4.23 aud-data
Use this command to perform a data audit, which is used to determine the integrity of the static and dynamic databases. This command can also be used to perform a separate GPL audit.
Parameters
- ddbqp (optional)
- DDB quiet period. The minimum DDB idle time, in milliseconds, during which no DDB updates are applied. After the quiet period, it is assumed that all DDB updates in the system have been processed, and no outstanding in-flight multi-cast updates exist.
If the idle period that is reported by the network card is less than the quiet period, then additional network responses are discarded, and the DDB audit process restarts. Up to three retries of the DDB audit process are performed by system. If all of the retry efforts fail, then the system status of the DDB audit report is marked as ABORTED.
- display (optional)
- This parameter specifies whether a brief or full display is provided for the audit.
This parameter applies to static and dynamic STP databases.
- Range:
-
- all
- For the static database, displays the checksum values, in hexadecimal, and details for each GPL and each subset of the current and backup database. For the dynamic database, displays the checksum values, in hexadecimal, for each dynamic database table on MTP cards.
- brief
- For the static database, displays the data collections for the current database, the backup database on the fixed disk, and the approved and trial GPLs. For the dynamic database, displays the system status with number of cards responded with or without checksum, the list of inconsistent cards, list of non-responding cards, number of cards not meeting quiet period requirement, number of cards responded with "DDB update in progess", and active MTP cards in system.
- except
- For GPLs or database subsets with problems, displays the same information as display=all
- Default:
- brief
Example
aud-data:type=ddb:display=brief
aud-data:type=ddb:ddbqp=1000
aud-data:display=except
aud-data:tblid=127
aud-data:gplqp=3
Dependencies
Only one aud-data command can be in progress at a time.
If the type=ddb parameter is specified, then the except parameter cannot be specified.
If the ddbqp parameter is specified, then the type=ddb parameter must be specified.
If the gplqp parameter is specified, then the tblid, ddbqp, and type=ddb parameters cannot be specified.
The display and tblid parameters cannot be specified together in the command.
The DMS table specified by the tblid parameter must already exist.
If the system is in upgrade mode, then this command cannot be entered.
Notes
Static Audit
The standby OAM must be available when the aud-data command for audit begins so that the standby OAM can receive the signal to begin auditing. If the standby OAM is not available when aud-data is issued, then the following messages are issued:
Extended Processing Time Required
Standby MASP is (or was) not available at audit start.
The above messages may also appear if the standby OAM is not available when the hourly periodic audit, which uses the aud-data command, automatically starts. The standby OAM is not performing any data auditing, so no audit results for the standby OAM are displayed in the audit report. Instead, the standby’s audit results are as follows:
No information currently available
If an auditing cycle completes on either the active or standby OAM and does not produce the full set of expected results (checksums), the following message appears:
Audit results may be incomplete
The audit results may be missing some of the checksums that would normally be displayed (display=all or display=except). The results may also contain summary status information (display=brief) that might have been calculated differently had some of the missing checksums been available. This condition can be caused if the audit results for the backup database are missing, probably because a backup database has not been created.
If the "Audit results may be incomplete" message appears in the audit report, perform the following procedure:
Audit Data
- Ensure that the standby OAM is online and ready.
- Ensure that a backup database has been created. Use
rept-stat-dbcommand to check whether a backup database has been created.If no backup has ever been created, the output of
rept-stat-dbcommand shows the fixed disk backup (FD BKUP) database at level 1. There will be no information under the heading "Time Last Backup." - If necessary, create a backup on the fixed disk by entering the following command:
chg-db:action=backup:dest=fixed. - Re-enter the
aud-datacommand.
If the standby OAM does not run a audit cycle and no audit information is available, the following message appears:
Audit results are not available
This condition is probably caused by the standby OAM rebooting while a audit cycle is underway. If this message appears, ensure that the standby OAM is available and re-enter the aud-data command. Ensure that the standby OAM remains up (is not rebooted) for the duration of the audit cycle.
