4.401 rept-stat-db

Use this command to display a report showing various status indicators for the active and standby OAM database and the status of the database on each of the network cards.

If the A-Port, AINPQ, Diameter S13/S13' Interface for EIR, EIR, G-Flex, G-Port, INP, LNP ELAP Configuration, Prepaid SMS Intercept Ph1 (PPSMS), SIP NP, or V-Flex feature is turned on, or the ATINP feature is enabled, then the status of the MPS databases and Service Module cards is displayed.

Parameters

db (optional)
Report section or sections to display in the output. The content of each section depends on the specified or default value of the display parameter. MPS output appears only if a feature that uses the MPS is turned on in the system (A-Port, AINPQ, Diameter S13/S13' Interface for EIR, EIR, G-Flex, G-Port, INP, PPSMS, SIP NP, V-Flex, or the LNP ELAP Configuration controlled feature) or the ATINP feature is enabled.
Range:
all
displays database and card output for the STP and MPS report sections
mps
displays database and card output for the MPS report section
stp
displays database and card output for the STP report section
gtt
displays database and card output for the GTT-enabled IPSG card report section
Default:
all
display (optional)

Output type.

Range:
all
Displays operational status of all databases (MASP A, MASP B, and MDAL) and all cards equipped in the database on the system.
brief
Displays operational status of databases in the active and standby MASP and of MPS databases if a feature that uses the MPS is turned on
except
Displays operational status information contained in the display=brief output along with the cards whose database level does not match the active fixed disk current partition or active MPS database
version
Displays the same information that is displayed with the display=all parameter except that the individual database status column is replaced with the database format version and status. Details of the status of the backup databases are displayed for MASP cards. No version information is shown for MPS databases; use the rept-stat-mps command.
Default:
brief
loc (optional)
The card location as stenciled on the shelf of the system.
Range:
1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118, 1113, 1115

Example

rept-stat-db

rept-stat-db:display=all

rept-stat-db:loc=1207

rept-stat-db:db=stp

rept-stat-db:db=gtt

Dependencies

The db and loc parameters cannot be specified at the same time. Also, display=except and display=version cannot be specified with db=gtt.

For E5-OAM cards, values of 1117 and 1118 cannot be specified for the loc parameter.

One of the following features must be turned on, the ATINP feature must be enabled, or at least one ENUM card must be provisioned before the db=mps parameter can be specified:

  • A-Port
  • AINPQ
  • EIR
  • G-Flex
  • G-Port
  • INP
  • LNP ELAP Configuration
  • Prepaid SMS Intercept Ph1
  • SIP NP
  • V-Flex

The shelf and card must be equipped.

The card location slot must be between 1 and 18, but not 9 or 10.

The shelf location must be 11xx, 12xx, 13xx, 21xx, 22xx, 23xx, 31xx, 32xx, 33xx, 41xx, 42xx, 43xx, 51xx, 52xx, 53xx, or 61xx.

The frame value of the shelf location parameter (loc) must be within the valid range.

A valid value must be specified for the display parameter.

Notes

If the display, db, or loc parameter is specified and the database for a particular card location is not accessible, hyphens are displayed in place of the data.

The output of the rept-stat-db command with no parameters specified or with the display=brief parameter shows the following information:

  • Activity status of both the active and standby MASP, the date and time the last backup was performed on the removable drive (if inserted) and the fixed disk backup partition, coherency, the number of updates (level) to the backup partition of the fixed disk, and the current partition of the fixed disk
  • If the A-Port, AINPQ, Diameter S13/S13' Interface for EIR, EIR, G-Flex, G-Port, INP, PPSMS, SIPNP (if used with EPAP), or V-Flex feature is turned on, or the ATINP feature is enabled, EPAP A and EPAP B database status followed by Service Module card database status
  • If the SIP NP (if used with ELAP) or LNP ELAP Configuration controlled feature is turned on, ELAP A and ELAP B database status followed by Service Module card database status
  • If one or more GTT-enabled IPSG cards are configured, the GTT database status for all such cards

The output when the display=except parameter is specified shows the coherency and the number of updates for all the cards whose database level does not match the active fixed disk current partition, reference database level, or is incoherent. All databases that are not accessible are also displayed. In addition, the time stamp for the last database update is displayed for every card.

The output when the display=all parameter is specified shows the coherency and the number of updates for all of the distributed databases. In addition, the time stamp for the last database update is displayed for every card.

The output when the display=version parameter is specified shows the coherency and the number of updates for the active and standby databases, along with the database version and the operational status of each of these databases. If the LNP feature is turned on, the version of the LNP database is shown. No version is shown for EPAP or ELAP databases; use the rept-stat-mps command to display version information for these databases.

The output when the loc parameter specifies an equipped card shows the coherency and the number of updates to its database. In addition, the time stamp for the last database update is displayed for the specific card location.

The db parameter is used to limit the output of the command to the EAGLE STP information or the MPS information or GTT information for an IPSG card. The information is displayed as indicated by the display parameter value (display=version is not valid for db=mps and db=gtt; the command does not display the MPS database versions). The default db parameter value is all, which displays the information for the STP and MPS databases and cards as indicated by the display parameter value.

Output

Note:

Removable drive database information is shown only for the Active OAM slot, whether or not a removable drive is inserted into the standby OAM.

Note:

A status of 'OK' indicates that the database has no errors.

This example shows the output for a specified card. The disk is OFF-LINE indicating the disk has been dismounted. This is not necessarily a problem.

rept-stat-db:loc=1114

    tekelecstp 08-08-29 08:38:25 NZST  EAGLE 39.2.0
    CARD/APPL  LOC   C  T  LEVEL       TIME LAST UPDATE   EXCEPTION
    ---------  ----  -  -  ----------  -----------------  --------------
    TDM-CRNT   1114  -  -      -           -        -     OFF-LINE
    TDM-BKUP   1114  -  -      -           -        -          - 
;

This example shows the output for a specified Service Module card used for EPAP or ELAP. The A-Port, AINPQ, Diameter S13/S13' Interface for EIR, EIR, G-Flex, G-Port, INP, LNP ELAP Configuration, PPSMS, SIP NP, or V-Flex feature is turned on, or the ATINP feature is enabled.

rept-stat-db:loc=1201

    tekelecstp 08-08-29 08:38:25 NZST  EAGLE 39.2.0
    CARD/APPL  LOC   C  T  LEVEL       TIME LAST UPDATE   EXCEPTION
    ---------  ----  -  -  ----------  -----------------  --------------
    VSCCP      1201  Y  N  12          08-05-29 08:53:48       -

