4.46 chg-csl
Use this command to change an existing entry in the Common Screening List (CSL). The Common Screening List commands are used to tailor certain types of general screening information to specific features.
Parameters
- ds (optional)
- Digit string. A unique string of digits used by the specified screening feature
- Range:
- 1 - 15 hexadecimal digits.
Valid digits are 0-9, a-f, A-F
- 1-6 digits—Prepaid IDP Query Relay ccnc list
- 1-15 digits—Prepaid IDP Query Relay gt list
- 1-10 digits—Prepaid IDP Query Relay skbcsm list
- 4 digits—IDP Screening for Prepaid skts list
- 1-15 digits—IDP Screening for Prepaid insl list
- 1-15 digits—VFLEX vmpfx list
- 1-6 digits—Info Analyzed Relay Base ccnc list
- 1-15 digits—Info Analyzed Relay Base gt list
- 2 digits—Info Analyzed Relay Base trig list
- 1-15 digits — EIR imsipfx list
Table 4-23 lists valid hexadecimal values for the Info Analyzed Relay Base trig list ds entries.
- feature (optional)
- Feature name. The name of the enabled screening feature for which the command is entered.
Note:
The pn or feature parameter must be specified to identify the feature.- Range:
- azzzzzzzzzzzzzzzzzzzzzzzz
1 alphabetic character followed by up to 24 optional alphanumeric characters, including spaces and special characters, enclosed in double quotation marks (" ").
Enter enough of the feature name to make the name unique if two features begin with the same word or acronym. The following feature names are valid for this command:
- EIR
- IDP Screening for Prepaid
- IDP Service Key Routing
- Info Analyzed Relay Base
- Prepaid IDP Query Relay
- SIP Number Portability
- VFLEX
- list (optional)
- Common Screening List associated with the feature.
- Range:
-
- ccnc
- CC+NC List
- delpfx
- Delete Prefix List
- gt
- Global Title List
- imsipfx
- IMSI Screening Prefix List
- insl
- In Network Subscriber List
- npbypass
- SIP NPBYPASS list
- skbcsm
- SK+BCSM List
- skts
- SK+TS List
- trig
- Trigger List
- vmpfx
- Voice Mail Prefix LIst
The following screening lists are valid for the indicated features:
- ccnc, gt— Prepaid IDP Query Relay, Info Analyzed Relay Base
- imsipfx— EIR
Note:
If list argument is not specified in this command for EIR feature then list = imsipfx by default is taken. - npbypass— SIP Number Portability
- skbcsm—Prepaid IDP Query Relay and IDP Service Key Routing
- skts, insl—IDP Screening for Prepaid
- trig—Info Analyzed Relay Base
- vmpfx—VFLEX
The delpfx list is not supported at this time. This list should only be used by Oracle personnel.
- p1 (optional)
- Parameter Value 1. This parameter is specific to the feature and list that use the parameter.
- Range:
- zzzzzzzzzz
Valid values for the IDP Service Key Routing feature are:
- 3 or prepaid1—Prepaid Portability Type 3 for the SKBCSM list
- 4 or prepaid2—Prepaid Portability Type 4 for the SKBCSM list
- 6-35 or prepaid3-prepaid32—Prepaid Portability Types 6 through 35 for the SKBCSM list
- 255 or prepaidno—No Prepaid Portability Type for the SKBCSM list
Valid values for EIR feature are:- 1 or range— Check only range IMEI table for the IMSIPFX list
- 2 or individual — Check only individual IMEI table for the IMSIPFX list
- 3 or both --- Check individual IMEI table first and then range table for the IMSIPFX list
- 4 or none --- No check in either Individual IMEI Table or Range IMEI Table for the IMSIPFX list.
Valid values for the Prepaid IDP Query Relay feature are:
- 0, 1—National or International for the DELPFX list, which is for Tekelec personnel use ONLY.
Note:
The p1 parameter is used by the IDP Service Key Routing feature or EIR feature.
- p2 (optional)
- Parameter Value 2. The IDP Relay Service that is associated with an SKBCSM list DS entry. Multiple IDP Relay Services can be provisioned for use with NPP or Response Type for EIR feature that is associated with an imsipfx list DS Entry.
- p3 (optional)
- Parameter Value 3. The IDP Relay Service that is associated with
a GT list DS entry. Multiple IDP Relay Services can be provisioned for use
with NPP or Response Type for the parameter value that can be entered as a
number or as the corresponding mnemonic.
- Range:
- zzzzzzzzzz
- Default:
-
Default value is idprcdpn.
Valid values for Prepaid IDP Query Relay features are:
- 1 or idprcdpn—IDPRCDPN Service for the GT list
- 2 or idprcdpn2—IDPRCDPN2 Service for the GT list
- 3 or idprcdpn3—IDPRCDPN3 Service for the GT list
- 4 or idprcdpn4—IDPRCDPN4 Service for the GT list
Note:
The P3 parameter can only be used when MERGE_IN is ON in TTROPTS Table
- pc (optional)
- ANSI point code with subfields network indicator-network cluster-network cluster member (ni-nc-ncm).
- pc/pca/pci/pcn/pcn24 (optional)
- Point code. The ds parameter or a point code parameter must be specified.
