4.402 rept-stat-ddb
Use this command to obtain the most recent dynamic database (DDB) audit report. The DDB audit report displays the checksums of the Route, Linkset, Link, CM Card, CM Cluster, Mated Application, and MTP globals. The report displays the exact status of active MTP card after audit and cause of that status.
Parameters
- filter (optional)
- This parameter provides a full DDB audit report for cards that meet the specified criteria.
- Range:
-
- resp
- Responding cards
- nrsp
- Non-responding cards
- incn
- Inconsistent cards
- cons
- Consistent cards
- ncons
- Not-consistent cards: includes cards marked as inconsistent, DDB update in progress, having idle period less than quiet period, and sending replies marked as NO_DATA
- ndat
- Cards marked as "No Data" because the checksum of dynamic tables is not available
- nddl
- Cards marked as "No Data " because the checksum of dynamic tables is not available due to the DDL crossload being in incomplete state
- nddb
- Cards marked as "No Data" because the checksum of dynamic tables is not available due to non-initialization of DDB
- duip
- Cards returning replies marked as "DDB update in progress"
- duipt
- Cards returning replies marked as "DDB update in progress" due to incomplete evaluation of TSRC task
- duipc
- Cards returning replies marked as "DDB update in progress" due to incomplete checksum calculation
- nquiet
- Cards returning replies having idle period less than the quiet period
- list (optional)
-
This parameter displays a list of cards that meet the specified criteria.
- Range:
-
- resp
- Responding cards
- nrsp
- Non-responding cards
- incn
- Inconsistent cards
- cons
- Consistent cards
- ncons
- Not-consistent cards, including cards marked as inconsistent, DDB update in progress, having idle period less than quiet period, and sending replies marked as NO_DATA
- ndat
- Cards marked as "No Data " because the checksum of dynamic tables is not available
- nddl
- Cards marked as "No Data " because the checksum of dynamic tables is not available due to the DDL crossload being in incomplete state
- nddb
- Cards marked as "No Data " because the checksum of dynamic tables is not available due to non-initialization of the DDB
- duip
- Cards returning replies marked as "DDB update in progress"
- duipt
- Cards returning replies marked as "DDB update in progress" due to incomplete evaluation of TSRC task
- duipc
- Cards returning replies marked as "DDB update in progress" due to incomplete checksum calculation
- nquiet
- Cards returning replies marked as having the idle period less than the quiet period
Example
rept-stat-ddb
rept-stat-ddb:display=all
rept-stat-ddb:list=resp
rept-stat-ddb:filter=nddb
Dependencies
Audit data is available only if the execution of a periodic or manual DDB audit is complete (see the aud-data
command).
If the system is in upgrade mode, then this command cannot be entered.
The display, list, and filter parameters cannot be specified together in the command.
Notes
A question mark (?) indicates that the corresponding card's status is not evaluated (Inconsistent/Consistent) when system status is marked as ABORTED.
Cards having an additional status of IGNORED responded with "DDB update in progress". These cards are not considered for calculating system status.
Output
The MATED APPL field is displayed only for Service Module cards.