                    EAGLE RTDB REPORT
    CARD/APPL  LOC   C  BIRTHDATE          LEVEL       EXCEPTION
    ---------  ----  -  -----------------  ----------  --------------
    VSCCP      1201  Y  08-05-29 16:12:50       12345        - 
;

This example shows the output when the A-Port, AINPQ, Diameter S13/S13' Interface for EIR, EIR, G-Flex, G-Port, INP, LNP ELAP Configuration, PPSMS, SIP NP, and V-Flex features are not turned on, and the ATINP feature is not enabled:

rept-stat-db

    tekelecstp 08-08-29 08:38:25 NZST  EAGLE 39.2.0
    DATABASE STATUS: >> OK <<
            TDM 1114 ( ACTV )                 TDM 1116 ( STDBY)
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    FD BKUP Y       11 08-05-29 08:20:13 NZST Y       11 08-05-29 08:20:13 NZST
    FD CRNT Y       11                        Y       11
            MDAL 1117
            - --------
    RD BKUP Y        1 08-05-29 15:44:20 NZST 
;

This example shows the output when the A-Port, AINPQ, Diameter S13/S13' Interface for EIR, EIR, G-Flex, G-Port, INP, LNP ELAP Configuration, PPSMS, SIP NP, and V-Flex features are not turned on, and the ATINP feature is not enabled:

rept-stat-db:display=all

    tekelecstp 08-08-29 08:39:24 NZST  EAGLE 39.2.0
    DATABASE STATUS: >> OK <<
            TDM 1114 ( ACTV )                 TDM 1116 ( STDBY)
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    FD BKUP Y       11 08-05-29 08:20:13 NZST Y       11 08-05-29 08:20:13 NZST
    FD CRNT Y       11                        Y       11
            MDAL 1117
            - --------
    RD BKUP Y        1 08-05-29 15:44:20 NZST
    CARD/APPL  LOC   C  T  LEVEL       TIME LAST UPDATE   EXCEPTION
    ---------  ----  -  -  ----------  -----------------  --------------
    SS7ANSI    1102  Y  N  11          08-05-29 08:04:00       -
    SS7ANSI    1103  Y  N  11          08-05-29 08:04:00       -
    VSCCP      1105  Y  N  11          08-05-29 08:04:00       -
    TDM-CRNT   1114  Y  N  11          08-05-29 08:04:00       -
    TDM-BKUP   1114  Y  -  11          08-05-29 08:04:00       -
    TDM-CRNT   1116  Y  N  11          08-05-29 08:04:00       -
    TDM-BKUP   1116  Y  -  11          08-05-29 08:04:00       -
    MDAL       1117  Y  -  1           08-05-29 15:06:29  DIFF LEVEL
    VSCCP      1201  Y  N  11          08-05-29 08:04:00       -
    VSCCP      1203  Y  N  11          08-05-29 08:04:00       - 
;

This example shows the output when the A-Port, AINPQ, Diameter S13/S13' Interface for EIR, EIR, G-Flex, G-Port, INP, LNP ELAP Configuration, PPSMS, SIP NP, and V-Flex features are not turned on, and the ATINP feature is not enabled:

Note:

This command does not display version information for MPS databases. Use the rept-stat-mps command to display MPS database version information.
rept-stat-db:display=version

    tekelecstp 08-08-29 08:51:21 NZST  EAGLE 39.2.0
    DATABASE STATUS: >> OK <<
            TDM 1114 ( ACTV )                 TDM 1116 ( STDBY)
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    FD BKUP Y       11 08-05-29 08:20:13 NZST Y       11 08-05-29 08:20:13 NZST
    FD CRNT Y       11                        Y       11
            MDAL 1117
            - --------
    RD BKUP Y        1 08-05-24 15:44:20 NZST 
;

This example shows the output when the LNP feature is turned on:

rept-stat-db:display=version

    tekelecstp 02-10-29 08:51:21 NZST EAGLE 30.0.0
    DATABASE STATUS: >> OK <<
            TDM 1114 ( ACTV )                 TDM 1116 ( STDBY)
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    FD BKUP Y       11 02-10-29 08:20:13 NZST Y       11 02-10-29 08:20:13 NZST
    FD CRNT Y       11                        Y       11
            MDAL 1117
            - --------
    RD BKUP Y        1 02-10-24 15:44:20 NZST
    CARD/APPL  LOC   C  T  LEVEL       TIME LAST UPDATE   VERSION STATUS
    ---------  ----  -  -  ----------  -----------------  -------------------
    TDM-CRNT   1114  Y  N  11          02-10-29 08:04:00  111-000-000  NORMAL
        LNP                                               000-014-000
    TDM-BKUP   1114  Y  -  11          02-10-29 08:04:00  111-000-000  NORMAL
        LNP                                               000-014-000
    TDM-CRNT   1116  Y  N  11          02-10-29 08:04:00  111-000-000  NORMAL
        LNP                                               000-014-000
    TDM-BKUP   1116  Y  -  11          02-10-29 08:04:00  111-000-000  NORMAL
        LNP                                               000-014-000
    MDAL       1117  Y  -  1           02-10-24 15:06:29  114-000-000  NORMAL
        LNP                                               000-014-000 
;

This example shows the output when the A-Port, AINPQ, Diameter S13/S13' Interface for EIR, G-Flex, G-Port, EIR, INP, LNP ELAP Configuration, PPSMS, SIP NP, and V-Flex features are not turned on, and the ATINP feature is not enabled:

rept-stat-db:display=except

    tekelecstp 08-08-29 08:55:54 NZST  EAGLE 39.2.0
    DATABASE STATUS: >> OK <<
            TDM 1114 ( ACTV )                 TDM 1116 ( STDBY)
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    FD BKUP Y       11 08-05-29 08:20:13 NZST Y       11 08-05-29 08:20:13 NZST
    FD CRNT Y       12                        Y       12
            MDAL 1117
            - --------
    RD BKUP Y        1 07-10-24 15:44:20 NZST
    CARD/APPL  LOC   C  T  LEVEL       TIME LAST UPDATE   EXCEPTION
    ---------  ----  -  -  ----------  -----------------  --------------
    SS7ANSI    1103  Y  N  10          08-05-29 08:03:48  DIFF LEVEL
    TDM-BKUP   1114  Y  -  11          08-05-29 08:04:00  DIFF LEVEL
    TDM-BKUP   1116  Y  -  11          08-05-29 08:04:00  DIFF LEVEL
    MDAL       1117  Y  -  1           08-05-24 15:06:29  DIFF LEVEL 
;

