4.285 ent-csl
Use this command to enter new screening data into the Common Screening List (CSL). The Common Screening List commands are used to tailor certain types of general screening information to specific features.
Parameters
- ds (optional)
- Digit string. A unique string of digits that is
used by the specified screening feature.
- Range:
-
1-15 hexadecimal digits.
Valid digits are 0-9, a-f, A-F.
- 1-6 digits—Prepaid IDP Query Relay ccnc list
- 1-15 digits—Prepaid IDP Query Relay gt list
- 1-10 digits—Prepaid IDP Query Relay skbcsm list
- 4 digits—IDP Screening for Prepaid skts list
- 1-15 digits—IDP Screening for Prepaid insl list
- 1-15 digits—VFLEX vmpfx list
- 1-6 digits—Info Analyzed Relay Base ccnc list
- 1-15 digits—Info Analyzed Relay Base gt list
- 2 digits—Info Analyzed Relay Base trig list
- 1-15 digits — EIR imsipfx list
Table 4-23 lists valid hexadecimal values for the Info Analyzed Relay Base trig list ds entries.
- feature (optional)
- Feature name. The name of the enabled feature for
which the command is entered.
Note:
The pn or feature parameter must be specified to identify the feature.- Range:
-
ayyyyyyyyyyyyyyyyyyyyyyyy
1 alphabetic character followed by up to 24 optional alphanumeric characters, including spaces and special characters, enclosed in double quotation marks (" ").
- EIR
- IDP Screening for Prepaid
- IDP Service Key Routing
- Info Analyzed Relay Base
- Prepaid IDP Query Relay
- VFLEX
- list (optional)
- The name of the Common Screening List associated
with the feature.
Note:
This parameter must be specified when the feature uses more than one type of Common Screening List.- Range:
-
- ccnc
- CC+NC List
- delpfx
- Delete Prefix List
- gt
- Global Title List
- imsipfx
- IMSI Screening Prefix List
- insl
- In Network Subscriber List
- npbypass
- SIP NPBYPASS List
- skbcsm
- SK+BCSM List
- skts
- SK+TS List
- trig
- Trigger List
- vmpfx
- Voice Mail Prefix List
- opcdpc
- OPC + DPC List
The following screening lists are valid for the indicated features:
- ccnc, gt—Prepaid IDP Query Relay and Info Analyzed Relay Base
- imsipfx ---EIR
Note:
If the list argument is not specified in this command, then list=imsipfx by default is taken. - skbcsm—Prepaid IDP Query Relay and IDP Service Key Routing
- skts, insl—IDP Screening for Prepaid
- trig—Info Analyzed Relay Base
- vmpfx—VFLEX
- opcdpc—Prepaid IDP Query Relay
The delpfx list is not supported at this time. This list should only be used by Oracle personnel.
- dpci(optional)
- ITU international destination point code with subfields
zone-area-id.
The
prefix
subfield indicates a spare point code (prefix-zone-area-id).
Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).
prefix-s
zone-0-7
area-000-255
id-0-7
The point code 0-000-0 is not a valid point code.
- dpcn(optional)
- ITU national destination point code in the format of a 5-digit
number (nnnnn); or 2, 3,
or 4 numbers (members) separated by dashes (m1-m2-m3-m4) as defined by
the chg-stpopts:npcfmti flexible point code option. A group code must be
specified when the ITUDUPPC feature is turned on (nnnnn-gc,m1-m2-m3-m4-gc). The
prefix
subfield indicates a spare point code (prefix-nnnnn,
prefix-nnnnn-gc,
prefix-m1-m2-m3-m4,
prefix-m1-m2-m3-m4-gc).
Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).
prefix-s-
nnnnn-0-16383
gc-aa-zz
m1-m2-m3-m4-0-14 for each member; values must sum to 14
- dpcn24(optional)
- 24-bit ITU national destination point code with subfields
main signaling
area-sub signaling area-signaling point (msa-ssa-sp).
Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).
msa-000-255
ssa-000-255
sp-000-255
- dpcn16(optional)
- 16-bit ITU national point code with subfields
unit number sub
number area main number area (un-sna-mna).
Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).
un---000---127
sna---000---15
mna---000---31
- opci(optional)
- ITU international destination point code with subfields
zone-area-id.
