthInfo
handle of the session pool.OCI_ATTR_IAM_CBK
attribute is deprecated. Oracle recommends that this token callback should avoid blocking calls.
- Attribute Data type
sword (*OCICallbackSetToken)(void *ctx, OCIAuthInfo *authp, ub4 mode);
Where:ctx
: IN argument, is an opaque context that the application has set on the same authentication handle.authp
: IN argument, is the session pool’s authentication handle that OCI passes to the callback, so that the application can set the latest DB token and private key attributes.mode
: IN argument: CurrentlyOCI_DEFAULT
is passed to the callback, indicating this callback is being called as the DB token (or private key for IAM token) has expired and new values need to be provided.Note:
This attribute can be used for both IAM and OAuth2 tokens.
- Returns
-
OCI_SUCCESS
if the DB token settings succeed. Otherwise, it should returnOCI_ERROR
. - Example Usage
-
OCIAttrSet((dvoid *) authp, (ub4) OCI_HTYPE_AUTHINFO, (dvoid *) appCbkFnPtr, (ub4) 0, OCI_ATTR_TOKEN_CBK, errhp);
Sample Callback code that the application needs to write:
sword *callback_fn(void *ctx, OCIAuthInfo *authp, ub4 mode) { OCIError *ehp; sword status=OCI_SUCCESS; /* Code to procure the renewed token */ … /* Set the renewed token value and key value on the auth handle */ /* Use a pre-allocated error handle exclusively for these calls */ status = OCIAttrSet((dvoid *) authp, (ub4) OCI_HTYPE_AUTHINFO, (dvoid *) newtokenBuf, (ub4) newtokenLength, OCI_ATTR_TOKEN, ehp); if (!status) status = OCIAttrSet((dvoid *) authp, (ub4) OCI_HTYPE_AUTHINFO, (dvoid *) newprivKeyBuf, (ub4) newprivKeyLength, OCI_ATTR_IAM_PRIVKEY, ehp); return status; }
OCI_ATTR_TOKEN_CBKCTX
- Mode
-
WRITE
- Description
-
This attribute specifies the opaque context pointer to be passed into the token refreshing callback when it is called by OCI. A pre allocated error handle exclusively for this purpose could be embedded in this context.
OCI_ATTR_TOKEN_CBKCTX
attribute is deprecated. - Attribute Data type
-
void *
- Example Usage
-
OCIAttrSet((dvoid *) authp, (ub4) OCI_HTYPE_AUTHINFO, (dvoid *) appCbkCtx, (ub4) 0, OCI_ATTR_TOKEN_CBKCTX, errhp); (dvoid *) appCbkCtx, (ub4) 0, OCI_ATTR_TOKEN_CBKCTX, errhp);
OCI_ATTR_TOKEN_ISBEARER
- Mode
-
Write
- Description
-
This attribute determines if the token set using
OCI_ATTR_TOKEN
is an IAM or a Bearer token. By default, IAM is the default authentication and so, the value of this attribute is set tofalse.
The value of this attribute must be set totrue
, if the value ofOCI_ATTR_TOKEN
attribute is set to Azure AD Access token.If the value of this attribute is set to true, then it implies that the token is a bearer token.
- Attribute Data Type
-
boolean
OCI_ATTR_FIXUP_CALLBACK
- Mode
-
READ/WRITE
- Description
-
Specifies on the authentication handle attribute the callback passed to
OCISessionGet()
for applications not using an OCISessionPool or using custom pools. For applications using OCISessionPool, this attribute must be set on the authentication handle, which in turn must be set on the session pool handle as the attributeOCI_ATTR_SPOOL_AUTH
.See Also:
-
Session Pool Handle Attributes for more information
-
PL/SQL Callback for Session State Fix Up for more information
-
- Attribute Data Type
-
oratext *
to be provided in the formatschma.package.callback_function
A.5.2 User Session Handle Attributes
Lists and describes user session handle attributes.
The following user session handle attributes also apply to the authentication information handle.
OCI_ATTR_ACTION
- Mode
-
WRITE
- Description
-
The name of the current action within the current module. Can be set to
NULL
. When the current action terminates, set this attribute again with the name of the next action, orNULL
if there is no next action. Can be up to 32 bytes long. - Attribute Data Type
-
oratext *
- Example
OCIAttrSet(session, OCI_HTYPE_SESSION,(void *)"insert into employees", (ub4)strlen("insert into employees"), OCI_ATTR_ACTION, error_handle);
OCI_ATTR_APPCTX_ATTR
Note:
This attribute is not supported with database resident connection pooling.
OCI_ATTR_APPCTX_LIST
Note:
This attribute is not supported with database resident connection pooling.
OCI_ATTR_APPCTX_NAME
Note:
This attribute is not supported with database resident connection pooling.
OCI_ATTR_APPCTX_SIZE
Note:
This attribute is not supported with database resident connection pooling.
OCI_ATTR_APPCTX_VALUE
Note:
This attribute is not supported with database resident connection pooling.
OCI_ATTR_AUDIT_BANNER
OCI_ATTR_AUTOTUNING_ENABLED
OCI_ATTR_CALL_TIME
OCI_ATTR_CERTIFICATE
- Mode
-
WRITE
- Description
-
Specifies the certificate of the client for use in proxy authentication. Certificate-based proxy authentication using
OCI_ATTR_CERTIFICATE
will not be supported in future Oracle Database releases. UseOCI_ATTR_DISTINGUISHED_NAME
orOCI_ATTR_USERNAME
attribute instead. - Attribute Data Type
-
ub1 *
OCI_ATTR_CLIENT_IDENTIFIER
- Mode
-
WRITE
- Description
-
Specifies the user identifier in the session handle. Can be up to 64 bytes long. The value is automatically truncated if the supplied input is more than 64 bytes. It can contain the user name, but do not include the password for security reasons. The first character of the identifier should not be ':'. If it is, the behavior is unspecified.
- Attribute Data Type
-
oratext *
- Example
OCIAttrSet(session, OCI_HTYPE_SESSION,(void *)"janedoe", (ub4)strlen("janedoe"), OCI_ATTR_CLIENT_IDENTIFIER, error_handle);
OCI_ATTR_CLIENT_INFO
OCI_ATTR_COLLECT_CALL_TIME
OCI_ATTR_CONNECTION_CLASS
OCI_ATTR_CURRENT_SCHEMA
- Mode
-
READ/WRITE
- Description
-
Calling
OCIAttrSet()
with this attribute has the same effect as the SQL commandALTER
SESSION
SET
CURRENT_SCHEMA
, if the schema name and the session exist. The schema is altered on the next OCI call that does a round-trip to the server, avoiding an extra round-trip. If the new schema name does not exist, the same error is returned as the error returned fromALTER
SESSION
SET
CURRENT_SCHEMA
. The new schema name is placed before database objects in DML or DDL commands that you then enter.When a client using this attribute communicates with a server that has a software release earlier than Oracle Database 10g Release 2, the
OCIAttrSet()
call is ignored. This attribute is also readable byOCIAttrGet()
. - Attribute Data Type
-
oratext */oratext *
- Example
text schema[] = "hr"; err = OCIAttrSet( (void ) mysessp, OCI_HTYPE_SESSION, (void *)schema, (ub4)strlen( (char *)schema), OCI_ATTR_CURRENT_SCHEMA, (OCIError *)myerrhp);
OCI_ATTR_DBOP
- Mode
-
Write
- Description
-
The name of the database operation set by the client application to be monitored in the database. When you want to end monitoring the current running database operation, set the value to
NULL
. Can be up to 30 bytes long. - Attribute Data Type
-
oratext *
- Example
(void) OCIAttrSet((dvoid *) sess1, (ub4) OCI_HTYPE_SESSION, (dvoid *) dbopname, (ub4) strlen((char *)dbopname), (ub4) OCI_ATTR_DBOP, errhp);
OCI_ATTR_DEFAULT_LOBPREFETCH_SIZE
OCI_ATTR_DISTINGUISHED_NAME
OCI_ATTR_DRIVER_NAME
- Mode
-
READ/WRITE
- Description
-
Specifies the name of the driver layer using OCI, such as JDBC, ODBC, PHP, SQL*Plus, and so on. Names starting with "ORA$" are reserved also. A future application can choose its own name and set it as an aid to fault diagnosability. Set this attribute before executing
OCISessionBegin()
. Pass an array containing up to 9 single-byte characters, including the null terminator. This data is not validated and is passed directly to the server to be displayed in aV$SESSION_CONNECT_INFO
orGV$SESSION_CONNECT_INFO
view. OCI accepts driver names of up to 30 characters, which are displayed in these views. For older databases, only the first 8 characters are displayed. - Attribute Data Type
-
oratext **/oratext *
- Example
... oratext client_driver[9]; ... checkerr(errhp, OCIAttrSet(authp, OCI_HTYPE_SESSION, client_driver, (ub4)(strlen(client_driver)), OCI_ATTR_DRIVER_NAME, errhp)); checkerr(errhp, OCISessionBegin(svchp, errhp, authp, OCI_CRED_RDBMS, OCI_DEFAULT); ...
OCI_ATTR_EDITION
OCI_ATTR_INITIAL_CLIENT_ROLES
OCI_ATTR_LTXID
- Mode
-
READ
- Description
-
This attribute is defined for the session handle and is used to override the default LTXID (logical transaction ID). Applications that associate the logical session with the web user may want to explicitly attach the LTXID to a physical session and explicitly detach the LTXID when the request is complete.
In
READ
mode, this attribute is used to retrieve the LTXID embedded in the OCISession handle. - Attribute Data Type
-
ub1 *
(with length; value is copied; is really aub1
array)
OCI_ATTR_MAX_OPEN_CURSORS
- Mode
-
READ
- Description
-
The maximum number of SQL statements that can be opened in one session. On the server's parameter file, this value is set using the parameter
open_cursors
. The OCI user should leave some threshold and not reach this limit because the server can also open internal statements (cursors) as part of processing user calls. Applications can use this attribute to limit the number of statement handles opened on a given session. This attribute returns a proper value only when connected to a 12.1 server or later.If the cursors in the server session exceed the open cursor setting, then the server returns an error to the client saying that the value for max cursors is exceeded.
Also, note that this value should only be looked at from the session handle after an
OCISessionGet()
or equivalent login call has been done. - Attribute Data Type
-
ub4 *
- Example
OCIAttrGet((void *)usrhp, OCI_HTYPE_SESSION, (void *)&ub4localvariable, (ub4 *)0, OCI_ATTR_MAX_OPEN_CURSORS, errhp);
OCI_ATTR_MIGSESSION
- Mode
-
READ/WRITE
- Description
-
Specifies the session identified for the session handle. Allows you to clone a session from one environment to another, in the same process or between processes. These processes can be on the same system or different systems. For a session to be cloned, the session must be authenticated as migratable.
See Also:
- Attribute Data Type
-
ub1 *
- Example
-
The following code sample shows how this attribute is used:
OCIAttrSet ((void *) authp, (ub4)OCI_HTYPE_SESSION, (void *) mig_session, (ub4) sz, (ub4)OCI_ATTR_MIGSESSION, errhp);
OCI_ATTR_MODULE
- Mode
-
WRITE
- Description
-
The name of the current module running in the client application. When the current module terminates, call with the name of the new module, or use
NULL
if there is no new module. Can be up to 48 bytes long. - Attribute Data Type
-
oratext *
- Example
OCIAttrSet(session, OCI_HTYPE_SESSION,(void *)"add_employee", (ub4)strlen("add_employee"), OCI_ATTR_MODULE, error_handle);
OCI_ATTR_ORA_DEBUG_JDWP
- Mode
-
WRITE
- Description
-
Specifies the external debugger's location the database session is to connect to after logon. This allows the user to initiate debugging of the database application.
The format of the attribute is a list of parameter names and values separated by semi-colons. The parameters will be passed to the
DBMS_ DEBUG_JDWP_CUSTOM.CONNECT_DEBUGGER
package API to connect the database session to the debugger. The parameter name can be a quoted or unquoted PL/SQL identifier. The parameter value is a character string, either quoted by single-quotes, or unquoted, which is terminated by a semi-colon. To escape a single quote in a quoted string, use two consecutive single quotes. No space is allowed anywhere between the parameter names and their values.The attribute should contain at least the
host
andport
parameters that specify the Internet Protocol dotted address or host name of the computer the debugger is running, and the TCP port number the debugger is listening to for debug connections. - Attribute Data Type
-
oratext *
- Example
OCIAttrSet(session, OCI_HTYPE_SESSION, (void *)"janedoe", (ub4)strlen("janedoe"), OCI_ATTR_CLIENT_IDENTIFIER, error_handle);
OCI_ATTR_PASSWORD
OCI_ATTR_PROXY_CLIENT
OCI_ATTR_PROXY_CREDENTIALS
OCI_ATTR_PURITY
- Mode
-
READ/WRITE
- Description
-
An attribute of the
OCIAuthInfo
handle for database resident connection pooling. Values areOCI_ATTR_PURITY_NEW
, the application requires a session not tainted with any prior session state; orOCI_ATTR_PURITY_SELF
, the session can have been used before. If the application does not specify the purity when invokingOCISessionGet()
, then the purity valueOCI_ATTR_PURITY_DEFAULT
is assumed. This later translates to eitherOCI_ATTR_PURITY_NEW
orOCI_ATTR_PURITY_SELF
depending upon whether the application logic is set up to use a new session or to reuse a pooled session. - Attribute Data Type
-
ub4 */ub4
OCI_ATTR_SESSION_STATE
- Mode
-
READ/WRITE
- Description
-
Specifies the current state of the database session. Set to
OCI_SESSION_STATEFUL
if the session is required to perform a database task. If the application is no longer dependent on the current session for subsequent database activity, set toOCI_SESSION_STATELESS
. This attribute is currently applicable only when connected to a Database Resident Connection Pool. It should be used if the application does custom session pooling and does not useOCISessionPool()
. - Attribute Data Type
-
ub1 */ ub1
OCI_ATTR_SHARDING_KEY
- Mode
-
WRITE
- Description
-
For the shard and chunk, specifies the sharding key for the connection request from an OCI session pool or standalone connection.
The
OCIShardingKey *
supplied toOCIAttrSet()
needs to be created withOCIDescriptorAlloc()
specifying the sharding descriptor and then using as many calls as is needed toOCIShardingKeyColumnAdd()
to create the compound sharding key. See OCIShardingKeyColumnAdd() for more information and an example.For custom pools, this attribute associates a sharding key to a given connection.