This example shows the output when the LNP ELAP Configuration controlled feature is turned on, and ELAP is used:

rept-stat-db

    tekelecstp 02-10-29 08:39:24 NZST EAGLE 30.0.0
    DATABASE STATUS: >> OK <<
            TDM 1114 ( ACTV )                 TDM 1116 ( STDBY)
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    FD BKUP Y       11 02-10-29 08:20:13 NZST Y       11 02-10-29 08:20:13 NZST
    FD CRNT Y       11                        Y       11
            MDAL 1117
            - --------
    RD BKUP Y        1 02-10-24 15:44:20 NZST
                    ELAP A  ( ACTV )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    RTDB             Y  02-10-29 08:20:04       12345        -
    RTDB-EAGLE          02-10-29 08:20:04       12345        -
                    ELAP B ( STDBY )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    RTDB             Y  02-10-29 08:20:04       12345        -
    RTDB-EAGLE          02-10-29 08:20:04       12345        - 
;

This example shows the output when the LNP ELAP Configuration controlled feature is turned on, and ELAP is used:

rept-stat-db:display=all

   tekelecstp 02-10-29 08:39:24 NZST EAGLE 30.0.0
   DATABASE STATUS: >> OK <<
           TDM 1114 ( ACTV )                 TDM 1116 ( STDBY)
           C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
           - -------- ---------------------- - -------- ----------------------
   FD BKUP Y       11 02-10-29 08:20:13 NZST Y       11 02-10-29 08:20:13 NZST
   FD CRNT Y       11                        Y       11
           MDAL 1117
           - --------
   RD BKUP Y        1 02-10-24 15:44:20 NZST
   CARD/APPL  LOC   C  T  LEVEL       TIME LAST UPDATE   EXCEPTION
   ---------  ----  -  -  ----------  -----------------  --------------
   SS7ANSI    1102  Y  N  11          02-10-29 08:04:00       -
   SS7ANSI    1103  Y  N  11          02-10-29 08:04:00       -
   VSCCP      1105  Y  N  11          02-10-29 08:04:00       -
   TDM-CRNT   1114  Y  N  11          02-10-29 08:04:00       -
   TDM-BKUP   1114  Y  -  11          02-10-29 08:04:00       -
   TDM-CRNT   1116  Y  N  11          02-10-29 08:04:00       -
   TDM-BKUP   1116  Y  -  11          02-10-29 08:04:00       -
   MDAL       1117  Y  -  1           02-10-24 15:06:29  DIFF LEVEL
   VSCCP      1201  Y  N  11          02-10-29 08:04:00       -
   VSCCP      1203  Y  N  11          02-10-29 08:04:00       -
                   ELAP A  ( ACTV )
                    C  BIRTHDATE          LEVEL       EXCEPTION
                    -  -----------------  ----------  --------------
   RTDB             Y  02-10-29 08:20:04       12345        -
   RTDB-EAGLE          02-10-29 08:20:04       12345        -
                   ELAP B ( STDBY )
                    C  BIRTHDATE          LEVEL       EXCEPTION
                    -  -----------------  ----------  --------------
   RTDB             Y  02-10-29 08:20:04       12345        -
   RTDB-EAGLE          02-10-29 08:20:04       12345        -

                   EAGLE RTDB REPORT
   CARD/APPL  LOC   C  BIRTHDATE          LEVEL       EXCEPTION
   ---------  ----  -  -----------------  ----------  --------------
   VSCCP      1201  Y  02-10-29 08:20:04       12345        -
   VSCCP      1203  Y  02-10-29 08:20:04       12345        -
   VSCCP      1105  Y  02-10-29 08:20:04       12345        - 
;

This example shows the output when the LNP ELAP Configuration controlled feature is turned on, and ELAP is used.

rept-stat-db:display=except

    tekelecstp 02-10-29 08:55:54 NZST EAGLE 30.0.0
    DATABASE STATUS: >> OK <<
            TDM 1114 ( ACTV )                 TDM 1116 ( STDBY)
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    FD BKUP Y       11 02-10-29 08:20:13 NZST Y       11 02-10-29 08:20:13 NZST
    FD CRNT Y       12                        Y       12
            MDAL 1117
            - --------
    RD BKUP Y        1 02-10-24 15:44:20 NZST
    CARD/APPL  LOC   C  T  LEVEL       TIME LAST UPDATE   EXCEPTION
    ---------  ----  -  -  ----------  -----------------  --------------
    SS7ANSI    1103  Y  N  10          02-10-29 08:03:48  DIFF LEVEL
    TDM-BKUP   1114  Y  -  11          02-10-29 08:04:00  DIFF LEVEL
    TDM-BKUP   1116  Y  -  11          02-10-29 08:04:00  DIFF LEVEL
    MDAL       1117  Y  -  1           02-10-24 15:06:29  DIFF LEVEL

                  ELAP A  ( ACTV )
                    C  BIRTHDATE          LEVEL       EXCEPTION
                    -  -----------------  ----------  --------------
   RTDB             Y  02-10-29 08:20:04       12345        -
   RTDB-EAGLE       Y  02-10-29 08:20:04       12345        -
  
                  ELAP B ( STDBY )
                    C  BIRTHDATE          LEVEL       EXCEPTION
                    -  -----------------  ----------  --------------
   RTDB             Y  02-10-29 08:20:04       12345        -
   RTDB-EAGLE       Y  02-10-29 08:20:04       12345        -

                   EAGLE RTDB REPORT
   CARD/APPL  LOC   C  BIRTHDATE          LEVEL       EXCEPTION
   ---------  ----  -  -----------------  ----------  --------------
   VSCCP      1203  Y  02-10-29 08:20:04       12340  DIFF LEVEL 
;

This example shows the output when the A-Port, AINPQ, Diameter S13/S13' Interface for EIR, G-Flex, G-Port, EIR, INP, PPSMS, SIP NP, or V-Flex feature is turned on, or the ATINP feature is enabled, and EPAP is used:

rept-stat-db

tekelecstp 16-09-01 12:44:22 EST   EAGLE 46.5.0.0.0-70.4.0
    DATABASE STATUS: >> OK <<
            TDM 1114 ( ACTV )                 TDM 1116 ( STDBY)
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    FD BKUP Y       11 16-09-01 12:44:22 EST  Y       11 16-09-01 12:44:22 EST 
    FD CRNT Y       11                        Y       11   
    GTT     Y     5651                        Y     5651
            - --------                        - --------
    RD BKUP Y        1 16-09-01 12:44:22 EST  
;