The
prefix
subfield indicates a spare point code (prefix-zone-area-id).
Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).
prefix-s
zone-0-7
area-000-255
id-0-7
The point code 0-000-0 is not a valid point code.
- opcn(optional)
- New ITU national originating point code in the format of a
5-digit number (nnnnn);
or 2, 3, or 4 numbers (members) separated by dashes (m1-m2-m3-m4) as defined by
the chg-stpopts:npcfmti flexible point code option. A group code must be
specified when the ITUDUPPC feature is turned on (nnnnn-gc,
m1-m2-m3-m4-gc). The
prefix
subfield indicates a spare point code (prefix-nnnnn,
prefix-nnnnn-gc,
prefix-m1-m2-m3-m4,
prefix-m1-m2-m3-m4-gc).
Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).
prefix-s-
nnnnn-0-16383
gc-aa-zz
m1-m2-m3-m4-0-14 for each member; values must sum to 14.
- opcn24(optional)
- 24-bit ITU national originating point code with subfields
main signaling
area-sub signaling area-signaling point (msa-ssa-sp).
Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).
msa-000-255
ssa-000-255
sp-000-255
- opcn16(optional)
-
- opcn24(optional)
- 16-bit ITU national point code with subfields
unit number
sub number area main number area (un-sna-mna).
Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).
un---000---127
sna---000---15
mna---000---31
Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).
msa-000-255
ssa-000-255
sp-000-255
- p1 (optional)
- Parameter Value 1. This parameter is specific to
the feature and list that use the parameter.
Valid values for the IDP Service Key Routing feature are:
- 3 or prepaid1—Prepaid Portability Type 3 for the SKBCSM list
- 4 or prepaid2—Prepaid Portability Type 4 for the SKBCSM list
- 6-35 or prepaid3-prepaid32—Prepaid Portability Types 6 through 35 for the SKBCSM list
- 255 or prepaidno—No Prepaid Portability Type for the SKBCSM list
Valid values for the EIR feature are:- 1 or range - Check only Range IMEI Table for the IMSIPFX list
- 2 or individual - Check only Individual IMEI Table for the IMSIPFX list
- 3 or both - Check Individual IMEI Table then Range IMEI Table for the IMSIPFX list
- 4 or none - No check in either Individual or Range IMEI Table for the IMSIPFX list
Valid values for the Prepaid IDP Query Relay feature are:
- 0, 1—National or International for the DELPFX list, which is for Oracle personnel use ONLY.
Note:
The p1 parameter is used by the IDP Service Key Routing feature or the EIR feature.
- p2 (optional)
- Parameter Value 2. The IDP Relay Service that is
associated with an SKBCSM list DS entry. Multiple IDP Relay Services can be
provisioned for use with NPP or Response Type for EIR feature that is
associated with an
imsipfx list DS Entry. This
value can be entered as a number or as a mnemonic.
- Range:
- zzzzzzzzzz
Valid values for the Prepaid IDP Query Relay feature are:
1 or idprcdpn —IDPRCDPN Service for the SKBCSM list
2 or idprcdpn2 —IDPRCDPN2 Service for the SKBCSM list
3 or idprcdpn3 —IDPRCDPN3 Service for the SKBCSM list
4 or idprcdpn4 —IDPRCDPN4 Service for the SKBCSM list
Valid values for the EIR feature are:
1 or whitelist - Response Type as Whitelist for imsipfx list.
2 or graylist - Response Type as Graylist for imsipfx list.
3 or blacklist - Response Type as Blacklist for imsipfx list.
4 or unknown - Response Type as Unknown for imsipfx list.
Note:
The p2 parameter is used by the Prepaid IDP Query Relay feature or the EIR feature.
- p3 (optional)
- Parameter Value 3. The IDP Relay Service that is associated with a GT list DS
entry. Multiple IDP Relay Services can be provisioned for use with NPP or
Response Type for EIR feature that is associated with an
imsipfx list DS Entry. This value can be entered as
a number or as a mnemonic.