- Attribute Data Type
-
OCIShardingKey *
- Example
/* Allocate the super sharding key descriptor. */ OCIDescriptorAlloc(envhp,(dvoid **)&shardKey, OCI_DTYPE_SHARDING_KEY, 0,(dvoid **)0))) text *name = “KK”; text *gname = “GOLD”; int empid = 150; /* Add all the columns of the key to form the final shard key. */ OCIShardingKeyColumnAdd(shardKey,(ub1*)&empid, sizeof(empid), SQLT_INT, errhp, OCI_DEFAULT); OCIShardingKeyColumnAdd(shardKey, name, strlen(name), SQLT_CHAR, errhp, OCI_DEFAULT)); OCIShardingKey *shardKey; OCIAttrSet(authp, OCI_HTYPE_AUTHINFO, shardKey, sizeof(shardKey), OCI_ATTR_SHARDING_KEY, errhp);
OCI_ATTR_SHARDING_KEY_B64
- Mode
-
WRITE
- Description
-
Gets the base64 representation of sharding key and super sharding key values for diagnostic purposes.
- Attribute Data Type
-
Oratext *
- Example
char * skeyValue; ub4 skeyValueLen; OCIAttrGet((dvoid *) OCIShardingKey, (ub4) OCI_DTYPE_SHARDING_KEY, (dvoid *) &skeyValue, (ub4 *) &skeyValueLen, OCI_ATTR_SHARDING_KEY_B64, (OCIError * ) errhp);
OCI_ATTR_SUPER_SHARDING_KEY
- Mode
-
WRITE
- Description
-
For the shard and group of chunks, specifies the super sharding key for the connection request from an OCI session pool or standalone connection.
The
OCIShardingKey *
supplied toOCIAttrSet()
needs to be created withOCIDescriptorAlloc()
specifying the sharding descriptor and then using as many calls as is needed toOCIShardingKeyColumnAdd()
to create the compound shard key. See OCIShardingKeyColumnAdd() for more information and an example.For custom pools, this attribute associates a shard group key to a given connection.
- Attribute Data Type
-
OCIShardingKey *
- Example
/* Allocate the sharding key descriptor. */ OCIDescriptorAlloc(envhp,(dvoid **)&shardGroupKey, OCI_DTYPE_SHARDING_KEY, 0, (dvoid **)0)); /* Add the column of the key to form the final super sharding key. */ OCIShardingKeyColumnAdd(shardGroupKey, errhp, gname, strlen(gname), SQLT_CHAR, OCI_DEFAULT)); OCIShardingKey *shardGroupKey; OCIAttrSet(authp, OCI_HTYPE_AUTHINFO, shardGroupKey, sizeof(shardGroupKey), OCI_ATTR_SUPER_SHARDING_KEY, errhp));
OCI_ATTR_TRANS_PROFILE_FOREIGN
- Mode
-
READ
- Description
-
Specifies whether a SQL translation profile for translation of foreign SQL syntax is set in the current session or not.
- Attribute Data Type
-
boolean
- Example
status = OCIAttrGet(authp, OCI_HTYPE_SESSION, (void *)&foreign_sql_syntax, (ub4 *)NULL, OCI_ATTR_TRANS_PROFILE_FOREIGN, errhp);
OCI_ATTR_TRANSACTION_IN_PROGRESS
- Mode
-
READ
- Description
-
If
TRUE
, then the referenced session has a currently active transaction.If
FALSE
, then the referenced session does not have a currently active transaction. - Attribute Data Type
-
boolean *
- Example
{ boolean txnInProgress; OCIAttrGet(usrhp, OCI_HTYPE_SESSION, &txnInProgress, (ub4 *)0, OCI_ATTR_TRANSACTION_IN_PROGRESS, errhp); }
OCI_ATTR_USERNAME
A.6 Administration Handle Attributes
Lists and describes administration handle attributes.
The following attributes are used for the administration handle.
OCI_ATTR_ADMIN_PFILE
- Mode
-
READ/WRITE
- Description
-
Set this attribute before a call to
OCIDBStartup()
to specify the location of the client-side parameter file that is used to start the database. If this attribute is not set, then the server-side parameter file is used. If the server-side parameter file does not exist, an error is returned. - Attribute Data Type
-
oratext */oratext *
A.7 Connection Pool Handle Attributes
Lists and describes connection pool handle attributes.
OCI_ATTR_CONN_TIMEOUT
Note:
Shrinkage of the pool only occurs when there is a network round-trip. If there are no operations, then the connections remain active.
OCI_ATTR_CONN_NOWAIT
- Mode
-
READ/WRITE
- Description
-
This attribute determines if retrial for a connection must be performed when all connections in the pool are found to be busy and the number of connections has reached the maximum.
If this attribute is set, an error is thrown when all the connections are busy and no more connections can be opened. Otherwise, the call waits until it gets a connection.
When read, the attribute value is returned as
TRUE
if it has been set. - Attribute Data Type
-
ub1 */ub1
OCI_ATTR_CONN_BUSY_COUNT
OCI_ATTR_CONN_OPEN_COUNT
OCI_ATTR_CONN_MIN
OCI_ATTR_CONN_MAX
OCI_ATTR_CONN_INCR
A.7.1 Session Pool Handle Attributes
Lists and describes session pool handle attributes.
The following attributes are used for the session pool handle.
OCI_ATTR_SPOOL_AUTH
- Mode
-
WRITE
- Description
-
To make pre-session creation attributes effective on the sessions being retrieved from the session pool, this attribute can be set on the session pool handle. Currently only the following attributes can be set on this
OCIAuthInfo
handle:OCI_ATTR_DRIVER_NAME
OCI_ATTR_EDITION
OCI_ATTR_FIXUP_CALLBACK
If any other attributes are set on the
OCIAuthInfo
handle and theOCIAuthInfo
handle is set on the session pool handle, an error results. Moreover, theOCIAuthInfo
handle should be set on the session pool handle only before callingOCISessionPoolCreate()
with the session pool handle. Setting it afterOCISessionPoolCreate()
results in an error. - Attribute Data Type
-
OCIAuthInfo *
OCI_ATTR_SPOOL_BUSY_COUNT
OCI_ATTR_FOCBK
- Mode
-
READ/WRITE
- Description
-
On
OCIAttrSet()
, defines a TAF callback and context to be associated with each session in the OCI session pool.On
OCIAttrGet()
, populates theOCIFocbkStruct
with the TAF callback and context defined for the session pool.Note:
-
This attribute is already supported for handles of type OCIServer and OCICPool.
-
A TAF callback set on the server handle will override the callback set on the session pool.
-
- Attribute Data Type
-
OCIFocbkStruct *
OCI_ATTR_SPOOL_GETMODE
- Mode
-
READ/WRITE
- Description
-
This attribute determines the behavior of the session pool when all sessions in the pool are found to be busy and the number of sessions has reached the maximum or the pool must create new connections. Values are:
-
OCI_SPOOL_ATTRVAL_WAIT
- The thread waits and blocks until a session is freed or a new one is created. This is the default value. -
OCI_SPOOL_ATTRVAL_TIMEDWAIT
- Keep trying internally for a free session until the time out set byOCI_ATTR_SPOOL_WAIT_TIMEOUT
expires. -
OCI_SPOOL_ATTRVAL_NOWAIT
- An error is returned if there are no free connections or if the pool must create a new connection. -
OCI_SPOOL_ATTRVAL_FORCEGET
- A new session is created even though all the sessions are busy and the maximum number of sessions has been reached.OCISessionGet()
returns a warning. In this case, if new sessions are created that have exceeded the maximum,OCISessionGet()
returns a warning.Note that if this value is set, it is possible that there can be an attempt to create more sessions than can be supported by the instance of the Oracle database. In this case, the server returns the following error:
ORA 00018 - Maximum number of sessions exceeded
In this case, the error is propagated to the session pool user.
When read, the appropriate attribute value is returned.
-
- Attribute Data Type
-
ub1 */ ub1
OCI_ATTR_SPOOL_INCR
OCI_ATTR_SPOOL_MAX
OCI_ATTR_SPOOL_MAX_LIFETIME_SESSION
- Mode
-
READ/WRITE
- Description
-
This attribute sets the lifetime (in seconds) for all the sessions in the pool. Sessions in the pool are terminated when they have reached their lifetime. In the case when
OCI_ATTR_SPOOL_TIMEOUT
is also set, the session will be terminated if either the idle time out happens or the max lifetime setting is exceeded. - Attribute Data Type
-
ub4 */ ub4
OCI_ATTR_SPOOL_MAX_USE_SESSION
- Mode
-
WRITE
- Description
-
Sets the maximum number of times one session can be checked out of the session pool, after which the session is automatically destroyed. The default value is 0, which means there is no limit. This value can also be set in the
oraaccess.xml
client-side configuration file under the<session_pool>
section as<max_use_session>
. - Attribute Data Type
-
ub4
OCI_ATTR_SPOOL_MIN
OCI_ATTR_SPOOL_OPEN_COUNT
OCI_ATTR_SPOOL_STMTCACHESIZE
- Mode
-
READ/WRITE
- Description
-
Sets the default statement cache size to this value for each of the sessions in a session pool. The statement cache size for a particular session in the pool can, at any time, be overridden by using
OCI_ATTR_STMTCACHESIZE
on that session.See Also:
- Attribute Data Type
-
ub4 *
/ub4
OCI_ATTR_SPOOL_TIMEOUT
- Mode
-
READ/WRITE
- Description
-
The sessions idle for more than this time (in seconds) are terminated periodically to maintain an optimum number of open sessions. This attribute can be set dynamically. If this attribute is not set, the least recently used sessions may be timed out if and when space in the pool is required. OCI only checks for timed out sessions when it releases one back to the pool. See OCI_ATTR_SPOOL_MAX_LIFETIME_SESSION for more information.
- Attribute Data Type
-
ub4 */ ub4
OCI_ATTR_SPOOL_WAIT_TIMEOUT
- Mode
-
READ/WRITE
- Description
-
This is the time out (in milliseconds) applied for the
OCISessionGet()
call while waiting for a free session, when theOCI_ATTR_SPOOL_GETMODE
property is set toOCI_SPOOL_ATTRVAL_TIMEDWAIT
. This is also applicable in case of sharding, where theOCISessionGet()
call waits for a free session to an instance with writable chunks. - Attribute Data Type
-
ub4 */ ub4
OCI_ATTR_SPOOL_MAX_PER_SHARD
A.8 Transaction Handle Attributes
Lists and describes transaction handle attributes.
The following attributes are used for the transaction handle.
OCI_ATTR_TRANS_NAME
OCI_ATTR_TRANS_TIMEOUT
OCI_ATTR_XID
A.9 Statement Handle Attributes
Lists and describes statement handle attributes.
The following attributes are used for the statement handle.
OCI_ATTR_BIND_COUNT
- Mode
-
READ
- Description
-
Returns the number of bind positions on the statement handle.
- Attribute Data Type
-
ub4 *
- Example
OCIHandleAlloc(env,(void **) &pStatement, OCI_HTYPE_STMT, (size_t)0, (void **)0); OCIStmtPrepare (pStatement, err, pszQuery, (ub4)strlen(pszQuery), (ub4)OCI_NTV_SYNTAX, (ub4)OCI_DEFAULT); OCIAttrGet(pStatement, OCI_HTYPE_STMT, &iNbParameters, NULL, OCI_ATTR_BIND_COUNT, err);
OCI_ATTR_CHNF_REGHANDLE
- Mode
-
WRITE
- Description
-
When this attribute is set to the appropriate subscription handle, execution of the query also creates the registration of the query for continuous query notification.
See Also:
- Attribute Data Type
-
OCISubscription *
- Example
/* Associate the statement with the subscription handle */ OCIAttrSet (stmthp, OCI_HTYPE_STMT, subscrhp, 0, OCI_ATTR_CHNF_REGHANDLE, errhp);
OCI_ATTR_CQ_QUERYID
OCI_ATTR_CURRENT_POSITION
OCI_ATTR_ENV
OCI_ATTR_FETCH_ROWID
OCI_ATTR_IMPLICIT_RESULT_COUNT
OCI_ATTR_NUM_DML_ERRORS
OCI_ATTR_PARAM_COUNT
- Mode
-
READ
- Description
-
Gets the number of columns in the select-list for the statement associated with the statement handle.
- Attribute Data Type
-
ub4 *
- Example
... int i = 0; ub4 parmcnt = 0; ub2 type = 0; OCIParam *colhd = (OCIParam *) 0; /* column handle */ /* Describe of a select-list */ OraText *sqlstmt = (OraText *)"SELECT * FROM employees WHERE employee_id = 100"; checkerr(errhp, OCIStmtPrepare(stmthp, errhp, (OraText *)sqlstmt, (ub4)strlen((char *)sqlstmt), (ub4) OCI_NTV_SYNTAX, (ub4) OCI_DEFAULT)); checkerr(errhp, OCIStmtExecute(svchp, stmthp, errhp, 1, 0, (OCISnapshot *)0, (OCISnapshot *)0, OCI_DESCRIBE_ONLY)); /* Get the number of columns in the select list */ checkerr(errhp, OCIAttrGet((void *)stmthp, OCI_HTYPE_STMT, (void *)&parmcnt, (ub4 *)0, OCI_ATTR_PARAM_COUNT, errhp)); /* Go through the column list and retrieve the data type of each column. You start from pos = 1 */ for (i = 1; i <= parmcnt; i++) { /* Get parameter for column i */ checkerr(errhp, OCIParamGet((void *)stmthp, OCI_HTYPE_STMT, errhp, (void **)&colhd, i)); /* Get data-type of column i */ type = 0; checkerr(errhp, OCIAttrGet((void *)colhd, OCI_DTYPE_PARAM, (void *)&type, (ub4 *)0, OCI_ATTR_DATA_TYPE, errhp)); } ...
OCI_ATTR_PARSE_ERROR_OFFSET
OCI_ATTR_PREFETCH_MEMORY
- Mode
-
WRITE
- Description
-
Sets the memory level for top-level rows to be prefetched. Rows up to the specified top-level row count are fetched if the memory level occupies no more than the specified memory usage limit. The default value is 0, which means that memory size is not included in computing the number of rows to prefetch.