This example shows the output when the A-Port, AINPQ, Diameter S13/S13' Interface for EIR, EIR, G-Flex, G-Port, INP, PPSMS, SIP NP, or V-Flex feature is turned on, or the ATINP feature is enabled, and EPAP is used:

rept-stat-db:display=all:db=stp

   tekelecstp 16-09-01 12:44:22 EST   EAGLE 46.5.0.0.0-70.4.0
    DATABASE STATUS: >> OK <<
            TDM 1114 ( ACTV )                 TDM 1116 ( STDBY)
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    FD BKUP Y       11 16-09-01 12:44:22 EST  Y       11 16-09-01 12:44:22 EST
    FD CRNT Y       11                        Y       11    
    GTT     Y     5651                        Y     5651
            - --------                        - --------
    RD BKUP Y        1 16-09-01 12:44:22 EST    
    CARD/APPL  LOC   C  T  LEVEL       TIME LAST UPDATE   EXCEPTION
    ---------  ----  -  -  ----------  -----------------  --------------
    SS7ANSI    1102  Y  N  11          16-09-01 12:44:22        -
    SS7ANSI    1103  Y  N  11          16-09-01 12:44:22        -
    VSCCP      1105  Y  N  11          16-09-01 12:44:22        -
    TDM-CRNT   1114  Y  N  11          16-09-01 12:44:22        -
    TDM-BKUP   1114  Y  -  11          16-09-01 12:44:22        -
    TDM-CRNT   1116  Y  N  11          16-09-01 12:44:22        -
    TDM-BKUP   1116  Y  -  11          16-09-01 12:44:22        -
    VSCCP      1201  Y  N  11          16-09-01 12:44:22        -
    VSCCP      1203  Y  N  11          16-09-01 12:44:22        -  
;

This example shows the output when the A-Port, AINPQ, Diameter S13/S13' Interface for EIR, EIR, G-Flex, G-Port, INP, PPSMS, SIP NP, or V-Flex feature is turned on, or the ATINP feature is enabled, and EPAP is used:

rept-stat-db:display=except

    tekelecstp 08-08-29 08:55:54 NZST  EAGLE 39.2.0
    DATABASE STATUS: >> OK <<
            TDM 1114 ( ACTV )                 TDM 1116 ( STDBY)
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    FD BKUP Y       11 08-05-29 08:20:13 NZST Y       11 08-05-29 08:20:13 NZST
    FD CRNT Y       12                        Y       12
            MDAL 1117
            - --------
    RD BKUP Y        1 02-10-24 15:44:20 NZST
    CARD/APPL  LOC   C  T  LEVEL       TIME LAST UPDATE   EXCEPTION
    ---------  ----  -  -  ----------  -----------------  --------------
    SS7ANSI    1103  Y  N  10          08-05-29 08:03:48  DIFF LEVEL
    TDM-BKUP   1114  Y  -  11          08-05-29 08:04:00  DIFF LEVEL
    TDM-BKUP   1116  Y  -  11          08-05-29 08:04:00  DIFF LEVEL
    MDAL       1117  Y  -  1           08-05-29 15:06:29  DIFF LEVEL
                   EPAP A  ( ACTV )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    PDB              Y  08-05-29 08:20:04       12345        -
    RTDB             Y  08-05-29 08:20:04       12345        -
    RTDB-EAGLE       Y  08-05-29 08:20:04       12345        -
                    EPAP B ( STDBY )
                    C  BIRTHDATE          LEVEL       EXCEPTION
                    -  -----------------  ----------  --------------
   PDB              Y  08-05-29 08:20:04       12345        -
   RTDB             Y  08-05-29 08:20:04       12345        -
   RTDB-EAGLE       Y  08-05-29 08:20:04       12345        -
                   EAGLE RTDB REPORT
   CARD/APPL  LOC   C  BIRTHDATE          LEVEL       EXCEPTION
   ---------  ----  -  -----------------  ----------  --------------
   VSCCP      1203  Y  08-05-29 08:20:04       12340  DIFF LEVEL 
;

This example shows the output when the A-Port, AINPQ, Diameter S13/S13' Interface for EIR, G-Flex, G-Port, EIR, INP, LNP ELAP Configuration, PPSMS, SIPNP, and V-Flex features are not turned on, and the ATINP feature is not enabled:

rept-stat-db:db=stp

    tekelecstp 08-08-29 08:39:24 NZST  EAGLE 39.2.0
    DATABASE STATUS: >> OK <<
            TDM 1114 ( ACTV )                 TDM 1116 ( STDBY)
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    FD BKUP Y       11 08-05-29 08:20:13 NZST Y       11 08-05-29 08:20:13 NZST
    FD CRNT Y       11                        Y       11
            MDAL 1117
            - --------
    RD BKUP Y        1 08-05-29 15:44:20 NZST 
;

This example shows the output when the A-Port, AINPQ, Diameter S13/S13' Interface for EIR, EIR, G-Flex, G-Port, INP, LNP ELAP Configuration, PPSMS, SIP NP, and V-Flex features are not turned on, and the ATINP feature is not enabled:

rept-stat-db:display=all:db=stp

    tekelecstp 08-08-29 08:39:24 NZST  EAGLE 39.2.0
    DATABASE STATUS: >> OK <<
            TDM 1114 ( ACTV )                 TDM 1116 ( STDBY)
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    FD BKUP Y       11 07-08-29 08:20:13 NZST Y       11 07-08-29 08:20:13 NZST
    FD CRNT Y       11                        Y       11
            MDAL 1117
            - --------
    RD BKUP Y        1 02-10-24 15:44:20 NZST
    CARD/APPL  LOC   C  T  LEVEL       TIME LAST UPDATE   EXCEPTION
    ---------  ----  -  -  ----------  -----------------  --------------
    SS7ANSI    1102  Y  N  11          07-08-29 08:04:00       -
    SS7ANSI    1103  Y  N  11          07-08-29 08:04:00       -
    VSCCP      1105  Y  N  11          07-08-29 08:04:00       -
    TDM-CRNT   1114  Y  N  11          07-08-29 08:04:00       -
    TDM-BKUP   1114  Y  -  11          07-08-29 08:04:00       -
    TDM-CRNT   1116  Y  N  11          07-08-29 08:04:00       -
    TDM-BKUP   1116  Y  -  11          07-08-29 08:04:00       -
    MDAL       1117  Y  -  1           07-08-24 15:06:29  DIFF LEVEL
    VSCCP      1201  Y  N  11          07-08-29 08:04:00       -
    VSCCP      1203  Y  N  11          07-08-29 08:04:00       - 
;

