4.105 chg-mtc-measopts

Use this command to enable or disable the automatic generation and FTP transfer of scheduled maintenance measurements reports to the FTP server.

Parameters

Note:

As of Release 46.6, the mtcdaiq, mtcdatinpq, mtcdeir, mtcdgttapath, mtcdgttset, mtcdlink, mtcdlnkset, mtcdlnp, mtcdmap, mtcdnp, mtcdsctpasoc, mtcdsctpcard, mtcdsip, mtcdstp, mtcdua, mtcdvflex, mtchaiq, mtchatinpq, mtcheir, mtchgttapath, mtchgttset, mtchlnp, mtchmap, mtchnp, mtchvflex, mtcddeir, mtchdeir and mtcdsfthrot parameters can be specified individually or as options for the on and off parameters.

Note:

The options for the on and off parameters are specified in the Notes section.
mtcdaiq (optional)
Activates or deactivates the automatic generation and FTP transfer of the scheduled daily maintenance measurement report for ANSI41 AnalyzedInformation Query (ANSI41 AIQ).
Range:
on
off
Default:
No change to the current value.
System Default:
off
mtcdatinpq (optional)
Activates or deactivates the automatic generation and FTP transfer of the scheduled daily maintenance measurement report for ATI Number Portability Query (ATINP).
Range:
on
off
Default:
No change to the current value
System Default:
off
mtcdeir (optional)
Activates or deactivates the automatic generation and FTP transfer of the daily maintainenance measurement reports for Equipment Identity Register (EIR).
Range:
on
off
Default:
No change to the current value
System Default:
off
mtcdenum (optional)
Activates or deactivates the automatic generation and FTP transfer of the daily ENUM NP maintenance measurement reports.
Range:
on
off
Default:
No change to the current value
System Default:
off
mtcdgttapath (optional)
Activates or deactivates the automatic generation and FTP transfer of the scheduled daily maintenance measurement report for GTT Action per path measurements.
Range:
on
off
Default:
No change to the current value
System Default:
off
mtcdgttset (optional)
Activates or deactivates the automatic generation and FTP transfer of the scheduled daily per GTTSET maintenance measurement report.
Range:
on
off
Default:
No change to the current value
System Default:
off
mtcdlink (optional)
Activates or deactivates the automatic generation and FTP transfer of the daily maintenance measurement report for links.
Range:
on
off
Default:
No change to the current value
System Default:
off
mtcdlnkset (optional)
Activates or deactivates the automatic generation and FTP transfer of the daily maintenance measurement report for link sets.
Range:
on
off
Default:
No change to the current value
System Default:
off
mtcdlnp (optional)
Activates or deactivates the automatic generation and FTP transfer of the scheduled daily maintenance measurement report for LNP.
Range:
on
off
Default:
No change to the current value
System Default:
off
mtcdmap (optional)
Activates or deactivates the automatic generation and FTP transfer of the scheduled daily maintenance measurement report per GSM MAP Screening server entry.
Range:
on
off
Default:
No change to the current value
System Default:
off
mtcdnp (optional)
Activates or deactivates the automatic generation and FTP transfer of the scheduled daily maintenance measurement report for INP.
Range:
on
off
Default:
No change to the current value
System Default:
off
mtcdsctpasoc (optional)
Activates or deactivates the automatic generation and FTP transfer of the scheduled daily maintenance measurement report for per association SCTP data.
Range:
on
off
Default:
No change to the current value
mtcdsctpcard (optional)
Activates or deactivates the automatic generation and FTP transfer of the scheduled daily maintenance measurement report for per card SCTP data.
Range:
on
off
Default:
No change to the current value
mtcdsfthrot (optional)
Activates or deactivates the automatic generation and FTP transfer of the scheduled daily maintenance measurement report for GTT SFTHROT Action measurements.
Range:
on
off
Default:
No change to the current value
System Default:
off
mtcdsip (optional)
Activates or deactivates the automatic generation and FTP transfer of the daily maintenance measurement report for SIP.
Range:
on
off
Default:
No change to the current value
System Default:
off