- Attribute Data Type
-
ub4 *
OCI_ATTR_PREFETCH_ROWS
OCI_ATTR_ROW_COUNT
- Mode
-
READ
- Description
-
Returns the number of rows processed so far after
SELECT
statements. ForINSERT
,UPDATE
, andDELETE
statements, it is the number of rows processed by the most recent statement. The default value is 1.For nonscrollable cursors,
OCI_ATTR_ROW_COUNT
is the total number of rows fetched into user buffers with theOCIStmtFetch2()
calls issued since this statement handle was executed. Because they are forward sequential only, this also represents the highest row number seen by the application.For scrollable cursors,
OCI_ATTR_ROW_COUNT
represents the maximum (absolute) row number fetched into the user buffers. Because the application can arbitrarily position the fetches, this need not be the total number of rows fetched into the user's buffers since the (scrollable) statement was executed.Beginning with Oracle Database Release 12.1, using the attribute
OCI_ATTR_UB8_ROW_COUNT
is preferred to using the attributeOCI_ATTR_ROW_COUNT
if row count values can exceed the value ofUB4MAXVAL
for an OCI application. If the row count exceeds the value ofUB4MAXVAL
and the application uses the attributeOCI_ATTR_ROW_COUNT
, a call usingOCIAttrGet()
will return an error. - Attribute Data Type
-
ub4 *
OCI_ATTR_DML_ROW_COUNT_ARRAY
- Mode
-
READ
- Description
-
Returns an array of row counts affected by each iteration of an array DML statement. The row count for iteration i can be obtained by looking up array[i-1].
Without
OCI_BATCH_ERRORS
mode, OCIStmtExecute() stops execution with the first erroneous iteration. In such a scenario, the array returned by theOCI_ATTR_DML_ROW_COUNT_ARRAY
attribute only contains valid row counts up to and including the last successful iteration. WhenOCI_RETURN_ROW_COUNT_ARRAY
mode is used in conjunction withOCI_BATCH_ERRORS
mode, the returned row-count array contains the actual number of rows affected per successful iteration and 0 for iterations that resulted in errors.This attribute works only when the statement is executed in mode
OCI_RETURN_ROW_COUNT_ARRAY
at the time of using OCIStmtExecute().Use this attribute only after an array DML operation and while using
OCI_RETURN_ROW_COUNT_ARRAY
mode in OCIStmtExecute().Any attempt to query this attribute after any other operation (other than an array DML) or without passing this mode will result in an
OCI_ERROR
(ORA-24349
). - Attribute Data Type
-
ub8 *
- Example
int deptarray[]={10,20,30}; int iters = 3; ub8 *rowcounts; ub4 rowCountArraySize; /*Statement prepare */ text *updatesal = (text *)"UPDATE EMP set sal = sal+100 where deptno = :dept" OCIStmtPrepare2 ((OCISvcCtx *)svchp,(OCIStmt **)&stmthp, (OCIError *)errhp, (text *)updatesal, (ub4)sizeof(updatesal)-1, (oratext *)NULL, (ub4) 0, (ub4)OCI_NTV_SYNTAX, (ub4)OCI_DEFAULT); /*Array bind*/ OCIBindByPos (stmthp, &bndhp, errhp, 1, deptarray, sizeof(deptarray[0]), SQLT_INT, (ub2 *) 0, (ub2 *) 0, (ub4) 0, (ub4) 0, (ub4 *) 0, (ub4) OCI_DEFAULT); /* Pass new MODE for Array DML rowcounts; also, if an error occurred for any iteration and you want to get the number of rows updated for the rest of the iterations.*/ OCIStmtExecute(svchp, stmthp, errhp, iters, (ub4) 0, 0, 0, OCI_BATCH_ERRORS | OCI_RETURN_ROWCOUNT_ARRAY); OCIAttrGet (stmthp, (ub4) OCI_HTYPE_STMT, (ub8 *)&rowcounts, &rowCountArraySize, OCI_ATTR_DML_ROW_COUNT_ARRAY, errhp);
OCI_ATTR_ROWID
OCI_ATTR_ROWS_FETCHED
- Mode
-
READ
- Description
-
Indicates the number of rows that were successfully fetched into the user's buffers in the last fetch or execute with nonzero iterations. It can be used for both scrollable and nonscrollable statement handles.
- Attribute Data Type
-
ub4 *
- Example
ub4 rows; ub4 sizep = sizeof(ub4); OCIAttrGet((void *) stmhp, (ub4) OCI_HTYPE_STMT, (void *)& rows, (ub4 *) &sizep, (ub4)OCI_ATTR_ROWS_FETCHED, errhp);
OCI_ATTR_SQL_ID
- Mode
-
READ
- Dexcription
-
Gets the
SQL_ID
for a specific SQL statement from the server and makes it available on the client in a statement handle. - Attribute Data Type
-
ub4 *
- Example
-
In an
OCIStmtPrepare2()
, specifyOCI_PREP2_GET_SQL_ID
as the mode. ThisOCI_PREP2_GET_SQL_ID
mode should be ORed with any other mode. For example:OCIStmtPrepare2((dvoid *)ctxptr->svchp, &stmthp, (dvoid *)ctxptr->errhp, insStmt, sizeof(insStmt), (const oratext *)0, (ub4)0, OCI_NTV_SYNTAX, OCI_DEFAULT | OCI_PREP2_GET_SQL_ID);
You can do a bind or define operation and then execute on the statement.
The following code example shows how to obtain the
SQL_ID
.ub4 sqlidLen; oratext *sqlid; OCIAttrGet(stmthp, OCI_HTYPE_STMT, &sqlid, (ub4 *)&sqlidLen, OCI_ATTR_SQL_ID, ctxptr->errhp);
OCI_ATTR_SQLFNCODE
- Mode
-
READ
- Description
-
Returns the function code of the SQL command associated with the statement.
- Attribute Data Type
-
ub2 *
- Notes
-
Table A-1 lists the SQL command codes.
Table A-1 Function Code of the SQL Command Associated with the SQL Statement
Function Code | SQL Statement | Function Code | SQL Statement | Function Code | SQL Statement |
---|---|---|---|---|---|
01 |
CREATE TABLE |
43 |
DROP EXTERNAL DATABASE |
85 |
TRUNCATE TABLE |
02 |
SET ROLE |
44 |
CREATE DATABASE |
86 |
TRUNCATE CLUSTER |
03 |
INSERT |
45 |
ALTER DATABASE |
87 |
CREATE BITMAPFILE |
04 |
SELECT |
46 |
CREATE ROLLBACK SEGMENT |
88 |
ALTER VIEW |
05 |
UPDATE |
47 |
ALTER ROLLBACK SEGMENT |
89 |
DROP BITMAPFILE |
06 |
DROP ROLE |
48 |
DROP ROLLBACK SEGMENT |
90 |
SET CONSTRAINTS |
07 |
DROP VIEW |
49 |
CREATE TABLESPACE |
91 |
CREATE FUNCTION |
08 |
DROP TABLE |
50 |
ALTER TABLESPACE |
92 |
ALTER FUNCTION |
09 |
DELETE |
51 |
DROP TABLESPACE |
93 |
DROP FUNCTION |
10 |
CREATE VIEW |
52 |
ALTER SESSION |
94 |
CREATE PACKAGE |
11 |
DROP USER |
53 |
ALTER USER |
95 |
ALTER PACKAGE |
12 |
CREATE ROLE |
54 |
COMMIT (WORK) |
96 |
DROP PACKAGE |
13 |
CREATE SEQUENCE |
55 |
ROLLBACK |
97 |
CREATE PACKAGE BODY |
14 |
ALTER SEQUENCE |
56 |
SAVEPOINT |
98 |
ALTER PACKAGE BODY |
15 |
(NOT USED) |
57 |
CREATE CONTROL FILE |
99 |
DROP PACKAGE BODY |
16 |
DROP SEQUENCE |
58 |
ALTER TRACING |
157 |
CREATE DIRECTORY |
17 |
CREATE SCHEMA |
59 |
CREATE TRIGGER |
158 |
DROP DIRECTORY |
18 |
CREATE CLUSTER |
60 |
ALTER TRIGGER |
159 |
CREATE LIBRARY |
19 |
CREATE USER |
61 |
DROP TRIGGER |
160 |
CREATE JAVA |
20 |
CREATE INDEX |
62 |
ANALYZE TABLE |
161 |
ALTER JAVA |
21 |
DROP INDEX |
63 |
ANALYZE INDEX |
162 |
DROP JAVA |
22 |
DROP CLUSTER |
64 |
ANALYZE CLUSTER |
163 |
CREATE OPERATOR |
23 |
VALIDATE INDEX |
65 |
CREATE PROFILE |
164 |
CREATE INDEXTYPE |
24 |
CREATE PROCEDURE |
66 |
DROP PROFILE |
165 |
DROP INDEXTYPE |
25 |
ALTER PROCEDURE |
67 |
ALTER PROFILE |
166 |
ALTER INDEXTYPE |
26 |
ALTER TABLE |
68 |
DROP PROCEDURE |
167 |
DROP OPERATOR |
27 |
EXPLAIN |
69 |
(NOT USED) |
168 |
ASSOCIATE STATISTICS |
28 |
GRANT |
70 |
ALTER RESOURCE COST |
169 |
DISASSOCIATE STATISTICS |
29 |
REVOKE |
71 |
CREATE SNAPSHOT LOG |
170 |
CALL METHOD |
30 |
CREATE SYNONYM |
72 |
ALTER SNAPSHOT LOG |
171 |
CREATE SUMMARY |
31 |
DROP SYNONYM |
73 |
DROP SNAPSHOT LOG |
172 |
ALTER SUMMARY |
32 |
ALTER SYSTEM SWITCH LOG |
74 |
CREATE SNAPSHOT |
173 |
DROP SUMMARY |
33 |
SET TRANSACTION |
75 |
ALTER SNAPSHOT |
174 |
CREATE DIMENSION |
34 |
PL/SQL EXECUTE |
76 |
DROP SNAPSHOT |
175 |
ALTER DIMENSION |
35 |
LOCK |
77 |
CREATE TYPE |
176 |
DROP DIMENSION |
36 |
NOOP |
78 |
DROP TYPE |
177 |
CREATE CONTEXT |
37 |
RENAME |
79 |
ALTER ROLE |
178 |
DROP CONTEXT |
38 |
COMMENT |
80 |
ALTER TYPE |
179 |
ALTER OUTLINE |
39 |
AUDIT |
81 |
CREATE TYPE BODY |
180 |
CREATE OUTLINE |
40 |
NO AUDIT |
82 |
ALTER TYPE BODY |
181 |
DROP OUTLINE |
41 |
ALTER INDEX |
83 |
DROP TYPE BODY |
182 |
UPDATE INDEXES |
42 |
CREATE EXTERNAL DATABASE |
84 |
DROP LIBRARY |
183 |
ALTER OPERATOR |
OCI_ATTR_STATEMENT
OCI_ATTR_STMTCACHE_CBKCTX
OCI_ATTR_STMT_IS_RETURNING
OCI_ATTR_STMT_STATE
- Mode
-
READ
- Description
-
Returns the fetch state of that statement. This attribute can be used by the caller to determine if the session can be used in another service context or if it is still needed in the current set of data access calls. Basically, if you are in the middle of a fetch-execute cycle, then you do not want to release the session handle for another statement execution. Valid values are:
-
OCI_STMT_STATE_INITIALIZED
-
OCI_STMT_STATE_EXECUTED
-
OCI_STMT_STATE_END_OF_FETCH
-
- Attribute Data Type
-
ub4 *
OCI_ATTR_STMT_TYPE
- Mode
-
READ
- Description
-
The type of statement associated with the handle. Valid values are:
-
OCI_STMT_SELECT
-
OCI_STMT_UPDATE
-
OCI_STMT_DELETE
-
OCI_STMT_INSERT
-
OCI_STMT_CREATE
-
OCI_STMT_DROP
-
OCI_STMT_ALTER
-
OCI_STMT_BEGIN
(PL/SQL statement) -
OCI_STMT_DECLARE
(PL/SQL statement) -
OCI_STMT_CALL
(PL/SQL statement) -
OCI_STMT_MERGE
(PL/SQL statement)
-
- Attribute Data Type
-
ub2 *
OCI_ATTR_UB8_ROW_COUNT (Recommended over OCI_ATTR_ROW_COUNT)
- Mode
-
READ
- Description
-
For
SELECT
statements, returns the cumulative number of rows fetched from a result set. ForINSERT
,UPDATE
, andDELETE
statements, this attribute returns the number of rows processed by the statement. The default value is 1.For non-scrollable cursors,
OCI_ATTR_UB8_ROW_COUNT
is the total number of rows fetched into user buffers with theOCIStmtFrtch()
or OCIStmtFetch2() calls issued since this statement handle was executed. For these non-scrollable cursors, this also represents the highest row number seen by the application.If using the attribute
OCI_ATTR_ROW_COUNT
and the row count returned is larger thanUB4MAXVAL
, then one or both of the following errors may be returned:ORA-03148. OCI_ATTR_ROW_COUNT cannot see row counts larger than UB4MAXVAL
- Attribute Data Type
-
ub8 *
A.10 Bind Handle Attributes
Lists and describes bind handle attributes.
The following attributes are used for the bind handle.
OCI_ATTR_CHAR_COUNT
OCI_ATTR_CHARSET_FORM
- Mode
-
READ/WRITE
- Description
-
Character set form of the bind handle. The default form is
SQLCS_IMPLICIT
. Setting this attribute causes the bind handle to use the database or national character set on the client side. Set this attribute toSQLCS_NCHAR
for the national character set orSQLCS_IMPLICIT
for the database character set. - Attribute Data Type
-
ub1 *
OCI_ATTR_CHARSET_ID
- Mode
-
READ/WRITE
- Description
-
Character set ID of the bind handle. If the character set of the input data is UTF-16, the user must set the character set ID to
OCI_UTF16ID
(replaces the deprecatedOCI_UC2SID
, which is retained for backward compatibility). The bind value buffer is assumed to be autext
buffer, so length semantics for input length pointers and return values changes to character semantics (number ofutext
s). However, the size of the bind value buffer in the precedingOCIBind
call must be stated in bytes.If
OCI_ATTR_CHARSET_FORM
is set, thenOCI_ATTR_CHARSET_ID
should be set only afterward. SettingOCI_ATTR_CHARSET_ID
before settingOCI_ATTR_CHARSET_FORM
causes unexpected results. - Attribute Data Type
-
ub2 *
OCI_ATTR_COLLATION_ID
- Mode
-
READ/WRITE
- Description
-
Sets the derived collation of a placeholder expression corresponding to this bind handle in a SQL statement. The attribute is relevant only for bind variables with character data types.
