4.192 dlt-card
Use this command to remove a card entry from the system database.
Parameters
- loc (mandatory)
- The card location as stenciled on the shelf of the
system.
- Range:
- 1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118, 6201 - 6208, 6211 - 6218, 6301 - 6308, 6311 - 6318
Example
dlt-card:loc=1201
dlt-card:loc=6201
Dependencies
The card location slot must be between 1 - 18, but not 9 or 10.
The card location cannot be 1113–1118.
The shelf location must be 11xx, 12xx, 13xx, 21xx, 22xx, 23xx, 31xx, 32xx, 33xx, 41xx, 42xx, 43xx, 51xx, 52xx, 53xx, 61xx, 62xx, or 63xx.
The shelf and card must be equipped.
Before this command can be entered, all TCP/IP data links assigned to the card must be deleted.
Before an E1 card can be deleted, any E1 interfaces assigned to the card must be deleted.
Before a T1 card can be deleted, any T1 interfaces assigned to the card must be deleted.
After the links are deleted, the card must be inhibited
before it can be deleted. Use the
inh-card
command to set the card to the OOS-MT-DSBLD state.
Before this command can be entered, SS7 signaling links assigned to the card must be deleted. E5-APP-B cards do not need to be inhibited first before they can be deleted.
Only one database change, action, backup, or restore can be in progress at a time.
The E1/T1 table must be accessible.
The Shelf table must be accessible.
The Card (IMT) table must be accessible.
The Link table must be accessible.
Before a J1 card can be deleted, any J1 interfaces assigned to the card must be deleted.
Before deleting the SFLOG card, the SFLOG action must be deleted from the GTT Action table.
Notes
If a SEAS terminal is configured for a location, then
entering the
dlt-card
command causes the warning
“Invalidating the Terminal data in SEASCFG table” to appear.
Output
dlt-card:loc=1201
rlghncxa03w 04-01-07 11:11:28 EST EAGLE 31.3.0
DLT-CARD: MASP A - COMPLTD
;
dlt-card:loc=6201
tekelecstp 13-02-28 12:40:29 EST 45.0.0
DLT-CARD: MASP A - COMPLTD
;
Related Topics