mtcdstp (optional)
Activates or deactivates the automatic generation and FTP transfer of the daily maintenance measurement report for STP.
Range:
on
off
Default:
No change to the current value
System Default:
off
mtcdua (optional)
Activates or deactivates the automatic generation and FTP transfer of the scheduled daily maintenance measurement report for M3UA and SUA application server/association pairs.
Range:
on
off
Default:
No change to the current value
System Default:
off
mtcdvflex (optional)
Activates or deactivates the automatic generation and FTP transfer of the daily maintenance measurement report for V-Flex (Voice Mail Router). 
Range:
on
off
Default:
No change to the current value
System Default:
off
mtchaiq (optional)
Activates or deactivates the automatic generation and FTP transfer of the scheduled hourly maintenance measurement report of ANSI41 AnalyzedInformation Query (ANSI41 AIQ).
Range:
on
off
Default:
No change to the current value.
System Default:
off
mtchatinpq (optional)
Activates or deactivates the automatic generation and FTP transfer of the scheduled hourly maintenance measurement report of Any Time Interrogation (ATI) Number Portability (NP) Queries.
Range:
on
off
Default:
No change to the current value
System Default:
off
mtchdeir (optional)
Activates or deativates the automatic generation and FTP transfer of the hourly S13 EIR maintenance measurement reports.
Range:
on
off
Default:
No change to the current value
System Default:
off
mtcheir (optional)
Activates or deactivates the automatic generation and FTP transfer of the scheduled hourly maintenance measurement report for Equipment Identity Register (EIR).
Range:
on
off
Default:
No change to the current value
System Default:
off
mtchenum (optional)
Activates or deactivates the automatic generation and FTP transfer of the hourly ENUM NP maintenance measurement reports.
Range:
on
off
Default:
No change to the current value
System Default:
off
mtchgttapath (optional)
Activates or deactivates the automatic generation and FTP transfer of the scheduled hourly maintenance measurement report for GTT Action per path measurements.
Range:
on
off
Default:
No change to the current value
System Default:
off
mtchgttset (optional)
Activates or deactivates the automatic generation and FTP transfer of the scheduled hourly per GTTSET maintenance measurement report.
Range:
on
off
Default:
No change to the current value
System Default:
off
mtchlnp (optional)
Activates or deactivates the automatic generation and FTP transfer of the scheduled hourly maintenance measurement report for LNP.
Range:
on
off
Default:
No change to the current value
System Default:
off
mtchmap (optional)
Activates or deactivates the automatic generation and FTP transfer of scheduled hourly maintenance measurement report per GSM MAP Screening server entry.
Range:
on
off
Default:
No change to the current value
System Default:
off
mtchnp (optional)
Activates or deactivates the automatic generation and FTP transfer of the scheduled hourly maintenance measurement report for INP.
Range:
on
off
Default:
No change to the current value
System Default:
off
mtchvflex (optional)
Activates or deactivates the automatic generation and FTP transfer of the scheduled hourly maintenance measurement report for V-Flex (Voice Mail Router).
Range:
on
off
Default:
No change to the current value
System Default:
off
off (optional)
This parameter turns off the specified options. Up to 8 comma-separated unique options can be specified.
Range:
mtcdaiq
mtcdatinpq
mtcddeir
mtcdeir
mtcdenum
mtcdgttapath
mtcdgttset
mtcdlink
mtcdlnkset
mtcdlnp
mtcdmap
mtcdnp
mtcdsctpasoc
mtcdsctpcard
mtcdsfthrot
mtcdsip
mtcdstp
mtcdua
mtcdvflex
mtchaiq
mtchatinpq
mtchdeir
mtcheir
mtchenum
mtchgttapath
mtchgttset
mtchlnp
mtchmap
mtchnp
mtchvflex
on (optional)
This parameter turns on the specified options. Up to 8 comma-separated unique options can be specified.
Range:
mtcdaiq
mtcdatinpq
mtcddeir
mtcdeir
mtcdenum
mtcdgttapath
mtcdgttset
mtcdlink
mtcdlnkset
mtcdlnp
mtcdmap
mtcdnp
mtcdsctpasoc
mtcdsctpcard
mtcdsfthrot
mtcdsip
mtcdstp
mtcdua
mtcdvflex
mtchaiq
mtchatinpq
mtchdeir
mtcheir
mtchenum
mtchgttapath
mtchgttset
mtchlnp
mtchmap
mtchnp
mtchvflex