You can set the
OCI_ATTR_COLLATION_ID
attribute on a bind variable handle to any of the supported collation IDs. Collation IDs of both named collations and pseudo-collations are allowed. The attribute value is passed to the server with other bind information and the corresponding bind variable reference, formally known as SQL placeholder expression, assumes the provided collation at the coercibility level 0. If the attribute value isOCI_COLLATION_NONE
(the default value), the collation of the bind variable isUSING_NLS_COMP
at the coercibility level 4.OCI does not check whether the collation is valid for a given data type of a bind variable. If
OCI_ATTR_COLLATION_ID
is set for a non-character data type variable, it is ignored by the server.Collation of bind variables is currently ignored in PL/SQL expressions. For forward compatibility reasons, the
OCI_ATTR_COLLATION_ID
attribute should not be set for bind variables passed to an anonymous PL/SQL block, unless the variables are referenced exclusively in SQL statements.Note:
You can use the SQL built-in functions
NLS_COLLATION_ID
andNLS_COLLATION_NAME
to map between values of the attribute, which are collation IDs, and collation names used in SQL syntax.See Also:
-
Oracle Database Globalization Support Guide for information on how this set collation influences query processing
- Attribute Data Type
-
ub4 *
OCI_ATTR_MAXCHAR_SIZE
OCI_ATTR_MAXDATA_SIZE
OCI_ATTR_PDPRC
- Mode
-
WRITE
- Description
-
Specifies packed decimal precision. For
SQLT_PDN
values, the precision should be equal to2*(value_sz-1)
. ForSQLT_SLS
values, the precision should be equal to(value_sz-1)
.After a bind or define, this value is initialized to zero. The
OCI_ATTR_PDPRC
attribute should be set first, followed byOCI_ATTR_PDSCL
. If either of these values must be changed, first perform a rebind/redefine operation, and then reset the two attributes in order. - Attribute Data Type
-
ub2 *
OCI_ATTR_PDSCL
- Mode
-
WRITE
- Description
-
Specifies the scale for packed decimal values.
After a bind or define, this value is initialized to zero. The
OCI_ATTR_PDPRC
attribute should be set first, followed byOCI_ATTR_PDSCL
. If either of these values must be changed, first perform a rebind/redefine operation, and then reset the two attributes in order. - Attribute Data Type
-
sb2 *
OCI_ATTR_ROWS_RETURNED
A.11 Define Handle Attributes
Lists and describes define handle attributes.
The following attributes are used for the define handle.
OCI_ATTR_CHAR_COUNT
- Mode
-
WRITE
- Description
-
This attribute is deprecated.
Sets the number of characters in character type data. This specifies the number of characters desired in the define buffer. The define buffer length as specified in the define call must be greater than number of characters.
- Attribute Data Type
-
ub4 *
OCI_ATTR_CHARSET_FORM
- Mode
-
READ/WRITE
- Description
-
The character set form of the define handle. The default form is
SQLCS_IMPLICIT
. Setting this attribute causes the define handle to use the database or national character set on the client side. Set this attribute toSQLCS_NCHAR
for the national character set orSQLCS_IMPLICIT
for the database character set. - Attribute Data Type
-
ub1 *
OCI_ATTR_CHARSET_ID
- Mode
-
READ/WRITE
- Description
-
The character set ID of the define handle. If the character set of the output data should be UTF-16, the user must set the character set IDOTT to
OCI_UTF16ID
. The define value buffer is assumed to be autext
buffer, so length semantics for indicators and return values changes to character semantics (number of utexts). However, the size of the define value buffer in the precedingOCIDefine
call must be stated in bytes.If
OCI_ATTR_CHARSET_FORM
is set, thenOCI_ATTR_CHARSET_ID
should be set only afterward. SettingOCI_ATTR_CHARSET_ID
before settingOCI_ATTR_CHARSET_FORM
causes unexpected results. - Attribute Data Type
-
ub2 *
OCI_ATTR_LOBPREFETCH_LENGTH
- Mode
-
READ/WRITE
- Description
-
Specifies if the LOB length and the chunk size for the LOB locators should be prefetched along with the descriptor if the column is a LOB column. Setting it to
TRUE
will enable the prefetching and this attribute setting is also required for prefetching the LOB data using the attributeOCI_ATTR_LOBPREFETCH_SIZE
. - Attribute Data Type
-
boolean */boolean
OCI_ATTR_LOBPREFETCH_SIZE
OCI_ATTR_MAXCHAR_SIZE
OCI_ATTR_PDPRC
- Mode
-
WRITE
- Description
-
Specifies packed decimal precision. For SQLT_PDN values, the precision should be equal to
2*(value_sz-1)
. For SQLT_SLS values, the precision should be equal to(value_sz-1)
.After a bind or define, this value is initialized to zero. The
OCI_ATTR_PDPRC
attribute should be set first, followed byOCI_ATTR_PDSCL
. If either of these values must be changed, first perform a rebind/redefine operation, and then reset the two attributes in order. - Attribute Data Type
-
ub2 *
OCI_ATTR_PDSCL
- Mode
-
WRITE
- Description
-
Specifies the scale for packed decimal values.
After a bind or define, this value is initialized to zero. The
OCI_ATTR_PDPRC
attribute should be set first, followed byOCI_ATTR_PDSCL
. If either of these values must be changed, first perform a rebind/redefine operation, and then reset the two attributes in order. - Attribute Data Type
-
sb2 *
A.12 Describe Handle Attributes
Lists and describes describe handle attributes.
The following attributes are used for the describe handle.
OCI_ATTR_PARAM
- Mode
-
READ
- Description
-
Points to the root of the description. Used for subsequent calls to OCIAttrGet() and OCIParamGet().
- Attribute Data Type
-
ub4 *
OCI_ATTR_PARAM_COUNT
OCI_ATTR_SHOW_INVISIBLE_COLUMNS
- Mode
-
WRITE
- Description
-
This attribute requests OCIDescribeAny() to also get the metadata for invisible columns. You can use OCIAttrGet() to determine whether a column is invisible or not.
- Attribute Data Type
-
boolean *
- Example
boolean showInvisibleCols = TRUE; ub1 colInvisible[MAX_COLS]; OCIAttrSet(descHandle, OCI_HTYPE_DESCRIBE, &showInvisibleCols, 0, OCI_ATTR_SHOW_INVISIBLE_COLUMNS, errHandle); if (rc = OCIDescribeAny(svcHandle, errHandle, (dvoid*)table, strlen(table), OCI_OTYPE_NAME, 1, OCI_PTYPE_TABLE, descHandle)) { OCIHandleFree(descHandle, OCI_HTYPE_DESCRIBE); return OCI_ERROR; } /* Get the number of columns. */ OCIAttrGet(parHandle, OCI_DTYPE_PARAM, &nCols, 0, OCI_ATTR_NUM_COLS, errHandle); /* Get the column list. */ OCIAttrGet(parHandle, OCI_DTYPE_PARAM, &lstHandle, 0, OCI_ATTR_LIST_COLUMNS, errHandle); /* Loop through the columns. */ for (i = 1; i <= nCols; i++) { OCIParamGet(lstHandle, OCI_DTYPE_PARAM, errHandle, (dvoid*)&colHandle, i); OCIAttrGet(colHandle, OCI_DTYPE_PARAM, &colName[i-1], &len, OCI_ATTR_NAME, errHandle); OCIAttrGet(colHandle, OCI_DTYPE_PARAM, &(colType[i-1]), 0, OCI_ATTR_DATA_TYPE, errHandle); OCIAttrGet(colHandle, OCI_DTYPE_PARAM, &colInvisible[i-1], 0, OCI_ATTR_SHOW_INVISIBLE_COLUMNS, errHandle); if (colInvisible & OCI_ATTR_SHOW_INVISIBLE_COLUMNS) printf("Column is invisible\n"); }
A.13 Parameter Descriptor Attributes
Lists and describes parameter descriptor attributes.
The following attributes are used for the parameter descriptor.
See Also:
Describing Schema Metadata for a detailed list of parameter descriptor attributes.
A.14 Shard Instance Descriptor Attributes
Lists and describes shard instance descriptor attributes.
This descriptor is returned by OCIShardInstancesGet()
used only by custom pools, which essentially contains the instance name where the data matching the provided sharding key resides, and an indication if that shard is writable on that instance.
The following attributes are used for the shard instance descriptor.
OCI_ATTR_INSTNAME
- Mode
-
READ
- Description
-
This attribute can be used to find the shard instance name out of a shard instance descriptor that is filed by an
OCIShardInstancesGet()
call. This attribute can also be used on the service context to return the shard instance name for a given connection. When called as an event handle attribute,OCIAttrGet()
retrieves the name of the instance that has been affected by this event. This is also a server handle attribute. - Attribute Data Type
-
oratext **
- Example
OCIAttrGet(shardInstance, (ub4) OCI_DTYPE_SHARD_INST,(dvoid *)&iName, (ub4 *)&iNameLen, OCI_ATTR_INSTNAME, (OCIError *)errhp);
OCI_ATTR_SHARD_HAS_WRITABLECHUNK
- Mode
-
READ
- Description
-
Returns
TRUE
if the shard instance has writable chunks. For custom pool implementations, this helps the pool to determine if a connection to that particular shard instance can be dispensed. If the application can work with read only shards instead of writable chunks, the pool can dispense it; otherwise, it can implement a retrial logic to tryOCIShardInstancesGet()
until it returns shard instance information having writable chunks. This feature is helpful during chunk migrations. - Attribute Data Type
boolean *
A.15 SODA Document Handle Attributes
The OCISodaDoc
document handle has the following attributes. The key, last-modified time stamp, creation time stamp, version, content, and media type attributes represent document components. JSON charset ID is a read-only character set ID set by SODA. Detect JSON Encoding is a flag for working with Unicode encoding JSON content.
-
Key —
OCI_ATTR_SODA_KEY
-
Last-modified time stamp —
OCI_ATTR_SODA_LASTMOD_TIMESTAMP
-
Creation time stamp —
OCI_ATTR_SODA_CREATE_TIMESTAMP
-
Version —
OCI_ATTR_SODA_VERSION
-
Content —
OCI_ATTR_SODA_CONTENT
-
Media type ("application/json" for JSON documents) —
OCI_ATTR_SODA_MEDIA_TYPE
-
JSON character set ID —
OCI_ATTR_SODA_JSON_CHARSET_ID
-
Detect JSON encoding —
OCI_ATTR_SODA_DETECT_JSON_ENC
OCI_ATTR_SODA_KEY
OCI_ATTR_SODA_LASTMOD_TIMESTAMP
OCI_ATTR_SODA_CREATE_TIMESTAMP
OCI_ATTR_SODA_VERSION
OCI_ATTR_SODA_CONTENT
- Mode
-
READ/WRITE
- Description
-
The document content. Note that for
OCISodaInsertAndGet()
,OCISodaInsertAndGetWithCtnt()
, andOCISodaReplOneAndGetWithKey()
, these functions return the handle to the result document containing all components except the content, so this attribute is not needed for these calls. - Attribute Data Type
-
oratext *
OCI_ATTR_SODA_JSON_CHARSET_ID
OCI_ATTR_SODA_DETECT_JSON_ENC
OCI_ATTR_SODA_MEDIA_TYPE
A.16 SODA Collection Handle Attributes
Lists and describes the OCI SODA collection handle attributes.
Collection is composed of multiple components.
OCI_ATTR_SODA_DESCRIPTOR
is a special case. When you pass
OCI_ATTR_SODA_DESCRIPTOR
to OCIAttrGet()
, you
get metadata for the collection in one chunk, in JSON form. In addition,
OCI_ATTR_SODA_COLL_NAME
, the collection name, is not part of
collection metadata (it is not a collection metadata component). It is stored
separately in SODA, so it is also a special case. If you use
OCI_ATTR_SODA_DESCRIPTOR
to fetch collection metadata in JSON,
the collection name is not included.
The rest of these attributes fetch individual metadata components. They are provided for convenience (alternatively, you could get collection metadata using OCI_ATTR_SODA_DESCRIPTOR
. That metadata contains all of the components, but it is in JSON form, so your application might need to parse the JSON to retrieve values of specific components). All of these attributes are READ
only and allow you to examine the metadata for your existing collection.
See Also:
Oracle Database Introduction to Simple Oracle Document Access (SODA) for reference information about these SODA
collection metadata components. All the metadata components that correspond to
these collection handle attributes (except for
OCI_ATTR_SODA_DESCRIPTOR
and
OCI_ATTR_SODA_COLL_NAME
), are described in this
chapter.
The following is a list of all collection attributes followed by descriptions of each.
-
Collection Name —
OCI_ATTR_SODA_COLL_NAME
-
Descriptor —
OCI_ATTR_SODA_DESCRIPTOR
-
Schema —
OCI_ATTR_SODA_SCHEMA
-
Table Name —
OCI_ATTR_SODA_TABLE_NAME
-
View Name —
OCI_ATTR_SODA_VIEW_NAME
-
Key Column Name —
OCI_ATTR_SODA_KEY_COL_NAME
-
Key Column SQL Type —
OCI_ATTR_SODA_KEY_SQL_TYPE
-
Key Column Max Length —
OCI_ATTR_SODA_KEY_MAX_LEN
-
Key Column Assignment Method —
OCI_ATTR_SODA_KEY_ASSIGN_METHOD
-
Key Column Sequence Name —
OCI_ATTR_SODA_KEY_SEQ_NAME
-
Content Column Name —
OCI_ATTR_SODA_CTNT_COL_NAME
-
Content Column SQL Type —
OCI_ATTR_SODA_CTNT_SQL_TYPE
-
Content Column Max Length —
OCI_ATTR_SODA_CTNT_MAX_LEN
-
Content Column JSON Validation —
OCI_ATTR_SODA_CTNT_VALIDATION
-
Content Column SecureFiles LOB Compression —
OCI_ATTR_SODA_CTNT_COMPRESS
-
Content Column SecureFiles LOB Cache —
OCI_ATTR_SODA_CTNT_CACHE
-
Content Column SecureFiles LOB Encryption —
OCI_ATTR_SODA_CTNT_ENCRYPT
-
Version Column Name —
OCI_ATTR_SODA_VERSION_COL_NAME
-
Version Generation Method —
OCI_ATTR_SODA_VERSION_METHOD
-
Last-Modified Time Stamp Column Name —
OCI_ATTR_SODA_MODTIME_COL_NAME
-
Last-Modified Column Index Name —
OCI_ATTR_SODA_MODTIME_INDEX
-
Creation Time Stamp Column Name —
OCI_ATTR_SODA_CRTIME_COL_NAME
-
Media Type Column Name —
OCI_ATTR_SODA_MTYPE_COL_NAME
-
Read Only —
OCI_ATTR_SODA_READONLY
OCI_ATTR_SODA_COLL_NAME
OCI_ATTR_SODA_DESCRIPTOR
OCI_ATTR_SODA_SCHEMA
OCI_ATTR_SODA_TABLE_NAME
OCI_ATTR_SODA_VIEW_NAME
OCI_ATTR_SODA_KEY_COL_NAME
OCI_ATTR_SODA_KEY_SQL_TYPE
OCI_ATTR_SODA_KEY_MAX_LEN
- Mode
-
READ
- Description
-
Specifies the maximum length of the key column in bytes. This component applies only to keys of type
VARCHAR2
. At least 32 bytes if key assignment method isUUID
orGUID
. See OCI_ATTR_SODA_KEY_ASSIGN_METHOD.See Also:
- Attribute Data Type
-
ub4
OCI_ATTR_SODA_KEY_ASSIGN_METHOD
- Mode
-
READ
- Description
-
Specifies the OCI value for the corresponding value for this component method used to assign keys to objects that are inserted into the collection.