Dynamic Audit
The aud-data command is enhanced to allow a Dynamic data audit to be triggered manually.
If a dynamic background audit is already running, and the aud-data command is issued for a dynamic audit, then the following message appears.
Periodic dynamic database audit is running with default quiet period.
Results will be displayed on completion.
The Standby OAM is not required for a dynamic audit.
Output
This example shows output for a full display of a fixed database audit:
aud-data:display=all
rlghncxa03w 09-07-07 10:39:04 EST EAGLE 41.1.0
DATA AUDIT COMPLETE (GPL AUD Quiet Period set to 3)
CARD LOC DATA STATUS NEW CS OLD CS REF CS
TDM-ACTV 1114 CRNT MTP SUBSET OK H'ffaf H'ffaf H'ffaf
CRNT GTT SUBSET OK H'5864 H'5864 H'5864
CRNT GWS SUBSET OK H'd089 H'd089 H'd089
CRNT MISC SUBSET OK H'2735 H'2735 H'2735
CRNT DBMM SUBSET OK H'1001 H'1001 H'1001
BKUP MTP SUBSET OK H'2b85 H'2b85 H'2b85
BKUP GTT SUBSET OK H'5864 H'5864 H'5864
BKUP GWS SUBSET OK H'd089 H'd089 H'd089
BKUP MISC SUBSET OK H'5af1 H'5af1 H'5af1
BKUP DBMM SUBSET OK H'1001 H'1001 H'1001
APPR ATMANSI GPL OK H'1372 H'1372 H'1372
TRI ATMANSI GPL OK H'1372 H'1372 H'1372
APPR VSCCP GPL OK H'9251 H'9251 H'9251
TRI VSCCP GPL OK H'9251 H'9251 H'9251
APPR GLS GPL OK H'8887 H'8887 H'8887
TRI GLS GPL OK H'8887 H'8887 H'8887
APPR UTILITY GPL OK H'18de H'18de H'18de
TRI UTILITY GPL OK H'18de H'18de H'18de
APPR OK H'b6c6 H'b6c6 H'b6c6
TRI OK H'b6c6 H'b6c6 H'b6c6
rlghncxa03w 09-07-07 10:39:04 EST EAGLE 41.1.0
DATA AUDIT COMPLETE (GPL AUD Quiet Period set to 3)
CARD LOC DATA STATUS NEW CS OLD CS REF CS
TDM-STDBY 1116 CRNT MTP SUBSET OK H'ffaf H'ffaf H'ffaf
CRNT GTT SUBSET OK H'5864 H'5864 H'5864
CRNT GWS SUBSET OK H'd089 H'd089 H'd089
CRNT MISC SUBSET OK H'2735 H'2735 H'2735
CRNT DBMM SUBSET OK H'1001 H'1001 H'1001
BKUP MTP SUBSET OK H'2b85 H'2b85 H'2b85
BKUP GTT SUBSET OK H'5864 H'5864 H'5864
BKUP GWS SUBSET OK H'd089 H'd089 H'd089
BKUP MISC SUBSET OK H'5af1 H'5af1 H'5af1
BKUP DBMM SUBSET OK H'1001 H'1001 H'1001
APPR ATMANSI GPL OK H'1372 H'1372 H'1372
TRI ATMANSI GPL OK H'1372 H'1372 H'1372
APPR VSCCP GPL OK H'9251 H'9251 H'9251
TRI VSCCP GPL OK H'9251 H'9251 H'9251
APPR GLS GPL OK H'8887 H'8887 H'8887
TRI GLS GPL OK H'8887 H'8887 H'8887
APPR UTILITY GPL OK H'18de H'18de H'18de
TRI UTILITY GPL OK H'18de H'18de H'18de
APPR OK H'b6c6 H'b6c6 H'b6c6
TRI OK H'b6c6 H'b6c6 H'b6c6
;
aud-data:display=except
rlghncxa03w 09-07-07 10:39:04 EST EAGLE 41.1.0
Extended Processing Time Required
Results will be displayed on completion