This example shows the output when the A-Port, AINPQ, Diameter S13/S13' Interface for EIR, G-Flex, G-Port, EIR, INP, LNP ELAP Configuration, PPSMS, SIP NP, and V-Flex features are not turned on and the ATINP feature is not enabled:

rept-stat-db:display=except:db=stp

    tekelecstp 08-08-29 08:55:54 NZST  EAGLE 39.2.0
    DATABASE STATUS: >> OK <<
            TDM 1114 ( ACTV )                 TDM 1116 ( STDBY)
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    FD BKUP Y       11 08-05-29 08:20:13 NZST Y       11 08-05-29 08:20:13 NZST
    FD CRNT Y       12                        Y       12
            MDAL 1117
            - --------
    RD BKUP Y        1 08-05-24 15:44:20 NZST
    CARD/APPL  LOC   C  T  LEVEL       TIME LAST UPDATE   EXCEPTION
    ---------  ----  -  -  ----------  -----------------  --------------
    SS7ANSI    1103  Y  N  10          08-05-29 08:03:48  DIFF LEVEL
    TDM-BKUP   1114  Y  -  11          08-05-29 08:04:00  DIFF LEVEL
    TDM-BKUP   1116  Y  -  11          08-05-29 08:04:00  DIFF LEVEL
    MDAL       1117  Y  -  1           08-05-29 15:06:29  DIFF LEVEL 
;

This example shows the output when the LNP ELAP Configuration controlled feature is turned on, and ELAP is used:

rept-stat-db:db=mps

    tekelecstp 02-10-29 08:55:54 NZST EAGLE 30.0.0
                    ELAP A  ( ACTV )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    RTDB             Y  02-10-29 08:20:04       12345        -
    RTDB-EAGLE          02-10-29 08:20:04       12345        -
                    ELAP B ( STDBY )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    RTDB             Y  02-10-29 08:20:04       12345        -
    RTDB-EAGLE          02-10-29 08:20:04       12345        - 
;

This example shows the output when the LNP ELAP Configuration feature is turned on, and ELAP is used. Card 1203 indicates a value 12 in the exception column. The value indicates the number of times that the Corruption Cross Correction function has corrected the card during the time that the card has been in service. More specifically, the card has encountered 12 corrupted records and has subsequently repaired them. This value persists until the card is reset.

rept-stat-db:display=all:db=mps

    tekelecstp 02-10-29 08:55:54 NZST EAGLE 31.6.0
                   ELAP A  ( ACTV )
                    C  BIRTHDATE          LEVEL       EXCEPTION
                    -  -----------------  ----------  --------------
    RTDB             Y  02-10-29 08:20:04       12345        -
    RTDB-EAGLE          02-10-29 08:20:04       12345        -

                   ELAP B ( STDBY )
                    C  BIRTHDATE          LEVEL       EXCEPTION
                    -  -----------------  ----------  --------------
    RTDB             Y  02-10-29 08:20:04       12345        -
    RTDB-EAGLE          02-10-29 08:20:04       12345        -
                    EAGLE RTDB REPORT
    CARD/APPL  LOC   C  BIRTHDATE          LEVEL       EXCEPTION    IN-SRVC
    ---------  ----  -  -----------------  ----------  ------------ -----------
    VSCCP      1201  Y  02-10-29 08:20:04       12345        -      10d 23h 21m
    VSCCP      1203  Y  02-10-29 08:20:04       12345        12     10d 23h 21m
    VSCCP      1105  Y  02-10-29 08:20:04       12345        -       5d  3h  1m
    VSCCP      1201  Y  02-10-29 08:20:04       12345        -
    VSCCP      1203  Y  02-10-29 08:20:04       12345        -
    VSCCP      1105  Y  02-10-29 08:20:04       12345        - 
; 
;

This example shows the output when the LNP ELAP Configuration feature is turned on, and ELAP is used:

rept-stat-db:display=except:db=mps

    tekelecstp 02-10-29 08:55:54 NZST EAGLE 31.6.0
                  ELAP A  ( ACTV )
                    C  BIRTHDATE          LEVEL       EXCEPTION
                    -  -----------------  ----------  --------------
   RTDB             Y  02-10-29 08:20:04       12345        -
   RTDB-EAGLE       Y  02-10-29 08:20:04       12345        -

                   ELAP B ( STDBY )
                    C  BIRTHDATE          LEVEL       EXCEPTION
                    -  -----------------  ----------  --------------
   RTDB             Y  02-10-29 08:20:04       12345        -
   RTDB-EAGLE       Y  02-10-29 08:20:04       12345        -

                    EAGLE RTDB REPORT
    CARD/APPL  LOC   C  BIRTHDATE          LEVEL       EXCEPTION    IN-SRVC
    ---------  ----  -  -----------------  ----------  ------------ -----------
    VSCCP      1203  Y  02-10-29 08:20:04       12340  DIFF LEVEL   10d 23h 21m 
;

This example shows the output when the A-Port, AINPQ, Diameter S13/S13' Interface for EIR, G-Flex, G-Port, EIR, INP, PPSMS, SIP NP, or V-Flex feature is turned on, or the ATINP feature is enabled, and EPAP is used:

rept-stat-db:db=mps

    tekelecstp 08-08-29 08:55:54 NZST  EAGLE 39.2.0
                    EPAP A  ( ACTV )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    PDB              Y  08-05-29 08:20:04       12345        -
    RTDB             Y  08-05-29 08:20:04       12345        -
    RTDB-EAGLE       Y  08-05-29 08:20:04       12345        -
                    EPAP B ( STDBY )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    PDB              Y  08-05-29 08:20:04       12345        -
    RTDB             Y  08-05-29 08:20:04       12345        -
    RTDB-EAGLE       Y  08-05-29 08:20:04       12345        - 
;

This example shows the output when the A-Port, AINPQ, Diameter S13/S13' Interface for EIR, EIR, G-Flex, G-Port, EIR, INP, PPSMS, SIP NP, or V-Flex feature is turned on, or the ATINP feature is enabled, and EPAP is used:

rept-stat-db:display=all:db=mps

    tekelecstp 08-05-29 08:55:54 NZST  EAGLE 39.2.0
                    EPAP A  ( ACTV )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    PDB              Y  07-08-29 08:20:04       12345        -
    RTDB             Y  07-08-29 08:20:04       12345        -
    RTDB-EAGLE       Y  07-08-29 08:20:04       12345        -

                    EPAP B ( STDBY )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    PDB              Y  07-08-29 08:20:04       12345        -
    RTDB             Y  07-08-29 08:20:04       12345        -
    RTDB-EAGLE       Y  07-08-29 08:20:04       12345        -
 
                    EAGLE RTDB REPORT
    CARD/APPL  LOC   C  BIRTHDATE          LEVEL       EXCEPTION    IN-SRVC
    ---------  ----  -  -----------------  ----------  ------------ -----------
    VSCCP      1201  Y  07-08-29 08:20:04        12345        -      10d 23h 21m
    VSCCP      1203  Y  07-08-29 08:20:04        12345        -      10d 23h 21m
    VSCCP      1105  Y  07-08-29 08:20:04        12345        -       5d  3h  1m 
;

