4.147 chg-tatr-msg

Use this command to revise a Triggerless ANSI TCAP Relay message.

Parameters

msgn (mandatory)
Message number. The number of the TATR message.
Range:
1 - 10
active (optional)
This parameter specifies whether the TATR message is sent to the network card for processing.
Range:
yes
The message is sent to the network card.
no
The message is not sent to the network card.
Default:
No change to the current value
System Default:
no
cdpadgts (optional)
Called party address digits. This parameter specifies the SCCP CdPA digits for the IAR message.
Range:

1 - 15 hexadecimal digits. Valid digits are 0-9, a-f, A-F

Default:
No change to the current value
cdpagt (optional)
Called party address global title. The SCCP CdPA GT for the IAR message.
Range:
0 - 15
Default:
No change to the current value
cdpagtnai (optional)
Called party address global title nature of address indicator. The SCCP CdPA GT NAI for the IAR message.
Range:
0 - 127
Default:
No change to the current value
cdpndgts (optional)
Called party number digits. The TCAP CdPN digits for the IAR message.
Range:

1 - 32 hexadecimal digits. Valid digits are 0-9, a-f, A-F

Default:
No change to the current value
cdpnnai (optional)
Called party number Nature of Address Indicator. The value for TCAP CdPN NAI value for the IAR message.
Range:
0 - 255
Default:
No change to the current value
cgpadgts (optional)
Calling party address digits. The SCCP CgPA digits for the IAR message.
Range:

1 - 15 hexadecimal digits. Valid digits are 0-9, a-f, A-F

Default:
No change to the current value
cgpagt (optional)
Calling party address global title. The SCCP CgPA GT for the IAR message.
Range:
0 - 15
Default:
No change to the current value
cgpagtnai (optional)
Calling party address global title nature of address indicator. The SCCP CgPA GT NAI for the IAR message.
Range:
0 - 127
Default:
No change to the current value
cgpndgts (optional)
Calling party number digits. The TCAP CgPN digits in the IAR message.
Range:

1- 32 hexadecimal digits. Valid digits are 0-9, a-f, A-F

Default:
No change to the current value
cgpnnai (optional)
Calling party number nature of address indicator. The TCAP CgPN NAI in the IAR message.
Range:
0 - 255
Default:
No change to the current value
reset (optional)
This parameter resets all of the parameters to their default values.
Range:
yes
Resets all message parameters to their default values
Default:
No change to the current value
trigtype (optional)
Trigger Type. The value for the TrigType field of the IAR message.
Range:
0 - 255

The value for this parameter can be entered as a decimal value ( 0-255 ) or as 2 hexadecimal digits. Valid digits are 0-9, a-f, A-F.

If hexadecimal digits are used, then the digits must be preceded by h'. Table 4-23  lists valid hexadecimal values.

Default:
No change to the current value

Example

chg-tatr-msg:msgn=1:trigtype=h'26:cdpnnai=4:cdpadgts=12457896abcd:cgpnnai=4

chg-tatr-msg:msgn=1:trigtype=12:cdpnnai=2:cdpndgts=981123456:active=yes

Dependencies

The IAR Base feature must be enabled before this command can be entered.

The TSTMSG table is corrupt or cannot be found.

If the reset parameter is specified, then no other parameters can be specified.

At least one optional parameter must be specified.

Output

chg-tatr-msg:msgn=1:trigtype=37:cdpnnai=4:cdpndgts=987654321:cgpnnai=4 

    tekelecstp 09-07-07 15:58:08 EST  EAGLE 41.1.0
    CHG-TATR-MSG: MASP A - COMPLTD 
;

Related Topics