rlghncxa03w 09-07-07 10:39:04 EST EAGLE 41.1.0
DATA AUDIT COMPLETE (GPL AUD Quiet Period set to 3):
CARD LOC DATA STATUS NEW CS OLD CS REF CS
TDM-ACTV 1116 CRNT MTP SUBSET DIFFERENT H'aaaa H'aaaa H'cccc
CRNT GTT SUBSET CORRUPTED H'aaaa H'bbbb H'aaaa
APPR MCM GPL CORRUPTED H'4321 H'3456 H'4321
APPR GLS GPL CORRUPTED H'4321 H'3456 H'4321
APPR VSCCP GPL CORRUPTED H'4321 H'3456 H'4321
rlghncxa03w 09-07-07 10:39:01 EST EAGLE 41.1.0
Extended Processing Time Required
Results will be displayed on completion
rlghncxa03w 09-07-07 10:39:04 EST EAGLE 41.1.0
DATA AUDIT COMPLETE (GPL AUD Quiet Period set to 3):
CARD LOC DATA STATUS NEW CS OLD CS REF CS
TDM-STDBY 1114 CRNT MTP SUBSET DIFFERENT H'aaaa H'aaaa H'cccc
CRNT GTT SUBSET CORRUPTED H'aaaa H'bbbb H'aaaa
APPR MCM GPL CORRUPTED H'4321 H'3456 H'4321
APPR GLS GPL CORRUPTED H'4321 H'3456 H'4321
APPR VSCCP GPL CORRUPTED H'4321 H'3456 H'4321
;
This example shows output for a brief display of a fixed database audit:
aud-data or aud-data:display=brief
rlghncxa03w 09-07-07 10:39:04 EST EAGLE 41.1.0
DATA AUDIT COMPLETE (GPL AUD Quiet Period set to 3):
CARD LOC DATA STATUS
TDM-ACTV 1114 CRNT DB OK
BKUP DB OK
GPLS OK
rlghncxa03w 09-07-07 10:39:04 EST EAGLE 41.1.0
DATA AUDIT COMPLETE (GPL AUD Quiet Period set to 3):
CARD LOC DATA STATUS
TDM-STDBY 1116 CRNT DB OK
BKUP DB OK
GPLS OK
;
This example shows output for a full dynamic database audit:
aud-data:type=ddb:display=all
tekelecstp 09/07/21 17:04:47 GMT EAGLE 41.1.0
DDB AUDIT REPORT
SYSTEM STATUS : INCONSISTENT
ACTIVE MTP CARDS : 21
NON RESPONDING CARDS : 7: 1207 1208 1211 1212 2108 2111 2112
RESPONDING CARDS : 14
CARDS WITH NO DATA : 2
CARDS WITH DATA : 12
CARDS FAILING QUIET PRD : 0
CARDS WITH DDB UPD IN PRG : 3
CARDS CONSIDERED FOR CKSM : 9
INCONSISTENT CARDS : 2: 1203 2103
CONSISTENT CARDS : 7
AUDIT START TIME : 21/07/2009 17:04:46
QUIET PERIOD : 600 ms
RTE LINK SET LINK CM CARD CM CLSTR MATED APPL MTP GLOBLS
LOC STATUS CAUSE IDLE DDB UPD ADDN'L STATUS
H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8
1201 CONSISTENT 700 1000
H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8
1202 CONSISTENT 700 1000
H'000007d0 H'000007d0 H'000007d0 H'000007d0 H'000007d0 H'000007d0 H'000007d0
1203 INCONSISTENT 700 1000
---------- ---------- ---------- ---------- ---------- ---------- ----------
1204 NODATA (DDB INIT) ---------- ----------
H'00000bb8 H'00000bb8 H'00000bb8 H'00000bb8 H'00000bb8 H'00000bb8 H'00000bb8
1205 IN UPDATE 1 (TSRC,DDB) 700 1000 (IGNORED)