This example shows the output when the A-Port, AINPQ, Diameter S13/S13' Interface for EIR, EIR, G-Flex, G-Port, INP, PPSMS, SIP NP, or V-Flex feature is turned on, or the ATINP feature is enabled, and EPAP is used:

rept-stat-db:display=except:db=mps

    tekelecstp 08-08-29 08:55:54 NZST  EAGLE 39.2.0
                   EPAP A  ( ACTV )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    PDB              Y  07-08-29 08:20:04       12345        -
    RTDB             Y  07-08-29 08:20:04       12345        -
    RTDB-EAGLE       Y  07-08-29 08:20:04       12345        -

                    EPAP B ( STDBY )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    PDB              Y  07-08-29 08:20:04       12345        -
    RTDB             Y  07-08-29 08:20:04       12345        -
    RTDB-EAGLE       Y  07-08-29 08:20:04       12345        -

                     EAGLE RTDB REPORT
    CARD/APPL  LOC   C  BIRTHDATE          LEVEL       EXCEPTION    IN-SRVC
    ---------  ----  -  -----------------  ----------  ------------ -----------
    VSCCP      1203  Y  07-08-29 08:20:04       12340  DIFF LEVEL   10d 23h 21m 
;

This example shows the output when E5-MCAP and E5-TDM cards are used:

rept-stat-db

    e5oam 08-12-01 15:25:40 EST  EAGLE 40.1.0
    DATABASE STATUS: >> OK <<
            TDM 1114 ( STDBY)                 TDM 1116 ( ACTV )
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    FD BKUP Y       36 08-11-19 09:38:25 EST  Y       36 08-11-19 09:38:25 EST
    FD CRNT Y       39                        Y       39
            MCAP 1113                         MCAP 1115
            - --------                        - --------
    RD BKUP Y       36 08-11-19 09:27:17 EST  Y       36 08-11-19 09:27:17 EST
    USB BKP -    -         -        -         Y        3 08-11-07 01:11:22 EST 
;
rept-stat-db:display=all

    e5oam 08-12-01 15:26:27 EST  EAGLE 40.1.0
    DATABASE STATUS: >> OK <<
            TDM 1114 ( STDBY)                 TDM 1116 ( ACTV )
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    FD BKUP Y       36 08-11-19 09:38:25 EST  Y       36 08-11-19 09:38:25 EST
    FD CRNT Y       39                        Y       39
            MCAP 1113                         MCAP 1115
            - --------                        - --------
    RD BKUP Y       36 08-11-19 09:27:17 EST  Y       36 08-11-19 09:27:17 EST
    USB BKP -    -         -        -         -    -         -        -

    CARD/APPL  LOC   C  T  LEVEL       TIME LAST UPDATE   EXCEPTION
    ---------  ----  -  -  ----------  -----------------  --------------
    MCP        1108  -  -      -           -        -          -
    IPS        1111  Y  N  39          08-11-22 10:21:54       -
    OAM-RMV    1113  Y  -  36          08-11-18 23:36:19  DIFF LEVEL
    TDM-CRNT   1114  Y  N  39          08-11-22 10:21:54       -
    TDM-BKUP   1114  Y  -  36          08-11-18 23:36:38  DIFF LEVEL
    OAM-RMV    1115  Y  -  36          08-11-18 23:36:19  DIFF LEVEL
    OAM-USB    1115  Y  -   3          08-11-07 01:11:22  DIFF LEVEL
    TDM-CRNT   1116  Y  N  39          08-11-22 10:21:54       -
    TDM-BKUP   1116  Y  -  36          08-11-18 23:36:38  DIFF LEVEL

The examples show output when the Dual ExAP Config feature is enabled and both LNP and EPAP base features are turned ON:

rept-stat-db

    exap 12-07-03 09:31:29 MST  EAGLE 45.0.0-64.34.0
    DATABASE STATUS: >> OK <<
            TDM 1114 ( STDBY)                 TDM 1116 ( ACTV )
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    FD BKUP Y        1     -        -         Y        1     -        -
    FD CRNT Y       79                        Y       79
            MCAP 1113                         MCAP 1115
            - --------                        - --------
    RD BKUP Y        1     -        -         Y        1     -        -
    USB BKP -    -         -        -         -    -         -        -

                    ELAP A ( STDBY )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    RTDB             Y  11-08-01 13:50:00           6        -
    RTDB-EAGLE          11-08-01 13:50:00           6        -

                    ELAP B  ( ACTV )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    RTDB             Y  11-08-01 13:50:00           6        -
    RTDB-EAGLE          11-08-01 13:50:00           6        -

                    EPAP A ( STDBY )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    PDB                 09-06-12 12:09:46   104552913        -
    RTDB             Y  09-06-12 12:09:46   104552913        -
    RTDB-EAGLE          09-06-12 12:15:06   104552913        -

                    EPAP B  ( ACTV )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    PDB                 09-06-12 12:09:46   104552913        -
    RTDB             Y  09-06-12 12:09:46   104552913        -
    RTDB-EAGLE          09-06-12 12:15:06   104552913        -

; 
rept-stat-db:display=all
 
    exap 12-07-03 09:35:32 MST  EAGLE 45.0.0-64.34.0
    DATABASE STATUS: >> OK <<
            TDM 1114 ( STDBY)                 TDM 1116 ( ACTV )
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    FD BKUP Y        1     -        -         Y        1     -        -
    FD CRNT Y       79                        Y       79
            MCAP 1113                         MCAP 1115
            - --------                        - --------
    RD BKUP Y        1     -        -         Y        1     -        -
    USB BKP -    -         -        -         -    -         -        -

    CARD/APPL  LOC   C  T  LEVEL       TIME LAST UPDATE   EXCEPTION
    ---------  ----  -  -  ----------  -----------------  --------------
    VSCCP      1101  Y  N  79          12-07-02 11:10:56       -
    VSCCP      1103  Y  N  79          12-07-02 11:10:56       -
    IPS        1105  Y  N  79          12-07-02 11:10:56       -
    SS7ANSI    1107  Y  N  79          12-07-02 11:10:56       -
    IPSG       1108  -  -      -           -        -          -
    VSCCP      1111  Y  N  79          12-07-02 11:10:56       -
    OAM-RMV    1113  Y  -  1               -        -     DIFF LEVEL
    TDM-CRNT   1114  Y  N  79          12-07-02 11:10:56       -
    TDM-BKUP   1114  Y  -  1           00-00-00 00:00:00  DIFF LEVEL
    OAM-RMV    1115  Y  -  1               -        -     DIFF LEVEL
    OAM-USB    1115  -  -      -           -        -          -
    TDM-CRNT   1116  Y  N  79          12-07-02 11:10:56       -
    TDM-BKUP   1116  Y  -  1           00-00-00 00:00:00  DIFF LEVEL
    VSCCP      1201  -  -      -           -        -          -
    CCS7ITU    1203  -  -      -           -        -          -
    VSCCP      1205  -  -      -           -        -          -

