5 Measurements
This chapter describes the measurements information available from the EAGLE for the G-Port feature.
5.1 G-Port Measurements
Refer to Measurements Reference for information about measurement systems and reporting.
Refer to Commands User's Guide for descriptions of commands used to generate, schedule, and transfer measurements reports.
Refer to Database Administration - System Management User's Guide for provisioning information and procedures for these measurement systems:
-
OAM-based Measurements - G-Port measurements are available using the File Transfer Area (FTA) feature and not directly by EAGLE terminals.
-
Measurements Platform
-
E5-OAM Integrated Measurements
Table 5-1 describes the peg counts of Message Signalling Units (MSUs) supported per-system for the G-Port feature.
Table 5-1 Pegs for Per System G-Port Measurements
| Event Name | Description | Type | Unit |
|---|---|---|---|
|
GPSRRCV |
Number of call-related SRI messages received. Peg counts for register GPSRRCVPP are not included in this register. |
System |
Peg count |
|
GPSRGTT |
Number of call-related SRI messages that fell through to GTT. Peg counts for register GPSRGTTPP are not included in this register. |
System |
Peg count |
|
GPSRREP |
Number of call-related SRI messages that received G-Port service. Peg counts for register GPSRREPPP are not included in this register. |
System |
Peg count |
|
GPSRERR |
Number of call-related messages that cause SRI negative ack messages because of G-Port service failure. Peg counts for register GPSRERRPP are not included in this register. |
System |
Peg count |
Table 5-2 describes the peg counts of Message Signalling Units (MSUs) supported per-SSP for the G-Port feature.
Table 5-2 Pegs for Per SSP G-Port Measurements
| Event Name | Description | Type | Unit |
|---|---|---|---|
|
GPSRACK |
Number of call-related SRI ack messages. Peg counts for register GPSRACKPP are not included in this register. |
Point Code |
Peg count |
|
GPSRNACK |
Number of call-related SRI negative ack messages in successful G-Port service |
Point Code |
Peg count |
|
GPSRRLY |
Number of call-related SRI messages relayed |
Point Code |
Peg count |
Table 5-3 describes the peg counts of Message Signalling Units (MSUs) supported both per-system and per-SSP for the G-Port feature.
Table 5-3 Pegs for Per System and Per SSP G-Port Measurements
| Event Name | Description | Type | Unit |
|---|---|---|---|
|
GPNOCL |
Number of non-call-related messages relayed by G-Port |
System, Point Code |
Peg count |
|
GPNOCLGT |
Number of non-call-related messages that fell through to GTT |
System, Point Code |
Peg count |
|
GPSRSMREP |
Number of SRI_SM messages that result in SRI_SM_ACK or SRI_SM_NACK responses |
System, Point Code |
Peg count |
|
GPSRSMERR |
Number of SRI_SM messages that result in error |
System, Point Code |
Peg count |
|
GPSRSMRCV |
Number of SRI_SM messages received |
System, Point Code |
Peg Count |
|
MNPCRD |
Number of times Circular Route is detected |
System, Point Code |
Peg Count |
Table 5-4 describes the peg counts of Message Signalling Units (MSUs) supported for the G-Port SRI Query for Prepaid feature.
Table 5-4 Pegs for G-Port SRI Query for Prepaid Measurements
| Event Name | Description | Type | Unit |
|---|---|---|---|
|
GPSRACKPP |
Number of call-related SRI ack messages for G-Port SRI Query for Prepaid feature. Peg counts for register GPSRACK are not included in this register. |
Point Code |
Peg Count |
|
GPSRGTTPP |
Number of call-related SRI messages that fell through to GTT for G-Port SRI Query for Prepaid feature. Peg counts for register GPSRGTT are not included in this register. |
System |
Peg Count |
|
GPSRRCVPP |
Number of call-related SRI messages received for G-Port SRI Query for Prepaid feature. Peg counts for register GPSRRCV are not included in this register. |
System |
Peg Count |
|
GPSRERRPP |
Number of call-related messages that cause SRI negative ack messages for G-Port SRI Query for Prepaid feature. Peg counts for register GPSRERR are not included in this register. |
System |
Peg Count |
|
GPSRREPPP |
Number of call-related SRI messages that received G-Port service for G-Port SRI Query for Prepaid feature. Peg counts for register GPSRREP are not included in this register. |
System |
Peg Count |
The following equations apply:
GPSRRCV = GPSRGTT + GPSRREP + GPSRERR
GPSRCVPP = GPSRGTTPP + GPSRREPPP + GPSRERRPP
GPSRREP = ∑GPSRACK + ∑GPSRRLY + ∑GPSRNACK
The following measurement events are included on the STP Daily Maintenance (MTCD) and STP Day-to-Hour (MTCDTH) measurement reports and include peg counts for G-Port MSUs.