H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8
1206 CONSISTENT 700 1000
---------- ---------- ---------- ---------- ---------- ---------- ----------
1207 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
1208 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
1211 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
1212 NORESP ---------- ----------
H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8
1213 CONSISTENT 700 1000
H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 ---------- H'000003e8
2101 CONSISTENT 700 1000
H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 ---------- H'000003e8
2102 CONSISTENT 700 1000
H'000007d0 H'000007d0 H'000007d0 H'000007d0 H'000007d0 ---------- H'000007d0
2103 INCONSISTENT 700 1000 (WWA UPD=2)
---------- ---------- ---------- ---------- ---------- ---------- ----------
2104 NODATA (DDL XLOAD) ---------- ----------
H'00000bb8 H'00000bb8 H'00000bb8 H'00000bb8 H'00000bb8 ---------- H'00000bb8
2105 IN UPDATE 2 (DDB) 700 1000 (IGNORED)
H'00000bb8 H'00000bb8 H'00000bb8 H'00000bb8 H'00000bb8 ---------- H'00000bb8
2106 IN UPDATE 2 (TSRC,DDB) 700 1000 (IGNORED)
H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 ---------- H'000003e8
2107 CONSISTENT 700 1000
---------- ---------- ---------- ---------- ---------- ---------- ----------
2108 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
2111 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
2112 NORESP ---------- ----------
;
This example shows output for a brief dynamic database audit:
aud-data:type=ddb:display=brief
tekelecstp 09-07-15 07:34:13 GMT EAGLE 41.1.0
DDB AUDIT REPORT
SYSTEM STATUS : OK
ACTIVE MTP CARDS : 10
NON RESPONDING CARDS : 0
RESPONDING CARDS : 10
CARDS WITH NO DATA : 0
CARDS WITH DATA : 10
CARDS FAILING QUIET PRD : 0
CARDS WITH DDB UPD IN PRG : 0
CARDS CONSIDERED FOR CKSM : 10
INCONSISTENT CARDS : 0
CONSISTENT CARDS : 0
AUDIT START TIME : 15/07/2009 07:34:12
QUIET PERIOD : 20 ms
;
aud-data:tblid=127
audit 09-08-12 15:49:28 EST EAGLE 41.1.0
Extended processing time required.
Results will be displayed on completion.
;
audit 09-08-12 15:50:08 EST EAGLE 41.1.0
CARD LOC TABLE ID STATUS NEW CS OLD CS REF CS
TDM-ACTV 1114 127 OK H'cb03 H'cb03 H'cb03
;
TABLE mtt.tbl AUDIT COMPLETE:
CARD LOC TABLE ID STATUS NEW CS OLD CS REF CS
TDM-STDBY 1116 127 OK H'cb03 H'cb03 H'cb03
This example shows output for a full DDB audit when the status is ABORTED. Cards marked ("?") reported correct replies but their status was not evaluted.
