4.138 chg-sipopts

Use this command to change SIP configuration. This command updates the SIPOPTS table.

Parameters

nplkupfail (optional)
This parameter indicates whether 302 or 404 response is sent, when DN is not found in RTDB lookup.
Range:
302
Redirection response.
404
This parameter indicates that RTDB lookup was unsuccessful and DN was not found.
Default:
No change to the current value
System Default:
404
nprspfmt (optional)
This parameter defines format of URI in Contact header, when INCLUDERN is OFF.
Range:
rn
Routing Number
rndn
RN+DN
ccrndn
CC+RN+DN
rnasddn
RN+ASD+DN
rnasd
RN+ASD
grnasd
GRN+ASD
rngrndn
RN+GRN+DN
Default:
No change to the current value.
System Default:
rndn
off (optional)
This parameter turns off the specified options.
Range:
includenpdi
This option indicates to exclude "npdi" parameter in the response in cases where the RTDB dip is successfully performed.
includern
This option indicates to exclude "rn" parameter in the response in cases where the RTDB dip is successfully performed.
on (optional)
This parameter turns on the specified options.
Range:
includenpdi
This option indicates to include "npdi" parameter in the response in cases where the RTDB dip is successfully performed.
includern
This option indicates to include "rn" parameter in the response in cases where the RTDB dip is successfully performed.
rncontext (optional)
This parameter describes the rncontext (if RN is local or global). If rncontext is NULL it indicates RN is global.
Range:
zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
A string of 1 to 64 characters.
Default:
No change to the current value
System Default:
null
rnfmt (optional)
This parameter defines format of Routing Number (RN) in the 302 response, when INCLUDERN is ON.
Range:
rn
Routing Number
rnasd
RN+ASD
grnasd
GRN+ASD
rngrndn
RN+GRN+DN
Default:
No change to the current value
System Default:
rn

Example

chg-sipopts:on=includenpdi

chg-sipopts:nprspfmt=rndn:off=includern,includenpdi

chg-sipopts:rnfmt=rnasd:nplkupfail=302:rncontext=abc.com

Dependencies

SIPNP Feature must be enabled before changing any SIP configuration.

SIPOPTS table should be accessible.

At least one optional parameter must be specified.

The same option cannot be specified for the on and off parameters in the same command.

Only the defined values must be given for the parameters nplkupfail, rnfmt, on, off and nprspfmt.

Output

chg-sipopts:on=includenpdi


tekelecstp 12-06-22 17:25:00 EST  EAGLE 45.0.0    
chg-sipopts:on=includenpdi    
Command entered at terminal #4.    
CHG-SIPOPTS: MASP A - COMPLTD 

;