Note:
See Point Code Formats and Conversion for a detailed description of point code formats, rules for specification, and example.
- pcn (optional)
- ITU national destination point code in the format of a 5-digit number (nnnnn); or 2, 3, or 4 numbers (members) separated by dashes (m1-m2-m3-m4) as defined by the
chg-stpopts:npcfmtiflexible point code option. A group code must be specified when the ITUDUPPC feature is turned on (nnnnn-gc, m1-m2-m3-m4-gc).
- pcn24 (optional)
- 24-bit ITU national point code with subfields main signaling area-sub signaling area-signaling point (msa-ssa-sp).
- pfxstrip (optional)
- This parameter in NPBYPASS list indicates whether matched prefix must be deleted or not.
- pn (optional)
- Part Number. The 9-digit "893xxxxxx" part number of the feature for which the command is entered. The
rtrv-ctrl-featcommand description shows the part number in the command output example.Note:
The pn or feature parameter must be specified to identify the feature.- Range:
- 893000000 - 893999999 The first 3 digits are 893. Do not separate the digits with dashes or spaces. The following part numbers are valid for this command:
- 893012301 --- EIR
- 893015501—IDP Screening for Prepaid
- 893016001—Prepaid IDP Query Relay
- 893016701—VFLEX
- 893034201—Info Analyzed Relay Base
- 893040601— SIP Number Portability
Example
chg-csl:feature="IDP Screening for Prepaid":list=insl:ds=123456789bcdEF
chg-csl:feature="VFLEX":list=vmpfx:ds=123456789abcdEF
chg-csl:feature="Prepaid IDP Query Relay":list=skbcsm:ds=0000000056:p2=idprcdpn4:scpgta=abce9875
chg-csl:pn=893040601:list=npbypass:ds=0000046:pfxstrip=yes
chg-csl:feature="SIP NUMBER PORTABILITY":list=npbypass:ds=000036:pfxstrip=no
chg-csl:feature="EIR":list=imsipfx:ds=401134134:p1=range:p2=whitelist
chg-csl:feature="Prepaid IDP Query Relay":list=gt:ds=123456789bcdec:p3=idprcdpn2
Dependencies
An enabled feature must be specified using a valid part number (pn) or feature name (feature). The specified feature must use a Common Screening List.
The feature that is specified by the feature parameter must already be enabled.
The list parameter must be specified for features that use more than one type of screening list.
The value specified for the list parameter must be valid for the specified screening feature.
The specified screening list entry must exist in the screening list that is used by the feature.
The length of the digit string that is specified for the ds parameter must be valid for the screening feature and list type.
A valid ds parameter value is required for the specified feature and list type.
The following parameters are allowed with the indicated common screening list type:
- list=gt—ds parameter
- list=ccnc—ds parameter
- list=skbcsm—ds and scpgta parameters
- list=skts—ds parameter
- list=insl—ds parameter
- list=vmpfx—ds parameter
- list=trig—ds parameter
- list=imsipfx--- ds parameter
The leading digit pattern of the value specified for the ds parameter must be unique in the specified screening list for the indicated feature.
The Common Screening List table is corrupt or cannot be found.
The pc or ds parameter must be specified. The parameters cannot be specified together in the command.
The value specified for the feature parameter must be valid feature name for a feature that uses a Common Screening List. The feature name must be specified as it appears in the rtrv-ctrl-feat command output. Enough of the name must be specified to make the name unique when two features begin with the same word or acronym.
The scpgta and pc parameters cannot be specified together in the command.
If the scpgta parameter is specified, then the ds parameter must be specified.
A valid p1 and p2 parameter value is required for the specified feature and list type.
The SIPNP feature must be enabled before changing NP prefix entries for the NPBYPASS list.
PFXSTRIP must be changed when the list specified is NPBYPASS with the SIPNP Feature.
The DS (Digit String) must be between 1 - 15 digits in length for SIPNP Feature
The p3 parameter can be displayed and changed only when MERGE_IN parameter in TTROPTS Table is ON.
3677 E3677 Cmd Rej: MERGE_IN should be ON to use P3
Notes
None
Output
chg-csl:pn="Prepaid IDP Query Relay":list=skbcsm:ds=0000000056:p2=idprcdpn4:scpgta=abce9875
tekelecstp 10-10-20 14:46:49 EST EAGLE 43.0.0
SK+BCSM List ( 7 of 150) 5%
CHG-CSL: MASP A - COMPLTD
;
chg-csl:feature="SIP Number Portability":list=npbypass:ds=0000000034:pfxstrip=yes
tekelecstp 12-06-25 15:29:14 EST EAGLE 45.0.0
chg-csl:feature="SIP Number Portability":list=npbypass:ds=0000000034:pfxstrip=yes
Command entered at terminal #4.
PFX List ( 2 of 1000) 1%
CHG-CSL: MASP A- COMPLTD
;chg-csl:pn=893040601:list=npbypass:ds=0000000056:pfxstrip=yes
tekelecstp 12-06-025 15:29:14 EST EAGLE 45.0.0
chg-csl:pn=893040601:list=npbypass:ds=0000000056:pfxstrip=yes
Command entered at terminal #4.
PFX List (3 or 1000) 1%
CHG-CSL: MASP A-COMPLTD
;