chg-netopts

Use this command to change the Private Virtual Network (PVN) address and PVN subnet mask values for the IP networks and the network address and subnet mask values for the Fast Copy networks used by the system.

Caution:

Ensure that the configured addresses do not conflict with the DHCP IP addresses leased to STC cards (see the mode=full report generated by the rept-stat-card command). Conflicting IP addresses can adversely affect the EAGLE 5 Integrated Monitoring Support feature.

Parameters

fcna (optional)

Fast Copy Network A. The network address for the Fast Copy A network.

Note:

This parameter consists of a classless Inter Domain Routing (Supernet) address with a network prefix of up to 23 bits.

Range:: 0.0.2.0-255.255.253.0
The last 9 bits are zero (0) and are reserved for the Host ID.
Default:: No change to the current value
System Default:: 172.21.48.00

fcnb (optional)

Fast Copy Network B. The network address for the Fast Copy B network.

Note:

This parameter consists of a classless Inter Domain Routing (Supernet) address with a network prefix of up to 23 bits.

Range:: 0.0.2.0-255.255.253.0
The last 9 bits are zero (0) and are reserved for the Host ID.
Default:: No change to the current value
System Default:: 172.22.48.00

pvn (optional)

Private Virtual Network address for the EAGLE. The value must be valid for a Class B network IP address. The host portion of the PVN address must be 0 based on the PVNMASK.

Range:: 128.0.0.0-191.255.255.0
4 numbers separated by dots in the range 128.0.0.0 - 191.255.255.0
Default:: No change to the current value
System Default:: 172.20.48.00

pvnmask (optional)

A subnet mask for the EAGLE PVN.

Range:

The value must be valid for a Class B network IP address

255.255.0.0
255.255.128.0
255.255.192.0
255.255.224.0
255.255.240.0
255.255.248.0
255.255.252.0
255.255.254.0
255.255.255.0

Default:

No change to the current value

System Default:

255.255.252.00

Example

chg-netopts:pvn=170.120.50.1:pvnmask=255.255.252.0

chg-netopts:fcna=170.120.50.0

chg-netopts:fcnb=172.121.50.0

Dependencies

At least one pair of optional parameters must be specified in the command (i.e. pvn and pvnmask or fcna and fcnb).

The pvn and pvnmask IP addresses cannot have the same value.

The NETOPTS table is corrupt or cannot be found.

The pvn and pvnmask parameters must be specified together in the command.

The IP network address specified by the pvn/pvnmask or fcna/fcnb parameters cannot be the same as, overlap, or include any IP network or host addresses assigned to any Ethernet interface for any IP card.

The IP Network address specified by the pvn and pvnmask parameters or the fcna and fcnb parameters cannot have an existing route in the IP Route table.

The E5IS feature must be turned on before this command can be specified.

The value specified for the fcna parameter must be a classless Inter Domain Routing (Supernet) address with a 23-bit network prefix.

The value specified for the fcnb parameter must be a classless Inter Domain Routing (Supernet) address with a 23-bit network prefix.

If the fcmode=fcopy parameter is specified (see the chg-eisopts command) for an IPSG or IPGHC GPL, then the fcna and fcnb parameters cannot be specified.

The eiscopy=off parameter must be specified (see the chg-eisopts command) before the pvn or pvnmask parameter can be specified.

The same value cannot be specified for the pvn, fcna, and fcnb parameters.

The same value cannot be specified for the fcna and fcnamask parameters.

The same value cannot be specified for the fcnb and fcnbmask parameters.

The value specified for the pvn parameter must be a valid Class B network IP address.

The host portion of the value specified for the pvn parameter must be 0.0.0.0 based on the value specified for the pvnmask parameter.

The value specified for the pvnmask parameter must be a valid subnet IP address.

Notes

Fast Copy Cards

E5-ENET-B cards running the IPSG or IPGHC GPL are considered to be FC- capable. A card running the IPGHC GPL must be in the IS-NR State before the card can be considered FC- capable. This restriction does not apply to cards running the IPSG GPL. An FC- capable card is considered FC- enabled when Fast Copy monitoring is enabled for the respective GPL.

Output

chg-netopts:fcna=170.120.50.0


    tekelecstp 10-12-09 16:00:29 EST  EAGLE 43.0.0
    chg-netopts:fcna=170.120.50.0
    Command entered at terminal #4.
    CAUTION: Ensure that configured PVN/FCNA/FCNB addresses do not conflict
    with the DHCP IP addresses leased to STC cards.

    CHG-NETOPTS: MASP A - COMPLTD 
;

4.106 chg-netopts