aud-data:type=ddb:display=all:ddbqp=600
tekelecstp 09-07-21 21:07:57 GMT EAGLE 41.1.0
DDB AUDIT REPORT
SYSTEM STATUS : ABORTED
ACTIVE MTP CARDS : 21
NON RESPONDING CARDS : 18: 1207 1208 1211 1212 2108 2111 2112 2113
RESPONDING CARDS : 3
CARDS WITH NO DATA : 0
CARDS WITH DATA : 3
CARDS FAILING QUIET PRD : 1
CARDS WITH DDB UPD IN PRG : 1
CARDS CONSIDERED FOR CKSM : 0
INCONSISTENT CARDS : 0
CONSISTENT CARDS : 0
AUDIT START TIME : 21/07/2009 21:07:54
QUIET PERIOD : 600 ms
RTE LINK SET LINK CM CARD CM CLSTR MATED APPL MTP GLOBLS
LOC STATUS CAUSE IDLE DDB UPD ADDN'L STATUS
H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8
1201 NQUIET 100 1000
H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8
1202 IN UPDATE 1 (DDB) 700 1000
H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8
1203 ? 700 1000
---------- ---------- ---------- ---------- ---------- ---------- ----------
1204 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
1205 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
1206 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
1207 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
1208 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
1211 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
1212 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
1213 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
2101 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
2102 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
2103 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
2104 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
2105 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
2106 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
2107 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
2108 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
2111 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
2112 NORESP ---------- ----------
;
aud-data:display=alltekelecstp 16-08-25 10:39:04 EST EAGLE 46.5.0
DATA AUDIT COMPLETE (GPL AUD Quiet Period set to 3)
CARD LOC DATA STATUS NEW CS OLD CS REF CS
TDM-ACTV 1114 CRNT MTP SUBSET OK H'ffaf H'ffaf H'ffaf
CRNT GTT SUBSET OK H'5864 H'5864 H'5864
CRNT GWS SUBSET OK H'd089 H'd089 H'd089
CRNT MISC SUBSET OK H'2735 H'2735 H'2735
CRNT DBMM SUBSET OK H'1001 H'1001 H'1001
BKUP MTP SUBSET OK H'2b85 H'2b85 H'2b85
BKUP GTT SUBSET OK H'5864 H'5864 H'5864
BKUP GWS SUBSET OK H'd089 H'd089 H'd089
BKUP MISC SUBSET OK H'5af1 H'5af1 H'5af1
BKUP DBMM SUBSET OK H'1001 H'1001 H'1001
APPR ATMANSI GPL OK H'1372 H'1372 H'1372
TRI ATMANSI GPL OK H'1372 H'1372 H'1372
APPR VSCCP GPL OK H'9251 H'9251 H'9251
TRI VSCCP GPL OK H'9251 H'9251 H'9251
APPR IPSG32 GPL OK H'4261 H'4261 H'4261
TRI IPSG32 GPL OK H'4261 H'4261 H'4261
APPR GLS GPL OK H'8887 H'8887 H'8887
TRI GLS GPL OK H'8887 H'8887 H'8887
APPR UTILITY GPL OK H'18de H'18de H'18de
TRI UTILITY GPL OK H'18de H'18de H'18de
APPR OK H'b6c6 H'b6c6 H'b6c6
TRI OK H'b6c6 H'b6c6 H'b6c6
tekelecstp 16-08-25 10:39:04 EST EAGLE 46.5.0
DATA AUDIT COMPLETE (GPL AUD Quiet Period set to 3)
CARD LOC DATA STATUS NEW CS OLD CS REF CS
TDM-STDBY 1116 CRNT MTP SUBSET OK H'ffaf H'ffaf H'ffaf
CRNT GTT SUBSET OK H'5864 H'5864 H'5864
CRNT GWS SUBSET OK H'd089 H'd089 H'd089
CRNT MISC SUBSET OK H'2735 H'2735 H'2735
CRNT DBMM SUBSET OK H'1001 H'1001 H'1001
BKUP MTP SUBSET OK H'2b85 H'2b85 H'2b85
BKUP GTT SUBSET OK H'5864 H'5864 H'5864
BKUP GWS SUBSET OK H'd089 H'd089 H'd089
BKUP MISC SUBSET OK H'5af1 H'5af1 H'5af1
BKUP DBMM SUBSET OK H'1001 H'1001 H'1001
APPR ATMANSI GPL OK H'1372 H'1372 H'1372
TRI ATMANSI GPL OK H'1372 H'1372 H'1372
APPR VSCCP GPL OK H'9251 H'9251 H'9251
TRI VSCCP GPL OK H'9251 H'9251 H'9251
APPR IPSG32 GPL OK H'4261 H'4261 H'4261
TRI IPSG32 GPL OK H'4261 H'4261 H'4261
APPR GLS GPL OK H'8887 H'8887 H'8887
TRI GLS GPL OK H'8887 H'8887 H'8887
APPR UTILITY GPL OK H'18de H'18de H'18de
TRI UTILITY GPL OK H'18de H'18de H'18de
APPR OK H'b6c6 H'b6c6 H'b6c6
TRI OK H'b6c6 H'b6c6 H'b6c6
;
Legend
Fixed Audit
- CARD—Card type
- LOC—Card location
- DATA—Type of data being audited:
- APPR—Approved GPL
- BKUP—Database in the backup partition
- CRNT—Database in the current partition
- DBMM—Database management mechanism database
- GLS—GLS GPL
- GTT—Global title translation database
- GWS—Gateway screening database
- MISC—Miscellaneous system configuration database
- MTP—Message transfer part database (links, linksets, routing tables)
- VSCCP—VSCCP GPL
- IPSG32— IPSG32 GPL (GPL to be loaded on SLIC cards to run IPSG application with GTT functionality or without it)
- ATMANSI—ATMANSI GPL
- SUBSET orGPL—Indicates whether the data is a part of the database or a generic program load.