rept-stat-ddb:display=all
tekelecstp 09-07-21 21:10:17 GMT EAGLE 41.1.0
DDB AUDIT REPORT
SYSTEM STATUS : INCONSISTENT
ACTIVE MTP CARDS : 21
NON RESPONDING CARDS : 7: 1207 1208 1211 1212 2108 2111 2112
RESPONDING CARDS : 14
CARDS WITH NO DATA : 2
CARDS WITH DATA : 12
CARDS FAILING QUIET PRD : 0
CARDS WITH DDB UPD IN PRG : 3
CARDS CONSIDERED FOR CKSM : 9
INCONSISTENT CARDS : 2: 1203 2103
CONSISTENT CARDS : 7
AUDIT START TIME : 21/07/2009 21:07:54
QUIET PERIOD : 600 ms
RTE LINK SET LINK CM CARD CM CLSTR MATED APPL MTP GLOBLS
LOC STATUS CAUSE IDLE DDB UPD ADDN'L STATUS
H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8
1201 CONSISTENT 700 1000
H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8
1202 CONSISTENT 700 1000
H'000007d0 H'000007d0 H'000007d0 H'000007d0 H'000007d0 H'000007d0 H'000007d0
1203 INCONSISTENT 700 1000
---------- ---------- ---------- ---------- ---------- ---------- ----------
1204 NODATA (DDB INIT) ---------- ----------
H'00000bb8 H'00000bb8 H'00000bb8 H'00000bb8 H'00000bb8 H'00000bb8 H'00000bb8
1205 IN UPDATE 1 (TSRC,DDB) 700 1000 (IGNORED)
H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8
1206 CONSISTENT 700 1000
---------- ---------- ---------- ---------- ---------- ---------- ----------
1207 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
1208 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
1211 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
1212 NORESP ---------- ----------
H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8
1213 CONSISTENT 700 1000
H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 ---------- H'000003e8
2101 CONSISTENT 700 1000
H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 ---------- H'000003e8
2102 CONSISTENT 700 1000
H'000007d0 H'000007d0 H'000007d0 H'000007d0 H'000007d0 ---------- H'000007d0
2103 INCONSISTENT 700 1000 (WWA UPD=2)
---------- ---------- ---------- ---------- ---------- ---------- ----------
2104 NODATA (DDL XLOAD) ---------- ----------
H'00000bb8 H'00000bb8 H'00000bb8 H'00000bb8 H'00000bb8 ---------- H'00000bb8
2105 IN UPDATE 2 (DDB) 700 1000 (IGNORED)
H'00000bb8 H'00000bb8 H'00000bb8 H'00000bb8 H'00000bb8 ---------- H'00000bb8
2106 IN UPDATE 2 (TSRC,DDB) 700 1000 (IGNORED)
H'000003e8 H'000003e8 H'000003e8 H'000003e8 H'000003e8 ---------- H'000003e8
2107 CONSISTENT 700 1000
---------- ---------- ---------- ---------- ---------- ---------- ----------
2108 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
2111 NORESP ---------- ----------
---------- ---------- ---------- ---------- ---------- ---------- ----------
2112 NORESP ---------- ----------
Command Completed.
;
rept-stat-ddb
tekelecstp 09-07-21 21:10:32 GMT EAGLE 41.1.0
DDB AUDIT REPORT
SYSTEM STATUS : OK
ACTIVE MTP CARDS : 10
NON RESPONDING CARDS : 0
RESPONDING CARDS : 10
CARDS WITH NO DATA : 0
CARDS WITH DATA : 10
CARDS FAILING QUIET PRD : 0
CARDS WITH DDB UPD IN PRG : 0
CARDS CONSIDERED FOR CKSM : 10
INCONSISTENT CARDS : 0
CONSISTENT CARDS : 0
AUDIT START TIME : 21/07/2009 21:07:54
QUIET PERIOD : 20 ms
Command Completed.
;
rept-stat-ddb:filter=incn
tekelecstp 09-07-21 21:09:32 GMT EAGLE 41.1.0
DDB AUDIT REPORT
SYSTEM STATUS : INCONSISTENT
ACTIVE MTP CARDS : 21
NON RESPONDING CARDS : 7: 1207 1208 1211 1212 2108 2111 2112
RESPONDING CARDS : 14
CARDS WITH NO DATA : 2
CARDS WITH DATA : 12
CARDS FAILING QUIET PRD : 0
CARDS WITH DDB UPD IN PRG : 3
CARDS CONSIDERED FOR CKSM : 9
INCONSISTENT CARDS : 2: 1203 2103
CONSISTENT CARDS : 7
AUDIT START TIME : 21/07/2009 21:07:54
QUIET PERIOD : 600 ms
RTE LINK SET LINK CM CARD CM CLSTR MATED APPL MTP GLOBLS
LOC STATUS CAUSE IDLE DDB UPD ADDN'L STATUS
H'000007d0 H'000007d0 H'000007d0 H'000007d0 H'000007d0 H'000007d0 H'000007d0
1203 INCONSISTENT 700 1000
H'000007d0 H'000007d0 H'000007d0 H'000007d0 H'000007d0 ---------- H'000007d0
2103 INCONSISTENT 700 1000 (WWA UPD=2)
Command Completed.