UUID
,GUID
,SEQUENCE
, andCLIENT
are the corresponding valid values for this component, as it would appear in the JSON metadata. The valid values for this attribute include:-
OCI_SODA_KEY_METHOD_UUID
forUUID
, which is the corresponding value for this component, as it would appear in the JSON metadata. -
OCI_SODA_KEY_METHOD_GUID
forGUID
, which is the corresponding value for this component, as it would appear in the JSON metadata. -
OCI_SODA_KEY_METHOD_SEQUENCE
forSEQUENCE
, which is the corresponding value for this component, as it would appear in the JSON metadata. -
OCI_SODA_KEY_METHOD_CLIENT
forCLIENT
, which is the corresponding value for this component, as it would appear in the JSON metadata.
-
- Attribute Data Type
-
ub1
OCI_ATTR_SODA_KEY_SEQ_NAME
- Mode
-
READ
- Description
-
Specifies the name of the database sequence that generates keys for documents that are inserted into a collection if the key assignment method is SEQUENCE.
Note:
If you drop a collection using SODA for OCI, the sequence used for key generation is not dropped. This is because it might not have been created using SODA for OCI. To drop the sequence, use SQL command
DROP SEQUENCE
, after first dropping the collection.See Also:
-
Oracle Database SQL Language Reference for information about
DROP SEQUENCE
- Attribute Data Type
-
oratext *
OCI_ATTR_SODA_CTNT_COL_NAME
OCI_ATTR_SODA_CTNT_SQL_TYPE
OCI_ATTR_SODA_CTNT_MAX_LEN
- Mode
-
READ
- Description
-
Specifies the maximum length of the content column in bytes. This component applies only to content of type
VARCHAR2
. The default value is 4000 bytes.See Also:
-
Oracle Database SQL Language Reference for information about extended data types
- Attribute Data Type
-
ub4
OCI_ATTR_SODA_CTNT_VALIDATION
- Mode
-
READ
- Description
-
Specifies the OCI value for the corresponding syntax to which JSON content must conform. The valid values for this attribute include:
-
OCI_SODA_JSON_VALIDATION_STRICT
forSTRICT
, which is the corresponding value as it appears in the JSON collection metadata.See Oracle Database Introduction to Simple Oracle Document Access (SODA) for more information about the
STRICT
syntax. -
OCI_COLL_JSON_VALIDATION_LAX
forLAX
, which is the corresponding value as it appears in the JSON collection metadata.See Oracle Database Introduction to Simple Oracle Document Access (SODA) for more information about the
LAX
syntax. -
OCI_SODA_JSON_VALIDATION_STD
forSTANDARD
, which is the corresponding value as it appears in the JSON collection metadata.See Oracle Database Introduction to Simple Oracle Document Access (SODA) for more information about the
STANDARD
syntax.
-
- Attribute Data Type
-
ub4
OCI_ATTR_SODA_CTNT_COMPRESS
- Mode
-
READ
- Description
-
Specifies the OCI value for the corresponding value for the SecureFiles LOB compression setting as it appears in the JSON collection metadata. The valid values for this attribute include:
-
OCI_SODA_LOB_COMPRESS_NONE
forNONE
, which is the corresponding value as it appears in the JSON collection metadata. -
OCI_SODA_LOB_COMPRESS_HIGH
forHIGH
, which is the corresponding value as it appears in the JSON collection metadata. -
OCI_SODA_LOB_COMPRESS_MEDIUM
forMEDIUM
, which is the corresponding value as it appears in the JSON collection metadata. -
OCI_SODA_LOB_COMPRESS_LOW
forLOW
, which is the corresponding value as it appears in the JSON collection metadata.
See Also:
Oracle Database SecureFiles and Large Objects Developer's Guide for information about SecureFiles LOB storage
-
- Attribute Data Type
-
ub1
OCI_ATTR_SODA_CTNT_CACHE
- Mode
-
READ
- Description
-
Specifies the SecureFiles LOB cache setting.
See Also:
Oracle Database SecureFiles and Large Objects Developer's Guide for information about SecureFiles LOB storage
- Attribute Data Type
-
boolean
OCI_ATTR_SODA_CTNT_ENCRYPT
Note:
The deprecated
algorithms for DBMS_CRYPTO
and native network encryption include
MD4, MD5, DES, 3DES, and RC4-related algorithms as well as 3DES for Transparent Data
Encryption (TDE). Removing older, less secure cryptography algorithms prevents
accidental use of these algorithms. To meet your security requirements, Oracle
recommends that you use more modern cryptography algorithms, such as the Advanced
Encryption Standard (AES).
As a consequence of this deprecation, Oracle recommends that you review your network encryption configuration to see if you have specified use of any of the deprecated algorithms. If any are found, then switch to using a more modern cipher, such as AES. Also, if you are currently using 3DES encryption for your TDE deployment, then you should plan to migrate to a more modern algorithm such as AES. For more information, refer to Oracle Database Security Guide
- Mode
-
READ
- Description
-
Specifies the OCI value for the corresponding value for the SecureFiles LOB encryption setting as it appears in the JSON collection metadata. The valid values for this attribute include:
-
OCI_SODA_LOB_ENCRYPT_NONE
forNONE
, which is the corresponding value as it appears in the JSON collection metadata. -
OCI_SODA_LOB_ENCRYPT_3DES168
for3DES168
, which is the corresponding value as it appears in the JSON collection metadata. -
OCI_SODA_LOB_ENCRYPT_AES128
forAES128
, which is the corresponding value as it appears in the JSON collection metadata. -
OCI_SODA_LOB_ENCRYPT_AES192
forAES192
, which is the corresponding value as it appears in the JSON collection metadata. -
OCI_SODA_LOB_ENCRYPT_AES256
forAES256
, which is the corresponding value as it appears in the JSON collection metadata.
See Also:
Oracle Database SecureFiles and Large Objects Developer's Guide for information about SecureFiles LOB storage
-
- Attribute Data Type
-
ub1
OCI_ATTR_SODA_VERSION_COL_NAME
OCI_ATTR_SODA_VERSION_METHOD
- Mode
-
READ
- Description
-
Specifies the OCI value for the corresponding method used to compute version values for objects when they are inserted into a collection or replaced as it appears in the JSON collection metadata. The valid values for this attribute include:
-
OCI_SODA_VERSION_UUID
forUUID
, which is the corresponding value as it appears in the JSON collection metadata -
OCI_SODA_VERSION_TIMESTAMP
forTIMESTAMP
, which is the corresponding value as it appears in the JSON collection metadata -
OCI_SODA_VERSION_MD5
forMD5
, which is the corresponding value as it appears in the JSON collection metadata -
OCI_SODA_VERSION_SHA256
forSHA256
, which is the corresponding value as it appears in the JSON collection metadata -
OCI_SODA_VERSION_SEQUENTIAL
forSEQUENTIAL
, which is the corresponding value as it appears in the JSON collection metadata -
OCI_SODA_VERSION_NONE
forNONE
, which is the corresponding value as it appears in the JSON collection metadata
-
- Attribute Data Type
-
ub1
OCI_ATTR_SODA_MODTIME_COL_NAME
OCI_ATTR_SODA_MODTIME_INDEX
OCI_ATTR_SODA_CRTIME_COL_NAME
OCI_ATTR_SODA_MTYPE_COL_NAME
OCI_ATTR_SODA_READONLY
A.17 SODA Output Options Handle Attributes
Lists and describes the OCI SODA Output Options handle attributes. This handle is used to return the number of documents processed by a bulk operation. Currently, it is returned only by bulk insert methods.
A.18 SODA Operation Options Handle Attributes
Lists and describes the OCI SODA Operation Options handle attributes.
The attributes listed in this section can be set on the
OCISodaOperationOptions
handle using the standard OCIAttrSet
methods. However, if you want to set an array of keys on the
OCISodaOperationOptions
handle, then you must use
OCISodaOperKeysSet()
method.
OCI_ATTR_SODA_KEY
- Mode
-
READ/WRITE
- Description
-
Key to be used for the operation.
Note:
If you use functionOCIAttrSet()
to set attributeOCI_ATTR_SODA_KEY
on an operation-options handle, and you also use functionOCISodaOperKeysSet()
to set multiple keys on the same handle, then only the latest of the two settings takes effect. The effect of the first function invoked is overridden by the effect of the second. - Attribute Data Type
-
oratext **/oratext *
OCI_ATTR_SODA_VERSION
OCI_ATTR_SODA_FILTER
OCI_ATTR_SODA_SKIP
OCI_ATTR_SODA_LIMIT
OCI_ATTR_SODA_AS_OF_SCN
OCI_ATTR_SODA_AS_OF_TSTAMP
OCI_ATTR_SODA_LOCK
OCI_ATTR_SODA_HINT
- Description
- Oracle Database release 19.11 introduces
OCI_ATTR_SODA_HINT
attribute. If this value is set, then the value of that attribute is pasted into the hint section of the underlying SQL statements.Oracle Database release 19.11 introduces
OCISodaInsertAndGetWithOpts
,OCISodaBulkInsertAndGetWithOpts
, andOCISodaSaveAndGetWithOpts
new variants of the existing functions in order for the inserts and saves to accept hints, These variants take theOCISodaOperationOptions
handle, and thus allow the passing of hints (they ignore all the other attributes that can be set on this handle). - Attribute Data Type
- oratext **/oratext *
A.19 LOB Descriptor and LOB Locator Attributes
Lists and describes LOB locator attributes.
The following attributes are used for the parameter descriptor.
OCI_ATTR_LOBEMPTY
- Mode
-
WRITE
- Description
-
Sets the internal LOB locator to empty. The locator can then be used as a bind variable for an
INSERT
orUPDATE
statement to initialize the LOB to empty. Once the LOB is empty, OCILobWrite2() or OCILobWrite() (deprecated) can be called to populate the LOB with data. This attribute is only valid for internal LOBs (that is,BLOB
,CLOB
,NCLOB
).Applications should pass the address of a
ub4
that has a value of 0; for example, declare the following:ub4 lobEmpty = 0
Then they should pass the address:
&lobEmpty
. - Attribute Data Type
-
ub4 *
OCI_ATTR_LOB_REMOTE
- Mode
-
READ
- Description
-
Determines whether the LOB locator belongs to a local database table or a remote database table. The value
TRUE
indicates that the LOB locator is from a remote database table. The application must fetch the LOB descriptor from the database before using this attribute.Only the server can set this value. If an application tries to set this attribute, then an
ORA-24315
error is raised. - Attribute Data Type
boolean
OCI_ATTR_LOB_TYPE
A.20 Complex Object Attributes
Lists and describes complex object attributes.
The following attributes are used for complex objects.
See Also:
A.20.1 Complex Object Retrieval Handle Attributes
Lists and describes complex object retrieval handle attributes.
The following attributes are used for the complex object retrieval handle.
OCI_ATTR_COMPLEXOBJECT_LEVEL
OCI_ATTR_COMPLEXOBJECT_COLL_OUTOFLINE
A.21 Database Advanced Queuing Descriptor Attributes
Lists and describes Database Advanced Queuing descriptor attributes
The following attributes are used for the database advanced queuing descriptor.
A.21.1 OCIAQEnqOptions Descriptor Attributes
Lists and describes OCIAQEnqOptions descriptor attributes.
The following attributes are properties of the OCIAQEnqOptions
descriptor.
OCI_ATTR_MSG_DELIVERY_MODE
- Mode
-
WRITE
- Description
-
The enqueue call can enqueue a persistent or buffered message into a queue, by setting the
OCI_ATTR_MSG_DELIVERY_MODE
attribute in theOCIAQEnqOptions
descriptor toOCI_MSG_PERSISTENT
orOCI_MSG_BUFFERED
, respectively. The default value for this attribute isOCI_MSG_PERSISTENT
. - Attribute Data Type
-
ub2
OCI_ATTR_RELATIVE_MSGID
- Mode
-
READ/WRITE
- Description
-
This feature is deprecated and may be removed in a future release.
Specifies the message identifier of the message that is referenced in the sequence deviation operation. This value is valid if and only if
OCI_ENQ_BEFORE
is specified inOCI_ATTR_SEQUENCE_DIVISION
. This value is ignored if the sequence deviation is not specified. - Attribute Data Type
-
OCIRaw *
OCI_ATTR_SEQUENCE_DEVIATION
- Mode
-
READ/WRITE
- Description
-
This feature is deprecated for new applications, but it is retained for compatibility.
It specifies whether the message being enqueued should be dequeued before other messages in the queue.
- Attribute Data Type
-
ub4
- Valid Values
-
The only valid values are:
-
OCI_ENQ_BEFORE
- The message is enqueued ahead of the message specified byOCI_ATTR_RELATIVE_MSGID
. -
OCI_ENQ_TOP
- The message is enqueued ahead of any other messages.
-
OCI_ATTR_TRANSFORMATION
OCI_ATTR_VISIBILITY
- Mode
-
READ/WRITE
- Description
-
Specifies the transactional behavior of the enqueue request.
- Attribute Data Type
-
ub4
- Valid Values
-
The only valid values are:
-
OCI_ENQ_ON_COMMIT
- The enqueue is part of the current transaction. The operation is complete when the transaction commits. This is the default case. -
OCI_ENQ_IMMEDIATE
- The enqueue is not part of the current transaction. The operation constitutes a transaction of its own.
-
A.21.2 OCIAQDeqOptions Descriptor Attributes
Lists and describes OCIAQDeqOptions descriptor attributes.
The following attributes are properties of the OCIAQDeqOptions
descriptor.
OCI_ATTR_CONSUMER_NAME
OCI_ATTR_CORRELATION
- Mode
-
READ/WRITE
- Description
-
Specifies the correlation identifier of the message to be dequeued. Special pattern-matching characters, such as the percent sign (%) and the underscore (_), can be used. If multiple messages satisfy the pattern, the order of dequeuing is undetermined.
