1. EAGLE Commands User's Guide
  2. Introduction

1 Introduction

This chapter contains a brief description of the Commands User's Guide. The contents include sections about the manual scope, audience, and organization; how to find related publications; and how to contact Oracle for assistance.

Overview

The Commands User's Guide provides a description of all commands used in the Oracle Communications EAGLE. The use of the term "the system" indicates that the information is common to all of the functions of the EAGLE.

Scope and Audience

This manual is intended for those who maintain and perform administration on the EAGLE. It is assumed that the user is familiar with the SS7 network and its associated protocols. The manual describes commands used in the system, and it contains a special section on debug commands and their descriptions.

Debug commands are a special group of commands used in troubleshooting and debugging the system. These commands are intended for Customer Care Center personnel and authorized engineering personnel in the operating companies. The use of these commands is restricted to those personnel who have access to the “Debug” command class.

Documentation Admonishments

Admonishments are icons and text throughout this manual that alert the reader to assure personal safety, to minimize possible service interruptions, and to warn of the potential for equipment damage.

Table 1-1 Admonishments

Icon Description
img/danger.png

Danger:

(This icon and text indicate the possibility of personal injury.)

img/warning.png

Warning: 

(This icon and text indicate the possibility of equipment damage.)

img/caution.png

Caution: 

(This icon and text indicate the possibility of service interruption.)

img/topple.png

Topple:

(This icon and text indicate the possibility of personal injury and equipment damage.)

Manual Organization

This document is organized into the following chapters:
  • Introduction contains general information about the Commands Manual, the organization of the manual and how to get technical assistance.
  • Using Commands describes the system's Maintenance and Administration subsystem and input/output devices. This chapter also provides the method for entering commands and logging into and out of the system.
  • Alphabetical List of Commands contains an alphabetical list of the Tekelec Signaling Products (Eagle, STP, IP7 Secure Gateway, and IP7 Front End) commands.
  • Commands describes all commands that are not pass-through or debug commands.
  • Debug Commands describes all debug commands.
  • Pass-Through Commands describes all pass-through commands.
  • Reference Information contains general information that is used by multiple commands, including point code format and conversion information, mapping tables, lists of commands by class, and loopbcck information.
  • Acronyms and Abbreviationscontains all acronyms and abbreviations used in the Commands Manual.

Note:

Throughout this manual, reference to the OAP (Operation System Support Application Processor) applies also to the EOAP (Enhanced Operation System Support Application Process).