                    ELAP A ( STDBY )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    RTDB             Y  11-08-01 13:50:00           6        -
    RTDB-EAGLE          11-08-01 13:50:00           6        -

                    ELAP B  ( ACTV )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    RTDB             Y  11-08-01 13:50:00           6        -
    RTDB-EAGLE          11-08-01 13:50:00           6        -

                    EPAP A ( STDBY )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    PDB                 09-06-12 12:09:46   104552913        -
    RTDB             Y  09-06-12 12:09:46   104552913        -
    RTDB-EAGLE          09-06-12 12:15:06   104552913        -

                    EPAP B  ( ACTV )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    PDB                 09-06-12 12:09:46   104552913        -
    RTDB             Y  09-06-12 12:09:46   104552913        -
    RTDB-EAGLE          09-06-12 12:15:06   104552913        -

                    EAGLE RTDB REPORT
    CARD/APPL  LOC   C  BIRTHDATE          LEVEL       EXCEPTION    IN-SRVC
    ---------  ----  -  -----------------  ----------  ------------ -----------
    VSCCP      1101  Y  11-08-01 17:50:00           6        -       7d 16h 33m
    VSCCP      1111  Y  09-06-12 12:15:06   104552913        -       4d 18h 27m

;
rept-stat-db:db=mps
    exap 12-07-03 09:36:17 MST  EAGLE 45.0.0-64.34.0
                    ELAP A ( STDBY )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    RTDB             Y  11-08-01 13:50:00           6        -
    RTDB-EAGLE          11-08-01 13:50:00           6        -

                    ELAP B  ( ACTV )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    RTDB             Y  11-08-01 13:50:00           6        -
    RTDB-EAGLE          11-08-01 13:50:00           6        -

                    EPAP A ( STDBY )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    PDB                 09-06-12 12:09:46   104552913        -
    RTDB             Y  09-06-12 12:09:46   104552913        -
    RTDB-EAGLE          09-06-12 12:15:06   104552913        -

                    EPAP B  ( ACTV )
                     C  BIRTHDATE          LEVEL       EXCEPTION
                     -  -----------------  ----------  --------------
    PDB                 09-06-12 12:09:46   104552913        -
    RTDB             Y  09-06-12 12:09:46   104552913        -
    RTDB-EAGLE          09-06-12 12:15:06   104552913        -

;

The examples shows the GTT DB level on ACTIVE and STANDBY MASP when there is some GTT data available on the OAMs:

rept-stat-db:db=gtt
tekelecstp 16-08-25 02:57:00 EST   EAGLE 46.5.0.0.0-70.4.0
    rept-stat-db:db=gtt
    Command entered at terminal #23.
;
Command Accepted - Processing
    tekelecstp 16-08-25 02:57:00 EST   EAGLE 46.5.0.0.0-70.4.0
    DATABASE STATUS: >> OK <<
            TDM 1114 ( ACTV )                 TDM 1116 ( STDBY )
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    GTT     Y     5651 16-08-25 02:57:00      Y     5651 16-08-25 02:57:00

The examples shows the GTT DB level on ACTIVE and STANDBY MASP when there is no GTT data on the OAMs:

rept-stat-db:db=gtt
tekelecstp 16-08-25 02:57:00 EST   EAGLE 46.5.0.0.0-70.4.0
    rept-stat-db:db=gtt
    Command entered at terminal #23.
;
Command Accepted - Processing
    tekelecstp 16-08-25 02:57:00 EST   EAGLE 46.5.0.0.0-70.4.0
    DATABASE STATUS: >> OK <<
            TDM 1114 ( ACTV )                 TDM 1116 ( STDBY )
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    GTT     Y     5651 16-08-25 02:57:00      Y     5651 16-08-25 02:57:00

This example shows the GTT DB level on ACTIVE and STANDBY MASP and also on all GTT enabled IPSG cards, irrespective of their state.

rept-stat-db:db=gtt:display=all
tekelecstp 16-08-25 02:57:00 EST   EAGLE 46.5.0.0.0-70.4.0
    rept-stat-db:db=gtt:display=all
    Command entered at terminal #22.
;
Command Accepted - Processing
    tekelecstp 16-08-25 02:57:00 EST   EAGLE 46.5.0.0.0-70.4.0
    DATABASE STATUS: >> OK <<
            TDM 1114 ( ACTV )                 TDM 1116 ( STDBY )
            C   LEVEL    TIME LAST BACKUP     C   LEVEL    TIME LAST BACKUP
            - -------- ---------------------- - -------- ----------------------
    GTT     Y     5651 16-08-25 02:57:00      Y     5651 16-08-25 02:57:00

    CARD/APPL  LOC   C  T  LEVEL       TIME LAST UPDATE   EXCEPTION
    ---------  ----  -  -  ----------  -----------------  --------------
    IPSG       1102  -  -      -           -        -          -
    IPSG       1105  Y  N  5651        16-08-25 02:59:30       -
    IPSG       1106  Y  N  5651        16-08-25 02:59:35       -
    IPSG       1108  -  -      -           -        -          -
;
Command Executed

This example shows that with db=gtt, only two values of DISPLAY parameter are supported viz., ALL and BRIEF. This command will give an appropriate error message when display=except or display=version is specified with db=gtt.

rept-stat-db:display=except:db=gtt
tekelecstp 16-11-28 16:00:19 MST  EAGLE 46.5.0.0.0-70.7.0
    rept-stat-db:display=except:db=gtt
    Command entered at terminal #23.
;

E2155 Cmd Rej: Invalid parameter combination specified


> rept-stat-db:display=version:db=gtt

    tekelecstp 16-11-28 16:06:31 MST  EAGLE 46.5.0.0.0-70.7.0
    rept-stat-db:display=version:db=gtt
    Command entered at terminal #23.
;