- Default:
- P3 by default is idprcdpn
- Range:
-
zzzzzzzzzzValid values for Prepaid IDP Query Relay features are:
- 1 or idprcdpn—IDPRCDPN Service for the GT list
- 2 or idprcdpn2—IDPRCDPN2 Service for the GT list
- 3 or idprcdpn3—IDPRCDPN3 Service for the GT list
- 4 or idprcdpn4—IDPRCDPN4 Service for the GT list
- pc (optional)
- ANSI point code with subfields
network
indicator-network cluster-network cluster member (ni-nc-ncm).
Note:
See Point Code Formats and Conversion for a detailed description of point code formats, rules for specification, and examples.- Synonym:
- pca
- Range:
- 000-255
Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).
When
chg-sid:pctype=ansi
is specified, ni = 000 is not valid.When
chg-sid:pctype=ansi
is specified, nc = 000 is not valid if ni = 001–005.When
chg-sid:pctype=ansi
is specified, nc = 000 is valid if ni = 006–255.The point code 000-000-000 is not a valid point code.
- pcn (optional)
- ITU national destination point code in the format
of a 5-digit number (nnnnn); or 2, 3, or 4
numbers (members) separated by dashes (m1-m2-m3-m4) as defined by
the
chg-stpopts:npcfmti
flexible point code option. A group code must be specified when the ITUDUPPC feature is turned on (nnnnn-gc, m1-m2-m3-m4-gc).
- pcn24 (optional)
- 24-bit ITU national point code with subfields main signaling area-sub signaling area-signaling point (msa-ssa-sp).
- pfxstrip (optional)
- This parameter in NPBYPASS list indicates whether matched prefix must be deleted or not.
- pn (optional)
- Part number. The 9-digit "893xxxxxx" part number
of the feature for which the command is entered. The
rtrv-ctrl-feat
command description shows the part number in the command output example.Note:
The pn or feature parameter must be specified to identify the feature.
Example
ent-csl:feature=”Prepaid IDP Query Relay”:list=ccnc:ds=123456
ent-csl:pn=893015001:list=insl:ds=123456789bcdEF
ent-csl:feature="Prepaid IDP Query Relay":list=skbcsm:ds=0000000056:p2=idprcdpn2:scpgta=896589
ent-csl:feature="EIR":list=imsipfx:ds=401134134:p1=range:p2=whitelist
ent-csl:pn=893016001:list=opcdpc:dpci=4-5-6
ent-csl:pn=893016001:list=opcdpc:dpci=4-5-6:opci=2-3-4
Dependencies
An enabled feature must be specified using either a valid part number (pn parameter) or feature name (feature parameter). The specified feature must use a Common Screening List.
The feature that is specified in the feature parameter must be enabled.
The list parameter must be specified for features that use more than one type of screening list.
The value specified for the list parameter must be valid for the specified screening feature.
The length of the digit string specified for the ds parameter must be valid for the screening feature and list type.
A valid ds parameter value is required for the specified feature and list type.
The following parameters are allowed with the indicated common screening list type:
- list=gt — ds parameter
- list=ccnc — ds parameter
- list=imsipfx---ds parameter
- list=insl--- ds parameter
- list=skbcsm — ds and scpgta parameters
- list=skts — ds parameter
- list=trig — ds parameter
- list=vmpfx — ds parameter
The leading digit pattern of the value specified for the ds parameter must be unique in the specified screening list for the indicated feature.
The Common Screening List table is corrupt or cannot be found.
Each list table is allowed to contain a maximum number of entries:
- IDP Screening for Prepaid
- INSL —50 entries
- SKTS—25 entries
- Prepaid IDP Query Relay
- CCNC —20 entries
- GT—500 entries
- SKBCSM—150 entries
- VFLEX
- VMPFX—100 entries
- Info Analyzed Relay Base
- CCNC—20 entries
- GT—500 entries
- TRIG—150 entries
- EIR
- IMSIPFX — 100000 entries
The pc or ds parameter must be specified in the command. The parameters cannot be specified together in the command.
The value specified for the feature parameter must be a
valid feature name for a feature that uses a Common Screening List. The feature
name must be specified as it appears in the
rtrv-ctrl-feat
command output. Enough
of the name must be specified to make the name unique when two features begin
with the same word or acronym.
The value specified for the ds parameter must be unique in the specified screening list for the indicated feature.
The scpgta and pc parameters cannot be specified together in the command.