- Attribute Data Type
-
oratext *
OCI_ATTR_DEQ_MODE
- Mode
-
READ/WRITE
- Description
-
Specifies the locking behavior associated with the dequeue.
- Attribute Data Type
-
ub4
- Valid Values
-
The only valid values are:
-
OCI_DEQ_BROWSE
- Read the message without acquiring any lock on the message. This is equivalent to aSELECT
statement. -
OCI_DEQ_LOCKED
- Read and obtain a write lock on the message. The lock lasts for the duration of the transaction. This is equivalent to aSELECT
FOR
UPDATE
statement. -
OCI_DEQ_REMOVE
- Read the message and update or delete it. This is the default. The message can be retained in the queue table based on the retention properties. -
OCI_DEQ_REMOVE_NODATA
- Confirm receipt of the message, but do not deliver the actual message content.
-
OCI_ATTR_DEQ_MSGID
OCI_ATTR_DEQCOND
- Mode
-
READ/WRITE
- Description
-
This attribute is a Boolean expression similar to the
WHERE
clause of a SQL query. This Boolean expression can include conditions on message properties, user data properties (object payloads only), and PL/SQL or SQL functions.To specify dequeue conditions on a message payload (object payload), use attributes of the object type in clauses. You must prefix each attribute with
tab.user_data
as a qualifier to indicate the specific column of the queue table that stores the payload.The attribute cannot exceed 4000 characters. If multiple messages satisfy the dequeue condition, then the order of dequeuing is indeterminate, and the sort order of the queue is not honored.
- Attribute Data Type
-
oratext *
- Example
checkerr(errhp, OCIAttrSet(deqopt, OCI_DTYPE_AQDEQ_OPTIONS, (dvoid *)"tab.priority between 2 and 4" , strlen("tab.priority between 2 and 4"), OCI_ATTR_DEQCOND, errhp));
OCI_ATTR_MSG_DELIVERY_MODE
- Mode
-
WRITE
- Description
-
You can specify the dequeue call to dequeue persistent, buffered, or both kinds of messages from a queue, by setting the
OCI_ATTR_MSG_DELIVERY_MODE
attribute in theOCIAQDeqOptions
descriptor toOCI_MSG_PERSISTENT
,OCI_MSG_BUFFERED
, orOCI_MSG_PERSISTENT_OR_BUFFERED
, respectively. The default value for this attribute isOCI_MSG_PERSISTENT
. - Attribute Data Type
-
ub2
OCI_ATTR_NAVIGATION
- Mode
-
READ/WRITE
- Description
-
Specifies the position of the message that is retrieved. First, the position is determined. Second, the search criterion is applied. Finally, the message is retrieved.
- Attribute Data Type
-
ub4
- Valid Values
-
The only valid values are:
-
OCI_DEQ_FIRST_MSG
- Retrieves the first available message that matches the search criteria. This resets the position to the beginning of the queue. -
OCI_DEQ_NEXT_MSG
- Retrieves the next available message that matches the search criteria. If the previous message belongs to a message group, AQ retrieves the next available message that matches the search criteria and belongs to the message group. This is the default. -
OCI_DEQ_NEXT_TRANSACTION
- Skips the remainder of the current transaction group (if any) and retrieves the first message of the next transaction group. This option can only be used if message grouping is enabled for the current queue. -
OCI_DEQ_FIRST_MSG_MULTI_GROUP
- Indicates that a call toOCIAQDeqArray()
resets the position to the beginning of the queue and dequeue messages (possibly across different transaction groups) that are available and match the search criteria, until reaching theiters
limit. To distinguish between transaction groups, a new message property,OCI_ATTR_TRANSACTION_NO
, is defined. All messages belonging to the same transaction group have the same value for this message property. -
OCI_DEQ_NEXT_MSG_MULTI_GROUP
- Indicates that a call toOCIAQDeqArray()
dequeues the next set of messages (possibly across different transaction groups) that are available and match the search criteria, until reaching theiters
limit. To distinguish between transaction groups, a new message property,OCI_ATTR_TRANSACTION_NO
, is defined. All messages belonging to the same transaction group have the same value for this message property.
-
OCI_ATTR_TRANSFORMATION
OCI_ATTR_VISIBILITY
- Mode
-
READ/WRITE
- Description
-
Specifies whether the new message is dequeued as part of the current transaction. The visibility parameter is ignored when using the
BROWSE
mode. - Attribute Data Type
-
ub4
- Valid Values
-
The only valid values are:
-
OCI_DEQ_ON_COMMIT
- The dequeue is part of the current transaction. This is the default. -
OCI_DEQ_IMMEDIATE
- The dequeued message is not part of the current transaction. It constitutes a transaction on its own.
-
OCI_ATTR_WAIT
- Mode
-
READ/WRITE
- Description
-
Specifies the wait time if no message is currently available that matches the search criteria. This parameter is ignored if messages in the same group are being dequeued.
- Attribute Data Type
-
ub4
- Valid Values
-
Any
ub4
value is valid, but the following predefined constants are provided:-
OCI_DEQ_WAIT_FOREVER
- Wait forever. This is the default. -
OCI_DEQ_NO_WAIT
- Do not wait.
Note:
If the
OCI_DEQ_NO_WAIT
option is used to poll a queue, then messages are not dequeued after polling an empty queue. Use theOCI_DEQ_FIRST_MSG
option instead of the defaultOCI_DEQ_NEXT_MSG
setting ofOCI_ATTR_NAVIGATION
. You can also use a nonzero wait setting (1 is suggested) ofOCI_ATTR_WAIT
for the dequeue. -
A.21.3 OCIAQMsgProperties Descriptor Attributes
Lists and describes OCIAQMsgProperties descriptor attributes.
The following attributes are properties of the OCIAQMsgProperties
descriptor.
OCI_ATTR_ATTEMPTS
OCI_ATTR_CORRELATION
OCI_ATTR_DELAY
- Mode
-
READ/WRITE
- Description
-
Specifies the number of seconds to delay the enqueued message. The delay represents the number of seconds after which a message is available for dequeuing. Dequeuing by message ID (msgid) overrides the delay specification. A message enqueued with delay set is in the
WAITING
state; when the delay expires the messages goes to theREADY
state.DELAY
processing requires the queue monitor to be started. Note that the delay is set by the producer who enqueues the message. - Attribute Data Type
-
sb4
- Valid Values
-
Any sb4 value is valid, but the following predefined constant is available:
- OCI_MSG_NO_DELAY - Indicates that the message is available for immediate dequeuing.
OCI_ATTR_ENQ_TIME
OCI_ATTR_EXCEPTION_QUEUE
- Mode
-
READ/WRITE
- Description
-
Specifies the name of the queue to which the message is moved if it cannot be processed successfully. Messages are moved in two cases: If the number of unsuccessful dequeue attempts has exceeded
max_retries
; or if the message has expired. All messages in the exception queue are in theEXPIRED
state.The default is the exception queue associated with the queue table. If the exception queue specified does not exist at the time of the move, the message is moved to the default exception queue associated with the queue table, and a warning is logged in the alert file. If the default exception queue is used, the parameter returns a
NULL
value at dequeue time.This attribute must refer to a valid queue name.
- Attribute Data Type
-
oratext *
OCI_ATTR_EXPIRATION
- Mode
-
READ/WRITE
- Description
-
Specifies the expiration of the message. It determines, in seconds, how long the message is available for dequeuing. This parameter is an offset from the delay. Expiration processing requires the queue monitor to be running.
While waiting for expiration, the message remains in the
READY
state. If the message is not dequeued before it expires, it is moved to the exception queue in theEXPIRED
state. - Attribute Data Type
-
sb4
- Valid Values
-
Any sb4 value is valid, but the following predefined constant is available:
- OCI_MSG_NO_EXPIRATION - The message never expires.
OCI_ATTR_MSG_DELIVERY_MODE
- Mode
-
READ
- Description
-
After a dequeue call, the OCI client can read the
OCI_ATTR_MSG_DELIVERY_MODE
attribute in theOCIAQMsgProperties
descriptor to determine whether a persistent or buffered message was dequeued. The value of the attribute isOCI_MSG_PERSISTENT
for persistent messages andOCI_MSG_BUFFERED
for buffered messages. - Attribute Data Type
-
ub2
OCI_ATTR_MSG_STATE
- Mode
-
READ
- Description
-
Specifies the state of the message at the time of the dequeue. This parameter cannot be set at enqueue time.
- Attribute Data Type
-
ub4
- Valid Values
-
Only the following values are returned:
-
OCI_MSG_WAITING
- The message delay has not yet been reached. -
OCI_MSG_READY
- The message is ready to be processed. -
OCI_MSG_PROCESSED
- The message has been processed and is retained. -
OCI_MSG_EXPIRED
- The message has been moved to the exception queue.
-
OCI_ATTR_ORIGINAL_MSGID
- Mode
-
READ/WRITE
- Description
-
The ID of the message in the last queue that generated this message. When a message is propagated from one queue to another, this attribute identifies the ID of the queue from which it was last propagated. When a message has been propagated through multiple queues, this attribute identifies the ID of the message in the last queue that generated this message, not the first queue.
- Attribute Data Type
-
OCIRaw *
OCI_ATTR_PRIORITY
OCI_ATTR_RECIPIENT_LIST
OCI_ATTR_SENDER_ID
OCI_ATTR_TRANSACTION_NO
- Mode
-
READ
- Description
-
For transaction-grouped queues, this identifies the transaction group of the message. This attribute is populated after a successful
OCIAQDeqArray()
call. All messages in a group have the same value for this attribute. This attribute cannot be used by theOCIAQEnqArray()
call to set the transaction group for an enqueued message. - Attribute Data Type
-
oratext *
A.21.4 OCIAQAgent Descriptor Attributes
Lists and describes OCIAQAgent descriptor attributes.
The following attributes are properties of the OCIAQAgent
descriptor.
OCI_ATTR_AGENT_ADDRESS
OCI_ATTR_AGENT_NAME
OCI_ATTR_AGENT_PROTOCOL
A.22 Subscription Handle Attributes
Lists and describes subscription handle attributes.
The following attributes are used for the subscription handle.
OCI_ATTR_SERVER_DNS
OCI_ATTR_SUBSCR_CALLBACK
- Mode
-
READ/WRITE
- Description
-
Subscription callback. If the attribute
OCI_ATTR_SUBSCR_RECPTPROTO
is set toOCI_SUBSCR_PROTO_OCI
or is left not set, then this attribute must be set before the subscription handle can be passed into the registration callOCISubscriptionRegister()
. - Attribute Data Type
-
ub4 (void *, OCISubscription *, void *, ub4, void *, ub4)
OCI_ATTR_SUBSCR_CQ_QOSFLAGS
- Mode
-
WRITE
- Description
-
Sets QOS (quality of service flags) specific to continuous query (CQ) notifications. For the possible values you can pass, see the section on using OCI subscription handle attributes for CQN in Oracle Database Development Guide.
- Attribute Data Type
-
ub4 *
OCI_ATTR_SUBSCR_CTX
- Mode
-
READ/WRITE
- Description
-
Context that the client wants to get passed to the user callback denoted by
OCI_ATTR_SUBSCR_CALLBACK
when it gets invoked by the system. If the attributeOCI_ATTR_SUBSCR_RECPTPROTO
is set toOCI_SUBSCR_PROTO_OCI
or is left not set, then this attribute must be set before the subscription handle can be passed into the registration callOCI Subscription Register()
. - Attribute Data Type
-
void *
OCI_ATTR_SUBSCR_HOSTADDR
- Mode
-
READ/WRITE
- Description
-
Before registering for notification using
OCISubscriptionRegister()
, specify the client IP (in either IPv4 or IPv6 format) of the listening endpoint of the OCI notification client to which the notification is sent. Enter either IPv4 addresses in dotted decimal format, for example, 192.0.2.34, or IPv6 addresses in hexadecimal format, for example, 2001:0db8:0000:0000:0217:f2ff:fe4b:4ced.See Also:
Oracle Database Net Services Administrator's Guide for more information about the IPv6 format for IP addresses
- Attribute Data Type
-
text *
- Example
/* Set notification client address*/ text ipaddr[16] = "192.0.2.34"; (void) OCIAttrSet((dvoid *) envhp, (ub4) OCI_HTYPE_ENV, (dvoid *) ipaddr, (ub4) strlen(ipaddr), (ub4) OCI_ATTR_SUBSCR_HOSTADDR, errhp);
OCI_ATTR_SUBSCR_IPADDR
- Mode
-
READ/WRITE
- Description
-
The client IP address (IPv4 or IPv6) on which an OCI client registered for notification listens, to receive notifications. For example, IPv4 address in dotted decimal format such as 192.1.2.34 or IPv6 address in hexadecimal format such as 2001:0db8:0000:0000:0217:f2ff:fe4b:4ced.
See Also:
Oracle Database Net Services Administrator's Guide for more information about the IPv6 format for IP addresses
- Attribute Data Type
-
oratext *
OCI_ATTR_SUBSCR_NAME
- Mode
-
READ/WRITE
- Description
-
Subscription name. All subscriptions are identified by a subscription name. A subscription name consists of a sequence of bytes of specified length. The length in bytes of the name must be specified as it is not assumed that the name is
NULL
-terminated. This is important because the name could contain multibyte characters.Clients can set the subscription name attribute of a subscription handle using an
OCIAttrSet()
call and by specifying a handle type ofOCI_HTYPE_SUBSCR
and an attribute type ofOCI_ATTR_SUBSCR_NAME
.All of the subscription callbacks need a subscription handle with the
OCI_ATTR_SUBSCR_NAME
andOCI_ATTR_SUBSCR_NAMESPACE
attributes set. If the attributes are not set, an error is returned. The subscription name that is set for the subscription handle must be consistent with its namespace. - Attribute Data Type
-
oratext *
OCI_ATTR_SUBSCR_NAMESPACE
- Mode
-
READ/WRITE
- Description
-
Namespace in which the subscription handle is used. The valid values for this attribute are
OCI_SUBSCR_NAMESPACE_AQ
,OCI_SUBSCR_NAMESPACE_DBCHANGE
, andOCI_SUBSCR_NAMESPACE_ANONYMOUS
.The subscription name that is set for the subscription handle must be consistent with its namespace.