Example

chg-mtc-measopts:mtcdeir=off:mtcheir=on

chg-mtc-measopts:mtchvflex=on:mtcdvflex=on

chg-mtc-measopts:mtchaiq=on:mtcdaiq=on

chg-mtc-measopts:on=mtcdaiq,mtcdatinpq,mtcdeir,

mtcdgttapath,mtcdlink,mtcdlnkset,mtcdlnp,mtcdmap

chg-mtc-measopts:off=mtcdsctpcard,mtcdstp

mtcdua,mtcdvflex,mtchaiq:on=mtchlnp,mtchmap

chg-mtc-measopts:mtcdsip=on

chg-mtc-measopts:on=mtchdeir,mtcddeir

chg-mtc-measopts:mtchdeir=on:mtcddeir=on

chg-mtc-measopts:on=mtcdenum,mtchenum

chg-mtc-measopts:mtchenum=on:mtcdenum=off

chg-mtc-measopts:mtcdsfthrot=on

chg-mtc-measopts:mtchgttset=on:mtcdgttset=on

Dependencies

The LNP feature must be turned on before the mtchlnp=on or mtcdlnp=on parameter can be specified.

The GSM Map Screening (GSMSCR) feature must be turned on before the mtcdmap=on parameter or the mtchmap=on parameter can be specified.

The Equipment Identity Register (EIR) feature must be turned on before the mtcheir=on parameter or the mtcdeir=on parameter can be specified.

This command is not allowed while in upgrade mode.

The V-Flex feature must be turned on before the mtchvflex=on parameter or the mtcdvflex=on parameter can be specified.

The ATINP feature must be enabled before the mtchatinpq=on parameter or the mtcdatinpq=on parameter can be specified.

The A-Port, G-Port, IS41 GSM Migration, MO SMS IS41-to-GSM Migration, MO-based GSM SMS NP, MO-based IS41 SMS NP, Prepaid SMS Intercept Ph1, TIF ASD, TIF GRN, TIF Number Portability, or TIF Simple Number Substitution feature must be enabled, or the INP feature must be turned on before the mtchnp=on parameter or the mtcdnp=on parameter can be specified.

The ANSI41 AIQ feature must be enabled before the mtchaiq=on or mtcdaiq=on parameter can be specified.

The Integrated Measurements or Measurements Platform feature must be turned on before this command can be entered.

The GTT Action - DISCARD, GTT Action - FORWARD, or GTT Action - DUPLICATE feature must be enabled before the mtchgttapath=on or mtcdgttapath=on parameter can be specified.

At least one GTT Action - SFTHROT must be provisioned before the mtcdsfthrot=on parameter is specified.

The same option cannot be specified for the on and off parameters in the same command.

Parameters cannot be specified individually and as options for the on or off parameter in the same command.

The Diameter S13/S13' Interface for EIR feature (DEIR) must be turned on before the mtchdeir=on parameter or the mtcddeir=on parameter can be specified.

At least one ENUM card must be provisioned before the mtchenum=on or mtcdenum=on parameter can be specified.

The EGTT feature must be turned ON before mtchgttset=on or mtcdgttset=on parameter can be specified.

Notes

Activated scheduled reports are generated and transferred to the customer’s FTP server

The rept-ftp-meas command can be used to manually generate and transfer one report at a time as needed.

Maintenance Guide provides detailed information on measurements and measurement reports.