If the scpgta parameter is specified, then the ds parameter must be specified.
A valid p1 and p2 parameter value is required for the specified feature and list type.
P3 parameter can only be entered when mergein is on in TTROPTS.
3677 E3677 Cmd Rej: MERGE_IN should be ON to use P3
If list type opcdpc given, then p1, p2, p3, ds, scpgta and pc parameters cannot be specified.
For IDPR service, if list type opcdpc given, then opc/dpc parameter must be specified and the types for the OPC and DPC must match.
Notes
Table 4-23 TRIGTYPE Hexadecimal Codes
Hex | Decimal | Mnemonic | Hex | Decimal | Mnemonic |
---|---|---|---|---|---|
00 |
0 |
Unspecified |
1A |
26 |
Inter-LATA_ Toll_Call. |
01 |
1 |
All_Calls. |
1B |
27 |
World_Zone_ Call. |
02 |
2 |
Double_ Introducing _Star. |
1C |
28 |
International_ Call. |
03 |
3 |
Single_ Introducing_ Star. |
1D |
29 |
Unrecognized_ Number. |
04 |
4 |
Reserved |
1E |
30 |
Prior_ Agreement. |
05 |
5 |
Double_ Introducing_ Pound. |
1F |
31 |
Specific_ Called_Party_ Digit_String |
06 |
6 |
Single_ Introducing_ Pound. |
20 |
32 |
Mobile_ Termination |
07 |
7 |
Revertive_ Call. |
21 |
33 |
Advanced_ Termination |
08 |
8 |
0_Digit. |
22 |
34 |
Location |
09 |
9 |
1_Digit. |
23 |
35 |
Locally_Allowed _Specific_Digit_ String |
0A |
10 |
2_Digit. |
24 |
36 |
Orgination_ Atempt_ Authorized. |
0B |
11 |
3_Digit. |
25 |
37 |
Calling_ Routing_ Address _Available. |
0C |
12 |
4_Digit. |
26 |
38 |
Initial_ Termination |
0D |
13 |
5_Digit. |
27 |
39 |
Called_ Routing_ Address_ Available |
0E |
14 |
6_Digit. |
29 |
40 |
O_Answer. |
0F |
15 |
7_Digit. |
29 |
41 |
O_Disconnect. |
10 |
16 |
8_Digit. |
2A |
42 |
O_Called_ Party_Busy. |
11 |
17 |
9_Digit. |
2B |
43 |
O_No_Answer. |
12 |
18 |
10_Digit. |
40 |
64 |
Terminating_ Resource_ Available |
13 |
19 |
11_Digit. |
41 |
65 |
T_Busy. |
14 |
20 |
12_Digit. |
42 |
66 |
T_No_Answer. |
15 |
21 |
13_Digit. |
43 |
67 |
T_No_Page_ Response. |
16 |
22 |
14_Digit. |
44 |
68 |
T_Unroutable. |
17 |
23 |
15_Digit. |
45 |
69 |
T_Answer. |
18 |
24 |
Local_Call. |
46 |
70 |
T_Disconnect. |
19 |
25 |
Intra-LATA _Toll_Call. |
Output
ent-csl:feature="VFLEX":list=vmpfx:ds=123456789abcdEF
tekelecstp 08-05-22 13:53:59 EST EAGLE 39.0.0
VM Prefix List table is (1 of 100) 1% full
ENT-CSL: MASP A - COMPLTD
;
ent-csl:pn=893040601:list=npbypass:ds=0000000012:pfxstrip=yes
tekelecstp 12-06-25 15:29:14 EST EAGLE 45.0.0
ent-csl:pn=893040601:list=npbypass:ds=0000000012:pfxstrip=yes
Command entered at terminal #4.
PFX List (2 of 1000) 1%
ENT-CSL: MASP A - COMPLTD
;
ent-csl:feature="EIR":list=imsipfx:ds=4444444441:p1=range:p2=whitelist
tekelecstp 20-02-09 02:52:23 EST EAGLE 46.9.0.0.0
ent-csl:feature="eir":list=imsipfx:ds=4444444441:p1=range:p2=whitelist
Command entered at terminal #4.
PFX List ( 5 of 100000) 1%
ENT-CSL: MASP A - COMPLTD;
Related Topics