- TRI—Trial GPL
- STATUS—Status of the database or GPL:
- CORRUPTED—The database or GPL has been changed by some abnormal process. The GPL cannot be used.
- DIFFERENT—The database or GPL contains information that is not consistent with the reference database or GPL
- OK—The database or GPL is not corrupted and contains the same information as the reference database or GPL
- NEW CS—New checksum value calculated by this command
- OLD CS—Checksum value stored in the database or GPL
- REF CS—Reference checksum value stored on the active MASP
Dynamic DDB Audit
- SYSTEM STATUS:
- OK—DDB is consistent on all active MTP cards or no active MTP card is present in system
- INCONSISTENT—DDB is inconsistent
- UNKNOWN—"All active MTP cards in the system responded without the checksum of DDB table" or "No active MTP card in the system responded to audit request"
- ABORTED—"Checksums collected failed to meet the quiet period requirement" or "Number of cards responded with "DDB update in progess" greater than 25% number of cards responded with data"
- ACTIVE MTP CARDS—Number of active MTP cards
- NON RESPONDING CARDS—Number of non-responding cards
- RESPONDING CARDS—Number of responding cards
- CARDS WITH NO DATA—Cards sending replies without the checksum of dynamic tables, due to incomplete DDL crossload or DDB initialization
- CARDS WITH DATA—Cards sending replies with checksums
- CARDS FAILING QUIET PRD—Cards failing quiet time requirement
- CARDS WITH DDB UPD IN PRG—Cards sending replies marked as "DDB update in progess" due to DDB checksum not evaluated completely or TSRC task is incomplete
- CARDS CONSIDERED FOR CKSM—Cards sending correct replies. Replies are not marked with "DDB update in progess" or "Reply with no data".
- INCONSISTENT CARDS—Cards that are inconsistent
- CONSISTENT CARDS—Cards that are consistent
- AUDIT START TIME—Time that the audit started (DD/MM/YYYYY hh:ms:ss format)
- QUIET PERIOD—Minimum DDB idle time, in milliseconds, during which no DDB updates are applied
- RTE—Checksum of RTE Table
- LINK SET—Checksum of Link Set Table
- LINK—Checksum of Link Table
- CM CARD—Checksum of CM Card
- CM CLSTR—Checksum of CM Cluster
- MATED APPL—Checksum of Mated Application
- MTP GLOBLS—Checksum of MTP Globals Table
- IDLE (PERIOD)—Time elapsed, in milliseconds, since the last DDB update was received by this card
- DDB UPD—Total DDB updates received on the card
- ADDN'L STATUS—Display more information for the card, including WWA updates or whether card is considered for audit calculations
- CAUSE—Display the reason for sending replies of type "reply with no data " or "DDB update in progress". This value can be DDL (crossload not completed), DDB (dynamic database is not initialised), (TSRC, DDB) (TSRC task is not completed) or DDB (checksums still needs to apply on tables).
- ?—Card status is not evaluated (inconsistent/consistent) if the system status is marked as "ABORTED"
- IGNORED—Card responded with "DDB update in progess" and is not considered for calculating system status
- WWA UPD—Number of entries that were updated by the WWA