4.163 chg-vlr-roaming

Use this command to change a Visitor Location Register (VLR) roaming entry for a mobile subscriber. A VLR-Roaming entry uses existing entries for both new as well as old entries from vlr-prof table.

Parameters

oldvlr (mandatory)
VLR Number from which mobile subscriber has moved, hexadecimal digit GT number with variable length (1 to 16). 
Range:

Hexadecimal digit string 1 to 16 digits

newvlr (mandatory)
VLR Number to which mobile subscriber has moved, hexadecimal digit GT number with variable length (1 to 16).
Range:

Hexadecimal digit string 1 to 16 digits

time (mandatory)
Duration for which the roaming must occur. Time is in minutes.
Range:
1-1440

Example

chg-vlr-roaming:oldvlr=1234:newvlr=56545:time=20

Dependencies

VLR_PROF table must be accessible.

VLR DBMM table must be accessible.

VLR_ROAM table must be accessible.

OLDVLR and NEWVLR parameter length must be in the range 1 to 5 digits as per current restriction.

OLDVLR or NEWVLR parameter must be existing in VLR-PROF table

The entry should be existing in VLR_ROAM table

Output

chg-vlr-roaming:oldvlr=1234:newvlr=56545:time=20
tekelecstp 17-11-23 16:23:44 MST  EAGLE 46.5.1.5.0-73.2.0
    chg-vlr-roaming:oldvlr=1234:newvlr=56545:time=20
    Command entered at terminal #17.
;

    tekelecstp 17-11-23 16:23:44 MST  EAGLE 46.5.1.5.0-73.2.0
    CHG-VLR-ROAMING: MASP A - Cannot access standby fixed disk.
    CHG-VLR-ROAMING: MASP A - Simplex database update.
Command Accepted - Processing

    VLR-ROAMING table is (1 of 1000) 1% full.

;
    tekelecstp 17-11-23 16:23:44 MST  EAGLE 46.5.1.5.0-73.2.0
    CHG-VLR-ROAMING: MASP A - COMPLTD
;