on/off options

mtcdaiq
Allows automatic generation and FTP transfer of the scheduled daily maintenance measurement report for ANSI41 Analyzed Information Query (ANSI41 AIQ). The option has a default of OFF.
mtcdatinpq
Allows automatic generation and FTP transfer of the scheduled daily maintenance measurement report for ATI Number Portability Query (ATINP). The option has a default of OFF.
mtcddeir
Allows automatic generation and FTP transfer of the scheduled daily maintenance measurement report for S13 EIR. The option has a default of OFF.
mtcdeir
Allows automatic generation and FTP transfer of the daily maintenance measurement report for Equipment Identity Register (EIR). The option has a default of OFF.
mtcdenum
Allows automatic generation and FTP transfer of the scheduled daily maintenance measurement report for ENUM NP. The option has a default of OFF.
mtcdgttapath
Allows automatic generation and FTP transfer of the scheduled daily maintenance measurement report for GTT Action per path measurements. The option has a default of OFF.
mtcdgttset
Allows automatic generation and FTP transfer of the scheduled daily maintenance measurement report per GTTSET. The option has a default of OFF.
mtcdlink
Allows automatic generation and FTP transfer of the daily maintenance measurement report for links. The option has a default of OFF.
mtcdlnkset
Allows automatic generation and FTP transfer of the daily maintenance measurement report for link sets. The option has a default of OFF.
mtcdlnp
Allows automatic generation and FTP transfer of the scheduled daily maintenance measurement report for LNP. The option has a default of OFF.
mtcdmap
Allows automatic generation and FTP transfer of the scheduled daily maintenance measurement report per GSM MAP Screening server entry. The option has a default of OFF.
mtcdnp
Allows automatic generation and FTP transfer of the scheduled daily maintenance measurement report for INP. The option has a default of OFF.
mtcdsctpasoc
Allows automatic generation and FTP transfer of the scheduled daily maintenance measurement report for per association SCTP data. The option has a default of OFF.
mtcdsctpcard
Allows automatic generation and FTP transfer of the scheduled daily maintenance measurement report for per card SCTP data. The option has a default of OFF.
mtcdsfthrot
Allows automatic generation and FTP transfer of the scheduled daily maintenance measurement report for GTT SFTHROT Action measurements. The option has a default of OFF.
mtcdsip
Allows automatic generation and FTP transfer of the daily maintenance measurement report for SIP. The option has a default of OFF.
mtcdstp
Allows automatic generation and FTP transfer of the daily maintenance measurement report for STP. The option has a default of OFF.
mtcdua
Allows automatic generation and FTP transfer of the scheduled daily maintenance measurement report for M3UA and SUA application server/association pairs. The option has a default of OFF.
mtcdvflex
Allows automatic generation and FTP transfer of the daily maintenance measurement report for V-Flex (Voice Mail Router). The option has a default of OFF.
mtchaiq
Allows automatic generation and FTP transfer of the scheduled hourly maintenance measurement report of ANSI41 Analyzed Information Query (ANSI41 AIQ). The option has a default of OFF.
mtchatinpq
Allows automatic generation and FTP transfer of the scheduled hourly maintenance measurement report of Any Time Interrogation (ATI) Number Portability (NP) Queries. The option has a default of OFF.
mtchdeir
Allows automatic generation and FTP transfer of the scheduled hourly maintenance measurement report for S13 EIR. The option has a default of OFF.
mtcheir
Allows automatic generation and FTP transfer of the scheduled hourly maintenance measurement report for Equipment Identity Register (EIR). The option has a default of OFF.
mtchenum
Allows automatic generation and FTP transfer of the scheduled hourly maintenance measurement report for ENUM NP. The option has a default of OFF.
mtchgttapath
Allows automatic generation and FTP transfer of the scheduled hourly maintenance measurement report for GTT Action per path measurements. The option has a default of OFF.
mtchgttset
Allows automatic generation and FTP transfer of the scheduled hourly maintenance measurement report per GTTSET. The option has a default of OFF.
mtchlnp
Allows automatic generation and FTP transfer of the scheduled hourly maintenance measurement report for LNP. The option has a default of OFF.
mtchmap
Allows automatic generation and FTP transfer of scheduled hourly maintenance measurement report per GSM MAP Screening server entry. The option has a default of OFF.
mtchnp
Allows automatic generation and FTP transfer of the scheduled hourly maintenance measurement report for INP. The option has a default of OFF.
mtchvflex
Allows automatic generation and FTP transfer of the scheduled hourly maintenance measurement report for V-Flex (Voice Mail Router). The option has a default of OFF.

Output

chg-mtc-measopts:mtchgttapath=on:mtcdgttapath=on

    tekelecstp 10-02-11 14:31:25 EST  EAGLE 44.0.0
    CHG-MTC-MEASOPTS: MASP A - COMPLTD 
;
chg-mtc-measopts:on=mtcdaiq,mtcdatinpq,mtcdeir, mtcdgttapath,mtcdlink:off=mtcheir,mtchgttapath,mtchlnp

    tekelecstp 10-02-11 14:31:25 EST  EAGLE 44.0.0
    CHG-MTC-MEASOPTS: MASP A - COMPLTD 
;
chg-mtc-measopts:mtcdsip=on

    tekelecstp 12-07-26 14:55:58 EST EAGLE 45.0.0
    chg-mtc-measopts:mtcdsip=on
    Command entered at terminal #4.
    CHG-MTC-MEASOPTS: MASP A - COMPLTD.
;
chg-mtc-measopts:mtchdeir=on:mtcddeir=on
    
    tekelecstp 13-03-15 14:55:58 EST EAGLE 45.1.0
    chg-mtc-measopts:mtchdeir=on:mtcddeir=on
    Command entered at terminal #4.
    CHG-MTC-MEASOPTS: MASP A - COMPLTD
; 
chg-mtc-measopts:mtchenum=on:mtcdenum=off

    tekelecstp 14-05-18 14:55:58 EST EAGLE 46.1.0
    chg-mtc-measopts:mtchenum=on:mtcdenum=off
    Command entered at terminal #4.
    CHG-MTC-MEASOPTS: MASP A - COMPLTD
;
chg-mtc-measopts:mtcdsfthrot=on
tekelecstp 15-03-15 14:55:58 EST EAGLE 46.3.0
    chg-mtc-measopts:mtcdsfthrot=on
    Command entered at terminal #4.
    CHG-MTC-MEASOPTS: MASP A - COMPLTD
;
chg-mtc-measopts:mtchgttset=on:mtcdgttset=on
tekelecstp 17-05-11 15:55:48 EST EAGLE 46.6.0
    chg-mtc-measopts:mtchgttset=on:mtcdgttset=on
    Command entered at terminal #4.
    CHG-MTC-MEASOPTS: MASP A - COMPLTD
;