- Attribute Data Type
-
ub4 *
OCI_ATTR_SUBSCR_NTFN_GROUPING_CLASS
- Mode
-
READ/WRITE
- Description
-
Notification grouping class. If set to 0 (the default) all other notification grouping attributes must be 0. It is implemented for time in the latest release and is the only current criterion for grouping. Can be set to
OCI_SUBSCR_NTFN_GROUPING_CLASS_TIME
.Note:
OCI_OBJECT
mode is required when using grouping notifications. - Attribute Data Type
-
ub1 *
OCI_ATTR_SUBSCR_NTFN_GROUPING_REPEAT_COUNT
OCI_ATTR_SUBSCR_NTFN_GROUPING_START_TIME
OCI_ATTR_SUBSCR_NTFN_GROUPING_TYPE
- Mode
-
READ/WRITE
- Description
-
The format of the grouping notification: whether a summary of all events in the group or just the last event in the group. Use
OCIAttrSet()
to set to one of the following notification grouping types:OCI_SUBSCR_NTFN_TYPE_SUMMARY
orOCI_SUBSCR_NTFN_TYPE_LAST
. Summary of notifications is the default. The other choice is the last notification. - Attribute Data Type
-
ub1 *
OCI_ATTR_SUBSCR_NTFN_GROUPING_VALUE
- Mode
-
READ/WRITE
- Description
-
Specifies the value for the grouping class. For time, this is the time-period of grouping notifications specified in seconds, that is, the time after which grouping notification is sent periodically until
OCI_ATTR_SUBSCR_NTFN_GROUPING_REPEAT_COUNT
is exhausted. - Attribute Data Type
-
ub4 *
OCI_ATTR_SUBSCR_PAYLOAD
- Mode
-
READ/WRITE
- Description
-
Buffer that corresponds to the payload that must be sent along with the notification. The length of the buffer can also be specified in the same set attribute call. This attribute must be set before a post can be performed on a subscription. For the current release, only an untyped (
ub1 *
) payload is supported. - Attribute Data Type
-
ub1 *
OCI_ATTR_SUBSCR_QOSFLAGS
- Mode
-
READ/WRITE
- Description
-
Quality of service levels of the server. The possible settings are:
-
OCI_SUBSCR_QOS_RELIABLE
- Reliable. If the database fails, it does not lose notification. Not supported for nonpersistent queues or buffered messaging. -
OCI_SUBSCR_QOS_PURGE_ON_NTFN
- Once received, purge notification and remove subscription. -
OCI_SUBSCR_QOS_PAYLOAD
- Payload notification.
-
- Attribute Data Type
-
ub4 *
OCI_ATTR_SUBSCR_RECPT
- Mode
-
READ/WRITE
- Description
-
The name of the recipient of the notification when the attribute
OCI_ATTR_SUBSCR_RECPTPROTO
is set toOCI_SUBSCR_PROTO_MAIL
,OCI_SUBSCR_PROTO_HTTP
, orOCI_SUBSCR_PROTO_SERVER
.For
OCI_SUBSCR_PROTO_HTTP
,OCI_ATTR_SUBSCR_RECPT
denotes the HTTP URL (for example, http://www.oracle.com:80) to which notification is sent. The validity of the HTTP URL is never checked by the database.For
OCI_SUBSCR_PROTO_MAIL
,OCI_ATTR_SUBSCR_RECPT
denotes the email address (for example, xyz@oracle.com) to which the notification is sent. The validity of the email address is never checked by the database system.For
OCI_SUBSCR_PROTO_SERVER
,OCI_ATTR_SUBSCR_RECPT
denotes the database procedure (for example:schema.procedure
) that is invoked when there is a notification. The subscriber must have appropriate permissions on the procedure for it to be executed.See Also:
Notification Procedure for information about procedure definition
- Attribute Data Type
-
oratext *
OCI_ATTR_SUBSCR_RECPTPRES
- Mode
-
READ/WRITE
- Description
-
The presentation with which the client wants to receive the notification. The valid values for this are
OCI_SUBSCR_PRES_DEFAULT
andOCI_SUBSCR_PRES_XML
.If not set, this attribute defaults to
OCI_SUBSCR_PRES_DEFAULT
.For event notification in XML presentation, set this attribute to
OCI_SUBSCR_PRES_XML
. XML presentation is limited to 2000 bytes. Otherwise, leave it unset or set it toOCI_SUBSCR_PRES_DEFAULT
. - Attribute Data Type
-
ub4
OCI_ATTR_SUBSCR_RECPTPROTO
- Mode
-
READ/WRITE
- Description
-
The protocol with which the client wants to receive the notification. The valid values for this are:
-
OCI_SUBSCR_PROTO_OCI
-
OCI_SUBSCR_PROTO_MAIL
-
OCI_SUBSCR_PROTO_SERVER
-
OCI_SUBSCR_PROTO_HTTP
If an OCI client wants to receive the event notification, then you should set this attribute to
OCI_SUBSCR_PROTO_OCI
.If you want an email to be sent on event notification, then set this attribute to
OCI_SUBSCR_PROTO_MAIL
. If you want a PL/SQL procedure to be invoked in the database on event notification, then set this attribute toOCI_SUBSCR_PROTO_SERVER
. If you want an HTTP URL to be posted to on event notification, then set this attribute toOCI_SUBSCR_PROTO_HTTP
.If not set, this attribute defaults to
OCI_SUBSCR_PROTO_OCI
.For
OCI_SUBSCR_PROTO_OCI
, the attributesOCI_ATTR_SUBSCR_CALLBACK
andOCI_ATTR_SUBSCR_CTX
must be set before the subscription handle can be passed into the registration callOCISubscriptionRegister()
.For
OCI_SUBSCR_PROTO_MAIL
,OCI_SUBSCR_PROTO_SERVER
, andOCI_SUBSCR_PROTO_HTTP
, the attributeOCI_ATTR_SUBSCR_RECPT
must be set before the subscription handle can be passed into the registration callOCISubscriptionRegister()
. -
- Attribute Data Type
-
ub4 *
OCI_ATTR_SUBSCR_TIMEOUT
A.22.1 Continuous Query Notification Attributes
Lists and describes continuous query notification attributes.
The following attributes are used for continuous query notification.
OCI_ATTR_CHNF_CHANGELAG
OCI_ATTR_CHNF_OPERATIONS
- Mode
-
WRITE
- Description
-
Used to filter notifications based on operation type.
See Also:
About Continuous Query Notification for details about the flag values
- Attribute Data Type
-
ub4 *
OCI_ATTR_CHNF_ROWIDS
OCI_ATTR_CHNF_TABLENAMES
A.22.2 Continuous Query Notification Descriptor Attributes
Lists and describes continuous query notification descriptor attributes.
The following attributes are used for the continuous query notification descriptor.
OCI_ATTR_CHDES_DBNAME
OCI_ATTR_CHDES_NFTYPE
- Mode
-
READ
- Description
-
Flags describing the notification type.
See Also:
About Continuous Query Notification for the flag values
- Attribute Data Type
-
ub4 *
OCI_ATTR_CHDES_ROW_OPFLAGS
OCI_ATTR_CHDES_ROW_ROWID
OCI_ATTR_CHDES_TABLE_CHANGES
- Mode
-
READ
- Description
-
A collection type describing operations on tables. Each element of the collection is a table continuous query descriptors (
OCITableChangeDesc *
) of typeOCI_DTYPE_TABLE_CHDES
that has the attributes that begin withOCI_ATTR_CHDES_TABLE
. See the following entries. - Attribute Data Type
-
OCIColl **
OCI_ATTR_CHDES_TABLE_NAME
OCI_ATTR_CHDES_TABLE_OPFLAGS
- Mode
-
READ
- Description
-
Flags describing the operations on the table.
- Attribute Data Type
-
ub4 *
See Also:
Oracle Database Development Guide for information about the flag values for the
OCI_DTYPETABLE_CHDES
continuous query notification descriptor
OCI_ATTR_CHDES_TABLE_ROW_CHANGES
- Mode
-
READ
- Description
-
An embedded collection describing the changes to the rows of the table. Each element of the collection is a row continuous query descriptor (
OCIRowChangeDesc *
) of typeOCI_DTYPE_ROW_CHDES
that has the attributesOCI_ATTR_CHDES_ROW_OPFLAGS
andOCI_ATTR_CHDES_ROW_ROWID
. - Attribute Data Type
-
OCIColl **
OCI_ATTR_CHDES_XID
- Mode
-
READ
- Description
-
The transaction ID of the message.
- Attribute Data Type
-
OCIRaw *
See Also:
Oracle Database Development Guide for more information.
A.22.3 Notification Descriptor Attributes
Lists and describes notification descriptor attributes.
The following are attributes of the descriptor OCI_DTYPE_AQNFY
.
OCI_ATTR_AQ_NTFN_GROUPING_COUNT
OCI_ATTR_AQ_NTFN_GROUPING_ MSGID_ARRAY
OCI_ATTR_CONSUMER_NAME
OCI_ATTR_MSG_PROP
OCI_ATTR_NFY_FLAGS
OCI_ATTR_NFY_MSGID
OCI_ATTR_QUEUE_NAME
A.22.4 Invalidated Query Attributes
Lists and describes invalidated query attributes.
This section describes OCI_DTYPE_CQDES
attributes.
See Also:
Oracle Database Development Guide for more information about the OCI_DTYPE_CQDES
continuous query notification descriptor
OCI_ATTR_CQDES_OPERATION
OCI_ATTR_CQDES_QUERYID
OCI_ATTR_CQDES_TABLE_CHANGES
A.23 Direct Path Loading Handle Attributes
Lists and describes direct path loading handle attributes.
The following attributes are used for the direct path loading handle.
See Also:
Direct Path Loading Overview and Direct Path Loading of Object Types for information about direct path loading and allocating the direct path handles
A.23.1 Direct Path Context Handle (OCIDirPathCtx) Attributes
Lists and describes direct path context handle (OCIDirPathCtx) attributes.
The following attributes are used for the direct path context handle.
OCI_ATTR_BUF_SIZE
OCI_ATTR_CHARSET_ID
- Mode
-
READ/WRITE
- Description
-
Default character set ID for the character data. Note that the character set ID can be overridden at the column level. If the character set ID is not specified at the column level or the table level, then the Global support environment setting is used.
- Attribute Data Type
-
ub2 */ub2 *
OCI_ATTR_DATEFORMAT
- Mode
-
READ/WRITE
- Description
-
Default date format string for
SQLT_CHR
toDTYDAT
conversions. Note that the date format string can be overridden at the column level. If date format string is not specified at the column level or the table level, then the Global Support environment setting is used. - Attribute Data Type
-
oratext **/oratext *
OCI_ATTR_DIRPATH_DCACHE_DISABLE
- Mode
-
READ/WRITE
- Description
-
Setting this attribute to 1 indicates that the date cache is to be disabled if exceeded. The default value is 0, which means that lookups in the cache continue on cache overflow.
See Also:
About Using a Date Cache in Direct Path Loading of Dates in OCI for a complete description of this attribute and of the four following attributes
- Attribute Data Type
-
ub1 */ub1 *
OCI_ATTR_DIRPATH_DCACHE_HITS
OCI_ATTR_DIRPATH_DCACHE_MISSES
OCI_ATTR_DIRPATH_DCACHE_NUM
OCI_ATTR_DIRPATH_DCACHE_SIZE
OCI_ATTR_DIRPATH_DEF_EXP_CACHE_SIZE
- Mode
-
READ/WRITE
- Description
-
Specifies the number of default expressions that are evaluated at a time. The default is 100. For default expressions that must be evaluated for every row, increasing this value may improve performance.
Valid values:
UB4
- Attribute Data Type
ub4 */ub4 *
- Example
ub4 default_cache = 200; OCIAttrSet ((void *)dpctx, (ub4)OCI_HTYPE_DIRPATH_CTX, (void *)&default_cache, (ub4)0, (ub4)OCI_ATTR_DIRPATH_DEF_EXP_CACHE_SIZE, errhp);
OCI_ATTR_DIRPATH_DEFAULTS
- Mode
-
Read/Write
- Description
-
Specifies how the direct path API handles default expressions for columns that are not explicitly being loaded.
Valid values are:-
OCI_DIRPATH_DEFAULTS_DEFAULT
Evaluate once, unless a sequence is involved, then evaluate every row.
Error if an unsupported default value is seen. This is the default.
-
OCI_DIRPATH_DEFAULTS_EVALUATE_ONCE
Evaluate once, at the start of the load. Error if an unsupported default value is seen.
-
OCI_DIRPATH_DEFAULTS_EVALUATE_EVERY_ROW
Evaluate every row. Error if an unsupported default value is seen.
-
OCI_DIRPATH_DEFAULTS_IGNORE
Ignore all defaults, load NULLs.
-
OCI_DIRPATH_DEFAULTS_IGNORE_UNSUPPORTED_EVALUATE_ONCE
Ignore unsupported defaults, load NULLS, evaluate supported once.
-
OCI_DIRPATH_DEFAULTS_IGNORE_UNSUPPORTED_EVALUATE_EVERY_ROW
Ignore unsupported defaults, load NULLS, evaluate supported every row.
-
- Attribute Data Type
ub1 */ub1 *
- Example
ub1 dirpath_handling = OCI_DIRPATH_DEFAULTS_EVALUATE_EVERY_ROW; OCIAttrSet ((void *)dpctx, (ub4)OCI_HTYPE_DIRPATH_CTX, (void *)&dirpath_handling, (ub4)0, (ub4)OCI_ATTR_DIRPATH_DEFAULTS, errhp);
OCI_ATTR_DIRPATH_FLAGS
- Mode
-
READ/WRITE
- Description
-
Flags used to control behavior of the load.
OCI_DIRPATH_FLAGS_VLDT
0x01 – validate format for OracleNUMBER
andDATE
data when the stream is parsed on the server. The default value is to not set this flag because it is an expensive operation. It can be used when you suspect that there is a problem withOCIDirPath
generating invalid internal representation of dates and numbers. - Example
ub4 dirpath_flags = OCI_ATTR_DIRPATH_FLAGS_VLDT; OCIAttrSet ((void *)dpctx, (ub4)OCI_HTYPE_DIRPATH_CTX, (void *)&dirpath_flags, (ub4)0, (ub4)OCI_ATTR_DIRPATH_FLAGS, errhp);
- Attribute Data Type
-
ub4 *
/ub4 *
OCI_ATTR_DIRPATH_INDEX_MAINT_METHOD
OCI_ATTR_DIRPATH_MODE
OCI_ATTR_DIRPATH_NO_INDEX_ERRORS
OCI_ATTR_DIRPATH_NOLOG
OCI_ATTR_DIRPATH_OBJ_CONSTR
- Mode
-
READ/WRITE
- Description
-
Indicates the object type of a substitutable object table:
OraText *obj_type; /* stores an object type name */ OCIAttrSet((void *)dpctx, (ub4)OCI_HTYPE_DIRPATH_CTX, (void *) obj_type, (ub4)strlen((const char *) obj_type), (ub4)OCI_ATTR_DIRPATH_OBJ_CONSTR, errhp);
- Attribute Data Type
-
oratext **/oratext *
OCI_ATTR_DIRPATH_PARALLEL
OCI_ATTR_DIRPATH_PGA_LIM
OCI_ATTR_DIRPATH_REJECT_ROWS_REPCH
OCI_ATTR_DIRPATH_SKIPINDEX_METHOD
- Mode
-
READ/WRITE
- Description
-
Indicates how the handling of unusable indexes is performed.