E2155 Cmd Rej: Invalid parameter combination specified

Legend

  • DATABASE STATUS—Indicates any database alarms on the MASPs. Not used with loc parameter output.
    • >> OK<<—No database alarms
    • >>NOT OK (DMS)<<—Database DMS alarms are present
    • >>NOT OK (DRMS)<<—Database DRMS alarms are present
    • >>NOT OK (DMS,DRMS)<<—Database DMS and DRMS alarms are present
  • (ACTV MASP)—The specified MASP is the active processor. Not used with loc parameter.
  • (STDBY MASP)—The specified MASP is the standby processor. Not used with loc parameter.
  • (NOACCS)—The specified processor is not accessible. Not used with loc parameter.
  • C—Indicates whether the database is coherent
  • Y —the database is coherent
  • N —the database is not coherent
  • Dash ( - )—the database is not accessible
  • LEVEL—Number of updates made to the database partitions
  • TIME LAST BACKUP—Date and time the last change was performed on the removable drives (if inserted) and the backup partition of the fixed disk. Not used with loc parameter.
  • TIME LAST UPDATE—Date and time of the last update on the card database from OAM. Not used with loc parameter.
  • GTT—The Global Title Translation database on the OAM. This database is downloaded to Service Module and GTT enabled IPSG cards. If the birthdate or level do not match the SM/GTT enabled IPSG card, then the corresponding card generates an alarm.
  • RD BKUP—Removable drive backup partition
  • FD BKUP—Fixed disk backup partition
  • FD CRNT—Fixed disk current partition. Not used with the loc parameter output.
  • DIFF CONTENTS—The specified database’s contents are different compared to the other database in that partition.
  • DIFF LEVEL—The specified database’s level does not match the level of the current partition of the active fixed disk (FD CRNT).
  • DIFF TIME—The specified database’s level matches the level of the current partition of the active fixed disk (FD CRNT), but the time that the database was updated, compared to the current partition of the active fixed disk (FD CRNT), is different. This exception indicator appears only if the time and date stamp in an update packet or in memory becomes corrupted.
  • CORRUPTED—The specified database is corrupted.
  • INCOHERENT—The specified database is incoherent.
  • EXCEPTION—The following values can appear:
    • The condition of the specified database with which the system has detected a problem. These conditions are: DIFF CONTENTS, DIFF LEVEL, DIFF TIME, CORRUPTED, and INCOHERENT. A “-” indicates that the database was not accessible. A blank entry indicates that the database has no problems. This field is used with the display=except, display=all, and loc parameter outputs.
    • A value that indicates the number of times that the Corruption Cross Correction function has corrected the card during the time that the card has been in service. This value persists until the card is reset.
  • IN-SRVC—Length of time the card has been in service
  • CARD/APPL—Card type or application assigned to the card specified in the LOC field. Not used with the display=brief (default) output.
    • TDM-BKUP—Backup partition on the fixed disk on the TDM
    • TDM-CRNT—Current partition on the fixed disk on the TDM
  • LOC—Card location of the database. Not used with display=brief (default) output.
  • T—Indicates whether the specified database is in transition. A database is in transition when the database for the link interface module (LIM) or E5-TSM being loaded with the new screen set information after an update to the database, and the database has not reached the current reported database level. Not used with display=brief (default) output.
  • Y—the database is in transition
  • N—the database is not in transition.
  • TIME LAST BACKUP—The date and time the last change was performed on the specified card and its associated database. A dash (–) in this field for the fixed drive (FD) or removable drive (RD) indicates that no backup has been created on that drive. Not used with display=brief (default) output.
  • VERSION—Version number of each database (including the LNP database if the LNP feature is on)
    • xxx-xxx-xxx—Version number of the database
    • UNKNOWN—The rept-stat-db command can show the version number only for a database that is version 20.0.0 or later. Any database version that is earlier than version 20.0.0 cannot be determined and UNKNOWN is displayed for the database version number.
    • A dash “-”—The database is not available. Used only with
    display=version output.
  • STATUS—Operational status of the database version. Used only with display=version output.
    • NORMAL—The database version is fully operational.
    • Blank entry—Indicates the database is not available or is unknown. A numeric value indicates the database is invalid. The value displayed is the status value found in the field and is for diagnostic purposes.
  • BIRTHDATE—Date and time of creation for the database
  • EPAP A (ACTV)—The active EAGLE Application Processor. This section appears only if the A-Port, AINPQ, Diameter S13/S13' Interface for EIR, G-Port, G-Flex, EIR, INP, PPSMS, SIP NP (if used with EPAP), or V-Flex features are turned on or the ATINP feature is enabled.
    • PDB—Provisioning database status information
    • RTDB—Provisioning database status information used to create the resident Realtime Database. The RTDB information may be different than the PDB information if the PDB has been reloaded, or if the RTDB has not been loaded from the PDB. If the RTDB birthdate is different than the PDB or if the level is too old to be able to resynchronize the databases, then a "Reload Required" alarm is generated.
    • RTDB-EAGLE—EPAP resident Realtime Database status information. This database is downloaded to Service Module cards. If the birthdate or level do not match the Service Module card, then the Service Module card generates an alarm. The RTDB is reloaded from the PDB, and the birthdate and level are reset and do not match the database status information. This database status mismatch condition indicates an abnormal condition that requires Service Module cards to be reloaded.
  • EPAP B (STDBY)—The standby EAGLE Application Processor. This section appears only if the A-Port, AINPQ, Diameter S13/S13' Interface for EIR, G-Port, G-Flex, EIR, INP, PPSMS, SIP NP (if used with EPAP), or V-Flex features are turned on, or the ATINP feature is enabled.
    • PDB—Provisioning database status information
    • RTDB—The provisioning database status information used to create the resident Realtime Database. The RTDB information may be different than the PDB information if the PDB has been reloaded, or if the RTDB has not been loaded from the PDB. If the RTDB birthdate is different than the PDB or if the level is too old to be able to resynchronize the databases, then a "Reload Required" alarm is generated.
    • RTDB-EAGLE—EPAP resident Realtime Database status information. This database is downloaded to Service Module cards. If the birthdate or level do not match the Service Module card, then the Service Module card generates an alarm. The RTDB is reloaded from the PDB, and the birthdate and level are reset and do not match the database status information. This database status mismatch condition indicates an abnormal condition that requires Service Module cards to be reloaded.
  • ELAP A (ACTV)—The active EAGLE LNP Application Processor. This section appears only if the LNP ELAP Configuration or SIP NP (if used with ELAP) feature is turned on.
    • RTDB-EAGLE—ELAP resident Database status information. This database is downloaded to Service Module cards. If the birthdate or level do not match the Service Module card, then the Service Module card generates an alarm.
    • TIME LAST UPDATE—Date and time of the last update of the RTDB from the LSMS
  • ELAP B (STDBY)—The standby EAGLE LNP Application Processor. This section appears only if the LNP ELAP Configuration or SIP NP (if used with ELAP) feature is turned on.
    • RTDB-EAGLE—The ELAP resident Realtime Database status information. This database is downloaded to Service Module cards. If the birthdate or level do not match the Service Module card, then the Service Module card generates an alarm.
    • TIME LAST UPDATE—Date and time of the last update of the RTDB from the LSMS