;
rept-stat-ddb:list=nrsp
tekelecstp 09-07-21 21:07:54 GMT EAGLE 41.1.0
DDB AUDIT REPORT CARD LIST [ NON RESPONDING CARDS ] (6)
1207, 1208, 1211, 1212, 2108, 2111
Command Completed.
;
MTP Cards sending replies marked as "DDB update in progress" are distributed in two rows depending upon the number of times the MTP card consecutively reported "DDB updates in progess". rept-stat-ddb:list=duip
tekelecstp 09-07-21 21:07:54 GMT EAGLE 41.1.0
DDB AUDIT REPORT CARD LIST [ DDB UPDATE IN PROGRESS ] (2)
DDB UPDATES IN PROGRESS (>= 6 TIMES) (0)
DDB UPDATES IN PROGRESS (< 6 TIMES) (2)
1205, 2105
Command Completed.
;
rept-stat-ddb:list=nquiet
tekelecstp 09-07-21 21:07:54 GMT EAGLE 41.1.0
DDB AUDIT REPORT CARD LIST [CARDS WITH NQUIET] (0)
Command Completed.
;
Legend
- SYSTEM STATUS:
- OK—DDB is consistent on all active MTP cards or no active MTP card is present in system
- INCONSISTENT—DDB is inconsistent
- UNKNOWN—"All active MTP cards in the system responded without the checksum of DDB table" or "No active MTP card in the system responded to audit request"
- ABORTED—"Checksums collected failed to meet the quiet period requirement" or "Number of cards responded with "DDB update in progess" greater than 25% number of cards responded with data"
- ACTIVE MTP CARDS—Number of active MTP cards
- NON RESPONDING CARDS—Number of non-responding cards
- RESPONDING CARDS—Number of responding cards
- CARDS WITH NO DATA—Cards sending replies without the checksum of dynamic tables, due to incomplete DDL crossload or DDB initialization
- CARDS WITH DATA—Cards sending replies with checksums
- CARDS FAILING QUIET PRD—Cards failing quiet time requirement
- CARDS WITH DDB UPD IN PRG—Cards sending replies marked as "DDB update in progess" due to DDB checksum not evaluated completely or TSRC task is incomplete
- CARDS CONSIDERED FOR CKSM—Cards sending correct replies. Replies are not marked with "DDB update in progess" or "Reply with no data".
- INCONSISTENT CARDS—Cards that are inconsistent
- CONSISTENT CARDS—Cards that are consistent
- AUDIT START TIME—Time that the audit started (DD/MM/YYYYY hh:ms:ssformat)
- QUIET PERIOD—Minimum DDB idle time, in milliseconds, during which no DDB updates are applied
- RTE—Checksum of RTE Table
- LINK SET—Checksum of Link Set Table
- LINK—Checksum of Link Table
- CM CARD—Checksum of CM Card
- CM CLSTR—Checksum of CM Cluster
- MATED APPL—Checksum of Mated Application
- MTP GLOBLS—Checksum of MTP Globals Table
- IDLE (PERIOD)—Time elapsed, in milliseconds, since the last DDB update was received by this card
- DDB UPD—Total DDB updates received on the card
- ADDN'L STATUS—Display more information for the card, including WWA updates or whether card is considered for audit calculations
- CAUSE—Display the reason for sending replies of type "reply with no data " or "DDB update in progress". This value can be DDL (crossload not completed), DDB (dynamic database is not initialised), (TSRC, DDB) (TSRC task is not completed) or DDB (checksums still needs to apply on tables).
- ?—Card status is not evaluated (inconsistent/consistent) if the system status is marked as "ABORTED"
- IGNORED—Card responded with "DDB update in progess" and is not considered for calculating system status
- WWA UPD—Number of entries that were updated by the WWA