Valid values are:-
OCI_DIRPATH_INDEX_MAINT_SKIP_UNUSABLE
(skip unusable indexes) -
OCI_DIRPATH_INDEX_MAINT_DONT_SKIP_UNUSABLE
(do not skip unusable indexes) -
OCI_DIRPATH_INDEX_MAINT_SKIP_ALL
(skip all index maintenance)
-
- Attribute Data Type
-
ub1 *
/ub1 *
OCI_ATTR_DIRPATH_SPILL_PASSES
- Mode
-
READ
- Description
-
The number of passes required to load all partitions. If the direct path PGA limit is exceeded, this will likely be greater than one. Increasing the PGA limit, using the attribute
OCI_ATTR_DIRPATH_PGA_LIM
, can decrease the number of passes, but can also exceed available memory. - Attribute Data Type
-
ub4 *
OCI_ATTR_LIST_COLUMNS
OCI_ATTR_NAME
OCI_ATTR_NUM_COLS
OCI_ATTR_NUM_ROWS
OCI_ATTR_SCHEMA_NAME
OCI_ATTR_SUB_NAME
A.23.2 Direct Path Function Context Handle (OCIDirPathFuncCtx) Attributes
Lists and describes direct path function context handle (OCIDirPathFuncCtx) attributes.
For further explanations of these attributes, see Direct Path Function Context and Attributes.
OCI_ATTR_DIRPATH_EXPR_TYPE
- Mode
-
READ/WRITE
- Description
-
Indicates the type of expression specified in
OCI_ATTR_NAME
in the function context of a nonscalar column.Valid values are:-
OCI_DIRPATH_EXPR_OBJ_CONSTR
(the object type name of a column object) -
OCI_DIRPATH_EXPR_REF_TBLNAME
(table name of a reference object) -
OCI_DIRPATH_EXPR_SQL
(a SQL string to derive the column value)
-
- Attribute Data Type
-
ub1 */ub1 *
OCI_ATTR_LIST_COLUMNS
- Mode
-
READ
- Description
-
Returns the handle to the parameter descriptor for the column list associated with the direct path function context. The column list parameter descriptor can be retrieved after the number of columns (number of attributes or arguments associated with the nonscalar column) is set with the
OCI_ATTR_NUM_COLS
attribute. - Attribute Data Type
-
OCIParam**
OCI_ATTR_NAME
OCI_ATTR_NUM_COLS
OCI_ATTR_NUM_ROWS
A.23.3 Direct Path Function Column Array Handle (OCIDirPathColArray) Attributes
Lists and describes direct path function column array handle (OCIDirPathColArray) attributes.
The following attributes are used for the direct path function column array handle.
OCI_ATTR_COL_COUNT
OCI_ATTR_NUM_COLS
OCI_ATTR_NUM_ROWS
OCI_ATTR_ROW_COUNT
A.23.4 Direct Path Stream Handle (OCIDirPathStream) Attributes
Lists and describes direct path stream handle (OCIDirPathStream) attributes.
The following attributes are used for the direct path stream handle.
OCI_ATTR_BUF_ADDR
OCI_ATTR_BUF_SIZE
OCI_ATTR_ROW_COUNT
OCI_ATTR_STREAM_OFFSET
A.23.5 Direct Path Column Parameter Attributes
Describes how direct path column parameter attributes are used.
The application specifies which columns are to be loaded, and the external format of the data by setting attributes on each column parameter descriptor. The column parameter descriptors are obtained as parameters of the column parameter list by OCIParamGet()
. The column parameter list of the table is obtained from the OCI_ATTR_LIST_COLUMNS
attribute of the direct path context. If a column is nonscalar, then its column parameter list is obtained from the OCI_ATTR_LIST_COLUMNS
attribute of its direct path function context.
Note that all parameters are 1-based.
A.23.5.1 About Accessing Column Parameter Attributes
Lists and describes direct path column parameter attributes.
The following code example illustrates the use of the direct path column parameter attributes for scalar columns. Before the attributes are accessed, you must first set the number of columns to be loaded and get the column parameter list from the OCI_ATTR_LIST_COLUMNS
attribute.
See Also:
Direct Path Load Examples for Scalar Columns for the data structures defined in the listings
... /* set number of columns to be loaded */ OCI_CHECK(ctlp->errhp_ctl, OCI_HTYPE_ERROR, ociret, ctlp, OCIAttrSet((void *)dpctx, (ub4)OCI_HTYPE_DIRPATH_CTX, (void *)&tblp->ncol_tbl, (ub4)0, (ub4)OCI_ATTR_NUM_COLS, ctlp->errhp_ctl)); /* get the column parameter list */ OCI_CHECK(ctlp->errhp_ctl, OCI_HTYPE_ERROR, ociret, ctlp, OCIAttrGet((void *)dpctx, OCI_HTYPE_DIRPATH_CTX, (void *)&ctlp->colLstDesc_ctl, (ub4 *)0, OCI_ATTR_LIST_COLUMNS, ctlp->errhp_ctl));
Now you can set the parameter attributes.
/* set the attributes of each column by getting a parameter handle on each * column, then setting attributes on the parameter handle for the column. * Note that positions within a column list descriptor are 1-based. */ for (i = 0, pos = 1, colp = tblp->col_tbl, fldp = tblp->fld_tbl; i < tblp->ncol_tbl; i++, pos++, colp++, fldp++) { /* get parameter handle on the column */ OCI_CHECK(ctlp->errhp_ctl, OCI_HTYPE_ERROR, ociret, ctlp, OCIParamGet((const void *)ctlp->colLstDesc_ctl, (ub4)OCI_DTYPE_PARAM, ctlp->errhp_ctl, (void **)&colDesc, pos)); colp->id_col = i; /* position in column array */ /* set external attributes on the column */ /* column name */ OCI_CHECK(ctlp->errhp_ctl, OCI_HTYPE_ERROR, ociret, ctlp, OCIAttrSet((void *)colDesc, (ub4)OCI_DTYPE_PARAM, (void *)colp->name_col, (ub4)strlen((const char *)colp->name_col), (ub4)OCI_ATTR_NAME, ctlp->errhp_ctl)); /* column type */ OCI_CHECK(ctlp->errhp_ctl, OCI_HTYPE_ERROR, ociret, ctlp, OCIAttrSet((void *)colDesc, (ub4)OCI_DTYPE_PARAM, (void *)&colp->exttyp_col, (ub4)0, (ub4)OCI_ATTR_DATA_TYPE, ctlp->errhp_ctl)); /* max data size */ OCI_CHECK(ctlp->errhp_ctl, OCI_HTYPE_ERROR, ociret, ctlp, OCIAttrSet((void *)colDesc, (ub4)OCI_DTYPE_PARAM, (void *)&fldp->maxlen_fld, (ub4)0, (ub4)OCI_ATTR_DATA_SIZE, ctlp->errhp_ctl)); if (colp->datemask_col) /* set column (input field) date mask */ { OCI_CHECK(ctlp->errhp_ctl, OCI_HTYPE_ERROR, ociret, ctlp, OCIAttrSet((void *)colDesc, (ub4)OCI_DTYPE_PARAM, (void *)colp->datemask_col, (ub4)strlen((const char *)colp->datemask_col), (ub4)OCI_ATTR_DATEFORMAT, ctlp->errhp_ctl)); } if (colp->prec_col) { OCI_CHECK(ctlp->errhp_ctl, OCI_HTYPE_ERROR, ociret, ctlp, OCIAttrSet((void *)colDesc, (ub4)OCI_DTYPE_PARAM, (void *)&colp->prec_col, (ub4)0, (ub4)OCI_ATTR_PRECISION, ctlp->errhp_ctl)); } if (colp->scale_col) { OCI_CHECK(ctlp->errhp_ctl, OCI_HTYPE_ERROR, ociret, ctlp, OCIAttrSet((void *)colDesc, (ub4)OCI_DTYPE_PARAM, (void *)&colp->scale_col, (ub4)0, (ub4)OCI_ATTR_SCALE, ctlp->errhp_ctl)); } if (colp->csid_col) { OCI_CHECK(ctlp->errhp_ctl, OCI_HTYPE_ERROR, ociret, ctlp, OCIAttrSet((void *)colDesc, (ub4)OCI_DTYPE_PARAM, (void *)&colp->csid_col, (ub4)0, (ub4)OCI_ATTR_CHARSET_ID, ctlp->errhp_ctl)); } /* free the parameter handle to the column descriptor */ OCI_CHECK((void *)0, 0, ociret, ctlp, OCIDescriptorFree((void *)colDesc, OCI_DTYPE_PARAM)); } ...
OCI_ATTR_CHARSET_ID
OCI_ATTR_DATA_SIZE
OCI_ATTR_DATA_TYPE
- Mode
-
READ/WRITE
- Description
-
Returns or sets the external data type of the column. Valid data types are:
-
SQLT_CHR
-
SQLT_DATE
-
SQLT_TIMESTAMP
-
SQLT_TIMESTAMP_TZ
-
SQLT_TIMESTAMP_LTZ
-
SQLT_INTERVAL_YM
-
SQLT_INTERVAL_DS
-
SQLT_CLOB
-
SQLT_BLOB
-
SQLT_INT
-
SQLT_UIN
-
SQLT_FLT
-
SQLT_PDN
-
SQLT_BIN
-
SQLT_NUM
-
SQLT_NTY
-
SQLT_REF
-
SQLT_VST
-
SQLT_VNU
-
- Attribute Data Type
-
ub2 */ub2 *
OCI_ATTR_DATEFORMAT
OCI_ATTR_DIRPATH_OID
OCI_ATTR_DIRPATH_SID
OCI_ATTR_NAME
OCI_ATTR_PRECISION
OCI_ATTR_SCALE
A.24 Process Handle Attributes
Lists and describes process handle attributes.
The parameters for the shared system can be set and read using the OCIAttrSet()
and OCIAttrGet()
calls. The handle type to be used is the process handle OCI_HTYPE_PROC
.
The OCI_ATTR_MEMPOOL_APPNAME
, OCI_ATTR_MEMPOOL_HOMENAME
, and OCI_ATTR_MEMPOOL_INSTNAME
attributes specify the application, home, and instance names that can be used together to map the process to the right shared pool area. If these attributes are not provided, internal default values are used. The following are valid settings of the attributes for specific behaviors:
-
Instance name, application name (unqualified): This allows only executables with a specific name to attach to the same shared subsystem. For example, this allows an OCI application named Office to connect to the same shared subsystem regardless of the directory Office resides in.
-
Instance name, home name: This allows a set of executables in a specific home directory to attach to the same instance of the shared subsystem. For example, this allows all OCI applications residing in the ORACLE_HOME directory to use the same shared subsystem.
-
Instance name, home name, application name (unqualified): This allows only a specific executable to attach to a shared subsystem. For example, this allows one application named Office in the ORACLE_HOME directory to attach to a given shared subsystem.
See Also:
OCI_ATTR_MEMPOOL_APPNAME
OCI_ATTR_MEMPOOL_HOMENAME
OCI_ATTR_MEMPOOL_INSTNAME
OCI_ATTR_MEMPOOL_SIZE
OCI_ATTR_PROC_MODE
- Mode
-
READ
- Description
-
Returns all the currently set process modes. The value read contains the OR'ed value of all the currently set OCI process modes. To determine if a specific mode is set, the value should be AND'ed with that mode. For example:
ub4 mode; boolean is_shared; OCIAttrGet((void *)0, (ub4)OCI_HTYPE_PROC, (void *) &mode, (ub4 *) 0, (ub4)OCI_ATTR_PROC_MODE, 0); is_shared = mode & OCI_SHARED;
- Attribute Data Type
-
ub4 *
A.25 Event Handle Attributes
Lists and describes event handle attributes.
The OCIEvent
handle encapsulates the attributes from the event payload. This handle is implicitly allocated before the event callback is called.
The event callback obtains the attributes of an event using OCIAttrGet()
with the following attributes.
See Also:
OCI_ATTR_DBDOMAIN
OCI_ATTR_DBNAME
OCI_ATTR_EVENTTYPE
OCI_ATTR_HA_SOURCE
- Mode
-
READ
- Description
-
If the event type is
OCI_EVENTTYPE_HA
, get the source of the event with this attribute. Valid values are:-
OCI_HA_SOURCE_DATABASE
-
OCI_HA_SOURCE_NODE
-
OCI_HA_SOURCE_INSTANCE
-
OCI_HA_SOURCE_SERVICE
-
OCI_HA_SOURCE_SERVICE_MEMBER
-
OCI_HA_SOURCE_ASM_INSTANCE
-
OCI_HA_SOURCE_SERVICE_PRECONNECT
-
- Attribute Data Type
-
ub4 *
OCI_ATTR_HA_SRVFIRST
OCI_ATTR_HA_SRVNEXT
OCI_ATTR_HA_STATUS
OCI_ATTR_HA_TIMESTAMP
OCI_ATTR_HOSTNAME
OCI_ATTR_INSTNAME
- Mode
-
READ
- Description
-
When called as an event handle attribute,
OCIAttrGet()
retrieves the name of the instance that has been affected by this event. This is also a server handle attribute. This attribute can also be used on service context to return the shard instance name for a given connection. This attribute can be used to find the shard instance name out of a shard instance descriptor that is filed by anOCIShardInstancesGet()
call. - Attribute Data Type
-
oratext **
- Example
-
The following example shows for a given connection (svchp) how to get the shard instance name.
Oratext instanceName [OCI_INSTNAME_MAXLEN]; ub4 instanceNameLen; OCIATTRGet(svchp, OCI_HTYPE_SVCCTX, instanceName, (ub4 *) &instanceNameLen, OCI_ATTR_INSTNAME, errhp);
OCI_ATTR_INSTSTARTTIME
OCI_ATTR_SERVICENAME